Solax Battery Storage Range (28)

SolaX V2 Triple Power HV 5.8kWh LFP Extension Battery SLAVE#RS:  #1: HV11550-58-SLAVE-V2 Storage Systems - Lion Battery Pack SolaX V2 Datasheet SolaX V2 Installation Manual SolaX V2 Warranty   V2 batteries confirmed to be compatible with V1 slave batteries   *Collections are not permitted due to health & safety regulations* Solax Triple Power LFP Extension Battery (Slave) HV11550-58 The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power LFP battery is available as Master Battery 5.8kWh and Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity. Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total). - Additional features:- Scalable to 23.2kWh- Up to 4kW charge/discharge- High Voltage means thinner cables are required.- Compact Design- 90% Depth of discharge- 6000 life cycles- Easy installation – plug and play with all cables supplied Triple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries. They are NOT compatible with Generation 1 or 2 BMS or Batteries! Solax LFP 5.8kWh batteries will initially arrive with Blue TOP. This will change to Black TOP at some point in the near future.Please note this is a HV11550-58 Extension (Slave) Battery only, it requires HV-T-BAT-H-58 Main Battery(Master) to work.   Weight: 72.2 kgBattery Type: Lithium IonNominal Energy: 5800 WhDepth of discharge: 100.00 %Voltage: 115 VContinuous Discharge Rate (Normal Use): 2875 WMaximum Discharge Rate (5 Minutes): 4000 WSurge Discharge Rate (15 Seconds): 4000 WMaximum Charge Rate (5 Minutes): 4000 W

SolaX V2 Triple Power HV 5.8kWh LFP Main Battery MASTER#1: HV-T-BAT-H-58-MASTER-V2 Storage Systems - Lion Battery Pack V2 batteries confirmed to be compatible with V1 slave batteries   SolaX 5.8kWh Data Sheet  SolaX 5.8kWh Manual  SolaX 5.8kWh Warranty *Collections are not permitted due to health & safety regulations* Solax Triple Power LFP Main Battery (Master) T-BAT-H-58 The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power LFP battery is available as Master Battery 5.8kWh and Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity. Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total). Additional features: Scalable to 23.2kWh Up to 4kW charge/discharge High Voltage means thinner cables are required. Compact Design 90% Depth of discharge 6000 life cycles Easy installation – plug and play with all cables supplied Solax LFP 5.8kWh batteries will initially arrive with Blue TOP. This will change to Black TOP at some point in the near future. Triple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries. They are NOT compatible with Generation 1 or 2 BMS or Batteries!   Weight: 72.2 kgBattery Type: Lithium IonNominal Energy: 5800 WhDepth of discharge: 100.00 %Voltage: 115 VContinuous Discharge Rate (Normal Use): 2875 WMaximum Discharge Rate (5 Minutes): 4000 WSurge Discharge Rate (15 Seconds): 4000 WMaximum Charge Rate (5 Minutes): 4000 W

SolaX Master Box BMU +1 x SolaX Triple Power 3.0kWh Battery # 3: 1T-BAT-SYS-HV-3.0+BMU  SolaX Triple Power Data Sheet  SolaX Triple Power Manual *Collections are not permitted due to health & safety regulations* With the latest Triple Power 3.0kWh battery, SolaX have designed and developed the future of residential energy storage. A wider temperature tolerance and the ability to fully charge the batteries in one hour give the G4 systems great flexibility. Up to four of these batteries can be connected to each other to give a 12kWh system depending on the inverter used in combination. BMS Master Box for the TP3.0 3kWh SolaX batteries includes a wall mounting bracket and battery base. This Kit includes:  1x SolaX Triple Power 3.0kWh Battery 1x SolaX Master Box BMU 1x Cable kit For a full list of SolaX products click here. 

SolaX Master Box BMU +2 x SolaX Triple Power 3.0kWh Battery # 3: 2T-BAT-SYS-HV-3.0+BMU  SolaX Triple Power Data Sheet SolaX Triple Power Manual *Collections are not permitted due to health & safety regulations* With the latest Triple Power 3.0kWh battery, SolaX have designed and developed the future of residential energy storage. A wider temperature tolerance and the ability to fully charge the batteries in one hour give the G4 systems great flexibility. Up to four of these batteries can be connected to each other to give a 12kWh system depending on the inverter used in combination. BMS Master Box for the TP3.0 3kWh SolaX batteries includes a wall mounting bracket and battery base. This Kit includes:  2x SolaX Triple Power 3.0kWh Battery 1x SolaX Master Box BMU For a full list of SolaX products click here. 

