Zappi V2 EV car charge point V2 - 7kW Type 2 Untethered (no cable) - White Ecosmart £572+vat

Zappi EV car charge point V2 - 7kW Type 2 Untethered - White Ecosmart
#1: MYEN-ZAPPI-207UW

UK delivery only:  next day delivery, 13.30 cut off 

*Collections are not permitted due to health & safety regulations*

The new V2 model is BS 7671 18th Edition ready and comes with integrated RCD and Earth fault detection. This eliminates the need to install an expensive Type B RCD or an earth electrode. 

For wireless monitoring & updates, please go to Myenergi - HUB : Myenergy Hub

For energy harvesting wireless sensor, please go to Myenergi Harvi

ZAPPI-207TB - 7kW Untethered White
Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-Phase

Key Features
- 3 charging modes (Fast, Eco and Eco+)
- OLEV approved
- Optimises microgeneration self-consumption
- Works with solar PV or wind turbine systems
- Economy tariff sense input
- Programmable timer function
- Charge and event logging
- Pin-code lock function
- Tap operated display backlight
- Built-in RCD protection
- Integral cable holster
- Remote control and monitoring add-on option
- Supplied with clip-on grid current sensor

Technical Data
- Rated Power: 7kW (1-ph)
- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)
- Supply Frequency: 50 Hz
- Rated Current: 32A max
- Standby Power Consumption: 3W
- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)
- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)
- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter
- Supply Cable Entry: Rear, bottom or side
- Enclosure Dimensions: 439 x 282 x 122mm
- Protection Degree: IP65 (weatherproof)
- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006
- Operating Temperature: -25°C to +40°C
- Circuit Breaker: 40A curve B (2-pole 1-ph)
- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)
- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < - 100 Ω for some vehicles