Tesla Powerwall 3 - fully integrated home battery system with a 13.5 kWh

Tesla Powerwall 3 – Fully Integrated Solar & Home Battery System #4: TESLA-1707000-31-J Tesla Powerwall 3 Data Sheet  Tesla Powerwall 3 Installation Manual Tesla Powerwall Warranty Tesla Powerwall 3 Quick Guide Expansion Multi Unit Installation Tesla Powerwall 3 Quick Guide Required Additional Parts and Tools Tesla Powerwall 3 Install System Shutdown Switch The Tesla Powerwall 3 is an all-in-one solar-plus-storage solution, delivering 13.5 kWh usable capacity, up to 11.04 kW continuous AC output, and a built-in 20 kW DC solar inverter. Designed for UK homes seeking lower energy bills, reduced grid dependence, and seamless whole-home backup, Powerwall 3 stores energy from solar or the grid and manages it effortlessly through the Tesla App. Key Benefits of Tesla Powerwall 3 All-in-One Solar + Storage Powerwall 3 integrates battery storage and solar generation in one IP55-rated enclosure—no external inverter or combiner box required. Whole-Home Backup With up to 11.04 kW AC output and the ability to start heavy loads up to 185 A LRA, Powerwall 3 supports heat pumps, electric showers, ovens, and other demanding appliances during outages. Maximised Energy Efficiency 89% solar-to-battery-to-home/grid efficiency 97.5% direct solar-to-home/grid efficiencyThis ensures more of your generated energy is used where you need it. Engineered for UK Weather Powerwall 3 delivers reliable performance across all climates: Operating range: –20 °C to 50 °C Battery & electronics: IP67 rated Wiring compartment: IP55 rated Suitable for wall or floor mounting Scalable for Any Home Size Modular Storage & Power Scale your system as energy needs grow: Up to 4 Powerwall 3 units Up to 3 Expansion Modules Maximum system output: 44 kW AC Maximum total storage: 94.5 kWh Built-In Safety & Smart Connectivity Advanced Protection AFCI Isolation Monitor Interrupter Rapid Shutdown ±0.5% AC metering accuracy Connected Control Wi-Fi, Ethernet & LTE communication Full system visibility via the Tesla App Remote firmware updates and diagnostics Technical Specifications Electrical Performance Nominal grid voltage: 230 VAC (single-phase) Continuous AC output: 11.04 kW (48 A @ 230 VAC) Load start capability: 185 A LRA (ideal for heat pumps) Max solar input: 20 kW DC (60–550 V), 3 MPPTs Typical operating noise: < 50 dB(A) at 1 m Efficiency Round-trip efficiency: 89% Solar-to-home/grid efficiency: 97.5% Installation Made Simple The Powerwall 3 arrives as a 130 kg pre-wired cabinet (1105 × 609 × 193 mm) for fast installation.Just anchor, connect conductors, scan the QR code, and commission. Using the Tesla Installer Portal, the system automatically handles: Firmware updates System metering Adaptive load control Grid-approval documentation This reduces installation time, minimises service visits, and enhances customer satisfaction.

Tesla Powerwall 3 Expansion – Add 13.5 kWh Capacity to Any Powerwall 3 System #4: TESLA-1807000-20-B Tesla Powerwall 3 Expansion Data Sheet Tesla Powerwall 3 Expansion Mounting Configurations  Tesla Powerwall 3 Installation Manual Tesla Powerwall Warranty Tesla Powerwall 3 Quick Guide Expansion Multi Unit Installation Tesla Powerwall 3 Quick Guide Required Additional Parts and Tools Tesla Powerwall 3 Install System Shutdown Switch The Tesla Powerwall 3 Expansion is the fastest and simplest way to increase storage capacity on an existing Powerwall 3 installation. Each expansion unit adds 13.5 kWh of usable energy without requiring additional inverters, breakers, design revisions, or complex commissioning steps. Installers simply connect the parallel harness, mount the cabinet, and the system automatically synchronises—no firmware flashing or recalculation needed. Effortless Capacity Scaling Plug-and-Play Integration Designed to extend any Powerwall 3 setup, the expansion module instantly syncs with the base battery for seamless operation. Scalable Architecture Add up to 3 expansion batteries to a single Powerwall 3 Expand total storage to up to 54 kWhIdeal for homes with rising energy needs or small-commercial applications. Engineered for Reliable UK Installation Indoor & Outdoor Rated The Powerwall 3 Expansion uses a robust IP67 / NEMA 3R enclosure engineered to withstand: Operating temperatures from –20 °C to 50 °C Up to 100% humidityPerfect for installation in plant rooms, meter cupboards, garages, and external walls throughout the UK. Slim, Space-Efficient Design Cabinet size: 1105 × 609 × 168 mm Can be stacked behind the primary Powerwall 3 or mounted alongside it Floor or wall mounting supported Wall mounting requires a glass door enclosure Rapid, Installer-Friendly Setup Pre-Terminated Parallel Harness Tesla’s pre-wired harness enables fast connection with minimal tools or wiring complexity. Auto-Recognition & Balancing The Tesla QR-code commissioning wizard: Detects serial numbers automatically Balances pack voltages Syncs expansion units with the existing Powerwall 3 systemAll within minutes. Unified Tesla Ecosystem All monitoring, firmware updates, alerts and performance data remain within the Tesla App, reducing support calls and ensuring a smooth customer experience. Technical Specifications Battery Performance Nominal energy per unit: 13.5 kWh Weight: 118.5 kg System compatibility: Tesla Powerwall 3 only Certifications Fully compliant with international safety and performance standards: UL 1973 UL 9540 Pollution Degree 3Trusted by insurers and UK DNOs. Mounting Options Floor mount (standard) Wall mount (requires glass door enclosure)

