Best Selling Products

Sunsynk HV 5.12kWh Battery Unit #20: SUN-HV-5.12 #2:SUN-HV-5.12-BATT  High Voltage Data Sheet   High Voltage Installer Manual  Sunsynk 5.12kWh Single Battery Unit For Sunsynk HV-Series    To view our full range of Sunsynk products visit our main Sunsynk page here 5.12 kWh High-Performance Battery Storage Designed for residential and small commercial solar energy systems, this 5.12 kWh battery offers reliable, scalable energy storage with impressive discharge and charge capabilities. Ideal for maximizing self-consumption, reducing energy bills, and providing backup power when needed. Key Features Nominal Energy: 5,120 Wh Depth of Discharge (DoD): 100% for maximum usable energy Voltage: 51 V Continuous Discharge Rate (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 5,120 W Maximum Charge Rate (5 Minutes): 5,120 W Weight: 44 kg High Efficiency: Optimized for solar self-consumption and hybrid inverter compatibility Modular & Scalable: Stackable units for expanded capacity as energy needs grow Benefits Supports full daily energy cycles with high DoD Robust design for reliable indoor or protected outdoor installation Enables backup power for critical loads during outages Compatible with a wide range of hybrid inverters    

450W JA Solar N-type Bifacial Double Glass All Black solar panel  #2: JAM54D-41-450-LB-TS-AB-MC4  Panels - Double Glass Bifacial JA Solar 450W Datasheet JA Solar 450W Manual JA Solar 450W Extended Product Warranty Minimum order for this panel: 4 panels. For orders with no minimum please visit our Single Panels page. Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. 450W JA Solar N-Type Bifacial Double Glass All Black Solar Panel The JA Solar 450W N-Type Bifacial Double Glass All Black Panel is engineered for maximum energy output, durability, and aesthetic appeal. Using advanced MBB N-type solar cells in a half-cell configuration, this module delivers higher efficiency, lower degradation, and better performance under weak light conditions. Perfect for residential and commercial installations, this bifacial panel optimises power generation while maintaining a sleek, all-black finish. Key Advantages Superior Energy Yield and Efficiency Rated Power: 450W with 22.5% efficiency N-Type technology reduces light-induced degradation (LID) Enhanced weak illumination response ensures consistent output even in cloudy or shaded conditions Optimised temperature coefficient for reliable performance in high temperatures Long-Term Reliability Bifacial double glass design improves durability and resistance to micro-cracks Product Warranty: 25 years Linear Power Output Warranty: 30 years Designed to withstand long-term environmental stress for residential or commercial rooftops Specifications Weight: 22 kg Dimensions: 1,762 × 1,134 × 30 mm VMPP: 32.82 V IMPP: 13.71 A Isc: 14.48 A Voc: 39.3 V Temp. Coefficient (Mpp): -0.3 % Clamp Position: Long and short side Connector Type: Round Post Pallet Size: Oversized Features Advanced JA Solar Technology Latest MBB N-type half-cell configuration Better LCOE (Levelised Cost of Energy) for improved return on investment Elegant all-black design integrates seamlessly with roof aesthetics   Ideal Applications Residential rooftops seeking high efficiency, bifacial solar technology Commercial solar installations where reliability and long-term energy yield are critical Systems requiring low LID and superior weak light performance  

EcoFlow PowerInsight Home Energy Manager  EcoFlow Brochure 1ph  EcoFlow DC Datasheet 1ph  EcoFlow User Manual 1ph  EcoFlow Installation Manual 1ph EcoFlow PowerInsight – Home Energy Management System Monitor Your Home Energy and EcoFlow Storage The EcoFlow PowerInsight is a smart home energy manager designed to help you track energy usage and monitor your EcoFlow home energy storage system. Gain real-time insights into your energy consumption, optimise usage, and maximise the efficiency of your renewable energy setup. Key Features of EcoFlow PowerInsight ✅ Energy Management Made Easy Track and manage the energy usage of your home and your EcoFlow energy storage system from a single device. ✅ Compact & Lightweight Dimensions: 1120mm x 930mm x 110mm Weight: 0.622 kgDesigned to fit seamlessly into your home setup without taking up unnecessary space. ✅ Complete Installation Kit Includes everything you need for a quick and secure setup: PowerInsight unit Wall bracket (114.3mm x 144.78mm) 2m USB-C to USB-C power cable Four anchors and screws Why Choose EcoFlow PowerInsight? Monitor your EcoFlow energy storage in real time Optimise home energy usage and reduce waste Compact design for easy installation anywhere in your home Comes with a complete kit for hassle-free setup Technical Specifications Dimensions: 1120mm x 930mm x 110mm Weight: 0.622 kg Included Accessories: Wall bracket, 2m USB-C power cable, anchors and screws Compatibility: Works with all EcoFlow home energy storage systems Frequently Asked Questions (FAQs) What does the EcoFlow PowerInsight do? It monitors both your home energy usage and the performance of your EcoFlow home energy storage system, giving you real-time insights. Is it easy to install? Yes. The PowerInsight comes with a complete installation kit, including a wall bracket, screws, anchors, and a USB-C cable. Can I use it with any EcoFlow energy storage system? Yes. The PowerInsight is compatible with all EcoFlow home energy storage systems. Buy EcoFlow PowerInsight in the UK Order your EcoFlow PowerInsight Home Energy Manager from ITS Technologies today. Benefit from fast UK delivery, competitive pricing, and expert support for all your home energy management needs.

