All products
Aiko
Air Source Heat Pumps
Air Source Heat Pumps Packages
All Black Solar Panlels
Alpha Battery Storage Range
Battery Storage
Best Selling Products
BiFacial Solar Panels
Bisol Solar panels
Build a PV kit
Bulk Deals
Canadian Solar
Commercial Battery Storage Systems
Design & Installations
Electric Boilers
Electric Car Chargers
Energy Saving & Accessory Products
Enphase IQ All in One
Enphase Micro Inverters
Eurener Solar Panels
Flexible & semi-flexible solar panels
Fox ESS Low Voltage
Fox ESS Solar Inverters
FOX HIGH VOLTAGE
Full Range of Solar Inverters
GivEnergy Battery Storage
Givenergy EV Car Charger
Growatt 6.5KWH Battery
Growatt AC-Coupled Inverter
Growatt Battery Storage
Growatt GBLI6532
Growatt Inverter 5KW Battery
Growatt Monitoring System
Growatt Solar Inverters
GSL Energy All In One
Hot Water All In One ASHP
Huawei Battery Storage
Huawei Optimisers
Hybrid Inverters / Battery Chargers
Hyundai Solar Panels
ICS
Infrared heating
JA Solar Panels
Jinko Solar Panel
LG Chem
Libbi All In One Home Battery Storage
Longi Solar Panels
Lower delivery cost available specifically for solar panels on this page from 1-4 panels
Most Popular
Mounting Options
Newest Products
Pylontech Battery
QCells Solar Panels
REC Solar panels
SMA Solar Inverters
SoFar Solar Inverters
Solar & Battery Storage Kits
Solar Accessories
Solar Panel Full Range
Solar Thermal
SolarEdge
SolarEdge Battery Storage
SolarEdge Optimisers
SolarEdge Optimizers / Enphase Micro-inverters International
SolarEdge Smart Solar Panel
Solax Battery Storage Range
Solax Inverters
Solis Solar Inverters
Special Offers
Sunpower Solar Panels
Sunsynk On & Off grid battery Storage
Swimming Pool ASHP
Tigo Optimisers
Trina Solar panels
Victron Complete Kits
Victron Energy Range
Viridian In-Roof Integrated Panels
Warranties
Bundle Sunsynk ECCO 3.6Kw On & Off grid Hybrid solar & wind Inverter with GSL 10.24kwh battery kit £3,208 +VAT
£3,849.60 incl. VAT
SPECIAL OFFER - Sunsynk ECCO 3.6Kw On & Off grid Hybrid solar & wind Inverter with GSL 10.24kwh battery kit
#1:SUN-3.6-ECCO-GSL-10.24 Storage Systems - Hybrid Inverter
Accessories included:
Comms cable - GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack - GSL-PWRCAB-2M-ORG
2m black & red battery cables - 2 x BATCAB35-1M-PAIR
35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8
Battery isolator - GIV-BAT-ISO-100A
Sunsynk 3.6Kw Data Sheet
Sunsynk 3.6Kw Installation Manual
Sunsynk 3.6Kw Warranty
Sunsynk 3.6Kw G99 Certificate
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled
Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
Sunsynk ECCO 3.6Kw On & Off grid Hybrid solar & wind Inverter with GSL 20.48 kwh battery kit £5,680 +VAT
£6,795.60 incl. VAT
SPECIAL OFFER - Sunsynk ECCO 3.6Kw On & Off grid Hybrid solar & wind Inverter with GSL 20.48kwh battery kit
#1: SUN-3.6-ECCO-GSL-20.48 Storage Systems - Hybrid Inverter
Sunsynk 3.6Kw Data Sheet
Sunsynk 3.6Kw Installation Manual
Sunsynk 3.6Kw Warranty
Sunsynk 3.6Kw G99 Certificate
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled
Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
Sunsynk ECCO 5Kw On & Off grid Hybrid solar & wind Inverter & GSL 10.24 kwh kit £3,510 +VAT
£4,135.20 incl. VAT
Sunsynk ECCO 5Kw On & Off grid Hybrid solar & wind Inverter & GSL 10.24 kwh kit
#1:SUN-5.0-ECCO-GSL-10.24 Storage Systems - Hybrid Inverter
Sunsynk 5Kw Data Sheet
Sunsynk 5Kw Installation Manual
Sunsynk 5Kw Warranty
Sunsynk 5Kw G99 Certificate
SUNSYNK-ACC-PACKGIV-BAT-ISO-100A
