Products (533)

1.1Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.1Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   3 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   3 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 2400W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1000W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 30V – 80V Maximum mains AC charging current: 25A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable  Size: 32 x 22.5 x 8.8 cm Weight: 5.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS

1.095Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.1Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.1Kw 12V/24V solar charging kit includes:   3 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg

1.46Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.46Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   4 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   4 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS

1.46kw 24v complete off-grid solar power system with 4 x 365w solar panels, 3kw hybrid inverter and 4.8kw battery storage   This 1.46Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   4 x 365W monocrystalline solar panels each with 1m solar cable and MC4 connectors Iconica Hybrid 3000W 48V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   4 x 365W Solar panels:   The two high efficiency, monocrystalline 365W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   3000W 24V Iconica Hybrid Inverter:   3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources. 2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.  Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 80A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable  Size: 44 x 30 x 11.5 cm Weight: 9 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability) Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS

1.46Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.46Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.46Kw 12V/24V solar charging kit includes:   4 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS Charge controller specifications: The most advanced MPPT technology to ensure high efficiency of your solar system Fully automated operation and auto 12V/24V charging voltage selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390 (12V) / 780W (24V) Comprehensive electronic protection Self-consumption: less than 12mA Working temperature: -25C to +50C Size: 22.8 x 16.4 x 5.5 cm Weight: 1.26 kg Multiple mounting holes for ease of installation   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg

1.825Kw 24v complete off-grid solar power system with 2 x 365w solar panels, 2.4kw hybrid inverter and 2 x 100ah batteries   This 1.825Kw 24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small/medium household or office appliances such as LED lighting, TV, radio, computer, printer or a fridge. This may vary significantly according to the location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including two monocrystalline solar panels and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.   Kit includes:   5 x 365W monocrystalline solar panels. Canadian Solar or similar Iconica Hybrid 2400W 24V pure sine wave inverter 2 x 100AH 12V AGM deep cycle Photonic Universe leisure batteries 120A circuit breaker or fuse A pair of 5m 4mm2 solar extension cables with MC4 connectors A pair of 1m 25mm2 tinned copper battery cables Battery linking cable Loose ring terminals   5 x 365W Solar panels:   The two high efficiency, monocrystalline 340W solar panels included in the kit feature innovative 5 busbar solar cells, a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.   2 x  AGM Batteries: The AGM deep-cycle batteries are non-spillable, completely sealed and maintenance free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Additional items: This kit also includes 1m positive and 1m negative 25mm2 tinned copper battery cables with loose ring terminals for connecting the inverter to the batteries, a 120A fuse or circuit breaker for use between the hybrid inverter and the batteries, 5m solar extension cable with MC4 connectors to connect to the existing 1m of solar cable fitted to the solar panels and battery linking cable to connect the batteries together.      Hybrid inverter specifications:   Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Battery specifications (per battery):   Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS

1.825Kw 12v / 24v complete solar battery charging kit with 3000W 12V hybrid inverter charger & 500AH battery storage   This premium quality 1.82Kw 12V/24V Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for household appliances or industrial equipment in areas without access to or without stable mains electricity. This kit can provide power to small household or office appliances such as a TV, radio, lights, computer, laptop, printer or a low power kettle. This may vary significantly according to location and season.   This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a 5-busbar monocrystalline solar panel with German solar cells and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a solar charge controller, pure sine wave inverter and a smart mains battery charger in one single unit.   This 1.825Kw 12V/24V solar charging kit includes:   5 x High quality 365W Canadian Solar monocrystalline solar panel or similar 3000W 24V Iconica Hybrid Inverter Set of 4 corner plastic mounting brackets for bonding to the roof Set of 4 side mounting brackets for bonding to the roof Waterproof double entry cable gland 5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel 3m of 10.0mm dual core battery cable with 40A fuse and ring terminals   365W monocrystalline solar panel:   The high efficiency, waterproof 365W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.    3000W 24V Iconica Hybrid Inverter: This inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit: 1. 3000W 24V Pure sine wave inverter: Converts DC current from the solar panels into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of the battery bank from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional features: This model also features an Uninterrupted Power Supply (UPS), and can accept input from the solar panels, mains power/ a generator and the battery bank - either from a single or combination of input sources.   Benefits of 2V battery connection:   This battery bank features 2V batteries, offering important advantages over battery banks made up of 12V batteries. These include:   Significantly improved longevity: These 2V batteries are connected in series, as opposed to 12V battery banks which require a complex combination of series and parallel connections. By connecting exclusively in series, each 2V battery is charged and discharged at an even rate. Thanks to these stable and balanced charging cycles, this battery bank has a considerably longer service life than any bank consisting of 12V batteries. Deeper discharge capability: The thicker metal plates inside these 2V batteries allow more energy to be drawn from the bank than if it were comprised of 12V batteries.   Suitable applications:   The long service life and improved depth of discharge of this battery bank make it ideal for applications requiring constant, reliable and powerful energy supply. Such applications include, but are not limited to:   - Large power systems for motorhomes, caravans and boats- Solar, wind and hybrid energy systems- Household off-grid power systems - Emergency or back-up UPS systems- Energy storage for telecommunications or networking equipment- Power stations   Benefits of AGM batteries:   This battery bank features 6 x AGM (Absorbed Glass Mat) batteries. In AGM batteries, all electrolyte is absorbed into a special sponge made of glass fibre. Important benefits of AGM batteries include:   - Maintenance free: No need for liquid or electrolyte top up. - Extremely safe: Non-spillable and completely sealed, with protective covering of the terminals.- Long service life: Longer-lasting than standard wet-cell batteries due to less degradation and corrosion inside the battery.- Low self-discharge rate: AGM batteries are less prone to sulphation and hold charge for longer than flooded batteries.- Highly resilient: Good resistance to shock and vibration.   Solar panel specifications (subject to availability Canadian Solar 365W High Power Mono PERC HiKU Rating: 365W Efficiency: 19.7% Width: 1,048mm Height: 1,765mm HiKu CS3L-MS Series CS3L-365MS   Hybrid inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W / 3000VA Surge power: 6000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V Maximum solar charging current: 60A MPPT operating voltage range: 30V – 115V Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with a PC connection cable and  Terminals for mains power connection Size: 44 x 30 x 10 cm Weight: 9.5 kg   Mounting accessory specifications: Material: plastic Colour: white Cable diameter for the cable gland: 3-7mm Size: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Combined weight: 2.7kg