Dyness Power Box Pro 10.24kWh Lithium Battery IP65 90% D.O.D #4: Dyness-PB-Pro Dyness 10.24kWh Power Box Datasheet Dyness Compatibility List To view complete Dyness full range please visit our Dyness main page Battery to inverter cables included. For multiple batteries the battery to inverter cables will need to be wired through a busbar such as the Victron Lynx Distributor Dyness Powerbox Pro 10kWh – High-Capacity LFP Home Battery Reliable Energy Storage for Homes and Off-Grid Systems The Dyness Powerbox Pro 10kWh is a high-capacity, low-voltage lithium iron phosphate (LFP) battery designed for superior safety, long lifespan, and an optimised user experience. Ideal for residential and off-grid energy systems, this IP65-rated battery can be installed indoors or outdoors, offering flexible wall-mounted or floor-standing options. Key Features of Dyness Powerbox Pro ✅ High-Capacity & Scalable Single unit: 10kWh Supports up to 5 units in parallel to meet larger household energy demands ✅ Deep-Cycle LFP Technology Enhanced safety and stability compared to traditional lithium-ion batteries Long lifespan for reliable, long-term energy storage ✅ Flexible Installation Options IP65-rated for indoor or outdoor use Wall-mounted or floor-standing for convenient placement ✅ Wide Compatibility Works with most major inverter brands Compatible with hybrid and off-grid systems ✅ App Monitoring & Remote Management Real-time monitoring of battery status Remote upgrades available for optimised performance Technical Specifications Battery Type: Lithium Iron Phosphate (LFP) Capacity: 10kWh per unit Voltage: Low voltage, deep-cycle design Dimensions: 555 x 210 x 928 mm Weight: 103 kg Recommended Charge/Discharge Rate: 0.5C Mounting Options: Wall-mounted or floor-standing Protection Rating: IP65 (indoor/outdoor) Parallel Capability: Up to 5 units Why Choose the Dyness Powerbox Pro? High-capacity energy storage for homes and off-grid setups Flexible installation options for indoor or outdoor use Advanced safety and long lifespan with LFP technology Scalable solution to meet increasing household energy needs Smart monitoring via app for easy management Frequently Asked Questions (FAQs) Can the Dyness Powerbox Pro be used outdoors? Yes, it is IP65-rated, making it suitable for both indoor and outdoor installations. How many batteries can be connected in parallel? Up to 5 units can be connected to increase total energy capacity for larger households. Is the Dyness Powerbox Pro compatible with my inverter? Yes, it is widely compatible with major inverter brands and supports both hybrid and off-grid systems. Can I monitor the battery remotely? Yes, the Powerbox Pro supports real-time monitoring and remote upgrades via the Dyness app. Buy Dyness Powerbox Pro 10kWh in the UK Order your Dyness Powerbox Pro from ITS Technologies today for fast UK delivery, competitive pricing, and expert technical support. Future-proof your home energy system with high-capacity, scalable, and reliable battery storage.        

150W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System #21: 150W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System 150W Installation Manual  To view our full range of folding solar panels visit our main page here 150W 12V Folding Solar Charging Kit – Camper, Caravan & Boat Power your 12V battery systems on the go with the 150W 12V Folding Solar Charging Kit. Designed for camping, caravanning, boating, and mobile 12V applications, this portable, fully waterproof kit delivers reliable solar energy in all weather conditions while protecting your battery from overcharge. Key Features Advanced Solar Charge Controller IP67 waterproof controller integrated on the back for all-weather protection. Supports multiple battery types with adjustable charging parameters. Compatible with MT50 remote meter (requires RS485 to RJ45 extension) for real-time monitoring. Portable & Durable Design Lightweight and compact for travel, camping, or marine use. Protective foam-lined case prevents damage to panels and controller. Adjustable folding stand maximises sunlight capture for optimal power output. High-Efficiency Solar Panels Monocrystalline panels for superior energy generation. Fully waterproof and foldable for easy transport and setup. Overcharge protection ensures safe battery use. Kit Contents Two 75W folding solar panels (150W total) 10A waterproof solar charge controller Adjustable aluminium stand, handle, and secure latches 5m cable with battery plug and fuse Battery crocodile clips for easy connection Protective storage case Installation manual Technical Specifications Electrical Data Peak Power: 150W Maximum Power Voltage (Vmp): 17.5V Maximum Power Current (Imp): 8.32A (2 × 4.16A) Open Circuit Voltage (Voc): 21.6V Short Circuit Current (Isc): 9.0A (2 × 4.5A) Power Tolerance: ±3% Mechanical Data Weight: 15 kg Dimensions (folded): 51 × 101 × 7 cm Ideal For UK Outdoor Adventures This 150W 12V Folding Solar Charging Kit is perfect for: Campers, caravans, and motorhomes needing portable solar power Boats and marine applications with 12V battery systems Safe, waterproof, and reliable outdoor energy generation