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Product Features:
Dual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring
Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
Sunsynk ECCO 5Kw On & Off grid Hybrid solar & wind Inverter & GSL 20.48 kwh kit £5,965 +VAT
£7,081.20 incl. VAT
SPECIAL OFFER - Sunsynk ECCO 5Kw On & Off grid Hybrid solar & wind Inverter & GSL 20.48 kwh kit
#1:SUN-5.0-ECCO-GSL-20.48 Storage Systems - Hybrid Inverter
Sunsynk 5Kw Data Sheet
Sunsynk 5Kw Installation Manual
Sunsynk 5Kw Warranty
Sunsynk 5Kw G99 Certificate
SUNSYNK-ACC-PACKGIV-BAT-ISO-100A
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Product Features:
Dual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring
Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
445W Aiko N-Type ABC, All Black 22.8% efficiency Cell-level partial shade optimisation £87 +VAT
£104.40 incl. VAT
445W Aiko N-Type ABC, Black Hole Series, 54 Cell, All Black Solar Panel
#2: AIK-A-MAH54-445-AB
Aiko 445W Datasheet
Aiko 445W Manual
Aiko 445W MCS Certificate
Please check minimum order quantity prior to ordering as this varies depending on the specific panel.
Minimum order for this panel: 4 panels.
For orders with no minimum please visit our Single Panels page.
Other panels have a minimum order of 3 - 5 panels.
*Collections are not permitted due to health & safety regulations*
Aiko Monocrystaline N-Type ABC - Neostar
AIKO's All-Black 54-Cell Solar Panels embody the pinnacle of modern technology, boasting an impressive efficiency rate of 23.1%. Designed with aesthetics in mind, these panels offer a sophisticated blacked-out appearance and a seamless, bezel-less edge, enhancing the visual appeal of any residential property. Ideal for homeowners seeking top-tier efficiency, AIKO’s panels combine style with performance to meet the highest standards of residential solar energy solutions.
For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market:
Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance
Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc.
Up to 23.6% Efficiency 445W-460W
Cell-level partial shade optimisation
Maximum System Voltage: DC1500V
Panel Rating (450W) Efficiency: 23%
Cable Length: 1.2m
Connector: Staubli MC4 EVO2
Product Warranty: 15 Years
Performance Warranty: 30 Years
Weight: 20.5 kgRated Power: 450 WLength: 1,722 mmWidth: 1,134 mmDepth: 35 mmVMPP: 33.6 VIMPP: 13.25 AIsc: 13.86 AVoc: 40.6 VTemp. Coefficient (Mpp): -0.29 %Clamp position on panel: Long and short sideConnector Type: MC4Efficiency: 22.8 %
Aiko 455W N-Type ABC, Black Frame 23.3% efficiency Cell-level partial shade optimisation £89 +VAT
£106.80 incl. VAT
Aiko 455W N-Type ABC, 54 Cell, Black Frame
#2: AIK-A-MAH54-455-BF
Aiko 445W Datasheet
Aiko 445W Manual
Aiko 445W MCS Certificate
Aiko 445W Warranty
Please check minimum order quantity prior to ordering as this varies depending on the specific panel.
Minimum order for this panel: 4 panels.
For orders with no minimum please visit our Single Panels page.
Other panels have a minimum order of 3 - 5 panels.
*Collections are not permitted due to health & safety regulations*
The AIKO black frame panel features high efficiency as well as beautiful, elegant design that is suited to both residential and commercial buildings.
For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market:
Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance
Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc.