SolaX Master Box BMU +1 x SolaX Triple Power 3.0kWh Battery # 3: 3T-BAT-SYS-HV-3.0+BMU  SolaX Triple Power Data Sheet  SolaX Triple Power Manual *Collections are not permitted due to health & safety regulations* With the latest Triple Power 3.0kWh battery, SolaX have designed and developed the future of residential energy storage. A wider temperature tolerance and the ability to fully charge the batteries in one hour give the G4 systems great flexibility. Up to four of these batteries can be connected to each other to give a 12kWh system depending on the inverter used in combination. BMS Master Box for the TP3.0 3kWh SolaX batteries includes a wall mounting bracket and battery base. This Kit includes:  3x SolaX Triple Power 3.0kWh Battery 1x SolaX Master Box BMU 1x 3 Battery Kit 1x SolaX Battery Base For a full list of SolaX products click here. 

SolaX Master Box BMU +4 x SolaX Triple Power 3.0kWh Battery # 3: 4T-BAT-SYS-HV-3.0+BMU SolaX Triple Power Data Sheet SolaX Triple Power Manual *Collections are not permitted due to health & safety regulations* With the latest Triple Power 3.0kWh battery, SolaX have designed and developed the future of residential energy storage. A wider temperature tolerance and the ability to fully charge the batteries in one hour give the G4 systems great flexibility. Up to four of these batteries can be connected to each other to give a 12kWh system depending on the inverter used in combination. BMS Master Box for the TP3.0 3kWh SolaX batteries includes a wall mounting bracket and battery base. This Kit includes:  4x SolaX Triple Power 3.0kWh Battery 1x SolaX Master Box BMU 1x 4 Battery Kit 1x SolaX Battery Base For a full list of SolaX products click here. 

SolaX V2 Triple Power HV 5.8kWh LFP Main Battery MASTER#1: SOLAX-BMS-PB Storage Systems - Accessory  SolaX BMS Datasheet  SolaX BMS Manual *Collections are not permitted due to health & safety regulations* SOLAX BMS Parallel Box This BMS is ideal for use with the X1 and X3 Hybrid Inverters. It allows you to double the storage capacity with the Triple Power 5.8kWh batteries. The BMS parallel box acts as a replacement for the Master battery. If retrofitting the parallel box to an existing system, the Master battery becomes redundant and cannot be installed with the parallel box. How many batteries can I install with this product? Single Phase: 2, 4 or 6 Triple Power 5.8kWh SLAVE batteries Three Phase: 4, 6, 8 Triple Power 5.8kWh SLAVE batteries A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product. Features  Increase the capacity of ESS Extend the working hours of ESS Dual-module in case Prolong the batteries life due to the alternate use of dual-module IP55 Weight: 5.2 kg Length: 368 mmHeight: 310 mmDepth: 140 mm

SolaX X1 AC Coupled Battery Inverter HV 3.0kW Charges From Grid # 1 X1-AC-3.0  SolaX1 AC Data Sheet  SolaX1 AC User Manual  SolaX AC Warranty  SolaX AC 100 Certification Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.  *Collections are not permitted due to health & safety regulations* X1 AC ChargerUpgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud.Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter.UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version.Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Max power: 3000WMax current: 13.6ANumber of phases: 1Max efficiency:  96.50%IP rating: IP65Weight: 15.5kgDimensions: 430*341.5*143mm

SolaX X1 AC Coupled Battery charger Inverter HV 3.6kW charges from grid# 1 X1-AC-3.6  Storage Systems - AC Battery Charger  SolaX1 AC Data Sheet  SolaX1 AC User Manual  SolaX AC Warranty  SolaX AC 100 Certification Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX ClouFor a full list of SolaX products click here.  *Collections are not permitted due to health & safety regulations* X1 AC ChargerUpgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud.Additional features:High voltage battery support means thinner cables are required7.5kW Max charge/dischargeWifi or LAN stick available separatelySuitable for grid trading applications with less than 0.5s response timeCharging from grid possibleNatural Cooling, quiet and low maintenancePlease note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter.UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version.Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland.