120W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System #21: 120W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System 120W Installation Manual To view our full range of folding solar panels visit our main page here 120W 12V Folding Solar Charging Kit – Portable, Waterproof & Efficient The 120W 12V Folding Solar Charging Kit is a premium, all-weather solar solution designed for campers, caravans, boats, and other 12V battery systems. Equipped with high-efficiency monocrystalline solar panels and a genuine IP67 waterproof solar charge controller, this kit delivers reliable portable solar power. Its compact, foldable design and protective case make it perfect for outdoor adventures, travel, and off-grid applications. Why Choose the 120W Folding Solar Charging Kit? Durable & Weatherproof Design Fully waterproof, including the integrated solar charge controller. Protective case with foam layer prevents accidental damage during transport or storage. High efficiency even in low light conditions, providing consistent solar energy output. Portable & Easy to Install Lightweight (12.8 kg) and foldable for effortless transport and storage. Adjustable aluminium stand ensures maximum sunlight exposure for optimal charging. Comprehensive kit includes all essential accessories for quick setup. Key Features Peak Power: 120W Voltage: 12V Maximum Power Voltage (Vmp): 17.5V Maximum Power Current (Imp): 6.86A (2 × 3.43A) Open Circuit Voltage (Voc): 21.6V Short Circuit Current (Isc): 7.4A (2 × 3.7A) Power Tolerance: ±3% Dimensions (Folded): 51 × 77 × 7 cm Weight: 12.8 kg Warranty: 1 year Included Accessories Two 60W folding solar panels 10A waterproof solar charge controller Adjustable aluminium stand with handle and latches 5m cable with battery plug and fuse Battery crocodile clips for easy connection Protective storage case Installation manual Ideal Applications Mobile solar power – campers, caravans, motorhomes, boats Portable off-grid charging – outdoor adventures, travel, and temporary setups Flexible energy solution – quick deployment for any 12V battery system ✅ The 120W 12V Folding Solar Charging Kit offers efficient, portable, and fully waterproof solar power, ideal for UK adventurers, boaters, and off-grid energy users.

100W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System #21: 100W 12V Folding Solar Charging Kit for Camper, Caravan, Boat or any other 12V System 100W Installation Manual  To view our full range of folding solar panels visit our main page here 100W 12V Folding Solar Charging Kit – Portable, Waterproof & High Efficiency The 100W 12V Folding Solar Charging Kit is a premium, all-weather solar solution designed for campers, caravans, boats, and other 12V battery systems. Featuring high-quality monocrystalline solar cells and a genuine IP67 waterproof solar charge controller, this kit delivers reliable solar power anywhere, while remaining lightweight, portable, and easy to use. Why Choose the 100W Folding Solar Charging Kit? Durable & Weatherproof Fully waterproof design, including the integrated solar charge controller. Protective case with foam padding prevents accidental damage during storage and transport. High efficiency even in low light conditions, ensuring maximum energy capture. Portable & Easy to Use Lightweight (12 kg) and compact for easy transport and storage. Adjustable folding aluminium stand for optimal solar angle and output. Ready-to-use kit with all essential cables and connectors included. Key Features Peak Power: 100W Voltage: 12V Maximum Power Voltage (Vmp): 17.5V Maximum Power Current (Imp): 5.07A (2 x 2.85A) Open Circuit Voltage (Voc): 21.6V Short Circuit Current (Isc): 6.2A (2 x 3.1A) Power Tolerance: ±3% Dimensions (Folded): 51 × 69 × 6 cm Weight: 12 kg Warranty: 1 year Included Accessories Two 50W folding solar panels 10A waterproof solar charge controller Adjustable aluminium stand with handle and latches 5m cable with battery plug and fuse Battery crocodile clips for easy connection Protective storage case Installation manual Ideal Applications Mobile solar setups – campers, caravans, motorhomes, and boats Portable off-grid energy – battery charging for outdoor activities and travel Temporary solar power – flexible, non-permanent energy solution for 12V systems ✅ The 100W 12V Folding Solar Charging Kit provides portable, high-efficiency, and fully waterproof solar power, making it ideal for adventurers, boaters, and off-grid energy users in the UK.

300W 12V/24V Lightweight Folding Solar Panel without a Solar Charge Controller  #21: 300W 12V/24V Lightweight Folding Solar Panel without a Solar Charge Controller  To view our full range of folding solar panels visit our main page here 300W 12V/24V Lightweight Folding Solar Panel – Portable, Durable & High-Efficiency The 300W Lightweight Folding Solar Panel is a premium, waterproof solar solution designed for portable energy on the go. Ideal for vehicles, boats, caravans, or portable power stations, it provides reliable solar power without the permanence of mounted panels. Built with high-quality monocrystalline solar cells, an ETFE protective surface, and a reinforced anodised aluminium frame, this panel is perfect for outdoor adventures and travel. Why Choose the 300W Folding Solar Panel? Portable & Lightweight Design Compact and foldable for easy storage and transport. Lightweight (10.54 kg) for effortless handling. Protective storage case keeps the panel safe when not in use. Durable & Weatherproof 100% waterproof with high-quality ETFE surface. Anodised aluminium frame ensures long-lasting durability. Suitable for all weather conditions, including low-light environments. Key Features Peak Power: 300W Voltage Options: 12V / 24V Maximum Power Voltage (Vmp): 18.2V Maximum Power Current (Imp): 16.49A Open Circuit Voltage (Voc): 21.4V Short Circuit Current (Isc): 17.47A Power Tolerance: ±5% Dimensions (Folded): 900 × 590 × 70 mm Weight: 10.54 kg Warranty: 1 year Included Accessories Adjustable aluminium folding stand for optimal solar angle 5m battery extension cable 4 terminal cables including crocodile clips and bare-ended connectors Protective storage case Ideal Applications Portable solar for vehicles – cars, vans, and campervans Marine use – boats and yachts Off-grid power – portable power stations, RVs, and outdoor events Temporary installations – for camping or mobile energy needs ✅ The 300W 12V/24V Lightweight Folding Solar Panel offers a versatile, high-efficiency, and portable solar power solution, ideal for travel, outdoor adventures, and off-grid energy requirements in the UK. Please note: This solar panel is not supplied with a solar charge controller. This enables you the flexibility of choosing a controller best suited to your application. You can use your existing solar charge controller with this panel or use it with a device which has an in-built charge regulator (for example, if your portable power station or portable battery bank has one). Please note this panel comes pre-wired for a 12V battery connection and will require re-wiring for 24V.

