Solar PV kit design/quote service - £50+vat £60.00 incl. VAT
Solar PV kit design/quote service #1: DESIGN-SERVICE   We provide a design/quote service to consumers that are serious about their project. For guide prices customers can use products available on our website.    If you are serious about moving forward with your project and would like to save money on the supply by buying direct then we require the £50+vat service to be purchased which will go towards the cost of your system cost should you proceed with an order.   Design quote service includes collating the information for your project to understand the requirements and providing a bespoke, itemised quote  with expected generation from the pv system. Design can include solar and battery storage.   As an additional service we can also recommend a reputable nationwide installation company to help with your project.  
1 ph Solar accessories kit £169 +vat £202.80 incl. VAT
1ph Solar accessories kit#1: Solar-accessories-kit Exact kit contents compiled according to requirements with the rest of the kit ordered: 2 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) 2 x MC4-CONN14-2-PACK MC4 Connector Twin Pack ( Kit 1 )1 x CABLE4-1-50 4mm2 single-core DC cable 50m - Black 1 x PEAS69-EL25R-3 Projoy AC Isolator 1 x IMO-SI16-PEL64R-4 Enclosed DC Switch IP66 4 pole 2 string 16A 800V 1 x SDM120DB SDM120DB-MID Single-Phase DIN Rail Mounted Digital Meter 1 x BOHAZARD-SET PV on Roof and Hazard Labels Pack  
3ph Solar accessories kit £256 +vat £307.20 incl. VAT
3ph Solar accessories kit#1: Solar-accessories-kit-3ph Exact kit contents compiled according to requirements with the rest of the kit ordered: 4 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) 2 x MC4-CONN14-2-PACK MC4 Connector Twin Pack ( Kit 1 )1 x CABLE4-1-100 4mm2 single-core DC cable 100m - Black 1 x K&N Three Phase AC Switch Disconnector  1 x IMO-SI16-PEL64R-4 Enclosed DC Switch IP66 4 pole 2 string 16A 800V 1 x Iskra MT174 3 Phase 4 wire 120A 3ph meter 1 x BOHAZARD-SET PV on Roof and Hazard Labels Pack  
Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm £74 +vat £88.80 incl. VAT
Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#1: REN-520075-K#2: ***COMPLETE KIT WITH FIXINGS*** Renusol Console+ 5200 75 K  Renusol Brochure Renusol Datasheet Minimum order - 5 Renusol Console+ bucket - minimum order of 4 units unless order together with any other products Available for delivery only Renusol Console+ 5200 75 K The ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8
Portrait mounting for pitched roof £48+vat/panel £57.60 incl. VAT
Portrait mounting for pitched roof - cost per panel#1: portrait-mounting-pitch-roof Minimum order - 5, must be purchased together with solar panels Please note: Price is for a standard portrait layout. A non-standard layout will need to be quoted and may incur additional costs.   Mounting kit includes: rails, mid clamps, end clamps, roof hooks, rail connectors & end caps   Layout and roof type must be provided following order for the correct design  & supply   Available options: Esdec, Renusol & Clenergy  
landscape mounting for pitched roof £59+vat/panel £70.80 incl. VAT
Landscape mounting for pitched roof - cost per panel#1: landscape-mounting-pitch-roof Renusol Datasheet Minimum order - 5, must be purchased together with solar panels Please note: Price is for a standard landscape layout. A non-standard layout will need to be quoted and may incur additional costs. Mounting kit includes: rails, mid clamps, end clamps, roof hooks, rail connectors & end caps Layout and roof type must be provided following order for the correct design  & supply Available options: Esdec, Renusol & Clenergy  
Portrait mounting for slate roof £65.75+vat/panel £78.90 incl. VAT
Renusol Portrait mounting for slate roof - cost per panel#1: portrait-mounting-slate-roof Minimum order - 5, must be purchased together with solar panels   Please note: Price is for a standard portrait layout. A non-standard layout will need to be quoted and may incur additional costs.   Mounting kit includes: rails, mid clamps, end clamps, roof hooks, rail connectors,  end caps & Genius flashing kit   Layout must be provided following order for the correct design  & supply    
Landscape mounting for slate roof £65.75+vat/panel £78.90 incl. VAT
