Zappi Electric car charge point V2 - 7kW Type 2 Tethered - Black Ecosmart#0: RS#1: MYEN-ZAPPI-207TB UK delivery only:  next day delivery, 13.00 cut off  *Collections are not permitted due to health & safety regulations* For Myenergi - HUB : Myenergy Hub (for wireless monitoring & updates) click here. For Myenergi Harvi - energy harvesting wireless sensor click here.  Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, Zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-Phase Key Features- 3 charging modes (Fast, Eco and Eco+) -Type 2 tethered cable (6.5m)- OLEV approved- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor   Technical Data- Rated Power: 7kW (1-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006- Operating Temperature: -25°C to +40°C- Circuit Breaker: 40A curve B (2-pole 1-ph)- Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)- Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles

Zappi Electric car charge point V2 - 7kW Type 2 Tethered White Ecosmart#0: RS#1: MYEN-ZAPPI-207TW - 7kW Tethered White UK delivery only:  next day delivery, 13.00 cut off  *Collections are not permitted due to health & safety regulations* For wireless monitoring & updates: Myenergi - HUB: Myenergy Hub For energy harvesting wireless sensor: Myenergi Harvi Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station. 7kW Single Phase 22kW 3-PhaseKey Features- 3 charging modes (Fast, Eco and Eco+)- OLEV approved -Type 2 tethered cable (6.5m)- Optimises microgeneration self-consumption- Works with solar PV or wind turbine systems- Economy tariff sense input- Programmable timer function- Charge and event logging- Pin-code lock function- Tap operated display backlight- Built-in RCD protection- Integral cable holster- Remote control and monitoring add-on option- Supplied with clip-on grid current sensor Technical Data- Rated Power: 7kW (1-ph)- Rated Supply: Voltage 230V AC Single Phase or 400V AC 3-phase (+/- 10%)- Supply Frequency: 50 Hz- Rated Current: 32A max- Standby Power Consumption: 3W- Earth Leakage Protection: Integral 30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)- Economy Tariff Sense Input: 230V AC sensing (4.0kV isolated)- Wireless Interface: 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options- Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter- Supply Cable Entry: Rear, bottom or side- Enclosure Dimensions: 439 x 282 x 122mm- Protection Degree: IP65 (weatherproof)- Enclosure Material: ABS 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey RAL 9006Operating Temperature: -25°C to +40°CCircuit Breaker: 40A curve B (2-pole 1-ph)Earthing Arrangement TN : Can be connected to the PME supply. Complies with BS 7671:2018, 722.411.4.1 (iii)Earthing Arrangement TT : Earth resistance < 200 Ω according to BS 7671:2018, or < 100 Ω for some vehicles

PylonTech US3000C 3.5kWh Li-Ion Solar & wind Battery Storage D.O.D of 95%#0: RS#1: PYLON-US3000C Storage Systems - Li-ion Battery Pack#2: Pylon 3.5kwh US3000 C Li-ion Battery *Please note that due to global supply issues many products especially Pylontech currently often have delays in their expected delivery dates. Pre-orders are welcome to reserve stock but please allow for delays. Deposits are of course refundable at anytime.   Fully compatible with all other US2000 & US3000 batteries. UK orders – next day delivery, 13.00 cut off EU orders – typically 5-7 business days delivery, delivered from EU stock to avoid additional customs charges and delays. Please check EU stock availability prior to purchase. *Collections are not permitted due to health & safety regulations*Compatible AC chargers:  Solis RAI Compatible Hybrid inverter battery chargers:Solis 3kw, Solis 3.6kw, Solis 4.6kw, Solis 5kw, Sofar 3kw, SoFar 3.6kw, SoFar 5kw, SoFar 6kw. Long cable for connecting the master battery to a battery charger. (Short cable for connecting batteries is included) You may order optional brackets here.  The next generation of affordable, reliable storage has arrived. Pylontech's US2000B and US3000 batteries have been a frequent choice for prudent installers who value reliability, wide compatibility and ease of use. Now Pylontech have released an enhanced version of both 2.4kWh and 3.5kWh Li-ion units with impressive features.In a nutshell the new US2000C and US3000C batteries offer a higher depth of discharge - now a staggering 95% - and 16 units can be installed in parallel - double the capacity than before!The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.The Pylontech US3000C has an incredible DoD of 95%.Advantages- Vertical industry integration ensures cycle life of 6000 cycles- Compact and fashionable design fits in your home environment- Deliver up to 3.5kW* with single module (3.5kWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.8kW per battery- Modular design gives the end customers the power of choice of capacity- Compatible with large number of Hybrid inverters- Simple buckle fixing minimize the installation time and cost- Provides pre-charge function to protect ESS system from surge current.- Up to 16 units can be stacked in parallelYou can now register the Pylon US3000C for an additional 3 years of manufacturer warranty for free. Go to Pylontech Service Support and complete the information in the 'sign up battery' page. The US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank.

