Newest Products

Backup Box B1 for 3ph System #1: HUA-BACKUP-BOX-B1 Backup Box Data Sheet Backup Box Manual Backup Box Warranty Huawei Backup Box B1 – Three-Phase Systems Part No: HUA-BACKUP-BOX-B1Category: Energy Storage System Accessory The Huawei Backup Box B1 enables automatic detection and seamless switchover between grid-connected and backup operation, providing reliable backup power for three-phase residential PV and battery storage systems. Designed to work alongside compatible Huawei hybrid inverters, the Backup Box intelligently manages the system’s operating state to ensure continuity of supply during grid outages. How It Works Normal operation: The inverter operates in a grid-tied state Grid outage detected: The Backup Box automatically signals the inverter to switch to off-grid (backup) mode, supplying power to designated backup loads Grid restoration: The system automatically transitions back to grid-tied operation once supply is restored This automated process ensures uninterrupted power to critical loads without manual intervention. Key Benefits Automatic grid failure detection and recovery Seamless transition between grid-tied and off-grid operation Reliable backup power for selected circuits Designed specifically for three-phase residential systems Fully integrated with Huawei inverter architecture

EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management #3: 7613   EcoFlow 1ph Gateway Backup Box EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management Upgrade your home energy system with the EcoFlow Single Phase Gateway, a high-capacity power management solution designed for seamless whole-home backup. Built to handle up to 100A mains supply, the gateway intelligently manages multiple energy inputs and integrates directly with your main distribution board, enabling a clean, efficient and installer-friendly setup. With an ultra-fast 0 ms switchover time, the EcoFlow Single Phase Gateway ensures uninterrupted power during grid outages, protecting sensitive appliances and maintaining comfort without disruption. Its robust design, wide operating temperature range and silent natural convection cooling make it suitable for demanding residential environments. Key Benefits & Performance • True whole-home backup with support for up to 100A mains• Instant 0 ms switchover for uninterrupted power supply• Designed for direct integration with the main electrical panel• Silent operation with natural convection cooling• Long service life backed by a 15-year manufacturer warranty Connectivity & System Integration • Ethernet, RS485 and CAN communication interfaces• Digital input (DI) and digital output (DO) support• Enables intelligent energy monitoring and system coordination Electrical Specifications • Nominal AC voltage: 220 / 230 / 240 V• Nominal AC current: 100 A• Nominal AC power: 22 / 23 / 24 kW Environmental & Mechanical Specifications • Protection rating: IP54• Operating temperature range: -30°C to +55°C• Cooling method: Natural convection• Noise emission: <30 dB Physical Dimensions & Warranty • Dimensions: 465 × 380 × 160 mm• Weight: 15 kg• Warranty: 15 years This EcoFlow Single Phase Gateway is an ideal choice for homeowners seeking a reliable, future-ready energy management solution that delivers seamless backup power, intelligent control and long-term reliability.