Renusol Landscape mounting for slate roof - cost per panel#1: landscape-mounting-slate-roof Minimum order - 5, must be purchased together with solar panels Please note: Price is for a standard landscape layout. A non-standard layout will need to be quoted and may incur additional costs. Mounting kit includes: rails, mid clamps, end clamps, roof hooks, rail connectors,  end caps & Genius flashing kit   Layout must be provided following order for the correct design  & supply    
GSE In roof Mounting System Portrait £98+vat/panel £117.60 incl. VAT
GSE In roof Mounting System Portrait - cost per panel#1: GSE-PORTRAIT-KIT  GSE Datasheet  GSE Manual  GSE Warranty Minimum order - 5, must be purchased together with solar panels  Please note: Price is for a standard portrait layout. A non-standard layout will need to be quoted and may incur additional costs.   An integrated photovoltaic panel system"developed by installers for installers"   Compatible with 95% of the framed modules on the market Certified conception and design to allow watertightness, optimized ventilation and fire restistance Easy and quick to install 100% French manufacturing   Compatible panels: JA Solar:  up to 420w Bisol: up to 365w Canadian Solar: up to 430w Hyundai: up to 395w Jinko: up to 445w Longi: up to 410w QCells: up to 410w REC: up to 375w SolarEdge: up to 370w   Kit includes: Mid Clamp BLACK H16 GSE Clamp Wedges Twin Pack ( 2x Left / 2x Right ) GSE Flashing Hook GSE Joint EDPM Pre Drilled Self-Tapping Screw + GSE Washer (Pack of 100) Pre-compressed seal roll (5.5m)Lateral Flashing - UNIVERSAL - 1290MM – BLACK NEW DPO GSE Rooflex Flexible Sealing Strip 330mm x 5mGSE Portrait Frame Certified and guaranteed for 10 years Designed and manufactured in France, the GSE IN-ROOF SYSTEM is certified by various European bodies.Reliable and resistant, it has been designed to offer the same resistance and longevity as normal roof coverings like tiles, slates or zinc :• Resistance to fire• Completely waterproof: ensures complete watertightness of the PV system and the roof• Optimal ventilation• Impact resistance• Very important mechanical resistance, compatible with all snow and wind zones   In 2022, the GSE IN-ROOF SYSTEM has evolved… In order to keep up with the requirements of the market and to adress the new expectations of more power per roof. The new GSE IN-ROOF SYSTEM, with it two half frames, allows the integration of larger, wider and more powerfull modules.  
Adjustable Portrait or landscape frames for ground mount & flat roof £78/panel +vat £93.60 incl. VAT
Adjustable Portrait or landscape frames for ground mount & flat roof- cost per panel#8: ING-TPF-Kit  Portrait Installation of Triangular Adjustable Mountings  Drawings for Triangle Position Minimum order - 4 Mounting kit includes all required components for the mounting - for use with ballast or other means to secure the frame to the surface.  A clever aluminum and stainless steel structure. The triangle's back pilar is adjusted to create different angle inclinations. Maximize the use of space and improve the performance of solar panels.   INCLINATION ANGLE 10 TO 35 DEGREES The adjustable triangles offer two major advantages to all solar photovoltaic systems when the panels are installed on flat surfaces.MAXIMISE THE USABLE AREA AND INSTALL MORE PANELS. Installing multiple rows of solar arrays will cast shadows on each other if the space and angle are not calculated correctly. With adjustable triangles, the panels will be adjusted on-site to avoid the shadowing effect and at the same time, the space will be used smartly to install even more panels. OPTIMISE THE PERFORMANCE OF THE PANELS AT DIFFERENT SEASONS OF THE YEARThe earthing is moving and every season the distance and angle of sun rays vary. Based on your actual coordination it is possible to change the angle of your panels 3-4 times every year to capture the sun at the right angle. This simple adjustable will yield an additional 20% of more energy. HOW TO MOUNT THE TRIANGLES.A foundation is not required to install the triangles on the ground. Solid concrete blocks are adequate to support the aluminum frames. Strong wall plugs and screws are required to secure the aluminium frames on the concrete blocs. COMPATIBLE SIZE OF SOLAR PANELS.The structure works for all panels from very small 200W to the largest 600W panels with a height over 2.2meters.  
