Products – tagged "EV" – ITS Technologies

Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit £715 + VAT £858.00 incl. VAT

Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit #1: MYEN-ZAPPI-2H22UB-PACK #3: 4805#5055 To be OLEV Smart compliant an additional hub is required. Zappi 22kW 3ph Data Sheet Zappi 22kW 3ph User Manual Zappi Declaration of Conformity *Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. myenergi Retrofit Tamper Kit Included Key Features For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty

Eco-smart Single Phase EV Charge Point 7kW Untethered Black with Tamper Kit £612 + VAT £734.40 incl. VAT

Eco-smart Single Phase EV Charge Point 7kW Untethered Black with Tamper Kit #1: MYEN-ZAPPI-2H07UB-PACK #3: 4850#5060 Zappi 7kW 3ph Data Sheet Zappi 7kW 3ph User Manual Zappi Declaration of Conformity *Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. myenergi Retrofit Tamper Kit Included Key Features Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty

EVSE test box for zappi RCD testing £250 + VAT £300.00 incl. VAT

EVSE test box for zappi RCD testing #1: MYEN-EVSE-TSET-BOX #3: 2948 EVSE Test Box Datasheet *Collections are not permitted due to health & safety regulations* The EVSE test box can be used to test zappi EV chargers and other AC chargepoints along with a multifunction electrical tester (not supplied).Can test type 1 or type 2 connectionsSuitable for single phase and three phase zappisRCD test is carried out with test box and user's multifunction electrical tester

2 GivEnergy 7kW EV Charger tethered 5m cable - Charge from excess PV generation £398 +VAT £477.60 incl. VAT

Givenergy 7kW EV Charger tethered - Charge from excess PV generation#2: GIV-EVCHARGER EV Charger Tethered - 5m Cable#3: 5383 GivEnergy 7kW Brochure GivEnergy 7kW Datasheet GivEnergy 7kW Manual GivEnergy 7kW Warranty *Collections are not permitted due to health & safety regulations* Part No: GIV-EVCHARGER EV Charging - EV Charger The EV Charger is a new member of the GivEnergy family. Compatible with most plug-in electric cars, the EV charger is a great addition to your smart home system and GivEnergy eco-system. It's compact and waterproof design allows for installation in tight spaces both indoor and outdoor. Integrated WiFi allows for easy control of your vehicle's charge via the GivEnergy Monitoring Portal or App.Grid Power - Schedule your charing for the cheapest, cleanest off-peak energy Renewable Power - Charge your EV for the free using excess solar, wind, or hydro generation Battery Power - Manipulate the flow of energy from your storage battery to your EV charger Features: 7kW / 32A AC power output rating 5m charging cable length Plug and Play App Controlled Integrated PEN Protection Solar Diversion 5m Type 2 Connector Cable LAN(RJ-45), WiFi and 4G Connectivity Dimensions: 288 x 260 x 112 (mm)

4 Myenergi - HUB : Myenergy Hub (for wireless monitoring & updates) £80 + VAT £95.84 incl. VAT

Myenergi - HUB : Myenergy Hub #1: MYEN-HUB#3: 2878 *Collections are not permitted due to health & safety regulations* MyEnergi HUB for Eddi and Zappi The MyEnergi Hub adds wireless monitoring to your Zappi and Eddi system. Through the app you can seamlessly track the use of your surplus energy to power your car or heating. The Hub also checks for and downloads the latest software updates from MyEnergi, meaning that your system will be as up-to-date as possible and you can take full advantage of any new features. With the Hub you can introduce the MyEnergi app allowing control of monitoring on your mobile device. Change your Zappo charging modes, pre-set your heating and hot water for your Eddi and observe domestic live energy flow.Key Features- Remotely control and monitor your MyEnergi devices- Access to the latest firmware updates- Devise status LEDs- Will support time of use tariffs in the near future- Required for zappi OLEV approval

1 Myenergi Current Transformer for solar/wind with 5m cable (100A 16mm) £14 +VAT £16.26 incl. VAT

Myenergi Current Transformer with 5m cable (100A 16mm)#1: MYEN-CT100-16-05 EV Charging - Monitoring and Control#3: 2623#4: CT100-16-05 or MY-500116 Current transformer and 5m cable assembly for use with myenergi harvi, eddi and zappi.Additional clamp is required if you want to monitor realtime PV/wind generation with your eddi or zappi.

