200w 12v / 24v complete solar battery charging kit with 20a mppt controller
200w 12v / 24v complete solar battery charging kit with 20a mppt controller £297.00
200w 12v / 24v complete solar battery charging kit with 20a mppt controller   This solar charging kit with 200W monocrystalline 12V/24V  is perfect for permanent outdoor use to provide free electricity for charging 12V/24V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).   This 200W 12V/24V solar charging kit includes:   High quality 200W monocrystalline solar panel fitted with 1m of 4.0mm solar cable and waterproof MC4 connectors 20A 12V/24V high efficiency MPPT solar charge controller with LCD display 4 corner plastic mounting brackets for bonding to the roof 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 5m of 6.0mm dual core battery cable   200W Monocrystalline solar panel:   The high efficiency waterproof 200W solar panel included in this kit features long-lasting monocrystalline solar cells and a tough, sealed, aluminium frame to provide many years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.   The panel comes with 1m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to the 5m extension cable supplied with this kit or to your existing system (MC4 connectors can also be cut off when wiring to screw terminals of the solar charge controller).   Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.    20A MPPT solar charge controller:   This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.   The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.   Multiple connectivity options: This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:   1) The controller can be connected to a remote meter with LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings   2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free APP (available for Android and iOS users).   3) An RJ45 to USB cable  can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted  (Windows-based PCs and laptops only).   Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.   In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.   The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.   Additional items: This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.   Solar panel specifications: Peak power: 200W Maximum power voltage: 38.80V Maximum power current: 5.15A Open circuit voltage: 45.00V Short circuit current: 5.80A Power tolerance: 0/+3% Dimensions: 132 x 99 x 3.5 cm Weight: 15.5 kg Mounting holes for installation 2 x 1m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Comprehensive electronic protection Self-consumption: less than 20mA Working temperature: -25C to +45C Size: 17 x 14 x 4.5 cm Weight: 1.1 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
360w 12v / 24v complete solar battery charging kit with 30a mppt controller
360w 12v / 24v complete solar battery charging kit with 30a mppt controller £388.00
360w 12v / 24v complete solar battery charging kit with 30a MPPT controller This premium quality 360W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 5 hours of bright sunlight. This 360W 12V/24V solar charging kit includes:  High quality 360W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors 30A 12V/24V high efficiency MPPT solar charge controller with an LCD display Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   360W monocrystalline solar panel:   The high efficiency, waterproof 360W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.   The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m single core extension cable supplied with the kit.   30A MPPT solar charge controller:   This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.   The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.   Multiple connectivity options:   This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:   1) The controller can be connected to a remote meter with LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings   2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free APP (available for Android and iOS users).   3) An RJ45 to USB cable  can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted  (Windows-based PCs and laptops only).   Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.   In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.   The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.   Additional items: This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.   Solar panel specifications: Peak power: 360W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
680w 24v complete off-grid solar power system with 2.4kw hybrid inverter and 2 x 100ah (2.4kw) batteries
680w 24v complete off-grid solar power system with 2.4kw hybrid inverter and 2 x 100ah (2.4kw) batteries £1,120.00
680w 24v complete off-grid solar power system with 2 x 340w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 680W 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   2 x 340W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   2 x 340W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2400W 24V Iconica Hybrid Inverter:   This inverter intelligently combines the functions of a 2400W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single unit:   1. 2400W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 2400W/3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to a load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of the batteries from a mains power source or generator, with full overcharge protection and multiple charging stages.   Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the batteries - either from a single or combination of input sources.   The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi kit  (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.   2 x  AGM Batteries:   The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items:   This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 2400W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1000W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 30V – 80V Maximum mains AC charging current: 25A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable  Size: 32 x 22.5 x 8.8 cm Weight: 5.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4
