Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection £581 + VAT
£697.10 incl. VAT
Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection
#2: TES-WALLCONNECTOR-G3-PACK EV Charging - EV Charging Package
Tesla Datasheet
Tesla Manual
*Collections are not permitted due to health & safety regulations*
Tesla Gen 3 Wall Connector
Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces.
Compatible with any Type 2 charge port
Schedule, manage and track charging from the Tesla app
Wi-Fi connectivity for over-the-air firmware updates
Up to 71 km of range per hour
Up to 22 kW with three-phase charging grids
Power sharing to support multiple Wall Connectors
Installation with single or three-phase grids
Tesla charge port opening from connector
7.3 m cable length
Warranty
Residentail personal use - 48 months
Commercial use - 12 months
Includes Single Phase Monitoring and Protection Device with Terminals
Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered £444 + VAT
£533.17 incl. VAT
Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered
#2: S-WALLCONNECTOR-G3 EV Charging - EV Charger
Tesla Datasheet
Tesla Manual
*Collections are not permitted due to health & safety regulations*
Tesla Gen 3 Wall Connector
Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces.
Compatible with any Type 2 charge port
Schedule, manage and track charging from the Tesla app
Wi-Fi connectivity for over-the-air firmware updates
Up to 71 km of range per hour
Up to 22 kW with three-phase charging grids
Power sharing to support multiple Wall Connectors
Installation with single or three-phase grids
Tesla charge port opening from connector
7.3 m cable length
Warranty
Residentail personal use - 48 months
Commercial use - 12 months
Zappi Single Phase EV Charge Point 7kW Type 2 Tethered Black £682.00 +VAT
£818.40 incl. VAT
Zappi Single Phase EV Charge Point 7kW Type 2 Tethered Black
#1: MYEN-ZAPPI-2H07TB-G EV Charging - EV Charger
#4: ZAPPI-2H07TB-G
Zappi 7kW 3ph Data Sheet
Zappi 7kW 3ph User Manual
Zappi 7kW 3ph Installation Manual
*Collections are not permitted due to health & safety regulations*
Charge your EV with your PV!
Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.Zappi G range now featuring
Front Lid Tamper Detection
Compliant with UK Electric Vehicle (Smart Charge Points) Regulations
Automatic Firmware Checking
Optimises microgeneration self-consumption
Works with solar PV or wind turbine systems
Economy tariff sense input
Dynamic load balancing
Charge and event logging
PIN code lock function
OLEV (home/work) scheme approved
Built-in RCD protection and earth fault detection - no earth rod required
Works alongside battery storage
3 year warranty
Built in Wifi and ethernet socket, for connection to the internet (no Hub required)
100A Split-core current transformer (CT for Envoy-S Metered ) £29 + VAT
£34.78 incl. VAT
100A Split-core current transformer (CT for Envoy-S Metered )
#1: CT-100-SPLIT-ROW Display - Current Sensor Clamps
Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered
Only available to purchase together with Microinverters.
Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.
Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit £743 + VAT
£891.60 incl. VAT
Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit
#1: MYEN-ZAPPI-2H22UB-PACK
#3: 4805#5055
To be OLEV Smart compliant an additional hub is required.
Zappi 22kW 3ph Data Sheet
Zappi 22kW 3ph User Manual
Zappi Declaration of Conformity
*Collections are not permitted due to health & safety regulations*
For energy harvesting wireless sensor: Myenergi Harvi
Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit
Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.
myenergi Retrofit Tamper Kit Included
Key Features
For use with 3-phase mains supply
Optimises microgeneration self-consumption
Works with solar PV or wind turbine systems
Economy tariff sense input
Dynamic load balancing
Charge and event logging
PIN code lock function
OLEV (home/work) scheme approved
Built-in RCD protection and earth fault detection - no earth rod required
Works alongside battery storage
3 year warranty
Eco-smart Single Phase EV Charge Point 7kW Untethered Black with Tamper Kit £634 + VAT
£761.28 incl. VAT
Eco-smart Single Phase EV Charge Point 7kW Untethered Black with Tamper Kit
#1: MYEN-ZAPPI-2H07UB-PACK
#3: 4850#5060
Zappi 7kW 3ph Data Sheet
Zappi 7kW 3ph User Manual
Zappi Declaration of Conformity
*Collections are not permitted due to health & safety regulations*
For energy harvesting wireless sensor: Myenergi Harvi
Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit
Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.