SoFar Solar ME3000SP AC Solar & wind battery storage controller #0: RS#2: Sofar ME3000SP   UK delivery only:  next day delivery, 11.30 cut off  *Collections are not permitted due to health & safety regulations* Additional 5 yr warranty Additional 15 yr warranty This AC coupled battery storage system from SoFar solar offers tremendous value. As this is an AC coupled kit it is suitable for any existing or new PV array, even those with dual tracker inverters, microinverters or power optimisers. Monitoring is built in as standard and can be viewed via their android app. Charging from the grid is also possible meaning that customers on Economy 7 or similar can take advantage of this and store electricity overnight for use in the morning, before the PV has fired up.   Chint NC1-2508 Contactor for EPS mode available here Pylontech US2000 kits with ME3000 available here Pylontech US3000 kits with ME3000 available here     Initial commissioning process: Turn everything off (inc. PV) Turn the battery / batteries on (until they flash run) Turn AC power on to the Sofar unit Wait 2 min Turn PV on   Maximum 8 x Pylon batteries can be connected. Sofar Solar Battery Storage systems are simple to install and highly flexible. Commonly referred to as AC battery storage system as this system is installed on the ‘AC’ side of any installation. The ME3000SP is an AC coupled battery storage solution which connects directly to the customer’s consumer unit. This is the reason it is compatible with almost any type of inverter or micro-inverter or optimiser system.   You can start with just a single Pylon Battery, and add more pylon batteries up to a total of 8 pylon battery units to one SoFar ME3000SP unit.   This is a single phase system. The system can be used for 3 phase battery storage, but only by treating each phase as a single phase installation. In this way it is possible to have a 3 phase battery storage solution using the SoFar ME3000sp system, however it must be understood that each phase is treated separately, and the ME3000SP unit is still limited to its maximum charge and discharge rate of 3kw.   A basic system consists of the SoFar ME3000SP controller and just one Pylon battery unit which is 2.4kwh. Each time an additional Pylon battery is added, you are adding 2.4kwh of capacity.   The So Far battery systems are supplied with the necessary cables for connecting the batteries together – the short cable sets – and one set of long cables for connecting the battery bank to the SoFar ME3000SP.   AC Charging and AC discharging programming The SoFar battery storage system can charge the Pylon Batteries from the AC power of the property. As this is an AC coupled battery storage system, the unit can be programmed to fill the batteries up to a determined percentage for any period during the 24 hr cycle. Indeed it is possible to programme when the batteries Discharge also should you wish to prioritise certain times. Contact us for information on programming these features.

Alpha Smile 5 5.7kWh Parallel Connection Expansion Battery 96% D.O.D#1: ALPH-SMILE5-BAT-IP65 UK delivery only:  – next day delivery, 15.30 cut off  *Collections are not permitted due to health & safety regulations* This battery comes with 10 Year Warranty. PLEASE NOTE: As per Alpha ESS Warranty document “It is required that all systems have internet connection for monitoring. Those systems that are not connected to the internet the warranty is then reduced to 3 years. “ Please note we are waiting for the following from the manufacturer: UN38.3 Test Certificate EC Declaration Material Safety Datasheet

GivEnergy 5.2kWh Eco LiFePO4 Battery IP65#2: GivEnergy 5.2kWh LiFePO4 Battery UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* Up to 4 batteries can used with each AC charger/hybrid inverter, multiple charger/inverters can be installed. The 5.2 kWh battery pack uses a new battery case design with useful handles to make moving as easy as possible. The batteries incorporate the same Primsatic cell technology as the 2.4 and 8.2kWh batteries, ensuring lower wear and reduced thermal hotspots. The LiFePO4 chemistry is the safest cell technology on the market, whilst GivEnergy in particular offer higher capacity cells, higher density cells and monitor individual cell voltage rather than overall pack voltage. Electrical Total capacity: 5.2 kWh Usable capacity: 5.2 kWh Nominal V: 48V Operating V range: 44.4 - 57.6V Max charging V: 60V Max charge I: 60A Max discharge I: 60A System Life: 10 years at 80% DOD Chemistry: LiFeP4 Dimensions: 520*480*230mm Weight: 60 kg Temperature range: 0 - 45 degrees C IP rating: IP65 Warranty: 52MWh or 10 years, whichever is first

Tigo Optimiser TS4 Add-On Module - Optimised Part No: TS4-A-O Inverters - Optimisers UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* TS4-A-O PV Module Advanced Add-On/RetrofitThe TS4-A-O (Optimization) is the advanced add-on/retrofit optimization solution that brings smart module functionality to standard PV modules for higher reliability. Improve energy efficiency by upgrading underperforming PV systems or adding smart features to new installations.The TS4-A-O with UHD-Core technology and expanded specifications supports PV modules up to 500W.Easy InstallationSnap to standard module frame or remove brackets for rack mountingSmart CommissioningConfigure and commission with your Android or iOS mobile device