245W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 245W Flexible Cigs Solar Panel with Self-Adhesive Backing 245W Datasheet 245W Technical Drawing  To view our full range of flexible solar panels visit our main page here   245W Flexible CIGS Solar Panel with Self-Adhesive Backing – High Efficiency, Lightweight & Durable The 245W Flexible CIGS Solar Panel is a premium TÜV-certified solar solution manufactured in Sweden to the highest European quality standards. Using advanced CIGS thin-film technology, this panel delivers exceptional efficiency, superior shading performance, and long-term durability. Its flexible and lightweight design makes it ideal for curved surfaces, modern architecture, mobile setups, rooftops, and industrial projects. Why Choose the 245W Flexible CIGS Solar Panel? Advanced CIGS Thin-Film Technology High-efficiency CIGS cells provide reliable energy generation, even in shaded conditions. Shatterproof and crack-resistant construction ensures long-lasting performance. Eco-friendly design, offering one of the lowest carbon footprints in the solar industry. Lightweight, Flexible & Easy to Install Self-adhesive backing for quick peel-and-stick installation. Lightweight (5.8 kg) for easy handling and versatile placement. Low-profile, discreet design, perfect for narrowboat decks, motorhome roofs, curved architectural surfaces, and standing-seam metal roofs. Key Features Peak Power: 245W Maximum Power Voltage (Vmp): 36.4V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 45.6V Short Circuit Current (Isc): 7.6A Dimensions: 4,025 × 516 × 2 mm Weight: 5.8 kg Durable, long-lasting technology with minimal maintenance Product Warranty: 10 years Performance Warranty: 25 years Ideal Applications Mobile solar setups – motorhomes, caravans, boats Curved or unconventional rooftops – residential, commercial, or industrial projects Off-grid or grid-connected systems with a suitable inverter ✅ The 245W Flexible CIGS Solar Panel with Self-Adhesive Backing combines efficiency, versatility, and durability, making it a perfect solution for eco-friendly solar power for mobile, architectural, or industrial applications in the UK. Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. Please note: this panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

165W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 165W Flexible Cigs Solar Panel with Self-Adhesive Backing 165W Datasheet 165W Technical Drawing  To view our full range of flexible solar panels visit our main page here 165W Flexible CIGS Solar Panel with Self-Adhesive Backing – Lightweight, Durable & High Efficiency The 165W Flexible CIGS Solar Panel is a premium TÜV-certified solar solution manufactured in Sweden to top European quality standards. Using advanced CIGS thin-film technology, this panel delivers exceptional efficiency, superior shading performance, and long-lasting durability. Its flexible, lightweight design makes it perfect for curved surfaces, modern architecture, mobile setups, rooftops, and industrial projects. Why Choose the 165W Flexible CIGS Solar Panel? Advanced CIGS Thin-Film Technology High-efficiency CIGS cells for reliable energy production, even in shaded conditions. Shatterproof and crack-resistant construction ensures long-term performance. Eco-friendly design, providing one of the lowest carbon footprints in the solar industry. Flexible, Lightweight & Easy to Install Self-adhesive backing allows for quick peel-and-stick installation. Lightweight (4.0 kg) for easy transport and versatile applications. Low-profile design, ideal for narrowboat decks, motorhome roofs, curved architectural surfaces, and standing-seam metal roofs. Key Features Peak Power: 165W Maximum Power Voltage (Vmp): 25.0V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 30.4V Short Circuit Current (Isc): 7.6A Dimensions: 4,025 × 358 × 2 mm Weight: 4.0 kg Long-lasting technology requiring minimal maintenance Product Warranty: 10 years Performance Warranty: 25 years Ideal Applications Mobile solar setups – motorhomes, caravans, and boats Curved or unconventional rooftops – residential, commercial, or industrial projects Off-grid or grid-connected systems using a suitable inverter ✅ The 165W Flexible CIGS Solar Panel with Self-Adhesive Backing is a highly efficient, versatile, and durable solar solution for UK installations, providing reliable, eco-friendly solar power for mobile, architectural, or industrial applications. Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. Please note: this panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