myenergi Retrofit Tamper Kit Included
Key Features
Optimises microgeneration self-consumption
Works with solar PV or wind turbine systems
Economy tariff sense input
Dynamic load balancing
Charge and event logging
PIN code lock function
OLEV (home/work) scheme approved
Built-in RCD protection and earth fault detection - no earth rod required
Works alongside battery storage
3 year warranty
Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White with Tamper Kit £756 +VAT
£907.20 incl. VAT
Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White with Tamper Kit
#2: MYEN-ZAPPI-2H22TW-PACK
#3: 4804#5052
New version with tamper kit for new UK regulations
Zappi Type 2 Data Sheet
Zappi Type 2 User Manual
Zappi Type 2 Declaration of Conformity
To be OLEV Smart compliant an additional hub is required.*Collections are not permitted due to health & safety regulations*
For energy harvesting wireless sensor: Myenergi Harvi
Charge your EV with your PV!
Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.
For use with 3-phase mains supply
Optimises microgeneration self-consumption
Works with solar PV or wind turbine systems
Economy tariff sense input
Dynamic load balancing
Charge and event logging
PIN code lock function
OLEV (home/work) scheme approved
Built-in RCD protection and earth fault detection - no earth rod required
Works alongside battery storage
3 year warranty
myenergi Retrofit Tamper Kit Included
EVSE test box for zappi RCD testing £262 + VAT
£314.40 incl. VAT
EVSE test box for zappi RCD testing
#1: MYEN-EVSE-TSET-BOX
#3: 2948
EVSE Test Box Datasheet
*Collections are not permitted due to health & safety regulations*
The EVSE test box can be used to test zappi EV chargers and other AC chargepoints along with a multifunction electrical tester (not supplied).Can test type 1 or type 2 connectionsSuitable for single phase and three phase zappisRCD test is carried out with test box and user's multifunction electrical tester
Myenergi eddi 2.1 - Energy Diverter (wifi enabled) £368 + VAT
£441.97 incl. VAT
Myenergi EDDI Energy Diverter.
#1A: MYEN-EDDI-16A1P02H
Eddi 2.1 Data Sheet
Eddi 2.1 Installation Manual
Eddi 2.1 User Manual
*Collections are not permitted due to health & safety regulations*
The My Energi Eddi is a remarkable and effective energy saving device. Eddi Diverts surpluses power from your solar energy system and uses it to heat your water or rooms. This helps you to save energy and minimise your utility bills. Compatible will all renewable generation technologies and easy to install. My energy are market leaders driven by continues development and sustainable solutions.
Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty
Eddi Feautures:
3.68kW / 16A max heater load
Expansion module option – 2 extra outputs with temperature control
Integral bypass switch
Graphical back-lit LCD screen for ease of use
Fan-less cooling
Built-in programmable boost timers
VariSineTM PWM technology
Supports two heaters (sequentially)
Wall mounting bracket for ease of installation
Overload and short-circuit protection
Ethernet port and built-in WiFi for connecting to the internet
Complies with CE and UKCA Requirements
Works alongside battery storage systems
Energy monitoring on the go via the myenergi app
Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White £745 +vat
£907.28 incl. VAT
Zappi Eco-smart EV Charge Point with WiFi 22kW 3PH Type 2 Tethered White#1: MYEN-ZAPPI-2H22TW
#3: 4325#4832
#4: MY-122110
Zappi Type 2 Data Sheet
Zappi Type 2 User Manual
Zappi Type 2 Declaration of Conformity
To be OLEV Smart compliant an additional hub is required.*Collections are not permitted due to health & safety regulations*
For energy harvesting wireless sensor: Myenergi Harvi
22kW Eco-smart untethered EV Charger in Black
Charge your EV with your PV!
Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.
