All products
Aiko
Air Source Heat Pumps
Air Source Heat Pumps Packages
All Black Solar Panlels
Alpha Battery Storage Range
Battery Storage
Best Selling Products
BiFacial Solar Panels
Bisol Solar panels
Build a PV kit
Bulk Deals
Canadian Solar
Commercial Battery Storage Systems
Design & Installations
Electric Boilers
Electric Car Chargers
Energy Saving & Accessory Products
Enphase IQ All in One
Enphase Micro Inverters
Eurener Solar Panels
Flexible & semi-flexible solar panels
Fox ESS Low Voltage
Fox ESS Solar Inverters
FOX HIGH VOLTAGE
Full Range of Solar Inverters
GivEnergy Battery Storage
Givenergy EV Car Charger
Growatt 6.5KWH Battery
Growatt AC-Coupled Inverter
Growatt Battery Storage
Growatt GBLI6532
Growatt Inverter 5KW Battery
Growatt Monitoring System
Growatt Solar Inverters
GSL Energy All In One
Hot Water All In One ASHP
Huawei Battery Storage
Huawei Optimisers
Hybrid Inverters / Battery Chargers
Hyundai Solar Panels
ICS
Infrared heating
Installed packages
JA Solar Panels
Jinko Solar Panel
LG Chem
Libbi All In One Home Battery Storage
Longi Solar Panels
Lower delivery cost available specifically for solar panels on this page from 1-4 panels
Most Popular
Mounting Options
Newest Products
Pylontech Battery
QCells Solar Panels
REC Solar panels
SMA Solar Inverters
SoFar Solar Inverters
Solar & Battery Storage Kits
Solar Accessories
Solar Panel Full Range
Solar Thermal
SolarEdge
SolarEdge Battery Storage
SolarEdge Optimisers
SolarEdge Optimizers / Enphase Micro-inverters International
SolarEdge Smart Solar Panel
Solax Battery Storage Range
Solax Inverters
Solis Solar Inverters
Special Offers
Sunpower Solar Panels
Sunsynk On & Off grid battery Storage
Swimming Pool ASHP
Tigo Optimisers
Trina Solar panels
Victron Complete Kits
Victron Energy Range
Viridian In-Roof Integrated Panels
Warranties
2 x 500ml Endotherm Energy Saving Additive - Typical 10-15% savings £120 +vat
£144.00 incl. VAT
2 x 500ml Endotherm Energy Saving & Carbon Emission Reducing Additive Typical 10-15% savings
#10: ENDOTHERMX2
Endotherm Brochure
Endotherm Installation Manual
Changing the properties of water to improve energy efficiency.
EndoTherm is a unique, multi-award winning energy saving hydronic additive independently proven to save up to 15% on space heating energy consumption.
How much Endotherm should be used:
2 x 500ml bottles are sufficient for a medium to large 3-4 bed detached property. For more accurate sizing Endotherm should equate to 1% of total system volume.
When should Endotherm be added:
The ideal time to minimise installation costs will be when the heating system is being serviced. However, if the system won't be serviced before the winter time then it could be better to start enjoying the savings straight away.
Water is used in heating systems as it is a good heat transfer medium that is abundant and low-cost. EndoTherm optimises water to influence heating system performance.
Although water is abundant and low cost, its thermophysical properties can be improved upon.EndoTherm interacts with water’s hydrogen bond network to improve its thermophysical properties to maximise the ability of heating systems to deliver heat to the locations required at the times it is needed.These changes can increase the rates at which rooms reach temperature and improve the ability of the heating system to respond to changes in demand.This allows heating systems to better deliver heat to the right places, and at the right times to maximise system efficiency.
Independently Proven
EndoTherm has been rigorously tested with savings confirmed by multiple third party Research & Development laboratories and facilities.
Easy to Install
EndoTherm requires no system downtime and can be installed, like an inhibitor, in just 10-15 minutes.
Non - Corrosive
EndoTherm is non-corrosive to heating system components in use and is non-hazardous with no discharge requirements.
Award Winning & Recognised
EndoTherm is a multi-award winning technology with confirmed compatibility with leading boiler and inhibitor brands.
Carbon Emission Reduction
As EndoTherm reduces heating energy consumption, greenhouse gas emissions are also reduced which is vital to achieve net zero targets.
100% Organic
EndoTherm is made from 100% organic materials and is responsible for 0.58Kg embodied carbon which is offset in under a day of use.