185W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 185W Flexible Cigs Solar Panel with Self-Adhesive Backing 185W Datasheet 185W Technical Drawing  To view our full range of flexible solar panels visit our main page here   185W Flexible CIGS Solar Panel with Self-Adhesive Backing – Lightweight, Durable & High Efficiency The 185W Flexible CIGS Solar Panel is a premium TÜV-certified solar solution manufactured in Sweden to the highest European quality standards. Using advanced CIGS thin-film technology, this panel delivers exceptional efficiency, superior shading performance, and long-lasting durability. Its flexible, lightweight design makes it ideal for curved surfaces, modern architecture, mobile setups, rooftops, and industrial projects. Why Choose the 185W Flexible CIGS Solar Panel? Advanced CIGS Thin-Film Technology High-efficiency CIGS cells for reliable energy generation, even in shaded conditions. Shatterproof and crack-resistant construction ensures long-term performance. Eco-friendly design, with one of the lowest carbon footprints in the solar industry. Flexible, Lightweight & Easy to Install Self-adhesive backing allows quick peel-and-stick installation. Lightweight (4.4 kg) for easy transport and versatile applications. Low-profile design, perfect for narrowboat decks, motorhome roofs, curved architectural surfaces, and standing-seam metal roofs. Key Features Peak Power: 185W Maximum Power Voltage (Vmp): 27.3V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 34.2V Short Circuit Current (Isc): 7.6A Dimensions: 3,077 × 516 × 2 mm Weight: 4.4 kg Durable, long-lasting technology requiring minimal maintenance Product Warranty: 10 years Performance Warranty: 25 years Ideal Applications Mobile solar setups – motorhomes, caravans, boats Curved or unconventional rooftops – residential, commercial, or industrial projects Off-grid or grid-connected systems with a suitable inverter ✅ The 185W Flexible CIGS Solar Panel with Self-Adhesive Backing is a versatile, durable, and high-efficiency solution for UK installations, offering reliable solar power for mobile, architectural, or industrial applications. Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. This panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

125W Low Voltage Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 125W Low Voltage Flexible Cigs Solar Panel with Self-Adhesive Backing 125W Datasheet 125W Technical Drawing  To view our full range of flexible solar panels visit our main page here   125W Low Voltage Flexible CIGS Solar Panel with Self-Adhesive Backing – Lightweight, Durable & High Efficiency The 125W Low Voltage Flexible CIGS Solar Panel is a premium TÜV-certified solar solution manufactured in Sweden to strict European standards. Using advanced CIGS thin-film technology, this panel delivers exceptional efficiency, superior shading performance, and long-term durability. Its lightweight and flexible design makes it ideal for curved surfaces, modern architecture, mobile setups, rooftops, and industrial projects. Why Choose the 125W Flexible CIGS Solar Panel? Advanced CIGS Thin-Film Technology High-efficiency CIGS cells for reliable energy generation, even in shaded conditions. Shatterproof and crack-resistant construction ensures long-term performance. Eco-friendly and low carbon footprint, offering one of the most sustainable solar solutions on the market. Flexible, Lightweight & Easy to Install Self-adhesive backing allows for quick peel-and-stick installation. Lightweight (3 kg) for easy transport and versatile applications. Low-profile design, ideal for motorhome roofs, narrowboat decks, curved architectural surfaces, and standing-seam metal roofs. Key Features Peak Power: 125W Maximum Power Voltage (Vmp): 18.9V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 22.9V Short Circuit Current (Isc): 7.6A Dimensions: 3,077 × 358 × 2 mm Weight: 3.0 kg Long-lasting technology with minimal maintenance required Product Warranty: 10 years Performance Warranty: 25 years Ideal Applications Mobile solar setups – motorhomes, caravans, and boats Curved or unconventional rooftops – residential, commercial, or industrial projects Off-grid or grid-connected systems using a suitable inverter ✅ The 125W Low Voltage Flexible CIGS Solar Panel with Self-Adhesive Backing is perfect for lightweight, durable, and high-efficiency solar power solutions in the UK, combining versatility, reliability, and eco-friendly design. Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. This panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

120W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 20W Flexible Cigs Solar Panel with Self-Adhesive Backing 120W Datasheet 120W Technical Drawing  To view our full range of flexible solar panels visit our main page here 120W Flexible CIGS Solar Panel with Self-Adhesive Backing – Lightweight, Durable & High Efficiency The 120W Flexible CIGS Solar Panel is a premium, TÜV-certified solar solution manufactured in Sweden to top European quality standards. Using advanced CIGS thin-film technology, these flexible panels deliver high efficiency, excellent shading performance, and long-lasting durability. Their lightweight and flexible design makes them ideal for curved surfaces, modern architecture, mobile setups, rooftops, and industrial projects. Why Choose the 120W Flexible CIGS Solar Panel? Advanced CIGS Thin-Film Technology High-efficiency CIGS cells for reliable energy generation even in low-light conditions. Shatterproof and crack-resistant design ensures long-term durability. Eco-friendly and low carbon footprint, making it one of the most sustainable solar solutions available. Flexible & Easy to Install Self-adhesive backing for simple peel-and-stick installation. Lightweight (3 kg) for easy transport and setup. Low-profile design, ideal for narrowboat decks, motorhome roofs, curved architectural surfaces, and standing-seam metal roofs. Key Features Peak Power: 120W Maximum Power Voltage (Vmp): 18.2V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 22.9V Short Circuit Current (Isc): 7.6A Dimensions: 3,077 × 358 × 2 mm Lightweight and durable – only 3.0 kg Product Warranty: 10 years Performance Warranty: 25 years Installation Notes Requires a solar charge controller/regulator to safely charge 12V batteries. Not supplied with solar cable – recommended: pair of 5m 4.0mm² cables with MC4-compatible connectors. Can be used in off-grid or grid-connected systems using a suitable inverter. Ideal Applications Mobile solar setups: motorhomes, caravans, narrowboats Curved or unconventional rooftops for residential or commercial buildings Off-grid power solutions for small-scale solar installations ✅ The 120W Flexible CIGS Solar Panel with Self-Adhesive Backing combines efficiency, versatility, and durability, making it a perfect solution for portable, architectural, or industrial solar projects in the UK. Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. Solar charge controller / regulator to charge a 12V battery, It cannot be connected directly to the battery. 

