200w 12v / 24v complete solar battery charging kit with 20a mppt controller
200w 12v / 24v complete solar battery charging kit with 20a mppt controller £297.00
200w 12v / 24v complete solar battery charging kit with 20a mppt controller   This solar charging kit with 200W monocrystalline 12V/24V  is perfect for permanent outdoor use to provide free electricity for charging 12V/24V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).   This 200W 12V/24V solar charging kit includes:   High quality 200W monocrystalline solar panel fitted with 1m of 4.0mm solar cable and waterproof MC4 connectors 20A 12V/24V high efficiency MPPT solar charge controller with LCD display 4 corner plastic mounting brackets for bonding to the roof 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 5m of 6.0mm dual core battery cable   200W Monocrystalline solar panel:   The high efficiency waterproof 200W solar panel included in this kit features long-lasting monocrystalline solar cells and a tough, sealed, aluminium frame to provide many years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.   The panel comes with 1m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to the 5m extension cable supplied with this kit or to your existing system (MC4 connectors can also be cut off when wiring to screw terminals of the solar charge controller).   Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.    20A MPPT solar charge controller:   This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.   The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.   Multiple connectivity options: This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:   1) The controller can be connected to a remote meter with LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings   2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free APP (available for Android and iOS users).   3) An RJ45 to USB cable  can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted  (Windows-based PCs and laptops only).   Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.   In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.   The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.   Additional items: This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.   Solar panel specifications: Peak power: 200W Maximum power voltage: 38.80V Maximum power current: 5.15A Open circuit voltage: 45.00V Short circuit current: 5.80A Power tolerance: 0/+3% Dimensions: 132 x 99 x 3.5 cm Weight: 15.5 kg Mounting holes for installation 2 x 1m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Comprehensive electronic protection Self-consumption: less than 20mA Working temperature: -25C to +45C Size: 17 x 14 x 4.5 cm Weight: 1.1 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
360w 12v / 24v complete solar battery charging kit with 30a mppt controller
360w 12v / 24v complete solar battery charging kit with 30a mppt controller £388.00
360w 12v / 24v complete solar battery charging kit with 30a MPPT controller This premium quality 360W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 5 hours of bright sunlight. This 360W 12V/24V solar charging kit includes:  High quality 360W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors 30A 12V/24V high efficiency MPPT solar charge controller with an LCD display Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   360W monocrystalline solar panel:   The high efficiency, waterproof 360W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.   The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m single core extension cable supplied with the kit.   30A MPPT solar charge controller:   This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.   The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.   Multiple connectivity options:   This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:   1) The controller can be connected to a remote meter with LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings   2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free APP (available for Android and iOS users).   3) An RJ45 to USB cable  can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted  (Windows-based PCs and laptops only).   Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.   In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.   The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.   Additional items: This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.   Solar panel specifications: Peak power: 360W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
720W Solar / 2.4Kw storage 24v off grid solar battery charging kit
720W Solar / 2.4Kw storage 24v off grid solar battery charging kit £1,180.00
720w 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 730W 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   2 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   2 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2400W 24V Iconica Hybrid Inverter:   This inverter intelligently combines the functions of a 2400W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single unit:   1. 2400W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 2400W/3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to a load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of the batteries from a mains power source or generator, with full overcharge protection and multiple charging stages.   Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the batteries - either from a single or combination of input sources.   The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi kit  (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.   2 x  AGM Batteries:   The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items:   This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 2400W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1000W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 30V – 80V Maximum mains AC charging current: 25A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable  Size: 32 x 22.5 x 8.8 cm Weight: 5.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4
1.1Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit
1.1Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit £1,400.00
1.1Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.1Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   3 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   3 x 365W Solar panels:   The two high efficiency, monocrystalline 365W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 2400W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1000W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 30V – 80V Maximum mains AC charging current: 25A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable  Size: 32 x 22.5 x 8.8 cm Weight: 5.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
1.46Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit
1.46Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit £1,400.00
1.46Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.46Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   4 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   4 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
1.8Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit
1.8Kw Solar / 2.4Kw storage 12v / 24v off grid solar battery charging kit £1,520.00
1.825Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.825Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   5 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   5 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
1.46kw Solar / 4.8kw storage, 24v complete off-grid solar power system
1.46kw Solar / 4.8kw storage, 24v complete off-grid solar power system £1,682.00
1.46kw 24v complete off-grid solar power system with 4 x 365w solar panels, 3kw hybrid inverter and 4.8kw battery storage   This 1.46Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   4 x 365W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 3000W 48V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   4 x 365W Solar panels:   The two high efficiency, monocrystalline 365W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   3000W 24V Iconica Hybrid Inverter:   3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources. 2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.  Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 80A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable  Size: 44 x 30 x 11.5 cm Weight: 9 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
1.1Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit
1.1Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit £1,685.00
1.095Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.1Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.1Kw 12V/24V solar charging kit includes:   3 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
1.46Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit
1.46Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit £1,685.00
1.46Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.46Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.46Kw 12V/24V solar charging kit includes:   4 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