Up to 23.8% Efficiency 450W-465W
Cell-level partial shade optimisation
Maximum Series Voltage: DC1500V
Panel Rating (455W) Efficiency: 23.3%
Cable Length: 1.2m
Connector: MC4 EVO2
Product Warranty: 15 Years
Performance Warranty: 30 Years
Specs:
Weight: 20.5 kg
Rated Power:455 W
Length: 1,722 mm
Width: 1,134 mm
Depth: 30 mm
VMPP: 33.6 V
IMPP:13.55 A
Isc:14.19 A
Voc: 40.6 V
Temp. Coefficient (Mpp): -0.29 %
Connector Type: MC4
Efficiency: 23.3 %
615W Aiko N-Type ABC, 72 Cell 23.3% efficiency 30 yr warranty Cell-level partial shade optimisation £128 + VAT
£153.60 incl. VAT
Aiko 615W N-Type ABC, 72 Cell, Silver Frame
To reserve stock please email: support@itstechnologies.uk
#2: AIK-A-MAH72-615-SF
Aiko 615W Datasheet
Aiko 615W Manual
Aiko 615W MCS Certificate
Please check minimum order quantity prior to ordering as this varies depending on the specific panel.
Minimum order for this panel: 5 panels.
For orders with no minimum please visit our Single Panels page.
Other panels have a minimum order of 3 - 5 panels.
* Please note that due to the size of the solar panel either a fork lift is required on site or the solar panels will need to be hand lifted off by the customer
Aiko Monocrystaline N-type ABC Comet
A commercial panel with a very high efficiency of nearly 24% to give investors faster ROI with the series standard elegant design.
For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market:
Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance
Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc.
Rating: 615W
Efficiency: 23.3%
Cell-level partial shade optimisation
Width: 1,134mm
Height: 2,323mm
Maximum Series Voltage: DC1500V
Cable Length: 1.4m
Connector: MC4 EVO2
Product Warranty: 15 Years
Performance Warranty: 30 Years
Weight: 29 kgRated Power: 615 WMCS Reference: PV0330/173Length: 2,323 mmWidth:1,134 mmDepth:35 mmVMPP:44.98 VIMPP:13.68 AIsc:14.44 AVoc:54.29 VTemp. Coefficient (Mpp):-0.29 %Clamp position on panel:Long and short sideConnector Type:MC4Efficiency:23.3 %
Complete Kit: Sunsynk Lifelynk X 3.6kW all in one Hybrid Inverter with 3.84kwh battery £1,668 +VAT
£2,001.89 incl. VAT
Sunsynk Lifelynk X 3.6kW all in one Hybrid Inverter with 3.84kwh battery
#5: SUN-LIFE3.6X-HYB Storage Systems - Hybrid Inverter
Sunsynk Lifelynk Data Sheet
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
*Collections are not permitted due to health & safety regulations*
The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation. This inverter enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.
This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.
Product Features:
Small and Mighty - An ideal solution for smaller properties, social housing and local government projects
Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit
EPS Function - Includes option for 3.6kw Output for Essential Loads
Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket
Plug and Play - Get up and running quickly
Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind
Technical Specifications:
Maximum Power Output - 3600w
Dimensions - 700.6 x 534.6 x 182.2mm
Weight - 57.4kg
Weight
57.4 kg
Dimensions
54.36 × 18.22 × 70.06 cm
Brand
Sunsynk
Rated Power
3600W
DC Start-up Voltage
150V
Weight
57.4kg
Warranty
5 Years
Max. Charging/Discharging Current
60A Charge, 80A Discharge
Battery Capacity
3.84kWh
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
Sunsynk SUNSYNK L5.3 Wall mounted IP65 battery Inc battery to inverter & battery to battery cable 5.32kWh £1,386+vat
£1,663.69 incl. VAT
Sunsynk Battery SUNSYNK-L5.3
#10: SUNSYNK-L5.3
Sunsynk L5.3 Data Sheet Sunsynk L5.3 Manual
(Compatible with L5.1 and G5.3 models but not BYD 5.32kwh or CATL 5.12kwh)
The SUNSYNK-L5.3 Lithium-ion Phosphate Battery has an IP65 rated enclosure and utilises LiFePO4 technology for enhanced security and performance levels. The battery is particularly suited to application scenarios of high power, limited installation space and long cycle life.
The SUNSYNK-L5.3 incorporates a BMS (Battery Management System) to manage and monitor the cell information, including voltage, current and temperature. Multiple batteries can be connected in parallel to expand the capacity to the required level.