Myenergi eddi 2.1 - Energy Diverter (wifi enabled) £355 + VAT

Myenergi EDDI Energy Diverter Diverts surplus solar energy to your hot water - I.T.S Technologies

Myenergi eddi 2.1 - Energy Diverter (wifi enabled) £355 + VAT £426.00 incl. VAT

Myenergi EDDI Energy Diverter. #1A: MYEN-EDDI-16A1P02H Eddi 2.1 Data Sheet Eddi 2.1 Installation Manual Eddi 2.1 User Manual *Collections are not permitted due to health & safety regulations* The My Energi Eddi is a remarkable and effective energy saving device. Eddi Diverts surpluses power from your solar energy system and uses it to heat your water or rooms. This helps you to save energy and minimise your utility bills. Compatible will all renewable generation technologies and easy to install. My energy are market leaders driven by continues development and sustainable solutions. Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty Eddi Feautures: 3.68kW / 16A max heater load Expansion module option – 2 extra outputs with temperature control Integral bypass switch Graphical back-lit LCD screen for ease of use Fan-less cooling Built-in programmable boost timers VariSineTM PWM technology Supports two heaters (sequentially) Wall mounting bracket for ease of installation Overload and short-circuit protection Ethernet port and built-in WiFi for connecting to the internet Complies with CE and UKCA Requirements Works alongside battery storage systems Energy monitoring on the go via the myenergi app

Myenergi Harvi - energy harvesting wireless sensor £50+ VAT

1 Myenergi Harvi - energy harvesting wireless sensor £50+ VAT £60.00 incl. VAT

Myenergi Harvi - energy harvesting wireless sensor#0: RS#1: MYEN-HARVI-65A3P EV Charging - Monitoring and Control #3: 2622 #: MY-200200 Harvi Data Sheet Harvi Insallation Guide Harvi User Manual *Collections are not permitted due to health & safety regulations* Harvi is a clever little device that enables the Zappi and Eddi products to be installed without using a directly wired current transformer CT for measuring the grid and or generation power; instead the CT is connected to Harvi. No power source is needed for Harvi - the energy from the CT is harvested and used to transmit the measurement signal to the Zappi or Eddi. This means batteries or electrical wiring are eliminated!Up to three devices can be monitored by the Harvi. You will need to buy a Zappi, Eddi or separate CT Clamp for the Harvi to work.Range 30m max indoors 100m clear line of sight. Think about positioning and avoid metal obstacles

1 SolarEdge Zigbee Module for Home Energy Management (Set APP ) £57 + VAT £68.40 incl. VAT

SolarEdge Zigbee Module for Home Energy Management ( Set APP )#1: SE-ZBSLV-B-S1-RW Accessories - Smart PlugsWireless Smart Energy Solution- ZigBee plug-in supports Smart Energy applications in Inverters with SetApp configuration- Functions as Smart energy network manager- ZigBee Plug-in supports up to 10 Smart Energy devices- Antenna external to inverter for wider range- ZigBee Plug-in installed within the inverter enclosure for outdoor resilience

SolaX Smart 11kW EV Charger - Tethered £395.50 +VAT

SolaX Smart 11kW EV Charger - Tethered £395.50 +VAT £474.60 incl. VAT

SolaX Smart 11kW EV Charger - Tethered #2 SOLAX-X3-EVC-11K EV Charging - EV Charging Inverter SolaX EVC Data Sheet SolaX EVC Install Guide SolaX EVC User Manual SolaX EVC Warranty With the SolaX EV charger you can charge your EV with 3 different charging modes and integrate into your SolaX smart home systems using the Solax app. EV charging capable from 100% of your PV energy on green mode. The SolaX EV Charger also incorporates integrated PEN protection and RFID functionality. Green Mode: Charger with PV energy Fast Mode: charge at the fastest rate ECO Mode: Charge with a fixed power *Collections are not permitted due to health & safety regulations* Features Plug or socket outlet selectable Integrated current failure monitoring (30mA AC & 6mA DC) Integrated with PEN protection and no earth rod Encrypted communication based on TLS Indoor and outdoor easy installation Form an intelligent photovoltaic, storage and EV charging energy system through the communication between the smart EV charger and SolaX inverter. Capable with 100% green energy generated by solar or wind generation. Integrated RFID function Remote setting and monitoring with APP and website Smart dynamic load balance control Set timers to reduce your cost during peak and valley price Wi-Fi 2.4GHz connectivity Specs: Weight: 10.5kg

