Energy Saving & Accessory Products (5)

SOLiC200 Solar Immersion Heater Controller#1: SOLiC200 Accessories - Immersion Controllers#2: SOLiC 200 Solar Immersion Controller  Solic200 Controller Data Sheet  Solic200 Controller User Manual   *Collections are not permitted due to health & safety regulations* The Award Winning SOLiC 200 from Earthwise Products Ltd automatically converts energy generated by existing PV panels into hot water by diverting excess solar power to the immersion heater before it’s exported to the national grid. Simple to use and maintenance free, the SOLiC 200 is self-contained, easy to install and can save the homeowner hundreds of pounds over the course of a year. The SOLiC 200 includes a 10 year return to base guarantee (*) see below, has been built to last 25 years, and has been designed, constructed and fully tested in Britain to the highest CE standards.The unit can be installed quickly and easily without the need for plumbing alterations using the installation manual which is downloadable below. Please note: this installation manual is for trade use and installers only. The SOLiC 200 has a zero export threshold and checks for excess power 20 times a second, ensuring maximum efficiency.Why buy the award-winning SOLiC 200 ?- Free hot water for your customers- Large potential market- Easy upsell on orders- Increase average order value- Revisit existing customers- 1000's installed in the UK and across Europe- Easy to install - typically under one hour- Add value to your product portfolio- UK–based technical support from manufacturer- Proactive sales support (*) Please note to activate the 10 year warranty installer must fill in and send off the Warranty Card included in the box with the unit. This needs to be done within 28 days from the purchase, without this the unit will not be covered.

Myenergi EDDI Energy Diverter.  #1A: MYEN-EDDI-16A1P02H   Eddi 2.1 Data Sheet  Eddi 2.1 Installation Manual  Eddi 2.1 User Manual *Collections are not permitted due to health & safety regulations* The My Energi Eddi is a remarkable and effective energy saving device. Eddi Diverts surpluses power from your solar energy system and uses it to heat your water or rooms. This helps you to save energy and minimise your utility bills. Compatible will all renewable generation technologies and easy to install. My energy are market leaders driven by continues development and sustainable solutions. Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty Eddi Feautures: 3.68kW / 16A max heater load Expansion module option – 2 extra outputs with temperature control Integral bypass switch Graphical back-lit LCD screen for ease of use Fan-less cooling Built-in programmable boost timers VariSineTM PWM technology Supports two heaters (sequentially) Wall mounting bracket for ease of installation Overload and short-circuit protection Ethernet port and built-in WiFi for connecting to the internet Complies with CE and UKCA Requirements Works alongside battery storage systems Energy monitoring on the go via the myenergi app

Marlec iBoost+ Buddy Monitoring Device #2: Buddy Monitor (for iBoost Plus Immersion Controller)  iBoost Buddy Manual Marlec Solar iBoost+Marlec’s innovative Solar iBoost+ diverts the surplus solar photovoltaic energy generated at your home to heat the water in the household tank and save you money.Fitting the iBoost means you can:- Cut the cost of water heating in your home.- Reduce the use of your boiler- Maximise the use of the free solar energy generated at your property.Solar iBoost+ uses only the energy that would otherwise be exported. Its increased efficiency and extra functions deliver even more savings and when coupled with iBoost Buddy you can conveniently monitor and control Solar iBoost + within the home.With over 45,000 Solar iBoost products successfully working in UK homes installers recommend it!Key Features- Solar iBoost+ fits quickly and neatly next to your water cylinder wired simply between a fused spur and the immersion. No need to change your standard immersion heater up to 3kW.- It responds rapidly to the varying home consumption and changing weather ensuring that only excess power is used.- Solar iBoost+ features connections for 2 immersions, switching between them automatically to maximise electric water heating systems.- Wireless Sender eliminates unsightly and costly wiring.- Solar iBoost+ displays real time information “Heating by Solar 1.6kW” and historical energy saving figures are seen at the push of a button. View this and more data using the optional iBoost+Buddy home display.- LED’s also give an instant visual indication of the system in operation.- Simple programmable timer enables Solar iBoost+ to work in harmony with your existing water heating system on a 5/2 day basis. Even separate winter and summer settings can be programmed and switched between at the push of a button.- Selectable languages; French, German, Italian, Portuguese & Spanish.- Built-in Boost override switch keeps you in control so you can top up your hot water in 15 minute increments up to 2 hours.- Solar iBoost+ is ready to connect wirelessly to the Buddy if added at installation or a later date.- CE compliance to all product and safety standards conducted by independent test laboratories.- 2 year warranty. Dimensions: 288x255x100mm 1.95kg How does it affect your Feed in Tariff Payments?It doesn’t! In the UK FIT generation payments are not affected. As most export tariff contracts are based on deemed energy usage rather than actually metered self consumption is most beneficial. Solar iBoost+ enables you to usefully and automatically consume any excess energy generated rather than export it. Even with an export meter the benefits of Solar iBoost+ can still easily outweigh rising energy costs.Please Note: This product should be installed by a qualified electrician.Technical Specification- Accessory Type Heating Control- Country of Manufacture - Dimensions (mm) 256 x 157 x 91- SKU iBoost+- Weight (kgs) 1.55

