Nationwide installations are available across most areas of the UK. £750 deposit refundable to proceed with the installation process. Balance payment due prior to delivery of the system (ignore the date that will show at checkout which is only an estimate) Installation service includes DNO application, MCS & 2yr workmanship warranty. Free delivery included at checkout so VAT isn't charged on delivery. Steps to Proceed following payment of the deposit: Provide your MPAN Number found on your electricity bill Photo's of the space for the battery system with a description of the location Photo's of the consumer unit with description of location of consumer unit in relation to the location for the battery system. Photo's of a current solar inverter set up if relevant.    #5: INSTALLED-FOX-EP5/11-IP65 Storage Systems - Hybrid Inverter FOX ESS EP5 Data Sheet FOX ESS EP11 Data Sheet   Please view our battery storage information page for sizing and selecting the right battery storage system for you. Collections are not permitted due to health & safety regulations Fox ESS collection page for further information and documents Kits with Fox chargers 3.7-6kWh hybrids & EP5/11 Battery Storage IP65 (suitable for outdoor) and with heating element. Selection of size hybrid inverters suitable for charging from the grid and from solar. The EP5 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications.    (EP series are only compatible with the same EP model/size) Features 90% Depth of Discharge Scalable to 4 batteries Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Heating element Warranty 10 years EP5 Specs Weight: 50.5kg Nominal Energy: 5,180Wh Nominal Voltage: 192 V Maximum Charge/ Discharge Current: 27 A EP5 Dimensions: 380 x 625 x 147 (W x H x D) mm EP11 Specs Weight: 100 kg Nominal Energy: 10,360Wh Depth of discharge: 90% Nominal Voltage: 384 V Maximum Charge / Discharge Current: 27 A Recommended Charge Current: 13.5 A Dimensions: 70 x 625 x 147 (w x h x d) mm  

Nationwide installations are available across most areas of the UK. £750 deposit refundable to proceed with the installation process. Balance payment due prior to delivery of the system (ignore the date that will show at checkout which is only an estimate) Installation service includes DNO application, MCS & 2yr workmanship warranty. Free delivery included at checkout so VAT isn't charged on delivery. Steps to Proceed following payment of the deposit: Provide your MPAN Number found on your electricity bill Photo's of the space for the battery system with a description of the location Photo's of the consumer unit with description of location of consumer unit in relation to the location for the battery system. Photo's of a current solar inverter set up if relevant.    #5: INSTALLED-DURACELL-DURA5-IP65 Storage Systems - Hybrid Inverter FOX ESS EP5 Data Sheet FOX ESS EP11 Data Sheet   Please view our battery storage information page for sizing and selecting the right battery storage system for you. Collections are not permitted due to health & safety regulations Fox ESS collection page for further information and documents Kits with Fox chargers 3.7-6kWh hybrids & EP5/11 Battery Storage IP65 (suitable for outdoor) and with heating element. Selection of size hybrid inverters suitable for charging from the grid and from solar. The EP5 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications.    (EP series are only compatible with the same EP model/size) Features 90% Depth of Discharge Scalable to 4 batteries Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Heating element Warranty 10 years EP5 Specs Weight: 50.5kg Nominal Energy: 5,180Wh Nominal Voltage: 192 V Maximum Charge/ Discharge Current: 27 A EP5 Dimensions: 380 x 625 x 147 (W x H x D) mm EP11 Specs Weight: 100 kg Nominal Energy: 10,360Wh Depth of discharge: 90% Nominal Voltage: 384 V Maximum Charge / Discharge Current: 27 A Recommended Charge Current: 13.5 A Dimensions: 70 x 625 x 147 (w x h x d) mm  

Fox ESS EP5 5.18kWh Battery with Heating Element #2: FE-HV-EP5-H Storage Systems - Li-ion Battery Pack FOX ESS EP5 Data Sheet FOX ESS EP5 User Manual FOX Warranty FOX Battery Sizing Guide The EP5 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications. With a FE-JUNBOX-HV, additional batteries can be installed in parallel allowing for a maximum storage capacity of 20.8kWh.   (EP series are only compatible with the same EP model/size) Features 90% Depth of Discharge Scalable to 20.8 kWh Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Warranty 10 years Specs Weight: 50.5kg Nominal Energy: 5,180Wh Nominal Voltage: 192 V Maximum Charge/ Discharge Current: 27 A Dimensions: 380 x 625 x 147 (W x H x D) mm    