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 9 meters total height. Blades are 8 meters high and 1.7 meters in diameter. They come with a generator rated at 10,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 8 meters total height. Blades are 7 meters high and 1.7 meters in diameter. They come with a generator rated at 5,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 5 meters total height. Blades are 4 meters high and 1.7 meters in diameter. They come with a generator rated at 2,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 3 meters total height. Blades are 2 meters high and 1.7 meters in diameter. They come with a generator rated at 1,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   5M Tulip Turbine Datasheet 5M Tulip Turbine Installation Guide   FT 6M Flower Tulip Wind Turbine Commercial-Scale Wind Power for High-Demand Sites Our largest and most powerful Flower Tulip turbine, featuring a 5-metre blade height, is engineered to deliver serious commercial-scale wind generation. Designed for high-energy users, the FT 6M is ideal for projects where performance, reliability, and long-term ROI are critical. This turbine is purpose-built to power large commercial and infrastructure assets, including: Shopping centres & retail parks Data centres Schools & universities Municipal buildings Warehouses & logistics hubs Airports Farms & agri-industrial sites And more High Output, Exceptional Value If you’re looking for up to 5 kW per turbine — and significantly more when deployed in a bouquet — this is the solution. The FT 6M is our most cost-effective Flower Tulip when measured by output per unit, making it ideal for scalable commercial installations. Standard colour is white, providing a clean, architectural finish suitable for both urban and industrial environments. Installation Options The FT 6M is designed for: Ground-mounted installation Very strong roof structures (subject to structural and civil engineering approval) Its robust construction and braking systems make it suitable for exposed and demanding sites. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Ultra-low cut-in wind speed for generation in light winds Bouquet Effect technology, delivering substantial output increases in clustered installations Designed for commercial, municipal, and infrastructure-scale energy systems Quiet operation with an iconic, architectural form Technical Specifications General Model: FT 6M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 5 kW (reached at ≈11.5 m/s / 25.7 mph) Design Life: 20 years (annual inspection required) Dimensions & Weight Blade Height: 5.0 m (16.4 ft) Total Height: 6.0 m (19.7 ft) Turbine Diameter: 2.5 m (8.2 ft) Total Weight: ≈1,000 kg (2,205 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled via inverter or charge controller Electrical braking system Mechanical and manual braking included as required Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Output (Single Turbine): ≈5.39 kW at 12 m/s (26.8 mph) Bouquet Performance: 25%–228% output increase per turbine when correctly oriented Example – Bouquet of 5: ≈12.5 kW per turbine ≈62.5 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 230 VAC / 3-phase / 60 Hz 110 VAC / 3-phase / 50 Hz Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   3M Tulip Turbine Datasheet 3M Tulip Turbine Installation Guide   3-Metre Flower Tulip Wind Turbine Our 3-Metre Flower Tulip Turbines deliver a robust, high-performance wind energy solution in a compact, visually striking design. Suitable for homes, commercial buildings, and community installations, these turbines can be installed either at ground level or on structurally suitable flat roofs. Thanks to Flower Turbines’ patented Bouquet Effect, performance increases as turbines are installed together—meaning each turbine produces more energy when operating as part of a cluster. The standard finish is white, blending seamlessly into both urban and architectural environments. Designed for Optimal System Sizing The 3-metre turbine has been engineered so that five units pair optimally with a 5 kW inverter. This ensures: Balanced system design Maximum usable energy output Efficient inverter utilisation This makes the 3M Tulip an excellent choice for modular, scalable wind installations. Strong-Roof & Ground Installation Ready With its 3-metre blade height and reinforced design, the 3M Tulip is specifically suited for stronger roof structures where additional load capacity is available. It is equally effective when installed at ground level using a metal base fixed to concrete foundations. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Ultra-low cut-in wind speed for generation in light wind conditions Bouquet Effect technology delivering significantly higher output in clustered installations Quiet operation with an architectural, visually appealing form Suitable for grid-tied or hybrid energy systems Technical Specifications General Model: FT 3M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 1,000 W (reached at ≈11 m/s / 25 mph) Design Life: 40 years (annual inspection required) Dimensions & Weight Blade Height: 3.0 m (9.84 ft) Turbine Diameter (both blades attached): 1.8 m (5.91 ft) Total Height: 4.07 m (13.35 ft) Total Weight: ≈400 kg (882 lbs) Ground Mount: Metal base for secure attachment to concrete foundations Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by charge controller (braking begins at ~12 m/s) Mechanical brake