Solar iBoost Plus Immersion Controller#2: Solar iBoost Plus Immersion Controller  Solar iBoost Installation Guide  Solar iBoost User Manual  Solar iBoost Accreditations *Collections are not permitted due to health & safety regulations* Marlec Solar iBoost+Marlec’s innovative Solar iBoost+ diverts the surplus solar photovoltaic energy generated at your home to heat the water in the household tank and save you money.Fitting the iBoost means you can:- Cut the cost of water heating in your home.- Reduce the use of your boiler- Maximise the use of the free solar energy generated at your property. Solar iBoost+ uses only the energy that would otherwise be exported. Its increased efficiency and extra functions deliver even more savings and when coupled with iBoost Buddy you can conveniently monitor and control Solar iBoost + within the home.With over 45,000 Solar iBoost products successfully working in UK homes installers recommend it!Key Features- Solar iBoost+ fits quickly and neatly next to your water cylinder wired simply between a fused spur and the immersion. No need to change your standard immersion heater up to 3kW.- It responds rapidly to the varying home consumption and changing weather ensuring that only excess power is used.- Solar iBoost+ features connections for 2 immersions, switching between them automatically to maximise electric water heating systems.- Wireless Sender eliminates unsightly and costly wiring.- Solar iBoost+ displays real time information “Heating by Solar 1.6kW” and historical energy saving figures are seen at the push of a button. View this and more data using the optional iBoost+Buddy home display.- LED’s also give an instant visual indication of the system in operation.- Simple programmable timer enables Solar iBoost+ to work in harmony with your existing water heating system on a 5/2 day basis. Even separate winter and summer settings can be programmed and switched between at the push of a button.- Selectable languages; French, German, Italian, Portuguese & Spanish.- Built-in Boost override switch keeps you in control so you can top up your hot water in 15 minute increments up to 2 hours.- Solar iBoost+ is ready to connect wirelessly to the Buddy if added at installation or a later date.- CE compliance to all product and safety standards conducted by independent test laboratories.- 2 year warranty. Dimensions: 288x255x100mm 1.95kg How does it affect your Feed in Tariff Payments?It doesn’t! In the UK FIT generation payments are not affected. As most export tariff contracts are based on deemed energy usage rather than actually metered self consumption is most beneficial. Solar iBoost+ enables you to usefully and automatically consume any excess energy generated rather than export it. Even with an export meter the benefits of Solar iBoost+ can still easily outweigh rising energy costs.Please Note: This product should be installed by a qualified electrician.Technical Specification- Accessory Type Heating Control- Country of Manufacture - Dimensions (mm) 256 x 157 x 91- SKU iBoost+- Weight (kgs) 1.55