SolarEdge Home Hot Water Controller, 5kW £420.00 +VAT
£504.00 incl. VAT
SolarEdge Home Hot Water Controller, 5kW
#2: SMRT-HOT-WTR-50-S2
SolarEdge Home Hot Water Datasheet
SolarEdge Home Hot Water Manual
SolarEdge Home Hot Warranty
*Collections are not permitted due to health & safety regulations*
Solar Edge Smart Energy Hot Water maximizes self-consumption by storing excess solar energy as hot water
Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamline logistics & operations.
Automatically adjusts power supplied to the heater, using any amount of available PV power (up to 5.0kW).
Wireless communication to the inverter using SolarEdge Home Network, reducing wiring, labor, and installation faults.
Built-in water tank power consumption meter.
Simple wall mount installation.
Suitable for powering purely resistive loads only.
Optional temperature sensor for optimized heating.
SolarEdge Home Hot Water Controller, 3kW £379.00 +VAT
£454.80 incl. VAT
SolarEdge Home Hot Water Controller, 3kW
#2: SMRT-HOT-WTR-30-S2
SolarEdge Home Hot Water Datasheet
SolarEdge Home Hot Water Manual
SolarEdge Home Hot Warranty
*Collections are not permitted due to health & safety regulations*
Solar Edge Smart Energy Hot Water maximizes self-consumption by storing excess solar energy as hot water
Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamline logistics & operations.
Automatically adjusts power supplied to the heater, using any amount of available PV power (up to 5.0kW).
Wireless communication to the inverter using SolarEdge Home Network, reducing wiring, labor, and installation faults.
Built-in water tank power consumption meter.
Simple wall mount installation.
Suitable for powering purely resistive loads only.
Optional temperature sensor for optimized heating.
Myenergi eddi 2.1 - Energy Diverter (wifi enabled) £368 + VAT
£441.97 incl. VAT
Myenergi EDDI Energy Diverter.
#1A: MYEN-EDDI-16A1P02H
Eddi 2.1 Data Sheet
Eddi 2.1 Installation Manual
Eddi 2.1 User Manual
*Collections are not permitted due to health & safety regulations*
The My Energi Eddi is a remarkable and effective energy saving device. Eddi Diverts surpluses power from your solar energy system and uses it to heat your water or rooms. This helps you to save energy and minimise your utility bills. Compatible will all renewable generation technologies and easy to install. My energy are market leaders driven by continues development and sustainable solutions.
Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty
Eddi Feautures:
3.68kW / 16A max heater load
Expansion module option – 2 extra outputs with temperature control
Integral bypass switch
Graphical back-lit LCD screen for ease of use
Fan-less cooling
Built-in programmable boost timers
VariSineTM PWM technology
Supports two heaters (sequentially)
Wall mounting bracket for ease of installation
Overload and short-circuit protection
Ethernet port and built-in WiFi for connecting to the internet
Complies with CE and UKCA Requirements
Works alongside battery storage systems
Energy monitoring on the go via the myenergi app
Myenergi Harvi - energy harvesting wireless sensor £46 + VAT
£54.76 incl. VAT
Myenergi Harvi - energy harvesting wireless sensor#0: RS#1: MYEN-HARVI-65A3P EV Charging - Monitoring and Control
#3: 2622
#: MY-200200
Harvi Data Sheet
Harvi Insallation Guide
Harvi User Manual
*Collections are not permitted due to health & safety regulations*
Harvi is a clever little device that enables the Zappi and Eddi products to be installed without using a directly wired current transformer CT for measuring the grid and or generation power; instead the CT is connected to Harvi. No power source is needed for Harvi - the energy from the CT is harvested and used to transmit the measurement signal to the Zappi or Eddi. This means batteries or electrical wiring are eliminated!Up to three devices can be monitored by the Harvi. You will need to buy a Zappi, Eddi or separate CT Clamp for the Harvi to work.Range 30m max indoors 100m clear line of sight. Think about positioning and avoid metal obstacles
SOLiC200 Solar Immersion diverter £181 +vat
£217.20 incl. VAT
SOLiC200 Solar Immersion Heater Controller#1: SOLiC200 Accessories - Immersion Controllers#3: 1965
Solic200 Controller Data Sheet
Solic200 Controller User Manual
*Collections are not permitted due to health & safety regulations*
The Award Winning SOLiC 200 from Earthwise Products Ltd automatically converts energy generated by existing PV panels into hot water by diverting excess solar power to the immersion heater before it's exported to the national grid.
Simple to use and maintenance free, the SOLiC 200 is self-contained, easy to install and can save the homeowner hundreds of pounds over the course of a year. The SOLiC 200 includes a 10 year return to base guarantee (*) see below, has been built to last 25 years, and has been designed, constructed and fully tested in Britain to the highest CE standards.The unit can be installed quickly and easily without the need for plumbing alterations using the installation manual which is downloadable below. Please note: this installation manual is for trade use and installers only. The SOLiC 200 has a zero export threshold and checks for excess power 20 times a second, ensuring maximum efficiency.Why buy the award-winning SOLiC 200 ?- Free hot water for your customers- Large potential market- Easy upsell on orders- Increase average order value- Revisit existing customers- 1000's installed in the UK and across Europe- Easy to install - typically under one hour- Add value to your product portfolio
- UK-based technical support from manufacturer- Proactive sales support(*) Please note to activate the 10 year warranty installer must fill in and send off the Warranty Card included in the box with the unit. This needs to be done within 28 days from the purchase, without this the unit will not be covered.
Solar iBoost + Wireless Solar Immersion Heater Controller £316 +VAT
£379.20 incl. VAT
Solar iBoost + Wireless Solar Immersion Heater Controller
#2: SOLAR-IBOOST-PLUS Accessories - Immersion Controllers
Solar iBoost User Manual
Solar iBoost Installer Manual
*Collections are not permitted due to health & safety regulations*
The Solar iBoost plus can be installed to your existing immersion heater. It has a remote switch that uses a wireless connection, so no additional wiring is required. The Solar iBoost is programmed to use the surplus photovoltaic energy generated at your home to heat your water tank and save you money.
Features:
Wireless / remoteEasy to install Cut the cost of heating your waterReduced use of your boiler
Buddy Monitor Version 2 (for iBoost Plus Immersion Controller) £112 +VAT
£134.40 incl. VAT
Buddy Monitor Version 2 (for iBoost Plus Immersion Controller)
#3: BUDDY-MONITOR Accessories - Immersion Controllers
Buddy Monitor User Manual
*Collections are not permitted due to health & safety regulations*
The version 2 of the popular buddy monitor. This device works as an optional extra for your iBoost, the iBoost Buddy. This will remotely monitor the Solar iBoost and let you know when it is heating your hot water and when there is spare power