Sunsynk - Installed Packages (5)

Deposit payment to proceed with an installed system  To proceed with an installed please use this deposit for us to proceed with your DNO application where applicable and coordinate an installation date. The deposit payment goes towards the cost of the installed package and is fully refundable up until the time the system has been dispatched for delivery. Following deposit payment please provide: Details of the system you would like Photo's of your fuse board and space for the battery system and the distance between the two Your MPAN number found on your electricity bill The balance payment will be due prior to the system being dispatched for delivery at least 3-4 days before the date of installation.  

Nationwide installations are available across most areas of the UK.  £750 deposit to proceed with the installation process available here Installation service includes DNO application & fully insured installation service. #1:SUNSYNK-INSTALLED-3.6-10.24KWH    Sunsynk 3.6Kw Data Sheet  Sunsynk 3.6Kw Installation Manual  Sunsynk 3.6Kw Warranty  Sunsynk 3.6Kw G99 Certificate   Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled   Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes   GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.    Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH   Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  Accessories included: Comms cable -  GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack -  GSL-PWRCAB-2M-ORG  2m black & red battery cables - 2 x BATCAB35-1M-PAIR 35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8 Battery isolator - GIV-BAT-ISO-100A

Nationwide installations are available across most areas of the UK.  £750 deposit to proceed with the installation process available here Installation service includes DNO application & fully insured installation service.   #1:SUNSYNK-INSTALLED-5-10.24KWH  Sunsynk 5Kw Data Sheet  Sunsynk 5Kw Installation Manual  Sunsynk 5Kw Warranty  Sunsynk 5Kw G99 Certificate    Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled   Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes   GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.    Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH   Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  Accessories included: Comms cable -  GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack -  GSL-PWRCAB-2M-ORG  2m black & red battery cables - 2 x BATCAB35-1M-PAIR 35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8 Battery isolator - Projoy Battery Isolator 160V 125A DC  PEBS-L-160V-125A-2P-DC

Nationwide installations are available across most areas of the UK.  £750 deposit to proceed with the installation process available here Installation service includes DNO application & fully insured installation service. #1: SUNSYNK-INSTALLED-5-10.24KWH  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  Accessories included: Comms cable -  GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack -  GSL-PWRCAB-2M-ORG  2m black & red battery cables - 2 x BATCAB35-1M-PAIR 35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8 Battery isolator - GIV-BAT-ISO-100A

Nationwide installations are available across most areas of the UK.    £750 deposit to proceed with the installation process available here   Installation service includes DNO application & fully insured installation service.   #5: INSTALLED-SUN-LIFE3.6X- Storage Systems - Hybrid Inverter  Sunsynk Lifelynk Data Sheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Collections are not permitted due to health & safety regulations Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation. This inverter enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system. This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too. Product Features: Small and Mighty - An ideal solution for smaller properties, social housing and local government projects Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit EPS Function - Includes option for 3.6kw Output for Essential Loads Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket Plug and Play - Get up and running quickly Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind Technical Specifications: Maximum Power Output - 3600w Dimensions - 700.6 x 534.6 x 182.2mm Weight - 57.4kg Weight 57.4 kg Dimensions 54.36 × 18.22 × 70.06 cm Brand Sunsynk Rated Power 3600W DC Start-up Voltage 150V Weight 57.4kg Warranty 5 Years Max. Charging/Discharging Current 60A Charge, 80A Discharge Battery Capacity 3.84kWh   Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.