360w 12v / 24v solar battery charging kit, 30a mppt controller & 500AH (6kw) battery storage
360w 12v / 24v solar battery charging kit, 30a mppt controller & 500AH (6kw) battery storage £1,195.00
360w 12v / 24v complete solar battery charging kit with 30a mppt controller & 500AH battery storage   This premium quality 360W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 5 hours of bright sunlight.   This 360W 12V/24V solar charging kit includes:   High quality 360W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors 30A 12V/24V high efficiency MPPT solar charge controller with an LCD display Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   360W monocrystalline solar panel:   The high efficiency, waterproof 360W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    30A MPPT solar charge controller:   This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.   The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.   Multiple connectivity options:   This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:   1) The controller can be connected to a remote meter with LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings   2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free APP (available for Android and iOS users).   3) An RJ45 to USB cable  can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted  (Windows-based PCs and laptops only).   Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.   In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.   The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.   Additional items: This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.   Benefits of 2V battery connection: This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include: Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries. Suitable applications: The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to: - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations Benefits of AGM batteries: This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include: - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration. Solar panel specifications: Peak power: 360W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
360w 12v / 24v solar battery charging kit, 1000W 12V hybrid inverter charger & 500AH (6kw) battery storage
360w 12v / 24v solar battery charging kit, 1000W 12V hybrid inverter charger & 500AH (6kw) battery storage £1,325.00
360w 12v / 24v complete solar battery charging kit with 1000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 360W 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 360W 12V/24V solar charging kit includes:   High quality 360W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors 30A 12V/24V high efficiency MPPT solar charge controller with an LCD display Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   360W monocrystalline solar panel:   The high efficiency, waterproof 360W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    1000W 12V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 1000W pure sine wave inverter, 50A solar charge controller and a 20A smart battery charger in one single unit:   1. 1000W 12V Pure sine wave inverter: Converts DC current from the solar panel into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 1000VA of continuous power with a strong peak power handling capability of up to 2000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   2. Inbuilt 50A PWM solar charge controller: Regulates the input from the solar panel to the batteries, with a full range of safety functions; including protection against overcharge, overheating, reverse current etc. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance, prolongs the life of the batteries and can often recover some lost battery capacity. Performance data for the solar panel is displayed on the LCD screen.   3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of the batteries from a mains power source or generator, with full overcharge protection and multiple charging stages.   Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panel, mains power/ a generator and the batteries - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications: Peak power: 360W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 195 x 99 x 4 cm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors   Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg
700W Off Grid Complete 12V Solar  PV Kit & 400Ah (4.8kw) batteries
700W Off Grid Complete 12V Solar PV Kit & 400Ah (4.8kw) batteries £2,195.00
700W Off Grid Complete 12V Solar PV Kit   Delivery cost – calculated at checkout UK delivery time – 1-2 days subject to availability, 13.00 cut off EU delivery time – approximately 5-7 business days   This 700W solar charging kit is the complete solution for anyone choosing to get away from mains power, and living the off-grid dream. Perfect for office conversions, sheds, garages, beach huts, or liveaboard boats, this kit is capable of powering small electrical appliances all year round (such as LED lights; phones/tablets/laptops charging; electrical fridge).     This complete kit contains:     2 x 350W All-Black Split-Cell Monocrystalline Solar Panel - exceptional low-light performance using anti-reflective nanotechnology     1 x Victron Energy EasySolar 1600VA 12V Inverter/Charger - with all-in-one in-built MPPT, sine wave inverter, and battery charger     2 x Victron Energy AGM Deep-Cycle Telecom 12V 200Ah batteries     Pair of 5m solar cables with MC4 connectors + Spare pair of MC4 connectors     2 x Parallel battery cables; and 2 x Pair of battery terminal covers     2 x Large Metal Z Feet - 100mm Mounting Feel for Larger Panels (set of four)     This small off-grid household 12V solution combines 700W solar power; an all-in-one AC output inverter and MPPT controller for maximum charging efficiency to the 1.44 kWh battery bank. Minimal cabling and very simple to connect together.