GSE Portrait Ground £114+vat /panel £136.80 incl. VAT
GSE Portrait Ground - cost per panel #1: GSE-GROUND-MOUNT  GSE Datasheet  GSE Manual Minimum order - 4 must be purchased together with solar panels  The GSE Ground mount system is a ballasted system, for portrait PV Modules. This system is adjustable between 7 and 40 degrees and required and box frame for every 2 portrait panels. This system has been paired with the Fastensol 3300mm H profile Rail F-R3300-H to maximise both value and simplicity.This ground mount system is quick to install, cost effective and compatible with 95% of PV modules on the market.    Upon ordering we require the layout of the panels for the correct supply of components. Please the frames fit 2 panels each, however this listing costs the components per panel for simplicity and requires ordering 1 unit per solar panel to be installed. Mounting kit includes all required components for the mounting only and does not include ballasts:   Fastensol 3300mm H profle Rail Fastensol Rail Bolt M10GSE Ground Mount Box Base - BottomGSE Ground Mount Box Base - Front/Back GSE Ground Mount Box Base - Side GSE Ground Mount Box Base - Bottom Bracket GSE Ground Mount Box Base - Top Bracket GSE Ground Mount L corner FixedGSE Ground Mount L corner Adjustable GSE Ground Mount M6 Screw & Washer GSE Ground Mount M6 Nut GSE Ground Mount M10 Nut GSE Ground Mount M10 Screw and WasherFastensol H Rail Splice Fastensol Black End Clamp (30mm) Fastensol Black Mid Clamp (30mm)    
Renusol Trisole for ground mount or flat roof £138+vat/panel £165.60 incl. VAT
Renusol Trisole for ground mount or flat roof - cost per panel#1: trisole-mounting-flat-roof Renusol Datasheet Minimum order - 5, must be purchased together with solar panels    Mounting kit includes all required components for the mounting - for use with ballast. Hanger bolts available by request for additional cost  Landscape layout only Layout must be provided following order for the correct design Renusol mounting system  
North south Schletter flat roof mounting £72+vat/panel £86.40 incl. VAT
Noth south flat roof mounting - cost per panel#1: landscape-mounting-pitch-roof   North south Schletter Datasheet North south Schletter Installation Guide North south Schletter Warranty North south Schletter Conformity   Minimum order - 6, must be purchased together with solar panels   Please note: Price is for a standard layout. A non-standard layout will need to be quoted and may incur additional costs. price does not include wind breaker.   Mounting kit includes all required components for the mounting. Ballasts need to be sourced elsewhere Layout must be provided following order for the correct design  
Portrait Renuol Metasol mounting for box profile £29 +vat/panel £34.80 incl. VAT
Portrait Renuol Metasol mounting for box profile - cost per panel#1: Metasol-mounting-box-profile  Renusol Datasheet  Renusol Manual Minimum order - 5, must be purchased together with solar panels   Please note: Price is for a standard portrait layout. A non-standard layout will need to be quoted and may incur additional costs.     Mounting kit includes all required components for the mounting.    Layout and roof type must be provided following order for the correct design  & supply Renusol mounting system  
Landscape Renuol Metasol mounting for box profile £27.25/panel £32.70 incl. VAT
Landscape Renuol Metasol mounting for box profile - cost per panel#1: Metasol-mounting-box-profile-Landscape  Renusol Datasheet  Renusol Manual Minimum order - 5, must be purchased together with solar panels Please note: Price is for a standard landscape layout. A non-standard layout will need to be quoted and may incur additional costs. Mounting kit includes all required components for the mounting.    Layout and roof type must be provided following order for the correct design  & supply Renusol mounting system  
1 review Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) £54 +vat £64.80 incl. VAT
Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh)#1: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters  Emlite 1ph Installer Notes  Emlite 1ph Certification  Emlite 1ph Warranty Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts

Visa Mastercard Maestro JCB Google Pay Shop Pay