Myenergi Current Transformer for solar/wind with 5m cable (100A 16mm)
Myenergi Current Transformer for solar/wind with 5m cable (100A 16mm) £15.87
Myenergi Current Transformer with 5m cable (100A 16mm)#1: MYEN-CT100-16-05 EV Charging - Monitoring and Control#2: Myenergi 100A 5m CT clamp#4: CT100-16-05 Current transformer and 5m cable assembly for use with myenergi harvi, eddi and zappi.Additional clamp is required if you want to monitor realtime PV/wind generation with your eddi or zappi.
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered (with cable)- Black Ecosmart Zappi EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart - I.T.S Technologies
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered (with cable)- Black Ecosmart £592.00
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart#0: RS#1: MYEN-ZAPPI-207TB UK delivery only:  next day delivery, 13.00 cut off  *Collections are not permitted due to health & safety regulations* For Myenergi - HUB : Myenergy Hub (for wireless monitoring & updates) click here. For Myenergi Harvi - energy harvesting wireless sensor click here.  Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, Zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-Phase Key Features- 3 charging modes (Fast, Eco and Eco+) -Type 2 tethered cable (6.5m)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor   Set timers At certain hours ‘time of use energy tariffs’ are significantly cheaper. With zappi, you can use the ‘boost timer’ option to start charging at times with the lowest rates. It’s a cost-saving charging alarm clock for your EV!   No earth rod zappi is the only EV charger with built-in PEN fault technology. It’s the safest choice for an electric car charger, eliminating the need to install additional earth rods means no extra costs & an easy install. Why are Earth Rods Important   PV charging zappi works in harmony with your Solar PV or wind generation, meaning you can charge your car using green energy for free. If you haven’t got a renewable energy source at home, zappi works just like any other charger in ‘fast mode’.   Remote access The myenergi app & hub allow you to access your devices from anywhere in the world! Visual graphs allow you to monitor your import/export information all in one place.   Pincode protected A 5 digit pin code is a security feature integrated into this smart electric car charging point, should you wish to use it. It prevents people from changing your settings or using your solar EV charger without permission or tampering. Technical Data- Rated Power: 7kW (1-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered (with cable) - White Ecosmart Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered (with cable) - White Ecosmart £584.00
Zappi smart EV car charge point V2 - 7kW Type 2 Tethered White Ecosmart#0: RS#1: MYEN-ZAPPI-207TW - 7kW Tethered White UK delivery only:  next day delivery, 13.00 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates: Myenergi - HUB: Myenergy Hub For energy harvesting wireless sensor: Myenergi Harvi Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+)- OLEV approved -Type 2 tethered cable (6.5m)- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor Set timers At certain hours ‘time of use energy tariffs’ are significantly cheaper. With zappi, you can use the ‘boost timer’ option to start charging at times with the lowest rates. It’s a cost-saving charging alarm clock for your EV!   No earth rod zappi is the only EV charger with built-in PEN fault technology. It’s the safest choice for an electric car charger, eliminating the need to install additional earth rods means no extra costs & an easy install. Why are Earth Rods Important   PV charging zappi works in harmony with your Solar PV or wind generation, meaning you can charge your car using green energy for free. If you haven’t got a renewable energy source at home, zappi works just like any other charger in ‘fast mode’.   Remote access The myenergi app & hub allow you to access your devices from anywhere in the world! Visual graphs allow you to monitor your import/export information all in one place.   Pincode protected A 5 digit pin code is a security feature integrated into this smart electric car charging point, should you wish to use it. It prevents people from changing your settings or using your solar EV charger without permission or tampering. Technical Data- Rated Power: 7kW (1-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006Operating Temperature: -25°C to +40°CCircuit Breaker: 40A curve B (2-pole 1-ph)Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- Black Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- Black Ecosmart £722.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart#0: RS#1: MYEN-ZAPPI-222TB#2: V2 Zappi 22kW Three Phase Tethered EV Charger UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring and updates, please go to Myenergi - HUB : Myenergy Hub For energy harvesting wireless sensor, please go to Myenergi Harvi APPI-227TB - 22kW Tethered BlackZappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+) - Type 2 tethered cable (6.5m)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor Technical Data- Rated Power: 7kW (1-ph) or 22kW (3-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- White Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered (with cable)- White Ecosmart £722.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart#0: RS#1: MYEN-ZAPPI-222TW#2: V2 Zappi 22kW Three Phase Untethered EV ChargerUK delivery only: next day delivery, 13.30 cut off *Collections are not permitted due to health & safety regulations*For wireless monitoring and updates: Myenergi - HUB : Myenergy Hub For energy harvesting wireless sensor: Myenergi Harvi ZAPPI-227TB -22kW Tethered White Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features 3 charging modes (Fast, Eco and Eco+) Type 2 tethered cable (6.5m) OLEV approved Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Programmable timer function Charge and event logging Pin-code lock function Tap operated display backlight Built-in RCD protection Integral cable holster Remote control and monitoring add-on option Supplied with clip-on grid current sensor Technical Data Rated Power: 7kW (1-ph) or 22kW (3-ph) Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%) Supply Frequency: 50 Hz Rated Current: 32A max Standby Power Consumption: 3W Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955) Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated) Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter Supply Cable Entry: Rear, bottom or side Enclosure Dimensions: 439 x 282 x 122mm Protection Degree: IP65 (weatherproof) Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006 Operating Temperature: -25°C to +40°C Circuit Breaker: 40A curve B (2-pole 1-ph) Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii) Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
