Enphase Micro Inverters (22)

Enphase Q Cable Sealing Caps #1: EN-Q-SEAL Enphase Q Cable Sealing Caps (1 Item)Q cable sealing caps (female) One needed to cover each unused connector on the cabling. Single item only. Only available to purchase together with Microinverters.

Enphase MI frame mount 35 mm #1: EN-EFM-35MM Makes Enphase Microinverters Compatible with Railless and Ballasted Systems Bolts microinverters directly to the module frame, eliminating design challenges with both residential and commercial systems Comes in two sizes that fit the majority of modules Faster Installations Bolt microinverters to module frames on the ground, then carry the complete module up to the roof for rapid, drop-in installation Simple, two-piece bracket attaches in three easy steps More Affordable Installing with the Enphase Frame Mount requires fewer parts than other frame mount solutions, saving you material costs Reduce labor costs with faster, more efficient installations Reliable The Enphase Frame Mount is made of anodized aluminum for a strong, rust-free bracket Engineered specifically for use with Enphase Microinverters

Enphase MI Frame Mount 40mm #1: EN-EFM-40MM Makes Enphase Microinverters Compatible with Railless and Ballasted Systems Bolts microinverters directly to the module frame, eliminating design challenges with both residential and commercial systems Comes in two sizes that fit the majority of modules Faster Installations Bolt microinverters to module frames on the ground, then carry the complete module up to the roof for rapid, drop-in installation Simple, two-piece bracket attaches in three easy steps More Affordable Installing with the Enphase Frame Mount requires fewer parts than other frame mount solutions, saving you material costs Reduce labor costs with faster, more efficient installations Reliable The Enphase Frame Mount is made of anodized aluminum for a strong, rust-free bracket Engineered specifically for use with Enphase MicroinvertersOnly available to purchase together with Microinverters.

Q Cable Disconnect Tool (1 Item)#1: EN-Q-DISC Tools - Accessories#2: Enphase Q-cable disconnect tool Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount.Orders only with other enphase components

Enphase Field-wireable connectors (Female) single#1: EN-Q-CONN-R-1F Cables - Connectors #2: Enphase Female Connector Minimum order: 4 Units Field-Wireable Connectors Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types

Enphase Field-wireable connectors (Male) single#1: EN-Q-CONN-R-1M Cables - Connectors #2: Enphase Male Connector Minimum order: 4 Units Field-Wireable Connectors Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types

Enphase replacement DC adaptor to MC4 connector #1: EN-Q-DCC-2-INT   Enphase DC adaptor to MC4 (max voltage 100V DC).  Single part.  The DC adaptor is already included with the IQ7 inverter range. This partno is the adaptor on its own in case of needing to replace a damaged or lost one.    Only available to purchase together with Microinverters.

Enphase Q cable branch terminator cap for waterproofing the end of each branch of microinverters.#1: EN-Q-TERM-R  Minimum order: 4 Units One required per branch.  

Enphase Q Cable 1ph 1m Portrait#1: EN-Q-25-10-1 Cables - Single Phase AC Cable#2: Enphase Q Cable ***1m Portrait*** Minimum order: 4 Units Enphase Q Cable 1ph 1.3m Portrait (price per connector)

Enphase Q Cable 3ph 1m Portrait#1: EN-Q-25-10-3P-1 Enphase Q Cable 3ph 1m Portrait (price per connector) Only available to purchase together with Microinverters.

Enphase Q Cable 1ph 2m Landscape #1: EN-Q-25-17-1#2: Enphase Q Cable ***2m Landscape*** Minimum order: 4 Units Enphase Q Cable for connecting microinverters together in a branch or string. One is required per microinverter being installed. You can also extend between arrays or roofs by utilising more of this cable, plus a sealing cap for every unused trunk.This is the 2m landscape version, for when your panels are mounted in landscape.

Enphase Q Cable 3ph 2.0m Landscape #1: EN-Q-25-17-3P-1   Enphase Q Cable 3ph 2.0m Landscape 60-cell (price per connector) Only available to purchase together with Microinverters.