80W Low Voltage Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 80W Low Voltage Flexible Cigs Solar Panel with Self-Adhesive Backing   80W Datasheet 80W Technical Drawing  To view our full range of flexible solar panels visit our main page here 80W Low Voltage Flexible CIGS Solar Panel with Self-Adhesive Backing – Lightweight, Durable & Versatile The 80W Low Voltage Flexible CIGS Solar Panel is a high-quality, TÜV-certified solar solution manufactured in Sweden to strict European standards. Using advanced CIGS thin-film technology, this flexible panel delivers exceptional efficiency, superior shading performance, and long-lasting reliability. Its lightweight, low-profile design and self-adhesive backing make it perfect for curved surfaces, mobile setups, rooftops, and industrial applications. Why Choose the 80W Flexible CIGS Solar Panel? Advanced Flexible Solar Technology CIGS thin-film cells for high efficiency and long-term performance. Exceptional shading performance, ensuring power generation even in partially shaded areas. Eco-friendly design, one of the lowest carbon footprints in the solar industry. Lightweight & Versatile Design Flexible and durable – ideal for narrowboat decks, motorhome roofs, curved architectural surfaces, and standing-seam metal roofs. Self-adhesive backing for easy installation – peel and stick. Shatterproof and crack-resistant, designed to last for decades. Key Features Peak Power: 80W Maximum Power Voltage (Vmp): 12.1V Maximum Power Current (Imp): 6.6A Open Circuit Voltage (Voc): 15.2V Short Circuit Current (Isc): 7.6A Lightweight: 2.1 kg Dimensions: 2,129 × 358 × 2 mm Product Warranty: 10 years Performance Warranty: 25 years Low profile and discreet design, almost invisible once installed. Installation & Usage Notes Requires a 12V solar charge controller/regulator to safely charge batteries. Additional solar cables required – recommended: pair of 5m single-core 4.0mm extension leads. Not supplied with solar cable, suitable for DIY or professional installations. Ideal Applications Mobile solar setups – motorhomes, caravans, and boats Curved or unconventional rooftops – modern architecture and industrial projects Off-grid or grid-connected installations using a suitable inverter ✅ The 80W Low Voltage Flexible CIGS Solar Panel is the perfect combination of efficiency, durability, and versatility, providing long-term solar power for mobile, residential, or industrial applications.

Pylon Force-H3 High Voltage System stack of 7 incl. BMU (35.8 kWh) #2:PYL-F-H3-BATT-BMU-35.8 Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty Pylontech Force H3 – High-Voltage LiFePO4 Battery Storage System The Pylontech Force H3 is the latest generation high-voltage LiFePO4 battery system, designed for residential and commercial energy storage applications. Engineered for high performance, reliability, and scalability, this system is ideal for users seeking long-lasting, efficient battery storage compatible with a wide range of inverters. What’s Included 7 x Pylontech Force H3 5.1kWh High-Voltage Battery Modules (PYL-F-H3-BATT) 1 x Pylontech Force H3 BMU with base and cables (PLY-F-H3-BMU-BASE) Key Features Easy Installation Plug & Play: Quick and simple installation, reducing setup time. Remote Monitoring: Track system performance via a dedicated app. Scalability & Compatibility Expandable: Connect up to 7 battery towers in parallel for larger energy storage. High Compatibility: Works with other well-known battery brands. 1C Rating: Enables faster charging and discharging. Durability & Reliability Long Lifespan: Designed for 8,000+ charging cycles or up to 15 years. Global Certification: Ensures safety and compliance across markets. Warranty: Standard 10-year warranty included. Technical Specifications Specification Value Weight 314.2 kg Nominal Energy 35,840 Wh Depth of Discharge 95% Voltage 716 V Continuous Discharge Rate (Normal Use) 35,840 W Maximum Discharge Rate (5 minutes) 35,840 W Surge Discharge Rate (15 seconds) 39,424 W Note: Not suitable for Solis 3-phase hybrid inverters smaller than 12 kW (5–10 kW range), as system voltage exceeds 600 V. Why Choose Pylontech Force H3? High Performance: Reliable high-voltage battery for both residential and commercial use. Flexible & Scalable: Expandable system to meet growing energy needs. Long-Term Value: Over 15 years of operational life with minimal maintenance. Advanced Monitoring: Manage energy storage efficiently with remote app access.

Dyness DL5.0C 5.12kWh LV LFP Battery with Heated Cells (indoor only) #2: DY-DL5.0C-H  #4: DY-DL5.0C Dyness DL5 5.12kWh Datasheet Dyness DL5 5.12kWh User Manual Dyness Compatibility List Dyness DL5  5.12kWh Warranty To view complete Dyness full range please visit our Dyness main page Dyness DL5.0C Dyness DL5.0C features an economical design for residential and small commercial use. This LFP battery module supports remote upgrades and app monitoring, offers multiple installation methods, and is scalable from 5.12kWh to 256kWh (up to 50 modules in parallel) to meet various energy needs. This LiFePO4 battery is compatible with most leading inverter brands (ie. Solis, Single Phase and low voltage inverters). No busbar required for additional batteries. The contents include:  1 x Parallel cable - positive Red /4AWG/L250mm 1 x Parallel cable - negative Black /4AWG/L250mm 1 x Communication parallel cable - Black /L500mm/Double RJ45 plug 1 x Communication cable-to inverter - Black /L2000mm /Double RJ45 plug 1 x Ground wire - L500mm,4mm² 8 x M6 Screws  8 x Expansion Screws 1 x User Manual User manual Wall brackets Per PAS regulation, this battery requires a battery disconnector (KETO-00-80A)   Features APP Monitoring - Real-time monitoring & Remote upgrades available Module Design and Easy install  Support Battery Charge & Discharge under low ambient temperature Wall-mounted, floor-standing and stacked High Safety LFP - Cell level monitoring and balancing Wide Compatibility - Matching with leading inverters LiFePO4 battery, Safe, Longer life span Scalable up to 40 batteries in parallel Natural cooling with optional heat/fan configuration Wide temperature range of -20+55, can be applied to various working environments Specs Weight: 54kg Nominal Energy: 5,120 wh Depth of Discharge: 90% Voltage: 51 V Continous Discharge (Normal Use):  5,632 W Maximum Discharge Rate (5 minutes): 3,840 W Surge Discharge Rate (15 seconds):  5,632 W Maximum Discharge Rate: 3,840 W 

