2 reviews Sunsynk ECCO 3.6Kw On & Off grid Hybrid solar & wind Inverter £1,032 +vat £1,238.40 incl. VAT
Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #1:SUN-3.6-ECCO   Storage Systems - Hybrid Inverter   Sunsynk 3.6Kw Data Sheet  Sunsynk 3.6Kw Installation Manual  Sunsynk 3.6Kw Warranty  Sunsynk 3.6Kw G99 Certificate   Accessories pack for Sunsynk batteries Battery to battery cable required for linking Sunsynk batteries TThe SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled   Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes Please note that we are still waiting for Sunsynk to adjust the existing documentation so that it is specific to this ECCO range. This process is underway and we will add all relevant documents to the documents tab below as they are received from the manufacturer. If you require a specific document which is not currently available please contact us for assistance.
Sunsynk ECCO 5Kw On & Off grid Hybrid solar & wind Inverter £1,275+vat £1,530.00 incl. VAT
Sunsynk ECCO 5Kw Hybrid Inverter solar & wind Inverter #1:SUN-5.0-ECCO  Storage Systems - Hybrid Inverter    Sunsynk 5w Data Sheet  Sunsynk 5Kw Installation Manual  Sunsynk 5Kw Warranty  Sunsynk 5Kw G99 Certificate *Collections are not permitted due to health & safety regulations*   Accessories pack for Sunsynk batteries Battery to battery cable required for linking Sunsynk batteries The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Product Features: Dual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring   Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes Please note that we are still waiting for Sunsynk to adjust the existing documentation so that it is specific to this ECCO range. This process is underway and we will add all relevant documents to the documents tab below as they are received from the manufacturer. If you require a specific document which is not currently available please contact us for assistance.
1 review Sunsynk ECCO 8Kw On & Off grid Hybrid solar & wind Inverter £1,720+vat £2,064.00 incl. VAT
Sunsynk ECCO 8K Hybrid Inverter solar & wind Inverter #0:Riverlsea #1:SUN-8.0-ECCO     Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate *Collections are not permitted due to health & safety regulations* Accessories pack for Sunsynk batteries Battery to battery cable required for linking Sunsynk batteriesThe Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring   Supplier Part No: Sunsynk-8.8-K-SG01LP1 ECCORated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
54 reviews PylonTech US2000C 2.4kWh Solar Battery Storage £830+VAT £996.00 incl. VAT
Turbo PylonTech US2000C 2.4kWh Solar Battery Storage 95% DOD Please view our battery storage information page for sizing and selecting the right battery storage system for you. *Collections possible by prior arrangement, delivery cost will be refunded once processed 2 day delivery available by request. Please add a delivery date request in the shipping notes upon ordering for earlier delivery date.  US2000C Datasheet US2000C Installation Manual US2000C Warranty US2000C Compatibility Sheet  OEM Statement   #1: TURBO-PYLON-US2000C   Automatic discount for 4+: £10/battery  Automatic discount for 8+: £20/battery  Automatic discount for 12+: £30/battery For deposit payments, volume discount will be applied to the balance.    Please note these models include a 'Turbo' branding but are original Pylontech batteries with no differences at all to regular Pylontech batteries.   Connecting cables included as standard   *Collections permitted by prior arrangement. Delivery difference will be refunded after arrangement To build your complete system please visit our Pylontech main page Please note these models include a 'Turbo'branding but are original Pylontech batteries with regular Pylontech warranty.   Recommended charger: Turbo 5kw On & Off grid hybrid inverterThe US2000C with 95% DOD & 10 yr warranty is an HESS battery system provided by Pylontech. The US2000C is the latest battery system provided by Pylontech. It’ s long life character, highest energy and power density in the industry, fashionable design, easiness of installation and expansion, all reflects the real requirements of end users and strongest technical capability of Pylontech.Developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.Advantages- Vertical industry integration ensures more than 6000 cycles with 95% DoD- Compact and fashionable design fits comfortably in your home environment- Deliver up to 5kW with single module Pylontech 2.4kWh battery- Modular design gives the end customer the power of choice over capacity- Compatible with the majority of available Hybrid inverters- Simple buckle fixing minimizes the installation time and cost- Safety Cert. TÜV CE UN38.3 TLC- 10 yr warranty     To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support    * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer.