1.8Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit
1.8Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit £1,875.00
1.825Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.82Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.825Kw 12V/24V solar charging kit includes:   5 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS   Hybrid inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
2.19Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit
2.19Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit £1,995.00
2.19Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 2.19Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.825Kw 12V/24V solar charging kit includes:   6 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications: Peak power: 365W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Hybrid inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
2.9kw Solar / 4.8kw storage, 24v complete off-grid solar power system
2.9kw Solar / 4.8kw storage, 24v complete off-grid solar power system £2,122.00
2.92kw 24v complete off-grid solar power system with 8 x 365w solar panels, 5kw hybrid inverter and 4.8kw battery storage   This 2.92Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   8 x 365W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 5000W 48V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   8 x 365W Solar panels:   The two high efficiency, monocrystalline 365W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   5000W 24V Iconica Hybrid Inverter:   5000W 48V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. 1. 5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   2 x  AGM Batteries:   The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items:   This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 80A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable  Size: 44 x 30 x 11.5 cm Weight: 9 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
2.9Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit
2.9Kw Solar / 6Kw storage 12v / 24v off grid solar battery charging kit £2,335.00
2.92Kw 12v / 24v complete solar battery charging kit with 5000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 2.92Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.825Kw 12V/24V solar charging kit includes:   8 x High quality 365W Canadian Solar monocrystalline solar panel or similar Iconica Hybrid 5000W 48V pure sine wave inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    5000W 48V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. 1. 5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely- a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications: Peak power: 365W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Hybrid inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
3.65kw Solar / 4.8kw storage, 24v complete off-grid solar power system
3.65kw Solar / 4.8kw storage, 24v complete off-grid solar power system £2,362.00
3.65kw 24v complete off-grid solar power system with 10 x 365w solar panels, 5kw hybrid inverter and 4.8kw battery storage   This 3.65Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   10 x 365W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 5000W 48V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   10 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   5000W 24V Iconica Hybrid Inverter:   5000W 48V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. 1. 5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   2 x  AGM Batteries:   The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items:   This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 80A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable  Size: 44 x 30 x 11.5 cm Weight: 9 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS
2.9Kw Solar / 12Kw storage 48v off grid solar battery charging kit
2.9Kw Solar / 12Kw storage 48v off grid solar battery charging kit £3,258.00
2.92kw 48v complete off-grid solar power system, 3kw hybrid inverter and 12kw battery bank  UK delivery only This 2.92kW 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small, medium and large household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave, kettle, power tools, a washing machine or even a small air-conditioning unit. This may vary significantly according to the location and season. This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including twelve powerful 300W solar panels, an advanced 48V 500Ah battery bank and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   8 x Canadian Solar 365W Mono MBB Percium Half-Cell Black Frame MC4 Iconica Hybrid 3000W 24V pure sine wave inverter 12kWh 24V 500Ah battery bank - comprised of 12 x 2V AGM batteries 120A fuse or circuit breaker A pair of 10m 6mm2 solar extension cables with MC4 connectors 2m of 35mm2 tinned copper battery cables Solar isolator switch Metal plate connectors and loose ring terminals    8 x Monocrystalline 365W Solar Panels: The eight high efficiency, waterproof 365W solar panels included in the kit are amongst the largest and most powerful solar panels available on the UK and worldwide market. The panels feature thick innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. Each solar panel is also fitted with 2 x 1m of 4mm2 cable with MC4 connectors on the end. 3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.   1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.  2. Inbuilt 80A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages.   Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.   Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.  The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi connection kit or 3G connection kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.  12kWh 24V 500Ah AGM Battery Bank:  The advanced 24V 500Ah battery bank included in this kit is comprised of 12 x 2V high quality AGM batteries, complete with metal plate connectors for instant connection. This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries including a longer service life and deeper discharge capability. Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS   Additional items:   This kit also includes 2m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the battery bank, a 120A fuse or circuit breaker for use between the hybrid inverter and the battery bank, 10m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels, a solar isolator switch and metal plate connectors for connection of the battery bank. 
3.65Kw Solar / 12Kw storage 48v off grid solar battery charging kit
3.65Kw Solar / 12Kw storage 48v off grid solar battery charging kit £3,598.00
2.92kw 48v complete off-grid solar power system, 5kw hybrid inverter and 12kw battery bank  UK delivery only This 3.65kW 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small, medium and large household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave, kettle, power tools, a washing machine or even a small air-conditioning unit. This may vary significantly according to the location and season. This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including twelve powerful 300W solar panels, an advanced 48V 500Ah battery bank and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   10 x Canadian Solar 365W Mono MBB Percium Half-Cell Black Frame MC4 Iconica Hybrid 5000W 24V pure sine wave inverter 12kWh 24V 500Ah battery bank - comprised of 12 x 2V AGM batteries 120A fuse or circuit breaker A pair of 10m 6mm2 solar extension cables with MC4 connectors 2m of 35mm2 tinned copper battery cables Solar isolator switch Metal plate connectors and loose ring terminals     10 x Monocrystalline 365W Solar Panels: The eight high efficiency, waterproof 365W solar panels included in the kit are amongst the largest and most powerful solar panels available on the UK and worldwide market. The panels feature thick innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. Each solar panel is also fitted with 2 x 1m of 4mm2 cable with MC4 connectors on the end. 5000W 48V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. 1. 5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.  The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi connection kit or 3G connection kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.  12kWh 24V 500Ah AGM Battery Bank:  The advanced 24V 500Ah battery bank included in this kit is comprised of 12 x 2V high quality AGM batteries, complete with metal plate connectors for instant connection. This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries including a longer service life and deeper discharge capability. Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS   Additional items:   This kit also includes 2m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the battery bank, a 120A fuse or circuit breaker for use between the hybrid inverter and the battery bank, 10m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels, a solar isolator switch and metal plate connectors for connection of the battery bank. 
19

Next Day UK Delivery

5-7 days international delivery

Same Day System Design

Using state of the art design software

Trade Prices

Additional discounts for large volume
Visa Mastercard Maestro JCB American Express Google Pay Shop Pay