Myenergi - HUB : Myenergy Hub (for wireless monitoring & updates)
Myenergi - HUB : Myenergy Hub (for wireless monitoring & updates) £88.00
Myenergi - HUB : Myenergy Hub#0: RS#1: MYEN-HUB#2: Myenergi Hub UK delivery only:  next day delivery, 11.30 cut off  *Collections are not permitted due to health & safety regulations* MyEnergi HUB for Eddi and Zappi The MyEnergi Hub adds wireless monitoring to your Zappi and Eddi system. Through the app you can seamlessly track the use of your surplus energy to power your car or heating. The Hub also checks for and downloads the latest software updates from MyEnergi, meaning that your system will be as up-to-date as possible and you can take full advantage of any new features. With the Hub you can introduce the MyEnergi app allowing control of monitoring on your mobile device. Change your Zappo charging modes, pre-set your heating and hot water for your Eddi and observe domestic live energy flow.Key Features- Remotely control and monitor your MyEnergi devices- Access to the latest firmware updates- Devise status LEDs- Will support time of use tariffs in the near future- Required for zappi OLEV approval
Myenergi Harvi - energy harvesting wireless sensor Myenergi Harvi - energy harvesting wireless sensor Myenergi Harvi - energy harvesting wireless sensor Myenergi Harvi - energy harvesting wireless sensor
Myenergi Harvi - energy harvesting wireless sensor £60.00
Myenergi Harvi - energy harvesting wireless sensor#0: RS#1: MYEN-HARVI-65A3P EV Charging - Monitoring and Control #2: Harvi Wireless CT Sensor (excludes CT clamp) UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* Harvi is a clever little device that enables the Zappi and Eddi products to be installed without using a directly wired current transformer CT for measuring the grid and or generation power; instead the CT is connected to Harvi. No power source is needed for Harvi - the energy from the CT is harvested and used to transmit the measurement signal to the Zappi or Eddi. This means batteries or electrical wiring are eliminated!Up to three devices can be monitored by the Harvi. You will need to buy a Zappi, Eddi or separate CT Clamp for the Harvi to work.Range 30m max indoors 100m clear line of sight. Think about positioning and avoid metal obstacles
Zappi Electric Car charge point V2 - 7kW  - Type 2 Untethered (no cable) - Black Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies
Zappi Electric Car charge point V2 - 7kW - Type 2 Untethered (no cable) - Black Ecosmart £592.00
Zappi E;ectric Car charge point V2 - 7kW - Type 2 Untethered - Black Ecosmart#1: MYEN-ZAPPI-207UB EV Charging - EV Charger UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates, please go to Myenergi - HUB : Myenergy Hub For energy harvesting wireless sensor, please go to Myenergi Harvi 7kW untethered EV Charger in BlackCharge your EV with your PV! Zappi has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger.- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Dynamic load balancing- Charge and event logging- PIN code lock function- OLEV (home/work) scheme approved - HUB required- Built-in RCD protection and earth fault detection - no earth rod required- Works alongside battery storage- 3 year warranty
Zappi EV car charge point V2 - 7kW Type 2 Untethered (no cable) - White Ecosmart Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV car charge point V2 - 7kW Type 2 Tethered - White Ecosmart - I.T.S Technologies
Zappi EV car charge point V2 - 7kW Type 2 Untethered (no cable) - White Ecosmart £592.00
Zappi EV car charge point V2 - 7kW Type 2 Untethered - White Ecosmart#1: MYEN-ZAPPI-207UW UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates, please go to Myenergi - HUB : Myenergy Hub For energy harvesting wireless sensor, please go to Myenergi Harvi ZAPPI-207TB - 7kW Untethered WhiteZappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensorTechnical Data- Rated Power: 7kW (1-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < - 100 Ω for some vehicles
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered (no cable) - Black Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - Black Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered (no cable) - Black Ecosmart £687.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered - Black Ecosmart#1: MYEN-ZAPPI-222UB EV Charging - EV Charger UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates, please go to: MyEnergi - HUB For energy harvesting wireless sensor, please go to: MyEnergi Harvi22kW untethered EV Charger in BlackCharge your EV with your PV!Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy integrated with grid power. In fast mode Zappi operates like any other mains powered EV charger. - For use with 3-phase mains supply- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Dynamic load balancing- Charge and event logging- PIN code lock function- OLEV (home/work) scheme approved - HUB required- Built-in RCD protection and earth fault detection - no earth rod required- Works alongside battery storage- 3 year warranty
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered (no cable) - White Ecosmart Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered (no cable) - White Ecosmart £687.00
Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Untethered - White Ecosmart#1: MYEN-ZAPPI-222UW#2: V2 Zappi 22kW Three Phase Untethered UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates: Myenergi - HUB : Myenergy Hub For energy harvesting and sensor: Myenergi Harvi  Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor Technical Data- Rated Power: 7kW (1-ph) or 22kW (3-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote -monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: White RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles
13

Next Day UK Delivery

5-7 days international delivery

Same Day System Design

Using state of the art design software

Trade Prices

Additional discounts for large volume
Visa Mastercard Maestro JCB American Express Google Pay Shop Pay