Included:
Battery isolator
Battery to inverter & Battery to battery cable
Wall bracket
TECHNICAL SPECIFICATION
Battery chemistry: LiFePO4
Capacity (Ah): 104
Scalability: Max. 32 pcs in parallel (170.24kWh)
Nominal voltage: 51.2V
Energy: 5.32kWh
Recommended depth of discharge: 90%
Dimensions: 440 x 620 x 135mm (W x H x D)
Weight: 46kg
IP rating: IP65
Communication port: CAN2.0, RS485
SUNSYNK G5.3 Stackable or Wall mounted IP21 battery 5.32kWh, inc battery to inverter & battery to battery cable £1,386 +VAT
£1,663.69 incl. VAT
Sunsynk Battery SUNSYNK-G5.3
#5: SUNSYNK-G5.3
#10: SUNSYNK-G5.3
G5.3 Datasheet
G5.3 Wall Mounted manual
G5.3 Rack Mounted Manual
(Compatible with L5.3 and L5.1 models but not BYD 5.32kwh or CATL 5.12kwh)
Sunsynk’s top-grade 5.32kWh Lithium-Ion Phosphate batteries (4.79kWh usable) have been engineered to the highest standard.
They are capable of up to 90% depth of discharge and scalable with up to 32 units in parallel, allowing for a maximum of 170kWh per inverter. Sunsynk BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward. The battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. This allows the end user to utilise the full potential of our inverter and battery systems.
Included:
Battery isolator
Battery to inverter & Battery to battery cable
Wall bracket
TECHNICAL SPECIFICATION
Battery chemistry: LiFePO4
Capacity (Ah): 104
Scalability: Max. 32 pcs in parallel (170.24kWh)
Nominal voltage: 51.2V
Energy: 5.32kWh
Recommended depth of discharge: 90%
Dimensions: 440 x 620 x 135mm (W x H x D)
Weight: 46kg
IP rating: IP65
Communication port: CAN2.0, RS485
Complete Kit: Sunsynk Lifelynk X 3.6kW all in one Hybrid Inverter with 3.84kwh battery + L5.3 IP65 5.32kwh additional battery £3,129 +VAT
£3,754.21 incl. VAT
solar batterySunsynk Lifelynk X 3.6kW all in one Hybrid Inverter with 3.84kwh + 5.32kwh additional battery
#1: SUN-LIFE3.6X-HYB-5.32
Sunsynk Lifelynk Data Sheet
Kit includes:
1 x SUN-LIFE3.6X-HYB
1 x SUNSYNK-L5.3
1 x SUN-CAB-BATBAT-IP65
Storage Systems - Hybrid Inverter
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
*Collections are not permitted due to health & safety regulations*
The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation. This inverter enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.
This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.
Product Features:
Small and Mighty - An ideal solution for smaller properties, social housing and local government projects
Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit
EPS Function - Includes option for 3.6kw Output for Essential Loads
Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket
Plug and Play - Get up and running quickly
Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind
Technical Specifications:
Maximum Power Output - 3600w
Dimensions - 700.6 x 534.6 x 182.2mm
Weight - 57.4kg
Weight
57.4 kg
Dimensions
54.36 × 18.22 × 70.06 cm
Brand
Sunsynk
Rated Power
3600W
DC Start-up Voltage
150V
Weight
57.4kg
Warranty
5 Years
Max. Charging/Discharging Current
60A Charge, 80A Discharge
Battery Capacity
3.84kWh
Additional Sunsynk L5.3 5.32kwh Sunsynk battery
The SUNSYNK-L5.3 Lithium-ion Phosphate Battery has an IP65 rated enclosure and utilises LiFePO4 technology for enhanced security and performance levels. The battery is particularly suited to application scenarios of high power, limited installation space and long cycle life.
The SUNSYNK-L5.3 incorporates a BMS (Battery Management System) to manage and monitor the cell information, including voltage, current and temperature. Multiple batteries can be connected in parallel to expand the capacity to the required level.