SolaX X1-IES 3.7kW 1ph Hybrid Inverter + 5kWh TP-HS50E Li-ion Battery  #3: 6664#6638 X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report   This offer consists of:  1 x 3.7kW single phase hybrid inverter 1 x 5kWh battery This INTEGRATED All In One residential ESS comes with a 3.7kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.   Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 730 x 908 x 210mm Warranty: 10 years standard Specs: Combined Weight: 87.2 kg Rated Output Power: 3,700 W Max PV Power: 7.4kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 3,680W AC Output Current: 16.0A Max DC Current:  50 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

 SolaX X1-IES 8kw AIO 1ph Hybrid Inverter + 5kWh TP-HS50E Li-ion Battery - Bundle #3:  6673#6646. X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report   This offer consists of:  1 x 8kW single phase hybrid inverter 1 x 5kWh HS50E Battery This INTEGRATED All In One residential ESS comes with a 8kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.  Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 717 x 350 x 210mm  Warranty: 10 years Specs: Weight: 113.6  kg Rated Power: 8,000 W Max PV Power: 16.0kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 8,000W AC Output Current: 34.8 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

SolaX X1-IES 8.0kW 1ph Hybrid Inverter + TP-HS50E Li-ion Battery - Bundle #3:  X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report   This offer consists of:  1 x 8kW single phase hybrid inverter 1 x 5kWh battery This INTEGRATED All In One residential ESS comes with a 6kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.   Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 730 x 908 x 210mm Warranty: 10 years standard Specs: Combined Weight: 87.2 kg Rated Output Power: 8,000 W Max PV Power: 12.0kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 6,000W AC Output Current: 26.1A Max DC Current:  50 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

Fox EQ HV EQ4800-L8, 37.27kWh 1x Master 7x Slave   2:  FE-HV-EQ-8-4.8-38.4  Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ 4.66kWh – Stack of 8 (37.27kWh Usable) with Master The Fox EQ high-performance battery storage system is a modular, scalable solution designed for both residential and commercial energy storage. With its plug-and-play design, wide operating temperature tolerance, and advanced CAN/RS485 communication, the EQ series ensures reliability, flexibility, and ease of installation. This system includes one Master EQ4800 battery and seven Slave EQ4800 batteries, providing a total usable capacity of 37.27kWh. The EQ range is fully compatible with ECS-4800 batteries, giving installers and homeowners future-proof flexibility. ⚠️ Important: All Fox installations must be registered online to receive the 12-year warranty. Without registration, the standard warranty is 5 years. Key Features High Capacity: 4.66kWh per module, scalable up to 41.94kWh (9 modules per stack). Reliable Performance: 90% depth of discharge and wide temperature tolerance. Plug & Play: Quick, simple, and efficient installation. Communication: CAN/RS485 for seamless system integration. High Voltage Design: Ideal for larger systems and demanding applications. Future-Ready: Compatible with ECS-4800 batteries. Specifications Battery Type: Lithium-Ion Nominal Energy: 37,270 Wh Usable Energy (DoD 90%): 37.27kWh Voltage: 583 V Continuous Discharge Power: 2,240 W Max Discharge (5 min): 4,480 W Surge Discharge (15s): 5,785 W Max Charge Rate (5 min): 4,480 W Dimensions (W x H x D): 570 x 1241 x 380 mm Weight: 332.5 kg Warranty: 12 years (with registration), 5 years otherwise Installation Notes A minimum of 2 modules (1 Master + 1 Slave) is required for operation. Up to 9 modules can be stacked (1 Master + 8 Slaves). If adding modules to an existing stack, ensure compatibility with original units. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L7, 32.61kWh 1x Master 6x Slave 2:   FE-HV-EQ-7-4.8-33.6 Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ 4.66kWh High-Performance Scalable Battery Storage – 32.61kWh Stack The Fox EQ Battery Storage System is a high-performance, modular energy storage solution designed for flexibility and scalability. Its modular design allows additional batteries to be added, reaching a maximum storage capacity of 41.94kWh, making it suitable for a wide range of residential and commercial applications. Important: To extend the standard 5-year warranty to a 12-year product warranty, you must register your installation with Fox online. Failure to register will result in the standard 5-year warranty.  Fox EQ 4.66kWh Battery Stack – Includes Master & Slave Modules This stack includes: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 6 x Fox EQ4800, 4.66kWh HV Battery (Slave) (FE-HV-EQS-4800) Compatibility: EQ4800 modules are compatible with ECS-4800 batteries. Key Features of the Fox EQ 4.66kWh Battery Plug-and-play installation for fast and simple setup 4.66kWh per module, scalable up to 41.94kWh High Depth of Discharge: 90% for maximum usable energy Wide temperature tolerance for reliable performance CAN/RS485 communication for smart system integration High-voltage design for efficient energy transfer Technical Specifications Specification Details Weight 291 kg Battery Type Lithium-ion Nominal Energy 32,610 Wh Depth of Discharge 90% Voltage 313 V Continuous Discharge Rate 2,240 W Maximum Discharge Rate (5 min) 4,480 W Surge Discharge Rate (15 sec) 5,785 W Maximum Charge Rate (5 min) 4,480 W Dimensions (W x H x D) 570 x 1,067 x 380 mm Installation Notes Minimum of 2 modules required (1 Master + 1 Slave) Can accommodate up to 9 modules in a stack (1 Master + 8 Slaves) When adding modules to an existing Energy Cube stack, ensure compatibility with existing battery modules Must be installed by a qualified electrician Why Choose the Fox EQ Battery Storage System? The Fox EQ 4.66kWh modular battery system is perfect for UK homes and businesses seeking reliable, scalable, and high-performance energy storage. With plug-and-play installation, advanced communication features, and the ability to expand capacity, it allows you to maximise solar self-consumption, optimise energy use, and ensure long-term operational reliability. Order now from ITS Technologies – your trusted UK supplier for solar PV, battery storage, and energy management solutions.