supplied Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Production (Single Turbine): ≈1,400 W at 12 m/s (27 mph) Bouquet Performance (Example – 5 Turbines): ≈3 kW per turbine ≈15 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 240 VAC / single-phase / 60 Hz 230 VAC / single-phase / 50 Hz Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 10 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   2M Tulip Turbine Datasheet 2M Tulip Turbine Installation Guide   FT 2M-Lite Flower Turbine The FT 2M-Lite Flower Turbine is a visually striking, medium-scale vertical-axis wind turbine designed for commercial, micro-grid, and hybrid solar-wind applications. Standing just over 3 metres (≈9.8 ft) tall, it delivers reliable wind generation in compact spaces where traditional turbines are unsuitable. Manufactured in the United States, the FT 2M-Lite combines architectural design with high performance and long-term durability. It can be installed: On structurally suitable flat roofs (subject to civil/structural engineer approval) On the ground using a concrete foundation and pole mount A battery is not included, allowing flexibility to integrate with existing or bespoke energy storage systems. Ideal Applications Supplementary wind generation alongside commercial or residential solar PV Hybrid solar-wind systems for improved year-round generation Micro-grids and off-grid projects Sites where wind complements solar output during low-light or winter conditions Thanks to Flower Turbines’ patented Bouquet Effect, installing multiple turbines together significantly increases total output—meaning the more turbines deployed, the greater the collective performance. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Extremely low cut-in wind speed for generation in light winds Bouquet Effect technology delivering substantial performance gains in clustered installations Quiet operation with an architectural, visually appealing design Suitable for grid-tied or off-grid systems Technical Specifications General Model: FT 2M-Lite Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 500 W (reached at ≈11 m/s / 25 mph) Design Life: 40 years (annual inspection required) Dimensions & Weight Blade Height: 2.0 m (6.56 ft) Blade Diameter: 1.18 m (3.85 ft) Total Height: 3.008 m (9.87 ft) Total Weight: ≈227 kg (501 lbs) Ground Pole Mount: Diameter: 0.1 m (0.33 ft) Length: 2.44 m (8 ft) Weight: 30 kg (66 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled electronically via inverter/charge controller Braking: Electrical brake system Additional mechanical brake Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Production (Single Turbine): ≈622 W at 12 m/s (27 mph) Bouquet Effect Performance: 25%–228% output increase per turbine when correctly oriented Example – Bouquet of 5: ≈1.147 kW per turbine ≈5.7 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 240 VAC / 1-phase / 60 Hz 230 VAC / 1-phase / 50 Hz Materials & Environmental Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered under their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 10 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   1M Tulip Turbine Datasheet 1M Tulip Turbine Installation Guide   1.15 m Flower Tulip Wind Turbine The 1.15 m Flower Tulip Turbine is a compact vertical-axis wind turbine designed for both off-grid and grid-connected applications. Standing at approximately 1.5 m high, it integrates advanced electronics to charge 12 V, 24 V, or 48 V battery systems, or to connect to the grid when deployed in larger multi-turbine “bouquet” configurations. Mounted on a fixed pole, the Flower Tulip is ideal for: Off-grid applications such as outdoor lighting, signage, and small displays Hybrid wind-and-solar systems, where it supplements solar generation during low-light and winter conditions Scalable bouquet installations, delivering significantly higher output through the patented Bouquet Effect The turbine is supplied as standard in white and is engineered for long-term durability in demanding environments. Key Features Vertical Axis Wind Turbine (VAWT) design for omni-directional wind capture Ultra-low cut-in wind speed for generation in light winds Bouquet Effect technology increases output when turbines are grouped and correctly oriented Suitable for off-grid, hybrid, or grid-connected systems Quiet operation with a visually appealing, architectural form Technical Specifications General Model: FT 1.15M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 100 W (reached at 14.5 m/s / 32.4 mph) Design Life: 40 years (annual inspection required) Warranty: 5 years on Flower Turbines components Third-party components covered by their respective manufacturers Dimensions & Weight Turbine Diameter / Width: 0.55 m (1.79 ft) Blade Height: 1.15 m (3.77 ft) Total Height: 1.4 m (4.58 ft) Weight: ≈20 kg (44.1 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter or charge controller Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Output (Single Turbine): ≈62.2 W at 12 m/s (27 mph) Bouquet Effect Gain: ≈25% additional output per turbine when correctly oriented Example: 4-turbine bouquet → ~100% output increase (double power) 5-turbine bouquet → ≈144.7 W per turbine Total output: ≈723.5 W at 12 m/s Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated within generator Battery Charging: 12 V / 24 V / 48 V systems Grid-Tied Output: 110 V or 220 V (dependent on country and inverter selection) Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F)