4.76kw 24v complete off-grid solar power system with 3kw hybrid inverter and 4.8kw
4.76kw 24v complete off-grid solar power system with 3kw hybrid inverter and 4.8kw £2,582.00
4.76kw 24v complete off-grid solar power system with 14 x 340w solar panels, 3kw hybrid inverter and 4.8kw battery storage   This 4.76 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   14 x 340W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 3000W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   14 x 340W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   3000W 24V Iconica Hybrid Inverter:   This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single unit:   1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000W/4000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to a load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of the batteries from a mains power source or generator, with full overcharge protection and multiple charging stages.   Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the batteries - either from a single or combination of input sources.   The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi kit  (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.   2 x  AGM Batteries:   The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items:   This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 80A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable  Size: 44 x 30 x 11.5 cm Weight: 9 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4
1.36kw 24v complete off-grid solar power system and 6 x 100ah (7.2kw) batteries
1.36kw 24v complete off-grid solar power system and 6 x 100ah (7.2kw) batteries £2,698.00
1.36kw 24v complete off-grid solar power system and 6 x 100ah batteries   This 1.36kW 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small and medium household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave or a kettle, with occasional use of high power appliances such as tools or a washing machine (cold wash). This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including four 100% German-made solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes: 4 x 340W solar panels each with 0.9m solar cable and MC4 connectors Iconica Hybrid 3000W 24V pure sine wave inverter 6 x 100Ah AGM deep cycle Photonic Universe leisure batteries 120A fuse or circuit breaker A pair of 5m 6mm2 solar extension cables with MC4 connectors 1m of 35mm2 tinned copper battery cables Battery linking cable Loose ring terminals   4 x 340W Solar panels:   The four high efficiency, waterproof 340W solar panels included in the kit are manufactured in Germany to the highest European quality and performance standards. The panels feature thick 4.0mm tempered solar glass, which makes them a lot stronger and more durable than other standard solar panels. Each solar panel is also fitted with 2 x 0.9m of 4mm2 cable with MC4 connectors on the end. These can be used for easy connection to the solar extension cable included with the kit.   3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit:   1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the batteries from a mains power source or generator, with full overcharge protection and multiple charging stages.   Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the batteries - either from a single or combination of input sources.  The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.   6 x AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate.   Additional items: This kit also includes 1m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 0.9m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.    Solar panel specifications (subject to availability) JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4   Hybrid inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Battery specifications (per battery): Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm Weight: 30.0 kg 
2.7kw 24v complete off-grid solar power system, 3kw hybrid inverter and 12kw battery bank
2.7kw 24v complete off-grid solar power system, 3kw hybrid inverter and 12kw battery bank £3,478.00
2.7kw 48v complete off-grid solar power system, 3kw hybrid inverter and 12kw battery bank  UK delivery only This 2.7kW 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small, medium and large household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave, kettle, power tools, a washing machine or even a small air-conditioning unit. This may vary significantly according to the location and season. This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including twelve powerful 300W solar panels, an advanced 48V 500Ah battery bank and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   8 x JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Iconica Hybrid 3000W 24V pure sine wave inverter 12kWh 24V 500Ah battery bank - comprised of 12 x 2V AGM batteries 120A fuse or circuit breaker A pair of 10m 6mm2 solar extension cables with MC4 connectors 2m of 35mm2 tinned copper battery cables Solar isolator switch Metal plate connectors and loose ring terminals    8 x Monocrystalline 340W Solar Panels: The eight high efficiency, waterproof 340W solar panels included in the kit are amongst the largest and most powerful solar panels available on the UK and worldwide market. The panels feature thick innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. Each solar panel is also fitted with 2 x 1m of 4mm2 cable with MC4 connectors on the end. 3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.   1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.  2. Inbuilt 80A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages.   Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.   Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.  The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi connection kit or 3G connection kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.  12kWh 24V 500Ah AGM Battery Bank:  The advanced 24V 500Ah battery bank included in this kit is comprised of 12 x 2V high quality AGM batteries, complete with metal plate connectors for instant connection. This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries including a longer service life and deeper discharge capability. Solar panel specifications (subject to availability) JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4   Additional items:   This kit also includes 2m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the battery bank, a 120A fuse or circuit breaker for use between the hybrid inverter and the battery bank, 10m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels, a solar isolator switch and metal plate connectors for connection of the battery bank. 
2.7kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank
2.7kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank £4,678.00
2.7kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank Delivery usually 1-2 business days This 2.7kW 48V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small, medium and large household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave, kettle, power tools, a washing machine or even a small air-conditioning unit. This may vary significantly according to the location and season. This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including twelve powerful 340W solar panels, an advanced 48V 500Ah battery bank and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit. Kit includes:   8 x JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4  Iconica Hybrid 5000W 48V pure sine wave inverter 24kWh 48V 500Ah battery bank - comprised of 24 x 2V AGM batteries 120A fuse or circuit breaker A pair of 10m 6mm2 solar extension cables with MC4 connectors 2m of 35mm2 tinned copper battery cables Solar isolator switch T-branch MC4 connectors Metal plate connectors and loose ring terminals 8 x Monocrystalline 340W Solar Panels: The eight high efficiency, waterproof 340W solar panels included in the kit are amongst the largest and most powerful solar panels available on the UK and worldwide market. The panels feature thick innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. Each solar panel is also fitted with 2 x 1m of 4mm2 cable with MC4 connectors on the end. 5000W 48V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.   5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages.   Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources. The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi connection kit or 3G connection kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more. 24kWh 48V 500Ah AGM Battery Bank: The advanced 48V 500Ah battery bank included in this kit is comprised of 24 x 2V high quality AGM batteries, complete with metal plate connectors for instant connection. This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries including a longer service life and deeper discharge capability. Solar panel specifications (subject to availability) JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4   Additional items: This kit also includes 2m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the battery bank, a 120A fuse or circuit breaker for use between the hybrid inverter and the battery bank, 10m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels, a pair of T-branch MC4 connectors for connecting the solar panels (see wiring diagram), a solar isolator switch and metal plate connectors for connection of the battery bank.