Fox EQ HV EQ4800-L6, 27.96kWh 1x Master 5x Slave 2:  FE-HV-EQ-6-4.8-28.8 Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ Battery Storage – 27.96kWh (Stack of 6 with Master) The Fox EQ series is a high-performance, modular high-voltage battery storage system designed for scalability and flexibility. This system includes a master battery plus five slave batteries, delivering a total usable storage capacity of 27.96kWh. With a plug-and-play design, 90% depth of discharge, and wide operating temperature tolerance, the Fox EQ is suitable for a broad range of residential and commercial energy storage applications. Additional batteries can be added to expand the system up to 41.94kWh. ⚠️ Important: To activate the full 12-year warranty, all Fox installations must be registered online. Unregistered installs default to a 5-year warranty. What’s Included 1 x Fox EQ4800 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 5 x Fox EQ4800 4.66kWh HV Battery (Slave) (FE-HV-EQS-4800) ✅ Compatible with ECS-4800 batteries Key Features Plug-and-play installation – quick and easy setup 4.66kWh per module, scalable up to 41.94kWh 27.96kWh usable storage (with this stack of 6) 90% depth of discharge for maximum capacity use Wide temperature tolerance for reliable performance CAN/RS485 communication for system integration High-voltage design for efficiency and flexibility Technical Specifications General Weight: 249.5 kg Battery Type: Lithium-ion Nominal Energy: 27,960 Wh (27.96kWh) Depth of Discharge: 90% Dimensions: 570 x 938 x 380 mm (W x H x D) Electrical Performance Voltage: 268 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Installation Notes Requires a minimum of 2 modules (1x Master + 1x Slave) to operate Supports up to 9 modules in a stack (1x Master + 8x Slaves) Must be installed by a qualified electrician If expanding an existing Energy Cube stack, ensure compatibility with original modules Why Choose the Fox EQ Battery System? Scalable energy storage to suit your needs Designed for long-lasting, efficient performance High voltage for improved round-trip efficiency Future-proof investment with up to 12 years warranty ✅ The Fox EQ Battery Storage System (27.96kWh) is a scalable, efficient, and reliable solution – perfect for maximising solar energy usage and reducing grid dependence. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L4, 18.64kWh 1x Master 3x Slave #2:  FE-HV-EQ-4-4.8-19.2  Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, modular battery storage solution designed for residential and commercial energy applications. Its scalable design allows maximum flexibility, enabling additional modules to increase storage capacity up to 41.94 kWh. Warranty Reminder: Register your installation with Fox online to activate the 12-year product warranty. Without registration, the standard warranty is 5 years. Fox EQ4800 4.66kWh – Stack of 4 (18.64kWh Useable Storage) This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 3 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are fully compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Quick and easy setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable in various climates Advanced Communication: CAN/RS485 connectivity for intelligent energy management High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 166.5 kg Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 18,640 Wh Depth of Discharge: 90% Voltage: 179 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 622 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure any added modules match your existing Energy Cube stack Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 Stack of 4 is ideal for homeowners or businesses seeking a scalable, high-performance solar battery storage solution with reliable performance and expandability. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L3, 13.98kWh 1x Master 1x Slave #2: FE-HV-EQ-3-4.8-14.4 Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, scalable battery storage solution designed for both residential and commercial energy applications. Its modular design allows for maximum flexibility, making it suitable for a broad range of storage needs. Additional battery modules can be added to reach a maximum storage capacity of 41.94 kWh. Warranty Reminder: Register your installation with Fox online to activate the 12-year product warranty. Without registration, the standard warranty is 5 years. Fox EQ4800 4.66kWh – Stack of 3 (13.98kWh Useable Storage) This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 2 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Easy and fast setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable performance in diverse environments Advanced Communication: CAN/RS485 connectivity for smart energy management High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 125.5 kg Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 13,980 Wh Depth of Discharge: 90% Voltage: 134 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 524 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure any added battery modules match your existing Energy Cube stack Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 Stack of 3 is an ideal solution for scalable, high-performance solar storage, providing reliable, expandable energy for homes and businesses in the UK. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.