Fox ESS EP5 5.18kWh Battery with 10 Year Warranty #2:FE-HV-EP5-10Y Storage Systems - Li-ion Battery Pack FOX EP5 Data Sheet FOX EP5 User Manual FOX Warranty FOX Battery Sizing Guide   *Collections are not permitted due to health & safety regulations* The Fox ESS EP5 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications. With a FE-JUNBOX-HV, additional batteries can be installed in parallel allowing for a maximum storage capacity of 20.8kWh. (EP series are only compatible with the same EP model/size) Features 90% Depth of Discharge Scalable to 20.8 kWh Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Warranty 5 years + 5 year extended warranty Fox ESS EP5 Specs Weight: 50.5kg Nominal Energy: 5,180Wh Voltage: 115 V Continuous Discharge Rate (Normal Use): 5,184 W Maximum Discharge Rate: 5,184 W Surge Discharge Rate (15 seconds): 12,480 W Maximum Charge Rate: 5,184  

Fox ESS EP11 10.36kWh 384V Battery with Heating Element #2: FE-HV-EP11-H Storage Systems - Li-ion Battery Pack FOX ESS EP11 Data Sheet FOX ESS EP11 User Manual FOX ESS EP11 Warranty FOX Battery Sizing Guide The EP11 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications. Additional batteries can be installed in parallel allowing for a maximum storage capacity of 41.6kWh.     Features Battery heating and fire suppression 90% Depth of Discharge Scalable to 41.6 kWh Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Warranty 10 years Specs Weight: 100 kg Nominal Energy: 10,360Wh Depth of discharge: 90% Nominal Voltage: 384 V Maximum Charge / Discharge Current: 27 A Recommended Charge Current: 13.5 A Dimensions: 70 x 625 x 147 (w x h x d) mm    

Fox ESS EP11 10.36kWh 384V BatteryFE-HV-EP11 #2: FE-HV-EP11-10Y Storage Systems - Li-ion Battery Pack FOX EP11 Data Sheet FOX EP11 User Manual FOX Warranty FOX Battery Sizing Guide The EP11 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications. Additional batteries can be installed in parallel allowing for a maximum storage capacity of 41.6kWh. Features 90% Depth of Discharge Scalable to 41.6 kWh Floor or Wall Mounting Compact and easy to install IP65 Rated High voltage and high efficiency Warranty 5 years Specs Weight: 99 kg Nominal Energy: 10,360Wh Depth of discharge: 90% Voltage: 384 V Continuous Discharge Rate (Normal Use): 10,368 W Maximum Discharge Rate (5 minutes): 10,368 W Surge Discharge Rate (15 seconds): 24,960 W Maximum Charge Rate (5 seconds): 10,638 W

Fox Junction Box for paralleling up to 4 EP Batteries (EP5 or EP11) #2: FE-JUNBOX-HV Storage Systems - Accessory *Collections are not permitted due to health & safety regulations* Fox HV Junction Box Data Sheet Fox HV Junction Box User Manual Fox HV Junction Box Quick Install Guide The Fox HV Junction is required when adding multiple Fox EP5 batteries or EP11 batteries. Supports up to 4-way battery parallel connection Scalable up to 40kwh Easy Installation IP65 Protection Level Weight 4,5 kg  