Fox ESS Battery Storage System Installation in Woodford Berkeley Example Installation – Not for Purchase (Please note: This is an example of one of our professional installations and is not available for direct purchase.) Overview of the Installation This advanced battery storage system installation in Woodford Berkeley demonstrates how homeowners can maximize energy efficiency and save on electricity costs. The system offers projected annual savings of approximately £1,800, delivering a payback period of just 4 years by charging from Octopus Energy’s cheap night-time electricity rates. Key Benefits Reduce energy bills by storing cheap electricity overnight Maximize return on investment with a short payback period Support renewable energy usage and lower your carbon footprint System Specifications Hybrid Inverter Fox ESS 10.5kW Hybrid Inverter – Efficient power conversion and smart energy management Battery Storage 2 x FOX ESS EP12 11.52kWh Lithium Batteries – High-capacity storage for reliable energy availability Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.

Sunsynk 8.8kW Hybrid Inverter with 31.92kWh Battery Storage – Real Installation Example (Please note: This is an example of one of our installations. This system is not available for free, so please do not purchase.) Why Choose This System? Our customer in Wadhurst needed a reliable energy solution with around 30kWh+ battery storage and a powerful hybrid inverter for maximum efficiency. The Sunsynk 8kW hybrid inverter combined with 3 x W10.6 Sunsynk lithium batteries provided the perfect balance of performance, scalability, and cost-effectiveness. Key Benefits Potential Savings: £2,500 per year Payback Period: Just under 4 years Optimised Charging: Works with Octopus Energy cheap night rates for additional savings Scalable Storage: 3 x 10.64kWh batteries for future expansion System Specification Inverter Model: Sunsynk 8.8kW Hybrid Inverter Features: Intelligent energy management, remote monitoring, and grid-tied capability Batteries Quantity: 3 x Sunsynk W10.6 Capacity: Each battery offers 10.64kWh, giving a total of 31.92kWh Type: Lithium-ion for long lifespan and efficiency Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.

Fox ESS Battery Storage System Installation in Kettering Example Installation – Not for Purchase (Please note: This is an example of one of our professional installations and is not available for direct purchase.) Overview of the Installation This advanced battery storage system installation in Hersham demonstrates how homeowners can maximize energy efficiency and save on electricity costs. The system offers projected annual savings of approximately £2,800, delivering a payback period of just 4 years by charging from Octopus Energy’s cheap night-time electricity rates. Key Benefits Reduce energy bills by storing cheap electricity overnight Maximize return on investment with a short payback period Support renewable energy usage and lower your carbon footprint System Specifications Hybrid Inverter Fox ESS 6kW Hybrid Inverter – Efficient power conversion and smart energy management Battery Storage 3 x FOX ESS EP12 11.52kWh Lithium Batteries – High-capacity storage for reliable energy availability Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.

Example Battery Storage Installation – Solis & Dyness System (This is an example of one of our installations. This system is not available for free, so please do not purchase.) Our customer’s projected saving is around £570 per year, delivering a payback period of just under 7 years when charging from Octopus cheap night-time electricity. This demonstrates how battery storage can significantly cut household energy bills and increase self-sufficiency. Why Choose a Battery Storage System Like This? By pairing a Solis 6kW AC charger with Dyness 5.12kWh batteries, homeowners can optimise their energy usage, reduce grid reliance, and maximise savings. Charging during off-peak tariffs allows stored energy to be used during the day, lowering overall electricity costs. System Specification Inverter/Charger: Solis 6kW AC charger Battery Storage: 2 x Dyness 5.12kWh lithium batteries Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.

Example Installation – High-Capacity Solar Battery Storage (This is an example of one of our installations. This system is not available for free, so please do not purchase.) Our customers are projected to save around £3,000 per year, achieving a payback in just under 3 years by charging their system from Octopus cheap night-time electricity. Why Choose This Battery Storage Setup? This example highlights the benefits of pairing a Sunsynk 8.8kW hybrid with Dyness high-capacity batteries, providing reliable energy storage, reduced grid dependence, and smarter energy management for residential properties. System Specification Hybrid Inverter/Charger: Sunsynk 8.8kW  Battery Storage: 4 x Dyness Powerbox G210.24kWh batteries   For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Fox ESS Battery Storage – EP11 10.36kWh  Our customer in Watford had an existing Fox ESS battery storage system with 1 x EP11 and required to increase his storage capacity to 4 x EP11s. ITS was happy to provide the installation of the additional batteries. Key Benefits Maximise Savings: Charge from low-cost electricity tariffs to reduce energy bills Fast Payback: Example system demonstrates a payback period of under 5½ years High Capacity Storage: 10.24kWh EP11 battery for reliable home backup Smart Energy Management: Optimises charging and discharging for cost efficiency Scalable System: Add additional batteries in the future as energy needs grow Ideal for UK Homes: Suitable for residential properties across the UK Why Choose Fox ESS Efficient Hybrid Inverter: Charges from solar and grid seamlessly Reliable Backup Power: Keeps essential home loads running during outages Future-Proof Design: Expandable storage and compatibility with smart tariffs like Octopus Agile   Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.  