SolaX X1 Fit AC Coupled Battery charger Inverter HV 5.0kW #1: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter   Sola X1 RetroFit Inverter Data Sheet  Solax X1 RetroFit Inverter User Manual  Solax X1  RetroFit Inverter Warranty  Solax X1 RetroFit G99 Certification Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.  *Collections are not permitted due to health & safety regulations* Full list of SolaX products X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. A LOT BETTER VALUE IF BOUGHT AS A PACKAGE BELOW!

SolaX X3 G4-V2 Hybrid 3 Phase Inverter HV 15.0kW #1: X3-HYBRID-G4-15.0-V2  SolaX X3 Data Sheet  SolaX X3 Manual  SolaX X3 Warranty  SolaX X3 G100   *Collections are not permitted due to health & safety regulations* For a full list of SolaX products click here.  High-efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment   Weight: 30 kgRated Power: 15,000 WMin PPT Voltage: 180 VMax PPT Voltage: 950 VDC Startup Voltage: 200 VDC Shutdown Voltage: 200 VMax Input Voltage: 950 VMax DC Power: 18,000 WMax AC Power (5 Minutes): 15,001 WSurge AC Power (1 Second): 15,002 WMax DC Current: 26 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIXIncluded Connectors: 2Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years

SolaX 3kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.0-V2 For a full list of SolaX products click here.     SolaX 3kW Data Sheet  SolaX 3kW Installation Manual  SolaX 3kW Warranty  SolaX 3kW G98 Certificate *Collections are not permitted due to health & safety regulations* This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time, you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Weight: 24 kg Rated Power: 3,000 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 4,500 WMax AC Power (5 Minutes): 3,300 WSurge AC Power (1 Second): 3,900 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIX  Included Connectors: 2Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 10 years

SolaX 5.0kW G4-V2 Hybrid inverter with Wi-Fi #1: X1-HYBRID-G4-5.0-V2  For a full list of SolaX products click here.     SolaX 5kW Data Sheet  SolaX 5kW Installation Manual  SolaX 5kW Warranty  SolaX 5kW G99 Certificate *Collections are not permitted due to health & safety regulations* This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time, you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Weight: 24 kgRated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 7,500 WMax AC Power (5 Minutes): 3,300 WSurge AC Power (1 Second): 5,500 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIX  Included Connectors: 2Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 10 years

SolaX X1 G4 Hybrid Inverter 6kW #1: X1-Hybrid-6.0-D Solax X1 G4 Data Sheet  Solax X1 G4 User Manual  Solax X1 G4 Warranty  Solax X1 G4 G99  *Collections are not permitted due to health & safety regulations* SolaX X1 G4 Hybrid 6.0D This is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The X-Hybrid is can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. Key features In-built EPS changeover switch Supports up to 150% oversizing Can work at full capacity down to -35C 30A Charge/discharge capability On-grid and off-grid use Includes WiFi Dongle AC attributes Max power: 6000W Max current: 28.6A Number of phases: 1 DC attributes Max power: 9000W Max Isc current: 16A Max voltage: 600V Start up voltage: 90V System Max efficiency: 97.6% IP rating: IP65 Weight: 22kg Dimensions: 482*417*181mm

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 10kW  #1: X3-FIT-10  Solax X3 Inverter Data Sheet  Solax X3 Inverter User Manual  Solax X3 Inverter Warranty   Solax X3 Inverter G99 Certification  Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.  *Collections are not permitted due to health & safety regulations* Three Phase Retro Fit 10.0kW AC Coupled inverter Product Features Compatible with High voltage batteries IP65 protection rating Natural cooling and low maintenance Max Efficiency up to 96% This is the E version of the inverter with built in EPS function. It required external back up box to fully utilise the EPS function. It can be used with between 2 and 4 Solax Triple Power Batteries (one size batteries per system only). This inverter can be paralleled up to 5 units per site.