EndoTherm is installed at 1% of total system volume using the same methodology as traditional corrosion inhibitors. Or 2 x 500ml bottles for a typical 3-4 bedroom home. These guidelines are based on steel flat panel radiators More EndoTherm may be required if higher water volume heat emitters like traditional cast iron radiators.Research has shown that EndoTherm remains stable and is able to sustain at a functional concentration within a closed heating system circuit for 10+ years provided no significant fluid loss (and subsequent refilling causing EndoTherm dilution) has occurred due to leaks or maintenance.
Solar Panel Bird Deterrent Exclusion Kit – 30m Galvanised Steel with Black PVC & clips £120 +VAT
£144.00 incl. VAT
Bird Deterrent 30m Solar Panel Bird Exclusion Kit (Galvanized Mesh)
#1: WM134-PVC
Solar panel exclusion kits keep pigeons and other pest birds out from under solar panels on pitched roofs
Everything you need to treat 30m around of solar panels
Kit includes wire mesh, specialist solar panel retaining clips and cutting tool
100% effective when properly installed, better than using spikes, chicken mesh or repellent gels
Does not pierce roof or solar panel, no leaks no warranty issues with panels
Fast and easy to install, no gluing or drilling necessary.
For this kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame.
Kit Contents:
1 x Solar Panel Weldmesh Roll in Galvanised Steel
60 x Solar Panel Mesh Clips
1 x Standard Wire Cutters
20 x Corner Zip Ties
Solar Panel Galvanised Steel Weldmesh Spec:
Manufactured from: 16 gauge / 1.60 mm diameter European Grade A Hot Dipped Galvanised wire.
Mesh Size: 25mm X 25mm (1" X 1")
Roll Width: 200mm (0.66')
Roll Length: 30m (100')
30m Solar Panel Bird Deterrent Mesh - Galvanised Steel and Black PVC Coated £45 +VAT
£54.00 incl. VAT
30m Solar Panel Bird Deterrent Mesh - Galvanised Steel and Black PVC Coated
#1: WM170-TRADE
Galvanised steel mesh, coated with black PVC
Prevents birds from nesting underneath solar panels
Use in conjunction with our solar panel mesh clips (WM132) to secure the mesh to the return lip on the underside of the solar panels
Solar Mesh Clips Single Use Pack of 60 for 30m of mesh £48 +VAT
£57.60 incl. VAT
Solar Mesh Clips Single Use Pack of 60 for 30m of mesh
#1: WM173-60-TRADE
Simple clip on system designed specifically to keep birds out from under solar arrays
These clips are a permanent fixing, once discs have been pushed onto the rod they cannot be removed
Clips recommended every 450mm (18 inches) 2 clips on short edge 3 clips on long edge.
Solar clips bind the mesh to the panels without drilling holes or damaging the system.
Designed to fit our Solar Panel Mesh (WM133 & WM139). Nearly invisible from the ground
Fast easy & highly effective, making solar panel bird exclusion straight forward
Mesh Sold Separately
Solar Mesh Clips with Nut Re-usable Pack of 60 for 30m of mesh £74 +vat
£88.80 incl. VAT
Solar Mesh Clips with Nut Pack of 60 for 30m of mesh
#1: WM172-60-TRADE
Simple clip on system designed specifically to keep birds out from under solar arrays
Unlike other solar clips the nut is designed to be removable allowing for maintenance of the solar panels
Clips recommended every 450mm (18 inches) 2 clips on short edge 3 clips on long edge.
Solar clips bind the mesh to the panels without drilling holes or damaging the system.
Designed to fit our Solar Panel Mesh (WM133 & WM139). Nearly invisible from the ground
Fast easy & highly effective, making solar panel bird exclusion straight forward
Mesh Sold Separately
Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm £68.00 +VAT
£81.60 incl. VAT
Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#2: REN-520075-K#3: 2089
Renusol Brochure
Renusol Datasheet
Minimum order - 5
Renusol Console+ bucket - minimum order of 5 units unless ordered together with solar panels
Available for delivery only
Renusol Console+ 5200 75 KThe ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8
Concrete Ballast Block 17kgs £2.55 +VAT
£3.06 incl. VAT
Concrete Ballast Block 17kgs
#2: BALLAST-17KG Mounting - Flat Roof
Ballast Data Sheet
Ballast Block - Install Guide
Only available to purchase together with solar panels or mounting
The Enviroblock® is a Solid Dense 7.3N Concrete Block. It is manufactured from secondary and recycled materials and comes in a natural grey finish. Durable and non-penetrable, it can be used with all ballasted mounting solutions for domestic, industrial and commercial flat roof installations to maximise harvesting of solar power.