Wall bracket included
TECHNICAL SPECIFICATION
Battery chemistry: LiFePO4
Capacity (Ah): 104
Scalability: Max. 32 pcs in parallel (170.24kWh)
Nominal voltage: 51.2V
Energy: 5.32kWh
Recommended depth of discharge: 90%
Dimensions: 440 x 620 x 135mm (W x H x D)
Weight: 46kg
IP rating: IP65
Communication port: CAN2.0, RS485
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
GivEnergy All In One - 6kW AC charger & 13.5 kWh storage including Gateway £5,176 +VAT
£6,211.63 incl. VAT
GivEnergy All In One - 13.5 kW with Gateway for backup
#2: GIV-AIO-PACKAGE#3: 5128#5: GivEnergy All-In-One 13.5kWh with Gateway
GivEnergy 13.5 KW AIO Datasheet
GivEnergy Gateway Datasheet
GivEnergy Brochure
GivEnergy Installation Manual
GivEnergy G99 Certificate
GivEnergy G100 Certificate
GivEnergy Full Schematics
GivEnergy Welcome Pack
The GivEnergy All in One is a one of a kind home battery and inverter – unrivalled for power and price point. Meanwhile, the Giv-Gateway protects supply and keeps properties running during power cuts.
The GivEnergy All In One AC coupled system has many advantages. With 7.2kW peak power, the charge and discharge rate of these batteries helps better take advantage of agile tariffs. Alongside this, the system is complete with a substantial 13.5kWh useable battery pack and allows for 100% Depth of Discharge. With inbuilt isolator, CT clamp, metering, switchgear, and a gateway requiring no additional distribution board; there's little to fit and minimal wiring.
Above all else, the all in one unit has a fantastic premium look and a good deal of capacity, at a very affordable price. Kit Includes:
GivEnergy All in One
GivEnergy Gateway
With the additional GivEnergy Gateway, the All in One can provide whole house backup in the event of a power failure.
Mulpitple systems in parallel not yet available
The Giv-Gateway provides seamless switching between grid and battery ensuring that your property is always powered. Giv-Gateway also facilitates a connection point for your solar PV system by allowing it to continue to generate energy even without a grid supplyGrid Services ReadyEnergy suppliers and aggregators are offering payments for end users that can reduce their electrical consumption at certain times.Pre-Installed EM115 MeterQuicker and simpler system installation, which reduces the number of individual mounted components needed20ms Switchover TimeUniterrupted supply in the event of a power failure, to ensure all critical loads are stable.Built-In LoRaUses Radio frequency to transmit the Grid meter data back to the inverter, which allows the system to be installed remotely without a cable.
Givenergy 9.5kWh Gen2 Battery suitable for Octopus Agile & Flux £2,634 +VAT
£3,160.80 incl. VAT
GivEnergy 9.5kWh Eco LiFePO4 Battery IP65
#1: GIV-BAT9.5
#3: GivEnergy 9.5kWh LiFePO4 Battery
GivEnergy 9.5kWh Datasheet
GivEnergy 9.5kWh Warranty
GivEnergy Full Schematics
GivEnergy Welcome Pack
Please ensure the correct cable is added to your order. Gen2 to Gen2 is for connecting 9.5kw batteries to 9.5kw batteries only. Gen2 to Gen1 is for connecting 9.5kw battery to any Givenergy inverter/charger
Suitable for charging from Economy 7 such as Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understanding Economy 7
*Collections permitted by pre-arrangement*
To build a complete system please visit our main Givenergy page
Up to 5 batteries can be used with each AC charger/hybrid inverter, multiple charger/inverters can be installed.The next step in GivEnergy's product range, and it's bigger and better than ever. With a capacity of 9.5kWh and an unlimited cycle 12 year warranty, it marks the next step in the ever-popular range.New features include an in-built DC MCB and push fit power connectors - reducing time and complexity of installation.
Features:
Plug & Play functionality
Fully Recyclable at end of life
Remote Firmware upgrades
IP65 Rated
Technical:
Dual BMS system allowing greater control and functionality
Scalable Battery Packs - Up to 5 per inverter in 2019
0.5C-1C charge and discharge rate
Retrofit compatible
157Wh per Kg +/- 5%
Now with 12 year warranty.