For use with 3-phase mains supply
Optimises microgeneration self-consumption
Works with solar PV or wind turbine systems
Economy tariff sense input
Dynamic load balancing
Charge and event logging
PIN code lock function
OLEV (home/work) scheme approved
Built-in RCD protection and earth fault detection - no earth rod required
Works alongside battery storage
3 year warranty
GivEnergy 7kW EV Charger tethered 5m cable - Charge from excess PV generation £422 +VAT
£506.40 incl. VAT
Givenergy 7kW EV Charger tethered - Charge from excess PV generation#2: GIV-EVCHARGER EV Charger Tethered - 5m Cable#3: 5383
GivEnergy 7kW Brochure
GivEnergy 7kW Datasheet
GivEnergy 7kW Manual
GivEnergy 7kW Warranty
*Collections are not permitted due to health & safety regulations*
Part No: GIV-EVCHARGER EV Charging - EV Charger
The EV Charger is a new member of the GivEnergy family. Compatible with most plug-in electric cars, the EV charger is a great addition to your smart home system and GivEnergy eco-system. It's compact and waterproof design allows for installation in tight spaces both indoor and outdoor. Integrated WiFi allows for easy control of your vehicle's charge via the GivEnergy Monitoring Portal or App.Grid Power - Schedule your charing for the cheapest, cleanest off-peak energy
Renewable Power - Charge your EV for the free using excess solar, wind, or hydro generation
Battery Power - Manipulate the flow of energy from your storage battery to your EV charger
Features:
7kW / 32A AC power output rating
5m charging cable length
Plug and Play
App Controlled
Integrated PEN Protection
Solar Diversion
5m Type 2 Connector Cable
LAN(RJ-45), WiFi and 4G Connectivity
Dimensions: 288 x 260 x 112 (mm)
SolarEdge Zigbee Module for Home Energy Management (Set APP ) £57.37 + VAT
£68.84 incl. VAT
SolarEdge Zigbee Module for Home Energy Management ( Set APP )#1: SE-ZBSLV-B-S1-RW Accessories - Smart PlugsWireless Smart Energy Solution- ZigBee plug-in supports Smart Energy applications in Inverters with SetApp configuration- Functions as Smart energy network manager- ZigBee Plug-in supports up to 10 Smart Energy devices- Antenna external to inverter for wider range- ZigBee Plug-in installed within the inverter enclosure for outdoor resilience
Myenergi Current Transformer for solar/wind with 5m cable (100A 16mm) £15 +VAT
£18.00 incl. VAT
Myenergi Current Transformer with 5m cable (100A 16mm)#1: MYEN-CT100-16-05 EV Charging - Monitoring and Control#3: 2623#4: CT100-16-05 or MY-500116
Current transformer and 5m cable assembly for use with myenergi harvi, eddi and zappi.Additional clamp is required if you want to monitor realtime PV/wind generation with your eddi or zappi.
Myenergi Harvi - energy harvesting wireless sensor £46 + VAT
£54.76 incl. VAT
Myenergi Harvi - energy harvesting wireless sensor#0: RS#1: MYEN-HARVI-65A3P EV Charging - Monitoring and Control
#3: 2622
#: MY-200200
Harvi Data Sheet
Harvi Insallation Guide
Harvi User Manual
*Collections are not permitted due to health & safety regulations*
Harvi is a clever little device that enables the Zappi and Eddi products to be installed without using a directly wired current transformer CT for measuring the grid and or generation power; instead the CT is connected to Harvi. No power source is needed for Harvi - the energy from the CT is harvested and used to transmit the measurement signal to the Zappi or Eddi. This means batteries or electrical wiring are eliminated!Up to three devices can be monitored by the Harvi. You will need to buy a Zappi, Eddi or separate CT Clamp for the Harvi to work.Range 30m max indoors 100m clear line of sight. Think about positioning and avoid metal obstacles
Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White £682.57 +VAT
£819.08 incl. VAT
Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White
#1: MYEN-ZAPPI-2H07TW-G
New version with tamper kit for new UK regulations
Zappi V2 Data Sheet
Zappi V2 User Manual
Zappi V2 Declaration of Conformity
*Collections are not permitted due to health & safety regulations*
7kW Type 2 Tethered EV Charger in WhiteCharge your EV with your PV!Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.NEW Zappi G range now featuring Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warrantyClick here to view Myenergi product training webinarBuilt in Wifi and ethernet socket, for connection to the internet (no Hub required)NOTICE: For any training requirements, please contact training@myenergi.com