Specs:
Height: 215 mmLength: 440 mmWidth: 100 mmWeight approx. 17 kgs
Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover £40 + VAT
£48.58 incl. VAT
Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover
#2: EM-ECA2-BI Meters - Single Phase BiDirectional#3: 2814
Emlite 1ph Datasheet
Emlite 1ph Installer Notes
Emlite 1ph Warranty
Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values. NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’ document released by OFGEM.
Emlite 1-ph generation meter 100A (1000 pulse/kWh) £32 +VAT
£38.40 incl. VAT
Emlite 1-ph generation meter 100A (1000 pulse/kWh)#2: EM-ECA2 Meters - Single Phase Generation Meters#3: 2501
Emlite 1ph Installer Notes
Emlite 1ph Certification
Emlite 1ph Warranty
Emlite Single Phase Total Generation Meter 100A with Pulse Output
The ECA2 single phase meter is one of the worlds most compact metering units
The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable Part Code: ECA2.v
Does not come with CT's.
Emlite 3-ph Bi-directional generation meter EMP.az, 100A (1000 pulse/kWh) £99 +VAT
£118.80 incl. VAT
Emlite 3-ph Bi-directional generation meter EMP.az, 100A (1000 pulse/kWh) #1: EMP1-AZ
Emlite 3-ph Data Sheet
Emlite 3ph User Manual
Emlite 3-ph Certification
Part of the Emlite three phase metering range which offers superb meters for a wide range of applications where basic metering is needed. They are of high quality and sturdy construction with features normally found in more expensive meters.
Product Features
Accuracy Class A and B
4 quadrant energy measurement
Optional power quality information
Configurable pulsed outputs
Clear and easy to read LCD display
Solid Brass terminals
Optional finger guard for main terminals
MC4 Basic Crimping pliers 2.5/4/6mm2 £104 + VAT
£125.35 incl. VAT
MC4 Basic Crimping pliers 2.5/4/6mm2
#1:MC4-CRIMP-TOOL
Crimping pliers for private use PV-CZM-BS Suitable for the assembly of products approved by TƒœV in small amounts.
Simple crimping tool without locator and without spare parts (not possible to replace the inserts)
Crimp cycles : 30'000 cycles guaranteed
Complete tool for the assembly of the original MC4. part code 32.6025 PV-CZM-BS
PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY.
MC4 Connector Twin Pack ( Kit 1 ) 0014/0015 £5 + VAT
£5.57 incl. VAT
MC4 Connector Twin Pack ( Kit 1 ) 0014/0015
#1: MC4-CONN14-2-PACK
A pack of 2x Male and 2x Female cable couplers (including insulating part)
Snap-in lock
Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool
Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector
Tried and tested plug connectors, 14 years of experience in the field
Suitable for assembly with cross-sections of 4 and 6 mm²
Rated current: 39 A (for 4 and 6mm2 cable)
Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min) Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6,0mm Please use correct MC4 approved tools to crimp these connectors on to bare cables. Supplier code: 32.0014P0001-UR and 32.0015P0001-URKeywords: MC4CONN2PACK, Multi Contact, PV Cable
MC4 Pre terminated cable 2m (1 Pack) £6 + VAT
£6.80 incl. VAT
MC4 Pre terminated cable 2m (1 Pack)
#1:MC4-2M-1 Cables - Pre Terminated Cables
Minimum order - 5 units or available to order together with other items
Weight: 0.13 kgLength: 2 mArea: 4 mm2Colour: BlackCores: 1 - NMax Current: 44
MC4 Pre terminated cable 5m (1 Pack) £12 + VAT
£14.41 incl. VAT
MC4 Pre terminated cable 2m (1 Pack)
#1:MC4-5M-1 Cables - Pre Terminated Cables
Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44
4mm2 single-core DC solar cable 25m - Black £18 + VAT
£22.06 incl. VAT
4mm2 single-core DC solar cable 25m - Black
#1: CABLE4-1-25 Cables - DC Cables
4 mm², single-core, black, 25m NEW H1Z2Z2-K certified
50m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
6mm2 single-core DC solar cable 50m - Black £52 +VAT
£62.40 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-50 Cables - DC Cables
APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. -Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216.