Products (944)

Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered #2: S-WALLCONNECTOR-G3 EV Charging - EV Charger Tesla Datasheet Tesla Manual *Collections are not permitted due to health & safety regulations* Installer accreditation is required from Tesla to purchase this item. Tesla Gen 3 Wall Connector Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months

Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection #2: TES-WALLCONNECTOR-G3-PACK EV Charging - EV Charging Package Installer accreditation is required from Tesla to purchase this item. Tesla Datasheet Tesla Manual *Collections are not permitted due to health & safety regulations* Tesla Gen 3 Wall Connector Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months Includes Single Phase Monitoring and Protection Device with Terminals

Tigo Cloud Connect Advanced Kit with TAP- Indoor #2: TIGO-CLOUDCON-TAP Display - Web Interfaces#3: 2672 Tigo Datasheet Tigo Manual Tigo Warranty *Collections are not permitted due to health & safety regulations* Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply.CLOUD CONNECT ADVANCED (CCA)COMPACT DATA LOGGER- Collect data from up to 900 TS4 units- Supports wired and wireless networks- Control monitoring and safety features- Configure and commission with Tigo SMART app- Monitor 3rd party devices via Modbus- Can communicate with up to 7 TAPsTIGO ACCESS POINT (TAP)WIRELESS ACCESS POINT- Collect data from up to 300 TS4 units- Wireless mesh communication- High definition sampling rate- Scalable architecture- Mounts easily on module frame without tools

Tigo Optimiser TS4 Add-On Module - Optimised #1: TS4-A-O Inverters - Optimisers#3: 2298 Tigo Optimiser Data Sheet Tigo Optimiser User Manual Tigo Optimiser Warranty Tigo Optimiser Certification Minimum order: 4 Units   PV Module Advanced Add-On/RetrofitThe TS4-A-O (Optimization) is the advanced add-on/retrofit optimization solution that brings smart module functionality to standard PV modules for higher reliability. Improve energy efficiency by upgrading underperforming PV systems or adding smart features to new installations.The TS4-A-O with UHD-Core technology and expanded specifications supports PV modules up to 500W.Easy InstallationSnap to standard module frame or remove brackets for rack mountingSmart CommissioningConfigure and commission with your Android or iOS mobile device

Victron Cerbo-S GX 8: VE.DIRECT-CABLE-1.8 #17: Victron VE.Direct Cable 1,8m The VE.Direct cable from Victron enables the connection of various Victron Energy products (including MPPT charge controllers, inverters, battery monitors) to the CCGX Color Control Monitor.

Victron Bluetooth Smart Dongle #17: Victron VE.Direct Bluetooth Smart dongle The Bluetooth Smart Connect Dongle from Victron allows wireless interface and monitoring of various Victron Energy products, including MPPT charge controller, inverter, battery monitors, via a compatible smartphone. This is similar to the MPPT Control Monitor, providing more details and is compatible with a larger array of products. Connection is simple; Once connected and paired using the Smart Connect app, (available from Google Play or the Apple Store), the connected device will stream live information to your smartphone. Please see the Victron Smart Connect Manual for a list of compatible products and smartphones. Please note that Android 4.3 and iOS8 are the minimum required software versions and the device must be Bluetooth 4.0 ready. Features Real-time monitoring of voltage, current and power Ultra low power consumption Provides logging data to smartphone Can be used to remotely update the firmware of compatible Victron products such as MPPT chargers

Victron Cerbo-S GX #17: Victron Cerbo-S GX (Cerbo-S GX Only) Victron Cerbo-S GX Datasheet Victron Cerbo-S GX Manual *Collections are not permitted due to health & safety regulations* The Cerbo-S GX does not have a BMS-CAN port, tank level inputs, or temperature sense inputs.This all-new communication centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, an MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Perfect monitoring & controlInstantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely.Maximise your system performanceThe Cerbo GX maximises the performance of your systems components in real-time and keeps them in perfect tune. With its Dual Core Processor and the addition of an extra CAN-bus port you can now support even bigger systems; closely follow managed lithium batteries while the second port can support up to 25 simultaneously connected VE.Can solar chargers. The new NMEA 2000-out support has the GX easily integrated into any boats network. Four tank and four temperature ports as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level. Expand your viewThe new optional GX Touch 50 display allows you to have an instant overview of your system and adjust settings very quickly. Its super slim 5 inch waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.Simple mounting and configurationThe Cerbo GX is now optimised to more than meet the standards of installer professionals. The device is easily mountable on a DIN-Rail (with DIN35 adapter small, not included) and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Its new Bluetooth feature enables a quick connection and configuration via our VictronConnect app.Outsmart any power challengeThe Cerbo GX serves many purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or Backup & Off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts, and diverts excess (solar) power to self-consumption.

Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX (2400W) G98 approved #20: PMP242307010 Victron EasySolar Data Sheet Victron EasySolar Manual   The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger • A SmartSolar MPPT -Tr solar charge controller • A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. • A USB port • An Ethernet port • A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.   The manual is available here: https://www.victronenergy.com/media/pg/EasySolar-II_GX/en/index-en.html The datasheet is available here: https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-24V-48V-3kVA-48V-5kVA-MPPT-250-70-100-GX-EN.pdf

Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX (4000W) G99 approved #20: PMP482507010 Victron EasySolar Data Sheet Victron EasySolar Manual   All-in-one solar power solution, 4000W inverter, 250/100 MPPT charge controller The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. The all-in-one solar power solutionThe Victron EasySolar-II GX integrates the following elements:• A MultiPlus-II inverter/charger• A SmartSolar MPPT -Tr solar charge controller• A GX device with a 2 x 16 character display.These elements come prewired together inside a single unit. This greatly simplifiesmost installations, saving time and money. Display and wifiThe display reads battery, inverter and solar charge controller parameters.The same parameters can be accessed with a smartphone or other wifi enabled device.In addition, wifi can be used to set up the system and to change settings. Solar charge controllerThe DC output of the SmartSolar MPPT is parallel wired with the DC connection of theMultiPlus-II inverter/charger.The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX deviceThe integrated GX device includes:• A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g.VE.Can MPPTs), or the port can be reconfigured via the Remote Console for usewith a compatible CAN-bus Li-ion Battery• A USB port• A Ethernet port• A VE.Direct portThe GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively aVE.Bus and a VE.Direct connection.

Victron EasySolar-II 48V 3000VA MPPT 250/70 GX #17: Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX (48V 3000VA) Victron EasySolar Data Sheet Victron EasySolar Manual   All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring saving you time and space.The 24V model contains two of the superb Blue Solar MPPT 100/50, allowing up to three strings of PV panels to be connected with three sets of MC4 PV connectors. The 48V model includes two of the Blue Solar 150/35 MPPT controllers for larger PV arrays.The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.AC distribution The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.Inverter specs:Input Voltage Range: 19-33V (24V);Continuous Output Power at 25 degrees C: 3000VA/2500WPeak Power: 6000WMaximum Efficiency: 94%Zero-Load Power: 15-16WCharger specs:AC Input: 187-265VAC 45-65HZCharger Current: 70A (24V); 35A (48V)Solar MPPT ControllerMax PV Open Circuit Voltage: 100V (24V);Max PV Power: 2 x 1400W (24V);Max Output Current: 2 x 50A;Enclosure:Weight: 21kgDimensions (h x w x d): 362 x 374 x 218 mm

Busbar kit for double   Cable pack & accessories required when using with a keto fuse connector (sold separately) *Collections are not permitted due to health & safety regulations* Package includes: 4 x BATCAB35-1M-PAIR - Pair of BATCAB35-1M 6 x LUG35-8 - 35mm2 Cable Terminal Lug M8 - Single 1 x Victron Lynx Power In Victron Lynx Power In    

Victron Lynx Power In M10 #17: Victron Lynx Power In Victron Lynx Distributor Manual  A modular DC bus bar, used to connect batteries to the Lynx DC distribution system, with locations for four DC fuses. The younger brother of the Lynx Distributor - upgrade to this one if you would like LED indicators for each fuse. Part of the modular Lynx distribution system.Victron use the highest grade of components, robust and precise manufacturing procedures, and rigorous testing to ensure consistent high quality.

Victron Lynx Power In M8 #17: Victron Lynx Power In Victron Lynx Distributor Manual  A modular DC bus bar, used to connect batteries to the Lynx DC distribution system, with locations for four DC fuses. The younger brother of the Lynx Distributor - upgrade to this one if you would like LED indicators for each fuse. Part of the modular Lynx distribution system.Victron use the highest grade of components, robust and precise manufacturing procedures, and rigorous testing to ensure consistent high quality.

Victron MultiPlus-II 12/5000/220-50 230V (4000W) #20: PMP122505010 Victron 230V GX Data Sheet Victron 230V GX Manual   Victron Multiplus II 12V, 4kW inverter/charger for use off grid on or on grid with 220A AC - DC Charger The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).  It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control Monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more...

Victron MultiPlus-II 24/3000/70-32 230V GX (2400W) Victron MultiPlus Data Sheet Victron MultiPlus Manual   Victron MultiPlus-II GX inverter/charger with GX inside and on board display An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device. Remote monitoring is also possible.

Victron MultiPlus-II 48/10000/140-100 230V #17: MultiPlus-II-48/10000/140-100 230V Victron 230V Data Sheet Victron 230V Manual *Collections are not permitted due to health & safety regulations* All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10000VA (8000W) Peak Power: 18000W Maximum Efficiency: 96% Zero-Load Power: 38W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A (48V) AC Transfer Relay: 100A M8 bolts (2 plus and 2 minus battery connections) Dimensions: 677 x 363 x 206mm Weight: 49kg Warranty: 5 years