2 reviews PylonTech US3000C 3.5kWh 95% D.O.D Battery Storage £1,060+vat £1,272.00 incl. VAT
Turbo PylonTech US3000C 3.5kWh Li-Ion Solar & wind Battery Storage D.O.D of 95% #1: TURBO-PYLON-US3000   *Collections possible by prior arrangement, delivery cost will be refunded once processed 2 day delivery available by request. Please add a delivery date request in the shipping notes upon ordering for earlier delivery date.   Please view our battery storage information page for sizing and selecting the right battery storage system for you.  US3000C Datasheet  US3000C Installation Manual  US3000C Warranty  US3000C Compatibility Sheet  OEM Statement  Please note these models include a 'Turbo' branding but are original Pylontech batteries with no differences at all to regular Pylontech batteries.   UK delivery only   Automatic discount for 4+: £10/battery  Automatic discount for 8+: £20/battery  Automatic discount for 12+: £30/battery   To view complete Pylon kits please visit our Pylontech main page    Recommended charger: Turbo 5kw On & Off grid hybrid inverter   Battery to battery connecting cables included as standard The next generation of affordable, reliable storage has arrived. Pylontech's US2000B and US3000 batteries have been a frequent choice for prudent installers who value reliability, wide compatibility and ease of use. Now Pylontech have released an enhanced version of both 2.4kWh and 3.5kWh Li-ion units with impressive features. In a nutshell the new US2000C and US3000C batteries offer a higher depth of discharge - now a staggering 95% - and 16 units can be installed in parallel - double the capacity than before!The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.The Pylontech US3000C has an incredible DoD of 95%.Advantages- Vertical industry integration ensures cycle life of 6000 cycles- Compact and fashionable design fits in your home environment- Deliver up to 3.5kW* with single module (3.5kWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.8kW per battery- Modular design gives the end customers the power of choice of capacity- Compatible with large number of Hybrid inverters- Simple buckle fixing minimize the installation time and cost- Provides pre-charge function to protect ESS system from surge current.- Up to 16 units can be stacked in parallelTo extend the warranty you have to register here: http://en.pylontech.com.cn/service/supportThe US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank.    * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer.
31 reviews PylonTech US5000 4.8kWh 95% D.O.D Battery Storage £1,378+vat £1,653.60 incl. VAT
Pylon US5000 4.8kWh Li-Ion Solar Battery 48V Please view our battery storage information page for sizing and selecting the right battery storage system for you. #1 PYLON-US5000   *Collections possible by prior arrangement, delivery cost will be refunded once processed 2 day delivery available by request. Please add a delivery date request in the shipping notes upon ordering for earlier delivery date.   US5000 Datasheet US5000 Installation Manual US5000 Warranty US5000 Compatibility Sheet   UK delivery only   Automatic discount for 4+: £10/battery  Automatic discount for 8+: £20/battery  Automatic discount for 12+: £30/battery    For deposit payments, volume discount will be applied to the balance.   Connecting cables included as standard   To view complete kits please visit our Pylontech main page  Recommended charger: Turbo 5kw On & Off grid hybrid inverter A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market.  Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands   To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support Supplier Part No: US5000 Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W      * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries ahave been insatlled by an electrician or authorised installer.