Fox LV52 5.12kWh 48V Battery Module #1: FE-LV52 FE-LV52 Datasheet FE-LV52 User Manual FE-LV52 Installation Guide   Compatible AC coupled charger: Solis 3.0kW 5G RAI Energy Storage AC Coupled inverter (SOL-3.0K-RAI-48ES-5G-AC-V2)Compatible Hybrid inverter battery chargers:Solis 3.0kW Hybrid 5G Inverter (SOL-3K-RHI-48ES-5G-DC)Solis 3.6kW Hybrid 5G Inverter (SOL-3.6K-RHI-48ES-5G-DC) Solis 5.0kW Hybrid 5G Inverter (SOL-5K-RHI-48ES-5G-DC) Solis 6.0kW Hybrid 5G Inverter (SOL-6K-RHI-48ES-5G-DC) *Collections are not permitted due to health & safety regulations* The LV52 are high-performance, scalable, low-voltage battery storage modules. Rated life span of more than 6,000 cycles. Storage capacity is expandable to 42.56Wh. 95% charge/discharge efficiency. Easy, plug and play installation. 90% Depth of Discharge Wide Temperature Tolerance Easy Installation 6000 Life Cycles CAN/RS485 Communication Low Voltage Please note: The standard warranty on the product is 5 years but it could be extended to 10 years in total after successful registration on the Fox website below. https://www.fox-ess.com/warranty-registration-2/   Weight: 54 kgBattery Type: Lithium IonNominal Energy: 5120 WhDepth of discharge: 90.00 %Voltage: VContinuous Discharge Rate (Normal Use): 5120 WMaximum Discharge Rate (5 Minutes): 5120 WSurge Discharge Rate (15 Seconds): 7500 WMaximum Charge Rate (5 Minutes): 5120 W   The LV52 and the LV54 ARE compatible with each other. The LV52 is not compatible with the LV5200 When installing 2-4 batteries, two combiner box's (FE-JUNBOX-LV) will be required. Please note: The CAN cable currently shipped with the Fox ESS LV54 battery is made-up at one end only (the battery end). The Installer will need to make up the cable at the inverter end.    

Fox Combiner Box for paralleling up to 4 LV Batteries (LV52 or LV54) #1: FE-JUNBOX-LV - Energy Meter Fox ESS Junction Box for the LV52 and LV54. The Combiner Box Requires 2x Units to Work.Parallel from 2 to 4 LV52 or LV54 batteries in one system.REQUIRES 2 FE-JUNBOX-LV TO WORK.

HV2600 1M DC Extension Cable #1: FE-HV2600-EXT-1M Storage Systems - Accessory Required when installing 5+ HV2600 batteries to allow 2 stacks 1m extension cable for Fox HV2600 battery

Fox AC 3.7kW Charger Inverter  #1: FE-AC1-3.7 Storage Systems - Charger-Inverter Fox 3.7kW Data Sheet Fox 3.7kW Inverter User Manual Fox 3.7kw Inverter Warranty Fox 3.7kw Inverter G100 Certificate *Collections are not permitted due to health & safety regulations* The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Compatible with Fox HV2600 & Cube batteries IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% BMS unit required 2 x HV2600 batteries minimum CT Clamp included  

Fox AC 5.0kW Charger Inverter #1: FE-AC1-5.0 Storage Systems - Charger-Inverter Fox 5.0kW Data Sheet Fox 5.0kW Inverter User Manual Fox 5.0kw Inverter Warranty Fox 5.0kw Inverter G100 Certificate *Collections are not permitted due to health & safety regulations* The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Compatible with Fox HV2600 & Cube batteries IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% BMS unit required 2 x HV2600 batteries minimum CT Clamp included

