Victron Energy Range (10)

Victron Bluetooth Smart Dongle  #1: #2: ASS030536011 The Bluetooth Smart Connect Dongle from Victron allows wireless interface and monitoring of various Victron Energy products, including MPPT charge controller, inverter, battery monitors, via a compatible smartphone. This is similar to the MPPT Control Monitor, providing more details and is compatible with a larger array of products. Connection is simple; Once connected and paired using the Smart Connect app, (available from Google Play or the Apple Store), the connected device will stream live information to your smartphone. Please see the Victron Smart Connect Manual for a list of compatible products and smartphones. Please note that Android 4.3 and iOS8 are the minimum required software versions and the device must be Bluetooth 4.0 ready. Features Real-time monitoring of voltage, current and power Ultra low power consumption Provides logging data to smartphone Can be used to remotely update the firmware of compatible Victron products such as MPPT chargers

Victron Cerbo-S GX  3: CERBO-SGX   Victron Cerbo-S GX Datasheet  Victron Cerbo-S GX Manual *Collections are not permitted due to health & safety regulations*  The Cerbo-S GX does not have a BMS-CAN port, tank level inputs, or temperature sense inputs.This all-new communication centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, an MFD or the VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.   Perfect monitoring & controlInstantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely.Maximise your system performanceThe Cerbo GX maximises the performance of your systems components in real-time and keeps them in perfect tune. With its Dual Core Processor and the addition of an extra CAN-bus port you can now support even bigger systems; closely follow managed lithium batteries while the second port can support up to 25 simultaneously connected VE.Can solar chargers. The new NMEA 2000-out support has the GX easily integrated into any boats network. Four tank and four temperature ports as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level. Expand your viewThe new optional GX Touch 50 display allows you to have an instant overview of your system and adjust settings very quickly. Its super slim 5 inch waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.Simple mounting and configurationThe Cerbo GX is now optimised to more than meet the standards of installer professionals. The device is easily mountable on a DIN-Rail (with DIN35 adapter small, not included) and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Its new Bluetooth feature enables a quick connection and configuration via our VictronConnect app.Outsmart any power challengeThe Cerbo GX serves many purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or Backup & Off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts, and diverts excess (solar) power to self-consumption.

Victron MultiPlus 48/3000/35-16 230V VE.Bus Victron MultiPlus 48 Data Sheet *Collections are not permitted due to health & safety regulations*  The Victron MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. The Multiplus can take an input from a generator or grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. Please see the 'Self-consumption' manual below for further details on configuring this way. Up to 6 Multiplus units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications:DC Input: 38-66V (48V)Continuous Output Power: 3000VA (2500W)Peak Power: 6000WMaximum Efficiency: 94%Zero-Load Power: 25WAC Input: 187-265VAC 45-65HZMax Charge Current: 35A (12V)AC Transfer Relay: 16ADimensions: 362x258x218 mmWeight: 18kgWarranty: 5 yearsAvailable in 12V, 24V and 48V models.

Victron MultiPlus-II 48/5000/70-50 230V   Victron MultiPlus Data Sheet   Victron MultiPlus Manual *Collections are not permitted due to health & safety regulations*  All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II  Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 5000VA (4000W) Peak Power: 9000W Maximum Efficiency: 96% Zero-Load Power: 2-18W AC Input: 187-265VAC 45-65HZ Max Charge Current: 70A (48V) AC Transfer Relay: 50A Dimensions: 565 x 323 x 148mm Weight: 29kg Warranty: 5 years

Victron EasySolar-II 48V 3000VA MPPT 250/70 GX   Victron EasySolar Data Sheet   Victron EasySolar Manual *Collections are not permitted due to health & safety regulations*  All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring saving you time and space.The 24V model contains two of the superb Blue Solar MPPT 100/50, allowing up to three strings of PV panels to be connected with three sets of MC4 PV connectors. The 48V model includes two of the Blue Solar 150/35 MPPT controllers for larger PV arrays.The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.AC distribution The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.Inverter specs:Input Voltage Range: 19-33V (24V);Continuous Output Power at 25 degrees C: 3000VA/2500WPeak Power: 6000WMaximum Efficiency: 94%Zero-Load Power: 15-16WCharger specs:AC Input: 187-265VAC 45-65HZCharger Current: 70A (24V); 35A (48V)Solar MPPT ControllerMax PV Open Circuit Voltage: 100V (24V);Max PV Power: 2 x 1400W (24V);Max Output Current: 2 x 50A;Enclosure:Weight: 21kgDimensions (h x w x d): 362 x 374 x 218 mm

Victron MultiPlus-II 48/5000/70-50 230V GX   Victron 230V GX Data Sheet Victron 230V GX Manual *Collections are not permitted due to health & safety regulations*  All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II  Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 5000VA (4000W) Peak Power: 9000W Maximum Efficiency: 96% Zero-Load Power: 2-18W AC Input: 187-265VAC 45-65HZ Max Charge Current: 70A (48V) AC Transfer Relay: 50A Dimensions: 565 x 323 x 148mm Weight: 29kg Warranty: 5 years

Victron MultiPlus-II 48/10000/140-100/100 230V   Victron MultiPlus-II 48 Data Sheet  Victron MultiPlus-II 48 Manual *Collections are not permitted due to health & safety regulations*  All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II  Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10000VA (8000W) Peak Power: 18000W Maximum Efficiency: 96% Zero-Load Power: 38W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A (48V) AC Transfer Relay: 100A M8 bolts (2 plus and 2 minus battery connections) Dimensions: 677 x 363 x 206mm Weight: 49kg Warranty: 5 years

Victron Quattro 48/10000/140-100/100 230V VE.Bus    Quattro 48 Data Sheet Quattro 48 Manual *Collections are not permitted due to health & safety regulations*  The 10kW Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems.   The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc.   Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10,000VA (8000W) Peak Power: 20,000W Maximum Efficiency: 96% Zero-Load Power: 10-35W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A AC Transfer Relay: 2 x 100A Dimensions: 470x350x280 Weight: 45kg Warranty: 5 years   Available in 48V models only.

Victron Quattro 48/15000/200-100/100 230V VE.Bus    Quattro 48 Data Sheet Quattro 48 Manual *Collections are not permitted due to health & safety regulations*  The 15kVA Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems.   The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc.   Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 15,000VA (12,000W) Peak Power: 25,000W Maximum Efficiency: 96% Zero-Load Power: 110W AC Input: 187-265VAC 45-65HZ Max Charge Current: 200A AC Transfer Relay: 2 x 100A Dimensions: 572 x 488 x 344 mm Weight: 72kg Warranty: 5 years   Available in 48V models only.