Sold out
Sunsynk 5.12kWh 100% D.O.D CATL Battery LFP £1,910+vat £2,292.00 incl. VAT
Sunsynk 5.12kWh 100% D.O.D CATL Battery LFP  Please view our battery storage information page for sizing and selecting the right battery storage system for you. #1: SUN-BAT-CATL-5.12*Collections are not permitted due to health & safety regulations*Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack Accessories pack for Sunsynk batteries Battery to battery cable required for linking Sunsynk batteries Introducing Sunsynk's energy storage module well designed for residential UPS and off-grid applications.  Product Features Long life span with an expected life of 10-years 5-year product warranty and 10-year performance warranty Parallel capability of 16 units Up to 5 batteries per inverter 100% Depth of Discharge 5.12kW maximum discharge power (C1 rated)  Batteries provide excellent thermal stability and storage and also has a self-monitoring function to detect abnormalities.  IP rating 40 Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W
1 review Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) £53 +vat £63.60 incl. VAT
Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh)#1: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.
Accessories Pack for Sunsynk Hybrid Solar Inverters £116 +vat £139.20 incl. VAT
Accessories pack for Sunsynk Hybrid solar Inverters*Collections are not permitted due to health & safety regulations* Package includes: 2 x BATCAB35-1M-PAIR - Pair of BATCAB35-1M 1 x KETO-1-160A - KETO 1 Battery Disconnector with 160A Fuses 2 x LUG35-8 - 35mm2 Cable Terminal Lug M8 – Single   The correct Battery to inverter cable will also be required depending whether it's to go with a Sunsynk or Sunynk BYD battery.   A battery to battery cable is also required for each additional battery  
Battery to Battery Cable Pack Short for Sunsynk £66 +vat £79.20 incl. VAT
Battery to Battery Cable Pack Short for Sunsynk#1: SUN-CABLE-SHORT Storage Systems - AccessoryBattery to Battery short cable pack. Length: 30 cm.
Battery to Inverter Cable Pack Long for Sunsynk £76 +vat £91.20 incl. VAT
Battery to Inverter Cable Pack Short for SunsynkPart No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack. 
KETO Battery Disconnector with 40A Fuses £39+vat £46.80 incl. VAT
KETO Battery Disconnector with 40A Fuses  #1: KETO-00-40A Storage Systems - Battery Fuse Holder This part is made up of the following items: 1 x KETO-00        Fuse-switch-disconnector KETO size 00 body (battery isolator)     2 x N5013407-40A           NH Fuse-link 40A for KETO-00     Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 00 Maximum DC current = 40A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 DIN rail mountable This part is the Keto-00 disconnector switch with 2 x 40A fuse links. 
KETO Battery Disconnector with 80A Fuses £44+vat £52.80 incl. VAT
KETO Battery Disconnector with 80A Fuses  #1: KETO-00-80A Storage Systems - SN Only available to purchase together with other items This part is made up of the following items: 1 x KETO-00        Fuse-switch-disconnector KETO size 00 body (battery isolator)     2 x N5013407-80A           NH Fuse-link 80A for KETO-00     Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 00 Maximum DC current = 80A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 DIN rail mountable This part is the Keto-00 disconnector switch with 2 x 80A fuse links. 
KETO 1 Battery Disconnector with 160A Fuses £86 +Vat £103.20 incl. VAT
KETO Battery Disconnector with 160A Fuses  #1: KETO-00-160A Storage Systems  This part is made up of the following items: 1 x KETO-00        Fuse-switch-disconnector KETO size 00 body (battery isolator)     2 x N1014905-160A          NH Fuse-link 160A for Keto 1   Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 1 Maximum DC current = 250A DC voltage rating: 440V Overall width: 184mm System size: 300mm Terminals: M10 lugs with cable area from 25-150mm2 DIN rail mountable
KETO 1 Battery Disconnector with 200A Fuses £88+vat £105.60 incl. VAT
KETO Battery Disconnector with 200A Fuses  #1: KETO-1-200A Storage Systems  This part is made up of the following items: 1 x KETO-1        Fuse-switch-disconnector KETO size 1 body (battery isolator)     2 x N1015205-200A          NH Fuse-link 200A for Keto 1   Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 1 Maximum DC current = 250A DC voltage rating: 440V Overall width: 184mm System size: 300mm Terminals: M10 lugs with cable area from 25-150mm2 DIN rail mountable

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts

Visa Mastercard Maestro JCB American Express Google Pay Shop Pay