GivEnergy 5kW Gen 3 Hybrid Inverter + 9.5kWh Battery Bundle £3,818 +VAT
£4,581.60 incl. VAT
GivEnergy 5kW Gen 3 Hybrid Inverter + 9.5kWh Battery Bundle
#3: 5052#5278
#2 GIV-5.0K-9.5-G3
GivEnergy Full Schematics
GivEnergy Welcome Pack
*Collections are not permitted due to health & safety regulations*
To purchase 5 yr extended warranty please add warranty to your basket
GivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package.The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solutions which allows you to seamlessly integrate battery storage into PV systems.
Suitable for charging from Economy 7 such as Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understanding Economy 7
Kit includes items required specifically for the Gen 3 hybrid:
This Bundle Includes:
1 x GivEnergy Gen 3 5kW Hybrid Inverter
GIV-HY-5.0-G3
1 x GivEnergy 9.5kWh Battery
GIV-BAT9.5
1 x GivEnergy Gem120CT Meter
GIV-GM120CT
1 x GivEnergy Plug to Plug + Grommet for 9.5kwh batteries to G3 Hybrid
GIV-BC-PP-G
1 x Battery Isolator
GIV-BAT-ISO-100A
1 x GIV-PE-KIT-G3
Now with 12 year warranty - on all GivEnergy batteries and inverters.
Bundle Sunsynk ECCO 8Kw On & Off grid Hybrid solar & wind Inverter & GSL 10.24 kwh kit £3,970 +VAT
£4,749.60 incl. VAT
Sunsynk ECCO 8Kw On & Off grid Hybrid solar & wind Inverter & GSL 10.24 kwh kit
#1:SUN-8.0-ECCO-GSL-10.24 Storage Systems - Hybrid Inverter
Sunsynk 8Kw Data Sheet
Sunsynk 8Kw Installation Manual
Sunsynk 8Kw Warranty
Sunsynk 8Kw G99 Certificate
Accessories included:
Comms cable - GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack - GSL-PWRCAB-2M-ORG
2m black & red battery cables - 2 x BATCAB35-1M-PAIR
35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8
Battery isolator - Keto-200
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring
Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
Bundle Sunsynk ECCO 8Kw On & Off grid Hybrid solar & wind Inverter & GSL 20.48 kwh kit £6,698 +VAT
£7,695.60 incl. VAT
Sunsynk ECCO 8Kw On & Off grid Hybrid solar & wind Inverter & GSL 20.48 kwh kit
#1:SUN-8.0-ECCO-GSL-20.48 Storage Systems - Hybrid Inverter
Sunsynk 8Kw Data Sheet
Sunsynk 8Kw Installation Manual
Sunsynk 8Kw Warranty
Sunsynk 8Kw G99 Certificate
Accessories included:
Comms cable - GSL-SUNSYNK-CANBUS-CABLE GSL battery cable pack - GSL-PWRCAB-2M-BLK GSL battery cable pack - GSL-PWRCAB-2M-ORG
2m black & red battery cables - 2 x BATCAB35-1M-PAIR
35mm2 Cable Terminal Lug M8 - Single - 4 x LUG35-8
Battery isolator - Keto-200
Please view our battery storage information page for sizing and selecting the right battery storage system for you.
Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments.
The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.
Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring
Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes
GSL 10.24kwh battery
Product Performance
1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size.
2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority.
3. Compatible to mains voltage or generator power, auto restart while AC is recovering.
4. Users can flexibly match battery capacity, standard battery packages or external batteries.
5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly.
6. Integrated design, Easy transportation and installation.
7. Overload/Over temperature/short circuit protection.
9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.
Product Features
- Safety:
LiFePO4 LFP Battery, stable and safe.
Module, pack, system, triple protection.
- Simple:
Modulat design, single person can carry and install it.
Plug and play, 30 min quick installation.
Space saving: 0.15 sqm foot print.
Dimensions per battery: 621 x 214 x 550
Net weight per battery: 93kg
Max charging current: 100A
Max continuous charging current: 120A
Battery capacity: 200AH
Take complete control of your inverter by using the Sunsynk App.
Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.
Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries
Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection.
Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills.
Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money.
Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.
Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.