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus Hybrid Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Solis 8/10kW Hybrid PLUS Inverter with Dyness 10.24kWh G2 Battery   The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk 3ph Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty   8/10/12kW 3ph Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery options The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Interactive display with RS485 & Wi-Fi 5-Year Warranty Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability.  Sunsynk 10 / 12kW 1ph Data Sheet Sunsynk 16kW 1ph Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty   10/12/16kW 1ph Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery options The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Interactive display with RS485 & Wi-Fi 5-Year Warranty Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk 3.6Kw Data Sheet Sunsynk 5Kw Data Sheet Sunsynk 8Kw Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Kit includes the selected Sunsynk hybrid inverter either 3.6, 5 or 8kW Sunsynk collection page for further information and documents Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Hybrid Inverter Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Kit includes the selected Solis Hybrid inverter either 3.6, 5 or 6kW Solis 5G Hybrid Inverter with Dyness 10.24kWh G2 Battery The Solis 5G Hybrid Inverter is a next-generation energy management solution. Paired with the Dyness10.24kWh G2 Battery, this system offers reliable, flexible, and future-proof energy storage for UK homes and businesses. Solis 5G Hybrid Inverter Features Fanless IP65 design for quiet, durable operation High charging and discharging efficiency for maximum energy savings Multiple operating modes to maximise self-consumption and minimise grid reliance Intelligent BMS (Battery Management System) for safe, efficient performance 24-hour real-time energy management with smart controls Remote monitoring and upgrades via app and online portal Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

To view our full range of installed battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis S6 AC Charger Data Sheet   Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Solis S6 AC Charger with Dyness 10.24kWh Battery The Solis S6 AC Charger is a high-performance energy storage solution designed for UK homes and businesses. Combined with the Dyness 10.24kWh Powerwall Battery, it enables efficient solar energy storage, smart battery management, and reliable backup power, helping you reduce electricity costs and optimise self-consumption. Solis S6 AC Charger Features 125A / 6kW max charge/discharge rating for fast energy cycling Supports 6 different battery charging and discharging modes Real-time battery monitoring for optimal performance Remote upgrades for system improvements without onsite visits Peak shaving functionality in ‘self-use’ and ‘generator’ modes Low power standby mode minimises overall system energy usage Advanced battery protection to extend battery life Specifications: Rated Power: 5,000W Weight: 24.5kg Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

Fox EQ2900 2.88kWh HV Battery (Slave) #2: FE-HV-EQS-2900  Fox EQ2900 Datasheet Fox EQS2900 Manual Fox EQS2900 Warranty   Fox EQ High Voltage Battery – Slave Module (EQS2900) The Fox EQS2900 is a high-performance high-voltage battery slave module, designed to expand the capacity of the Fox EQ modular battery system. Built for flexibility, reliability, and fast installation, the EQ range is ideal for residential and light commercial energy storage applications where scalable capacity and long-term performance are essential. The modular, plug-and-play design allows additional battery modules to be added in series, enabling systems to grow as energy demands increase — all while maintaining efficient high-voltage operation and seamless inverter communication. Key Features & Benefits 2.88 kWh usable capacity per module Scalable system design – expand up to 20.16 kWh High voltage architecture for improved system efficiency 90% depth of discharge (DoD) for maximum usable energy Wide operating temperature tolerance for reliable year-round performance CAN communication for stable inverter integration Fast plug-and-play installation, reducing install time and labour costs System Configuration Requirements Minimum configuration: 2 modules required (1 × Master + 1 × Slave) Maximum configuration: Up to 7 modules per stack (1 × Master + 6 × Slaves) Slave modules cannot operate independently and must be paired with a Fox EQ Master module. Technical Specifications Weight: 33 kg Battery Type: Lithium-ion Nominal Energy: 2.88 kWh (2880 Wh) Depth of Discharge (DoD): 90% Nominal Voltage: 52 V Continuous Discharge Power (Normal Operation): 1.44 kW Maximum Discharge Power (5 minutes): 2.88 kW Surge Discharge Power (15 seconds): 3.0 kW Maximum Charge Power (5 minutes): 2.88 kW

The package includes the electrical work required to in the property to connect an EPS Gateway for full house back-up Please note: This product is only available to purchase together with a professionally installed system. An EPS Gateway setup provides a reliable and safe way to power your home or business during a grid outage. Installed at the main power supply point, the automatic changeover (transfer) switch allows you to disconnect from the public utility grid and connect to an alternative backup power source such as solar battery storage or a generator. How an EPS Gateway setup Works Normal operation – The switch connects your property to the main utility grid, supplying electricity as usual. During a power cut – The automatic switchover will switch to backup mode, safely isolating your wiring from the grid to prevent back-feeding into utility lines. Connecting to backup power – The switch redirects your circuits to a backup source, such as a solar inverter with battery storage or a generator. Inverter response – If using a solar inverter, it automatically detects grid failure and begins supplying stored energy from your solar batteries. Returning to mains power – Once the grid is restored, you manually switch back to reconnect with the utility supply.