100A Split-core current transformer (CT for Envoy-S Metered ) #1: CT-100-SPLIT-ROW Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered   Only available to purchase together with Microinverters. Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Enphase Q-Relay for IQ7/IQ7+ Three Phase #1: Q-RELAY-1P-INT In Enphase installations, the single-phase Q Relay (network system relay controller) acts as a galvanic disconnection device. It is designed for single phase use and has built in contactors. During specified grid abnormalities, the Q Relay disconnects the Enphase Microinverters from the AC grid, and when the voltages return to normal and the grid frequency is in the acceptable range, the Q Relay reconnects the microinverters to the AC grid. The Q Relay has built in current sensing that can detect DC current injection required by VDE V 0126-1-1 requirements. The Q Relay works together with the Envoy-S to meet the need to break both line and neutral per grid requirements. See full installation instructions for the Enphase Envoy-S and/or Enphase Microinverters at: enphase.com/support. It is best practice to install the Q Relay when installing the Envoy-S and before commissioning the system. The Q relay is IP-20 rated. You must mount it in an environmentally protected enclosure.   Only available to purchase together with Microinverters.

Enphase IQ7+ 60 and 72 cell Microinverter 230 & 400VAC#1:EN-IQ7PLUS-72-M-INT Inverters - Micro Inverter Units  Enphase IQ7 Data Sheet  Enhpase IQ7 User Manual  Enphase IQ7 Warranty  Enphase IQ7 G99 Certification Automatic discount for 14+: £6/unit  Automatic discount for 22+: £8/unit  *Collections are not permitted due to health & safety regulations* Rating: 290WPhases: 1Enphase IQ 7+ MicroinverterThe high-powered smart grid-ready Enphase IQ 7+ Micro™ achieve the highest system efficiency. Part of the Enphase IQ System, the IQ 7+ integrate seamlessly with the Enphase Envoy-S™, and the Enphase Enlighten™ monitoring and analysis software. The IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty. Easy to Install- Lightweight and simple- Faster installation with improved, lighter two-wire cabling- The IQ7 inverters each come with a DC module and integrated MC4 connector Productive and Reliable- Optimized for high powered 60-cell and 72-cell modules- More than a million hours of testing- Class II double-insulated enclosure Smart Grid Ready- Complies with advanced grid support, voltage and frequency ride-through requirements- Remotely updates to respond to changing grid requirements- Configurable for varying grid profiles Please note, in order to comply with G98/G99 regulations, from 27th of April 2019 EVERY Enphase microinverter system requires Envoy device to commission the system AND it needs to be left on site permanently.   Weight: 1.05 kgRated Power: 290 WMin PPT Voltage: 16 VMax PPT Voltage: 60 VDC Startup Voltage: 22 VDC Shutdown Voltage: 16 VMax Input Voltage: 60 VMax DC Power: 440 WMax AC Power (5 Minutes): 290 WSurge AC Power (1 Second): 290 WMax DC Current: 14 AMax DC Inputs: 1Has DC Fuses: 0Connector: MC4Included Connectors: 1Euro Efficiency: 96.5 %Transformer: HFMPPT Quantity : 1Has Integrated DC Switch: NoWarranty: 25 years

Enphase IQ7 Plus 60 and 72 cell MC4 integrated Three Phase Microinverter 230 & 400VAC #1: EN-IQ7PLUS-72-M-INT-3PH Inverters - Micro Inverter Units  Enphase IQ7 Data Sheet  Enhpase IQ7 User Manual  Enphase IQ7 Declaration of Conformity Automatic discount for 14+: £6/unit  Automatic discount for 22+: £8/unit  *Collections are not permitted due to health & safety regulations* Rating: 440WPhases: 3Product features High performance version of the seventh-generation IQ platform Smart-Grid ready Easily integrated with the Gateway-S™ and Enphase™ monitoring and analysis software Easy to install thanks to lightweight design and improved two-wire cabling Double insulated housing, protection class II Modular design allows simple expansion of system as required Ultra reliable – system keeps working even if a single panel/microinverter fails or panel slips into shade Mobile app allows enhanced control and monitoring possibilities Product specification Commonly used module pairings: 295W - 460W + Module compatibility: 60-cell/120 half-cell and 72-cell/144 half-cell PV modules Peak output power: 366 VA Operating range: 18V - 58V IP Rating: IP67   Weight: 1.05 kgRated Power: 440 WMin PPT Voltage: 27 VMax PPT Voltage: 45 VDC Startup Voltage: 16 VDC Shutdown Voltage: 0 VMax Input Voltage: 60 VMax DC Power: 400 WMax AC Power (5 Minutes): 295 WSurge AC Power (1 Second): 290 WMax DC Current: 12 AMax DC Inputs: 1Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 96.5 %Transformer: HFMPPT Quantity : 1Has Integrated DC Switch: NoWarranty: 25 years