4.08kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank
4.08kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank £5,078.00
4.08kw 48v complete off-grid solar power system, 5kw hybrid inverter and 24kw battery bank   Delivery usually 1-2 business days   This 4.08kW 48V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small, medium and large household or office appliances such as a fridge, TV, radio, lights, computer, hoover, microwave, kettle, power tools, a washing machine or even a small air-conditioning unit. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including twelve powerful 340W solar panels, an advanced 48V 500Ah battery bank and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   12 x JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4  Iconica Hybrid 5000W 48V pure sine wave inverter 24kWh 48V 500Ah battery bank - comprised of 24 x 2V AGM batteries 120A fuse or circuit breaker A pair of 10m 6mm2 solar extension cables with MC4 connectors 2m of 35mm2 tinned copper battery cables Solar isolator switch T-branch MC4 connectors Metal plate connectors and loose ring terminals     12 x Monocrystalline 340W Solar Panels:   The twelve high efficiency, waterproof 340W solar panels included in the kit are amongst the largest and most powerful solar panels available on the UK and worldwide market. The panels feature thick innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. Each solar panel is also fitted with 2 x 1m of 4mm2 cable with MC4 connectors on the end.   5000W 48V Iconica Hybrid Inverter:   This inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A 500V MPPT solar charge controller and a 60A smart battery charger in one single unit. This innovative inverter features inbuilt Bluetooth, along with the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.   5000W 48V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.   Inbuilt 80A 500V MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.   Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages.   Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.   Additional features: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, and can also be connected to a Wi-Fi connection kit or 3G connection kit (purchased separately) to unlock access to  SMS / email status updates for the inverter, remote system monitoring from any location and much more.   24kWh 48V 500Ah AGM Battery Bank:   The advanced 48V 500Ah battery bank included in this kit is comprised of 24 x 2V high quality AGM batteries, complete with metal plate connectors for instant connection. This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries including a longer service life and deeper discharge capability.   Solar panel specifications (subject to availability) JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4 Part No: JAM60S-10-340-MR-BF-MC4 Panels - Monocrystalline Rating: 340W Efficiency: 20.2% Width: 996mm Height: 1,689mm Weight: 19 kg Rated Power: 340 W VMPP: 34.73 V IMPP: 9.79 A Voc: 41.55 V Temp. Coefficient (Mpp): -0.354 % Clamp position on panel: Long and short side Connector Type: MC4   Additional items:   This kit also includes 2m positive and negative 35mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the battery bank, a 120A fuse or circuit breaker for use between the hybrid inverter and the battery bank, 10m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels, a pair of T-branch MC4 connectors for connecting the solar panels (see wiring diagram), a solar isolator switch and metal plate connectors for connection of the battery bank.
2Kw Off Grid Complete 12V Solar  PV Kit & 7.2Kw lithium batteries
2Kw Off Grid Complete 12V Solar PV Kit & 7.2Kw lithium batteries £6,195.00
2Kw Off Grid Complete 12V Solar  PV Kit & 7.2Kw lithium batteries   Delivery cost – calculated at checkout UK delivery time – 1-2 days subject to availability, 13.00 cut off EU delivery time – approximately 5-7 business days   This 2kW solar charging kit is the complete solution for anyone choosing to get away from mains power, and living the off-grid dream. Perfect for office conversions, sheds, garages, beach huts, or live-aboard boats, this kit is capable of powering most domestic electrical appliances year round (lighting, TV, PC, kitchen appliances, fridges).   Victron SmartSolar charge controller and Multiplus inverter/charger are some of the best products on the market and come with a 5 year warranty.   These excellent Lithium Iron-Phosphate batteries from Pylon Tech has the advantages of an internal Battery Management System and high reliability, high life-cycle and high temperature performance, as well as being environmentally friendly. 10 year warranty standard.   Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using the free-to-use Victron Remote Management Portal (VRM).   This complete kit contains:     6 x 325W Monocrystalline Solar Panels - exceptional low-light performance using anti-reflective nanotechnology and enhanced shunt resistance     1 x Victron SmartSolar 150V 35A MPPT Controller - with in-built bluetooth technology     3 x 2.4kWh Pylon US2000 Lithium Battery - relying on the cutting-edge technology for streamlined energy storage and now 90% DoD (inc. Pylon Long DC Cable Pack, and two sets of stackable brackets)     1 x Victron Multiplus 3kVA 48V Inverter Charger - two AC outputs     1 x Victron Color Control GX Panel - offers at-a-glance live information, and lets you control all products connected to it (including Wifi Nano USB, Wall Mount Enclosure and Power Leads)     1 x Durite 300A Rotary Battery Switch     2 x AC Isolator - Kraus Naimer 40A 3-pole; 1 x Kraus and Naimer DC Isolator - KG20-4 4pole 2 string     Battery Cabling for Multiplus and SmartSolar Regulator, Misc cables - including Comm CANbus cables, VE.Direct cable, RJ45 cable   This fully off-grid household solution combines 1950W solar power, a seprarate SmartSolar MPPT controller for the solar panels to charge and connect with maximum charging efficiency to the 7kWh Lithium battery bank that is a breeze to install. The Victron Multiplus Inverter Charger also has the capabilities to provide a continuous output power of 2400W and has two AC outputs. With the Color Control GX providing intuitive control and monitoring for all the products and shows you the state of charge of your lithium batteries, solar charge and AC output all on one screen! With appropriate isolators, string fuses and battery switches, this full off-grid solar kit is the complete package.