Tesla Backup Gateway 2 Bundle – Essential Control & Protection for Powerwall Systems 4: TESLA-1152100-13-J Note: This component cannot be purchased separately. It is only supplied with a Tesla Powerwall battery. Tesla Backup Gateway 2 Datasheet Tesla Gateway 2 Box Content Tesla Powerwall 3 Installation Manual Tesla Powerwall 3 Quick Guide Expansion Multi Unit Installation Tesla Powerwall 3 Quick Guide Required Additional Parts and Tools Tesla Powerwall 3 Install System Shutdown Switch The Tesla Backup Gateway 2 Bundle provides ultra-fast islanding, smart metering and full system monitoring for all Tesla Powerwall installations. Compact, IP55-rated and designed for rapid setup, the Gateway manages grid interaction, enables seamless backup power, and supports advanced load control for UK homes and businesses. Critical System Control for Powerwall Installations Sub-50 ms Backup Transition Installed between the grid supply and the Powerwall, the Backup Gateway 2 detects grid loss in less than 50 milliseconds, instantly switching the property to battery backup and ensuring uninterrupted power. Smart Metering & Advanced Monitoring The Gateway provides: Real-time site metering Solar and load monitoring Remote diagnostics and system visibility through the Tesla App This ensures optimal performance and fast troubleshooting without site visits. Compact, Installer-Ready Design Built for UK Installers Encased in a 584 × 380 × 127 mm IP55-rated enclosure, the Gateway ships: Pre-wired DIN-rail ready Compatible with installers’ own breakers At just 11.4 kg, it is lightweight and easy to mount in meter cupboards, plant rooms, or utility areas. Scalable System Architecture Supports Multi-Battery Installations A single Backup Gateway 2 can coordinate: Up to 4 AC-coupled Powerwall units Up to 7 batteries in total when used within larger configurations Ideal for larger residential and small-commercial setups. Compatible With Third-Party PV The Gateway enables the integration of: Third-party solar inverters AC-coupled PV systems This allows retrofit projects or hybrid PV architectures to function seamlessly with the Powerwall ecosystem. Key Installer Benefits Fast Commissioning Tesla’s commissioning wizard and QR-code setup streamline installation, cutting time on site and reducing callbacks. Reliable Backup Control The Gateway ensures battery backup availability and manages transitions automatically, enhancing customer satisfaction and reducing warranty risks.

Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection #2: TES-WALLCONNECTOR-G3-PACK EV Charging - EV Charging Package   Tesla Datasheet Tesla Manual   Tesla Gen 3 Wall Connector – Smart EV Charging for Home and Business The Tesla Gen 3 Wall Connector is a versatile and convenient EV charging solution for both Tesla and non-Tesla electric vehicles. Its lightweight and compact design allows for indoor or outdoor mounting, making it ideal for houses, apartments, workplaces, and hospitality properties. Key Features Compatible with any Type 2 charge port for maximum flexibility Wi-Fi connectivity for over-the-air firmware updates Schedule, manage, and track charging via the Tesla app Up to 71 km of range per hour for fast, efficient charging Supports up to 22 kW with three-phase electrical systems Power sharing to support multiple Wall Connectors on one circuit Compatible with single or three-phase grids Tesla charge port opening directly from the connector 7.3 m cable length for flexible installation Included Components Single Phase Monitoring and Protection Device with Terminals Warranty Residential / personal use: 48 months Commercial use: 12 months Why Choose the Tesla Gen 3 Wall Connector? The Tesla Gen 3 Wall Connector provides fast, reliable, and smart charging for your electric vehicle, whether at home or on commercial premises. With its smart features, Wi-Fi updates, and flexible installation options, it ensures a convenient, safe, and future-proof charging experience for all Type 2 EVs. Order now from ITS Technologies – the UK’s trusted supplier for Tesla and EV charging solutions.

Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered #2: S-WALLCONNECTOR-G3 EV Charging - EV Charger Tesla Datasheet Tesla Manual *Collections are not permitted due to health & safety regulations* Installer accreditation is required from Tesla to purchase this item. Tesla Gen 3 Wall Connector   Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months