Fox H1 3.0kW Hybrid Inverter G2 #2: FE-H1-3.0-G2 Storage Systems - Hybrid Inverter Fox H1 3.0kW Datasheet Fox H1 3.0kW Manual Fox H1 3.0kW Installer Guide Fox H1 3.0kW G100 Certification Fox Battery Sizing Guide *Collections are not permitted due to health & safety regulations* Features: Easy Install High Voltage IP65 Rated Remote Monitoring Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% Easy to expand battery capacity Compatible with: ECS2900 (1 Master Minimum, up to 6 Slaves Maximum) ECS4100 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) ECS4300 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) ECS4800 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) HV2600 (1 BMS + 2 HV2600 Minimum, up to 7 Maximum) Included: CT Clamps WiFi stick Still Required: a second CT if there's another generator set (i.e PV, wind or other). a meter between inverter and incoming power connection point IF distance is more than 30m apart. Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers Specs: Weight: 22 kgRated Power: 3,000 WMin PPT Voltage: 80 VMax PPT Voltage: 550 VDC Startup Voltage: 75 VDC Shutdown Voltage: 601 VMax Input Voltage: 600 VMax DC Power (5 minutes): 4,500 WMax AC Power (5 Minutes): 3,000 WSurge AC Power (1 Second: 3,300 WMax DC Current: 32 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 95.7 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: YesWarranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Fox H1 3.7kW Hybrid Inverter 1PH G2 #2: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter Fox H1 3.7kW Datasheet Fox H1 3.7kW Manual Fox H1 3.7kW Installer Guide Fox H1 3.7kW G100 Certification Fox Battery Sizing Guide *Collections are not permitted due to health & safety regulations* Features: Easy Install High Voltage IP65 Rated Remote Monitoring Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% With this single phase Hybrid/AC Inverter you can easily expand your system with up to seven batteries in series, with a maximum storage capacity of 33.24kWh. Compatible with all Cube & EP5/11 batteries Included: CT Clamps WiFi stick Still Required: a second CT if there's another generator set (i.e PV, wind or other). a meter between inverter and incoming power connection point IF distance is more than 30m apart. Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers Specs: Weight: 22 kgRated Power: 3,680 WMin PPT Voltage: 80 VMax PPT Voltage: 550 VDC Startup Voltage: 75 VDC Shutdown Voltage: 600 VMax Input Voltage: 600 VMax DC Power (5 minutes): 5,500 WMax AC Power (5 Minutes): 3,680 WSurge AC Power (1 Second: 4,400 WMax DC Current: 32 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 95.7 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: YesWarranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox H1 5.0kW Hybrid Inverter G2 #2: FE-H1-5.0-G2 Storage Systems - Hybrid Inverter Fox H1 5.0kW Datasheet Fox H1 5.0kW Manual Fox H1 5.0kW Installer Guide Fox H1 5.0kW G100 Certification Fox Battery Sizing Guide *Collections are not permitted due to health & safety regulations* Features: Easy Install High Voltage IP65 Rated Remote Monitoring Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% With this single phase Hybrid/AC Inverter you can easily expand your system with up to seven batteries in series, with a maximum storage capacity of 33.24kWh. Compatible with all Cube & EP5/11 batteries Included: CT Clamps WiFi stick Still Required: a second CT if there's another generator set (i.e PV, wind or other). a meter between inverter and incoming power connection point IF distance is more than 30m apart. Specs: Weight: 22 kgRated Power: 5,000 WMin PPT Voltage: 80 VMax PPT Voltage: 550 VDC Startup Voltage: 75 VDC Shutdown Voltage: 601 VMax Input Voltage: 600 VMax DC Power (5 minutes): 7,500 WMax AC Power (5 Minutes): 5,000 WSurge AC Power (1 Second: 5,500 WMax DC Current: 32 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 97 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: YesWarranty: 5 yearsRemember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using HV2600 1M DC Extension Cable  

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide *Collections are not permitted due to health & safety regulations* Features: Easy Install High Voltage IP65 Rated Remote Monitoring Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% With this single phase Hybrid/AC Inverter you can easily expand your system with up to seven batteries in series, with a maximum storage capacity of 33.24kWh. Compatible with all Cube & EP5/11 batteries Included: CT Clamps WiFi stick Still Required: a second CT if there's another generator set (i.e PV, wind or other). a meter between inverter and incoming power connection point IF distance is more than 30m apart. Specs: Weight: 23 kgRated Power: 6,000 WMin PPT Voltage: 80 VMax PPT Voltage: 550 VDC Startup Voltage: 75 VDC Shutdown Voltage: 601 VMax Input Voltage: 600 VMax DC Power (5 minutes): 9,000 WMax AC Power (5 Minutes): 6,000 WSurge AC Power (1 Second: 6,600 WMax DC Current: 32 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 97 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: NoWarranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.