Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- White Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- White Ecosmart £738.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White EcosmartPart Number: MYEN-ZAPPI-222TW MID: V2 Zappi 22kW Three Phase Untethered EV ChargerUK delivery only: next day delivery, 13.30 cut off *Collections are not permitted due to health & safety regulations*For wireless monitoring and updates: Myenergi - HUB : Myenergy Hub https://www.itstechnologies.shop/collections/zappi-ev-charge-point/products/myenergi-hub-myenergy-hub-for-wireless-monitoring-updates For energy harvesting wireless sensor: Myenergi Harvi - https://www.itstechnologies.shop/collections/zappi-ev-charge-point/products/myenergi-harvi-energy-harvesting-wireless-sensor ZAPPI-227TB -22kW Tethered WhiteZappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-Phase Key Features3 charging modes (Fast, Eco and Eco+)OLEV approvedOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputProgrammable timer functionCharge and event loggingPin-code lock functionTap operated display backlightBuilt-in RCD protectionIntegral cable holsterRemote control and monitoring add-on optionSupplied with clip-on grid current sensorTechnical DataRated Power: 7kW (1-ph) or 22kW (3-ph)Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)Supply Frequency: 50 HzRated Current: 32A maxStandby Power Consumption: 3WEarth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring optionsGrid Current Sensor: 100A max. primary current, 16mm max. cable diameterSupply Cable Entry: Rear, bottom or sideEnclosure Dimensions: 439 x 282 x 122mmProtection Degree: IP65 (weatherproof)Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006Operating Temperature: -25°C to +40°CCircuit Breaker: 40A curve B (2-pole 1-ph)Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- Black Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- Black Ecosmart £738.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black EcosmartPart Number: MYEN-ZAPPI-222TB UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring and updates, please go to Myenergi - HUB : Myenergy Hub For energy harvesting wireless sensor, please go to Myenergi Harvi APPI-227TB - 22kW Tethered BlackZappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor Technical Data- Rated Power: 7kW (1-ph) or 22kW (3-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
SolarEdge 3.68kw 1ph HD-Wave Inverter NO DISPLAY with EV charging SolarEdge 3680W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 3680W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 3680W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies
SolarEdge 3.68kw 1ph HD-Wave Inverter NO DISPLAY with EV charging £1,008.00
 SolarEdge 3.68kw 1ph HD-Wave Inverter NO DISPLAY with EV charging   UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* Part No: SE-3680H-EV Inverters - Main Units Rating: 3,680W Phases: 1   SE3680H-RW000NNV2 SolarEdge’s EV charging single phase inverter enables homeowners to charge their electric vehicles directly from the power of the sun, maximizing solar usage and further reducing electricity bills. This charger/inverter also enables charging up to 2.5 times faster than a standard EV charger through an innovative solar boost mode that uses grid and PV charging simultaneously. In addition to the reduced hassle of installing a standalone EV charger and a PV inverter separately, homeowners can track their charging status, control vehicle charging, and set charging schedules using the fully integrated SolarEdge monitoring platform. Optimized installation with HD-Wave inverter technology and integrated EV charger Specifically designed to work with power optimizers Record-breaking efficiency Fixed voltage inverter for longer strings Extremely small and easy to install outdoors or indoors High reliability without any electrolytic capacitors Integrated Mode 3 EV charger with solar boost mode charging (grid & PV) EV charger cable and holder ordered separately for flexible cable length selection Built-in module-level monitoring   Please note EV charging from PV is only possible when at least 1.5kW is available from solar.   Please note the SE EV inverter is capable of pulling up to 32A from the grid when EV charging, please size your AC circuit accordingly! Alternatively if that’s not possible, please set the Circuit Breaker Rating DIP Switch on SE EV inverter to match the AC cable/MCB rating in the property.   SolarEdge Energy Meter and CT are required to charge from excess PV.  EV charging cables sold separately.  EV inverters are currently not compatible with DC StorEdge systems. Firmware update will be required and it is not currently available.