4Kw Off Grid Complete 12V Solar  PV Kit & 9.6Kw lithium batteries
4Kw Off Grid Complete 12V Solar PV Kit & 9.6Kw lithium batteries £10,730.00
4Kw Off Grid Complete 12V Solar  PV Kit & 9.6Kw lithium batteries   Delivery cost – calculated at checkout UK delivery time – 1-2 days subject to availability, 13.00 cut off EU delivery time – approximately 5-7 business days     This 4kW solar charging kit is the complete solution for anyone choosing to get away from mains power, and living the off-grid dream. Perfect for office conversions, sheds, garages, beach huts, or live-aboard boats, this kit is capable of powering most domestic electrical appliances year round (lighting, TV, PC, kitchen appliances, fridges).   With an integrated Victron Energy EasySolar solution, one simple box is all you need. It includes a state of the art MPPT charge controller for controlling solar panel output; and an internal Multiplus inverter/charger to allow DC input from a generator and also crucial AC output power distribution. This is a simple solution and one of the best products on the market, coming with a 5 year warranty.   The lithium batteries from Pylon Tech has the advantages of high reliability, high life-cycle and high temperature performance, as well as being environmentally friendly. 10 year warranty standard.   Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using the free-to-use Victron Remote Management Portal (VRM).   This complete kit contains:     12 x 345W Monocrystalline Split-Cell Solar Panels - exceptional low-light performance using anti-reflective nanotechnology and enhanced shunt resistance     1 x 5kVA 48V Victron EasySolar Inverter/Charger with MPPT solar regulator - an all-in-one unit combining solar input, DC input (from generator if needed), battery DC output, and AC power distribution. Comes with the Victron CCGX color control for live information and total control     4 x Pylon 2.4kWh US2000 Li-Ion 48V Battery - relying on the cutting-edge Iron-Phosphate battery for streamlined energy storage and now 90% DoD (with stackable brackets and Long DC Cable pack)     1 x USB-MK3 Programming Interface, 1 x RJ45 Cable, 1 x CANbus Comm Cable     1 x Multibloc NH00 2-Pole with 2 x 160A fuses and shrouds     2 x DC Isolators - with 20A string fuses; 2 x AC Isolators; and Durite 300A Rotary Switch     1 x 50m reel of 4mm2 cable with MC4 Connectors     2 x Pair of T-branch MC4 Connectors - for connecting in parallel; 4 x MC4 connector pairs     12 x Channel mounts for solar panels (with self-tapping screws and clamps)     This fully off-grid household 48V solution combines 4140W solar power; a combined Victron EasySolar all-in-one unit that utilises MPPT controller technology for the solar panels to charge and connect with maximum charging efficiency to the 9.6kWh Pylon lithium battery bank that installs easily in a beautiful cabinet; plus a reliable 5kVA (4000W continuous) pure sine wave inverter/charger for AC power output and for charging batteries from an available AC grid/shore/generator connection (recommended for winter when solar yields are lower).
13

Next Day UK Delivery

5-7 days international delivery

Same Day System Design

Using state of the art design software

Trade Prices

Additional discounts for large volume
Visa Mastercard Maestro JCB American Express Google Pay Shop Pay