10 X Solar Panel complete PV kit with choice of panels - LEVEL 2 Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00 For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements  All kits are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.   Solar PV kit includes everything required for a complete installation:   Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

10 X Solar Panel complete PV kit with choice of panels - LEVEL 3 Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00 For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements All kits are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.   Solar PV kit includes everything required for a complete installation:   Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

10 X Solar Panel system complete grid tie PV kit with choice of panels - LEVEL 1   Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00  For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements All solar panel systems are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.    Solar PV kit includes everything required for a complete installation:   Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

10 X Solar Panel system complete grid tie PV kit with choice of panels - LEVEL 4   Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00 For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements All kits are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.   Solar PV kit includes everything required for a complete installation:   Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

10 X Solar Panel system complete grid tie PV kit with choice of panels - LEVEL 5   Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00  For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements All kits are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.   Solar PV kit includes everything required for a complete installation:  Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

10 X Solar Panel system complete grid tie PV kit with choice of panels - LEVEL 6   Delivery cost calculated at checkout UK delivery only, next day for orders received by 15.00  For bespoke quotes please specify: number of panels, make of panel, inverter, layout & roof type as well as any other specific requirements All kits are designed bespoke on our solar design software. Details of the roof type & layout are required upon order as well as selected panels. Unusual designs maybe subject to additional charge.   Solar PV kit includes everything required for a complete installation: Choice of solar panels within the price bracket of the kit level selected.   Solar Inverter: standard Growatt or Solis, optional upgrade to Fronius, SolarEdge or SMA Mounting: standard Renusol in portrait. For landscape , flat roof, in-roof, ground mount please request a quote Electrics:  Cable, MC4 connectors, AC/DC isolators, generation meter Kit levels include any of the solar panels on our website within the following pricing categories based on ex-VAT prices:    Level 1 £66-£75 Level 2 £76-£85 Level 3 £86-£95 Level 4 £96-£105 Level 5 £106-£115 Level 6 £116-£125   Upon ordering please provide the roof type, and layout for the correct mounting equipment to be supplied.

Solar Edge P401 Optimizer 60/72 cells UK orders – next day delivery, 13.30 cut off International orders – typically 3-4 business days delivery. For EU orders please contact us for zero rated VAT, outside EU orders are automatically zero rated. *Collections are not permitted due to health & safety regulations* We have a large range of stock available that's not all available online. Please request a quote for specific products you are looking for that you don't see online or for volume discounts.  Part No: P401-MC4 Inverters - Optimisers Second generation optimisers from SolarEdge, pioneers of optimiser technology.  In addition to the benefits of previous versions of the optimsers such as added energy, flexible design, module level monitoring and safety, the P Series range includes features such as: Optimised for high-power modules Faster, simpler Installation requiring just a single screw Compliance with VDE-AR-E 2100-712 Fire Safety standard SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel.  Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal.  Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down. This optimiser is ideal for getting the most out of high powered 60 or 72 cell modules. 

100 x SolarEdge P404 Optimizer 60/72 cells   VAT deducted at checkout for orders outside EU   Global delivery cost – calculated at checkoutUK delivery time – next day, 14.30 cut offGlobal delivery time – approximately 2-5 business days   Part No: P404-MC4 Inverters - Optimisers   The P404-MC4 allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string and is ideally suited to standard 60 and 72 cell modules. This increased flexibility will allow smaller installations to be optimised for maximum energy output.   Second generation optimisers from SolarEdge, pioneers of optimiser technology.  In addition to the benefits of previous versions of the optimsers such as added energy, flexible design, module level monitoring and safety, the P Series range includes features including:   Optimised for high-power modules Faster, simpler Installation requiring just a single screw Compliance with VDE-AR-E 2100-712 Fire Safety standard   SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel.  Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal.  Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down.

100 X SolarEdge P405 Optimizer 60/72/96 cells   VAT deducted at checkout for orders outside EU   Global delivery cost – calculated at checkoutUK delivery time – next day, 14.30 cut offGlobal delivery time – approximately 2-5 business days   Part No: P405-MC4 Inverters - Optimisers   The P405-MC4 allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string and is ideally suited to larger, higher voltage modules up to 125V DC such as the newest 96 cells. This increased flexibility will allow smaller installations to be optimised for maximum energy output.   Second generation optimisers from SolarEdge, pioneers of optimiser technology.  In addition to the benefits of previous versions of the optimsers such as added energy, flexible design, module level monitoring and safety, the P Series range includes features including:   Optimised for high-power modules - up to 125V Voc Faster, simpler Installation requiring just a single screw Compliance with VDE-AR-E 2100-712 Fire Safety standard   SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel.  Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal.  Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down.Part No: P405-MC4 Inverters - Optimisers   The P405-MC4 allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string and is ideally suited to larger, higher voltage modules up to 125V DC such as the newest 96 cells. This increased flexibility will allow smaller installations to be optimised for maximum energy output.