SolarEdge 4kw with Electric Vehicle charging 1ph HD-Wave Inverter NO DISPLAY SolarEdge 4000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 4000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 4000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies
SolarEdge 4kw with Electric Vehicle charging 1ph HD-Wave Inverter NO DISPLAY £1,045.00
SolarEdge 4kw with Electric Vehicle charging 1ph HD-Wave Inverter   UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* Part No: SE-4000H-EV Inverters - Main Units Rating: 4,000W Phases: 1 SE4000H-RW000NNV2 SolarEdge’s EV charging single phase inverter enables homeowners to charge their electric vehicles directly from the power of the sun, maximizing solar usage and further reducing electricity bills. This charger/inverter also enables charging up to 2.5 times faster than a standard EV charger through an innovative solar boost mode that uses grid and PV charging simultaneously. In addition to the reduced hassle of installing a standalone EV charger and a PV inverter separately, homeowners can track their charging status, control vehicle charging, and set charging schedules using the fully integrated SolarEdge monitoring platform. Optimized installation with HD-Wave inverter technology and integrated EV charger   Specifically designed to work with power optimizers Record-breaking efficiency Fixed voltage inverter for longer strings Extremely small and easy to install outdoors or indoors High reliability without any electrolytic capacitors Integrated Mode 3 EV charger with solar boost mode charging (grid & PV) EV charger cable and holder ordered separately for flexible cable length selection Built-in module-level monitoring Please note EV charging from PV is only possible when at least 1.5kW is available from solar. Please note the SE EV inverter is capable of pulling up to 32A from the grid when EV charging, please size your AC circuit accordingly! Alternatively if that’s not possible, please set the Circuit Breaker Rating DIP Switch on SE EV inverter to match the AC cable/MCB rating in the property. SolarEdge Energy Meter and CT are required to charge from excess PV.  EV charging cables sold separately.  EV inverters are currently not compatible with DC StorEdge systems. Firmware update will be required and it is not currently available.
SolarEdge 6kw with Electric Vehicle charging 1ph HD-Wave Inverter SolarEdge 6000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 6000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies SolarEdge 6000W 1ph HD-Wave Inverter NO DISPLAY with EV charging - I.T.S Technologies
SolarEdge 6kw with Electric Vehicle charging 1ph HD-Wave Inverter £1,232.00
SolarEdge 6kw with Electric Vehicle charging 1ph HD-Wave Inverter     UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* Part No: SE-6000H-EV Inverters - Main Units Rating: 6,000W Phases: 1   SE6000H-RW000NNV2 SolarEdge’s EV charging single phase inverter enables homeowners to charge their electric vehicles directly from the power of the sun, maximizing solar usage and further reducing electricity bills. This charger/inverter also enables charging up to 2.5 times faster than a standard EV charger through an innovative solar boost mode that uses grid and PV charging simultaneously. In addition to the reduced hassle of installing a standalone EV charger and a PV inverter separately, homeowners can track their charging status, control vehicle charging, and set charging schedules using the fully integrated SolarEdge monitoring platform. Optimized installation with HD-Wave inverter technology and integrated EV charger Specifically designed to work with power optimizers Record-breaking efficiency Fixed voltage inverter for longer strings Extremely small and easy to install outdoors or indoors High reliability without any electrolytic capacitors Integrated Mode 3 EV charger with solar boost mode charging (grid & PV) EV charger cable and holder ordered separately for flexible cable length selection Built-in module-level monitoring Please note EV charging from PV is only possible when at least 1.5kW is available from solar. Please note the SE EV inverter is capable of pulling up to 32A from the grid when EV charging, please size your AC circuit accordingly! Alternatively if that’s not possible, please set the Circuit Breaker Rating DIP Switch on SE EV inverter to match the AC cable/MCB rating in the property. SolarEdge Energy Meter and CT are required to charge from excess PV.  EV charging cables sold separately.  EV inverters are currently not compatible with DC StorEdge systems. Firmware update will be required and it is not currently available.
21

Next Day UK Delivery

5-7 days international delivery

Same Day System Design

Using state of the art design software

Trade Prices

Additional discounts for large volume
Visa Mastercard Maestro JCB American Express Google Pay Shop Pay