Solis 1.0kW Mini 5G Single Tracker Part No: SOL-1.0-MINI-5G UK delivery only:  next day delivery, 13.30 cut off  *Collections are not permitted due to health & safety regulations* For remote monitoring, please go to: Solis Data Logging stick  For additional 5 year warranty, click here. For additional 15 years warranty, click here.    Solis 1.0kW Mini 5G Single TrackerPart No: SOL-1.0-MINI-5G Inverters - Main Units Rating: 1,000W Phases: 1 All new Solis Mini 5G Series Grid-tie Inverter  Ultra low Startup Voltage  - 60V   High switch frequency technology-Smaller, smarter   DRM integrated fully comply with AS47772:2015   5 years standard warranty 20 years optional upgrade   Export Limitation built in - Requires CT clamp (sold separately)   Integrated AFCI (DC arc-fault circuit protection)

  350w Semi-flexible solar charging kit with 2.4Kw Gel battery storage This high efficiency waterproof 350W polycrystalline solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The solar panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it easily moulds to fit the shape of the roof. This panel can be easily mounted using the eyelets and quick-release fasteners that are provided with the panel. The solar kit includes: - 2 x 350W semi-flexible, textured solar panel made of plastic reinforced with glass fibre, with eyelets and fasteners (IEC certified) - 60A 12V/24V high efficiency MPPT solar charge controller with inbuilt LCD display -  2 x 200Ah 12V gel deep cycle battery - A pair of 5m 4.0mm thick single core extension cables with MC4 connectors - 5m 4.0mm thick double core battery cable with a fuse holder, 15A fuse and 8mm ring terminals 350W semi-flexible solar panel: This solar panel has a textured surface that reduces the reflection of light whilst maximising absorption of light from every possible angle. This ensures high performance of this solar panel in low light or cloudy conditions, or when the light falls at an angle (morning, evening or winter times). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is attached to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it a perfect choice for mounting on a boat deck. These Austrian manufactured solar panels are made to the highest European quality standards and are fully waterproof with a high resistance to salt water environments. High efficiency MPPT controller: The 40A high efficiency MPPT solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. The controller features a comprehensive set of electronic safety functions including protection against: reverse current at night (from the battery back to the solar panel), over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology.  The built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy. The easy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc). This controller is compatible with sealed, gel and flooded batteries and can automatically recognise 12V/24V battery systems. Advanced monitoring and programming: This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods   Using one of the communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more. Solar panel specifications: Peak power: 350W Maximum power voltage: 39.1V Maximum power current: 8.7A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 2024 x 991 x 2 mm Weight: 6.82 kg   Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24/36/48V selection for lead acid batteries 2 pairs of terminals (solar panel, battery) for wires up to 35mm2 Maximum solar panel voltage 150V Maximum solar panel power 750W (12V) / 1500W (24V) / 2200W (36V) / 3000W (48V) Temperature sensor for automatic compensation (-3mV/°C/2V)  Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (60A) Self-consumption: 98mA (12V) , 60mA (24V), 50mA (36V), 46mA (48V) Working temperature: -25°C to +60°C (temperature derating above 40°C) Size: 340 x 216 x 119 mm Mounting dimensions: 260 x 224 mm Weight: 4.5kg Multiple mounting holes (7mm diameter) for ease of installation Battery specifications (per battery): Nominal voltage: 12V Nominal capacity: 200Ah (10h rate) / 205Ah (20h rate) Maximum charging current: 40A Self-discharging rate: <1% per month Cycle lifetime at 30% D.O.D.: 1200-1300 Pressure control: safety valve installed Terminal type: F24 (bolts and washers included) Operating temperature: from -10C to +50C Size: 523 x 239 x 243 mm Weight: 61.5 kg

380W JA Solar Mono MBB Percium Half-Cell Silver Frame MC4 Solar Panel#1: JAM60S-20-380-MR-SF-MC4-SM Panels - Monocrystalline Minimum order: 3 panels. For orders less than 3 panels please visit our Single Panels page. Automatic online volume discount: 16+ Cut off time for next day mainland UK delivery: 15:30 EU orders – typically 5-7 business days delivery, delivered from EU stock to avoid additional customs charges and delays. Please check EU stock availability prior to purchase. *Collections are not permitted due to health & safety regulations* Part No: JAM60S-20-380-MR-SF-MC4-SM Panels - Monocrystallines Rating: 380W Efficiency: 20.4% Width: 1,052mm Height: 1,769mm Price per Watt: (24.7p/Wp) JA Solar 380W Mono MBB PERC Half-Cell Multi Bus Bar Module Short Frame. High output power Low shading effect Lower temperature coefficient Better mechanical loading tolerance 20.4% Module efficiency Product Warranty: 12 years  Performance Warranty: 25 years  This module has a Silver Frame and White Backsheet. This module is equiped with MC4 connectors and 1200mm output cable. Warranty: 12-year product & 25-year linear power output.