SolaX Smart 7.2kW EV Charger - Tethered £370.50 +VAT

SolaX Smart 7.2kW EV Charger - Tethered £370.50 +VAT £444.60 incl. VAT

SolaX Smart 7.2kW EV Charger - Tethered #2: SOLAX-X1-EVC-7.2K EV Charging - EV Charging Inverter SolaX EVC Data Sheet SolaX EVC Install Guide SolaX EVC User Manual SolaX EVC Warranty With the SolaX EV charger you can charge your EV with 3 different charging modes and integrate into your SolaX smart home systems using the Solax app. EV charging capable from 100% of your PV energy on green mode. The SolaX EV Charger also incorporates integrated PEN protection and RFID functionality. Green Mode: Charger with PV energy Fast Mode: charge at the fastest rate ECO Mode: Charge with a fixed power *Collections are not permitted due to health & safety regulations* Features Plug or socket outlet selectable Integrated current failure monitoring (30mA AC & 6mA DC) Integrated with PEN protection and no earth rod Encrypted communication based on TLS Indoor and outdoor easy installation Form an intelligent photovoltaic, storage and EV charging energy system through the communication between the smart EV charger and SolaX inverter. Capable with 100% green energy generated by solar or wind generation. Integrated RFID function Remote setting and monitoring with APP and website Smart dynamic load balance control Set timers to reduce your cost during peak and valley price Wi-Fi 2.4GHz connectivity Specs: Weight: 10.5kg

Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered £444 + VAT £533.17 incl. VAT

Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered #2: S-WALLCONNECTOR-G3 EV Charging - EV Charger Tesla Datasheet Tesla Manual *Collections are not permitted due to health & safety regulations* Tesla Gen 3 Wall Connector Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months

Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection £581 + VAT £697.10 incl. VAT

Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection #2: TES-WALLCONNECTOR-G3-PACK EV Charging - EV Charging Package Tesla Datasheet Tesla Manual *Collections are not permitted due to health & safety regulations* Tesla Gen 3 Wall Connector Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months Includes Single Phase Monitoring and Protection Device with Terminals

Zappi Single Phase EV Charge Point 7kW Type 2 Tethered Black £651 +VAT £781.54 incl. VAT

Zappi Single Phase EV Charge Point 7kW Type 2 Tethered Black #1: MYEN-ZAPPI-2H07TB-G EV Charging - EV Charger #4: ZAPPI-2H07TB-G Zappi 7kW 3ph Data Sheet Zappi 7kW 3ph User Manual Zappi 7kW 3ph Installation Manual *Collections are not permitted due to health & safety regulations* Charge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.Zappi G range now featuring Front Lid Tamper Detection Compliant with UK Electric Vehicle (Smart Charge Points) Regulations Automatic Firmware Checking Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty Built in Wifi and ethernet socket, for connection to the internet (no Hub required)

Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White £651 +VAT

Zappi EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart - I.T.S Technologies

Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White £651 +VAT £781.54 incl. VAT

Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White #1: MYEN-ZAPPI-2H07TW-G New version with tamper kit for new UK regulations Zappi V2 Data Sheet Zappi V2 User Manual Zappi V2 Declaration of Conformity *Collections are not permitted due to health & safety regulations* 7kW Type 2 Tethered EV Charger in WhiteCharge your EV with your PV!Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.NEW Zappi G range now featuring Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warrantyClick here to view Myenergi product training webinarBuilt in Wifi and ethernet socket, for connection to the internet (no Hub required)NOTICE: For any training requirements, please contact training@myenergi.com

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White with Tamper Kit £685 +VAT £822.00 incl. VAT

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White with Tamper Kit #2: MYEN-ZAPPI-2H22TW-PACK #3: 4804#5052 New version with tamper kit for new UK regulations Zappi Type 2 Data Sheet Zappi Type 2 User Manual Zappi Type 2 Declaration of Conformity To be OLEV Smart compliant an additional hub is required.*Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty myenergi Retrofit Tamper Kit Included

Find anything you need

Products (17)

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts