Special Offers (22)

GSL 10.24kWh Powerwall Battery - Wall Mounted GSL PowerWall Datasheet GSL PowerWall Warranty GSL PowerWall Installation manual   1 GSL051200A-B-GBP The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility. Busbar required for multiple batteries, package available here with cables.

SPECIAL OFFER Sunsynk ECCO 3.6kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1:SUN-3.6-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 80A Victron Lynx for 2+ batteries Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk Warranty Sunsynk 3.6Kw G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kWh Powerwall battery The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print. Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.   Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money. The GSL 10.24kWh Powerwall battery offers versatile energy storage, suitable for both wall and floor mounting. It includes necessary cables and a base, ensuring compatibility with Sunsynk, Victron, and Voltronic hybrid inverters. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

SPECIAL OFFER Sunsynk battery storage 5Kw On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-5KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 100A Victron Lynx for 2+ batteries   Sunsynk 5kWw Data Sheet Sunsynk 5kW Installation Manual Sunsynk 5kW Warranty Sunsynk 5kW G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Product Features: Dual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kWh Powerwall battery The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print. Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money. The GSL 10.24kWh Powerwall battery offers versatile energy storage, suitable for both wall and floor mounting. It includes necessary cables and a base, ensuring compatibility with Sunsynk, Victron, and Voltronic hybrid inverters. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

SPECIAL OFFER Sunsynk battery storage 8kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-8KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs - LUG35-8 2m Red & Black 35mm2 battery Cable Keto 160A - KETO-00  & 2 x N5014907-160A  Victron Lynx for 2+ batteries   Sunsynk 8kW Data Sheet Sunsynk 8Kw Installation Manual Sunsynk 8kW Warranty Sunsynk 8kW G99 Certificate Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kWh Powerwall battery The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print. Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money. The GSL 10.24kWh Powerwall battery offers versatile energy storage, suitable for both wall and floor mounting. It includes necessary cables and a base, ensuring compatibility with Sunsynk, Victron, and Voltronic hybrid inverters. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

SolaX V2 Triple Power HV 5.8kWh LFP Main Battery MASTER #2: HV-T-BAT-H-58-MASTER-V2 Storage Systems - Lion Battery Pack#3: 3211#4034 V2 batteries confirmed to be compatible with V1 slave batteries SolaX 5.8kWh Data Sheet SolaX 5.8kWh Manual SolaX 5.8kWh Warranty Collections are not permitted due to health & safety regulations Solax Triple Power LFP Main Battery (Master) T-BAT-H-58The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power LFP battery is available as Master Battery 5.8kWh and Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity. Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total).Additional features: Scalable to 23.2kWh Up to 4kW charge/discharge High Voltage means thinner cables are required. Compact Design 90% Depth of discharge 6000 life cycles Easy installation – plug and play with all cables supplied Solax LFP 5.8kWh batteries will initially arrive with Blue TOP. This will change to Black TOP at some point in the near future. Triple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries. They are NOT compatible with Generation 1 or 2 BMS or Batteries! Weight: 72.2 kgBattery Type: Lithium IonNominal Energy: 5800 WhDepth of discharge: 90%Voltage: 115 VContinuous Discharge Rate (Normal Use): 2875 WMaximum Discharge Rate (5 Minutes): 4000 WSurge Discharge Rate (15 Seconds): 4000 WMaximum Charge Rate (5 Minutes): 4000 W

SolaX V2 Triple Power HV 5.8kWh LFP Extension Battery SLAVE #3: HV11550-58-SLAVE-V2 Storage Systems - Lion Battery Pack SolaX V2 Datasheet SolaX V2 Installation Manual SolaX V2 Warranty V2 batteries confirmed to be compatible with V1 slave batteries   Solax Triple Power LFP Extension Battery (Slave) HV11550-58The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power LFP battery is available as Master Battery 5.8kWh and Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity. Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total).- Additional features:- Scalable to 23.2kWh- Up to 4kW charge/discharge- High Voltage means thinner cables are required.- Compact Design- 90% Depth of discharge- 6000 life cycles- Easy installation – plug and play with all cables suppliedTriple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries. They are NOT compatible with Generation 1 or 2 BMS or Batteries!Solax LFP 5.8kWh batteries will initially arrive with Blue TOP. This will change to Black TOP at some point in the near future.Please note this is a HV11550-58 Extension (Slave) Battery only, it requires HV-T-BAT-H-58 Main Battery(Master) to work. Weight: 72.2 kgBattery Type: Lithium IonNominal Energy: 5800 WhDepth of discharge: 90 %Voltage: 115 VContinuous Discharge Rate (Normal Use): 2875 WMaximum Discharge Rate (5 Minutes): 4000 WSurge Discharge Rate (15 Seconds): 4000 WMaximum Charge Rate (5 Minutes): 4000 W

Sunsynk 5.12kWh 100% D.O.D CATL Battery LFP #1: SUN-BAT-CATL-5.12 Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk 5.12kWh Data Sheet Sunsynk 5.12kWh Manual Sunsynk 5.12kWh Warranty (Not compatible with other Sunsynk batteries such as L5.3, G5.3 or BYD 5.32kwh.) *Collections are not permitted due to health & safety regulations*Accessories pack for Sunsynk batteries Battery to battery cable required for linking Sunsynk batteries Introducing Sunsynk's energy storage module well designed for residential UPS and off-grid applications. Product Features Long life span with an expected life of 10-years 5-year product warranty and 10-year performance warranty Parallel capability of 16 units 100% Depth of Discharge 5.12kW maximum discharge power (C1 rated) Batteries provide excellent thermal stability and storage and also has a self-monitoring function to detect abnormalities. IP rating 40 Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

PylonTech US3000C 3.5kWh Li-Ion Solar & wind Battery Storage D.O.D of 95% Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.  #2: PYLON-US3000C #4: US3000C#17: Pylon 3.5kwh US3000 C Li-ion Battery US3000C Datasheet US3000C Installation Manual US3000C Warranty   To view complete Pylon kits please visit our Pylontech main page Battery to battery connecting cables included as standard The next generation of affordable, reliable storage has arrived. Pylontech's US2000B and US3000 batteries have been a frequent choice for prudent installers who value reliability, wide compatibility and ease of use. Now Pylontech have released an enhanced version of both 2.4kWh and 3.5kWh Li-ion units with impressive features. In a nutshell the new US2000C and US3000C batteries offer a higher depth of discharge - now a staggering 95% - and 16 units can be installed in parallel - double the capacity than before!The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.The Pylontech US3000C has an incredible DoD of 95%.Advantages- Vertical industry integration ensures cycle life of 6000 cycles- Compact and fashionable design fits in your home environment- Deliver up to 3.5kW* with single module (3.5kWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.8kW per battery- Modular design gives the end customers the power of choice of capacity- Compatible with large number of Hybrid inverters- Simple buckle fixing minimize the installation time and cost- Provides pre-charge function to protect ESS system from surge current.- Up to 16 units can be stacked in parallelTo extend the warranty you have to register here: http://en.pylontech.com.cn/service/supportThe US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank. * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries ahave been insatlled by an electrician or authorised installer.

GROWATT MIC 1500TL X Single MPPT with Arc Fault Protection with DC #2: GROWATT-MIC1500-TL-X-AFP-DC Inverters - Main Units#3: 5391 GROWATT 1500TL X Data Sheet GROWATT 1500TL X Manual GROWATT 1500TL X Warranty GROWATT 1500TL X G100 Certificate *Collections are not permitted due to health & safety regulations* Rating: 1,500WPhases: 1Growatt inverters are designed specifically for residential rooftop applications. With a maximum efficiency of 97% and a wide input voltage range, this robust inverter is perfect for residential installations. The TL-X range has a single MPPT.The Growatt inverter range has the following leading-edge technology. MPPT tracking accuracy of 99% Max. Efficiency 97.6%, European Efficiency 96.5% Transformerless design, offer lighter and more convenient installation Power factor continuously adjustable Flexible interface Touch key & OLED display UK: The Installer Code Policy is in the process of being introduced in the UK and Ireland. This means all installers will need to register an Installer Code to use the Growatt monitoring platform. This installer code can be provided to the end user to allow for the end user to monitor their account. Weight: 6,5 kgRated Power: 1,500 WMin PPT Voltage: 50 VMax PPT Voltage: 500 VDC Startup Voltage: 50 VDC Shutdown Voltage: 50 VMax Input Voltage: 500 VMax DC Power: 2,100 WMax AC Power (5 Minutes): 1,500 WSurge AC Power (1 Second): 1,500 WMax DC Current: 13 AMax DC Inputs: 1Has DC Fuses: 0Connector: Amphenol H4Included Connectors: 1Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 1Has Integrated DC Switch: YesWarranty: 10 years Please note: In order to achieve anti reflux function on TL-X and TL-XE range, you must use Meter SPM-E. Using a CT clamp to try and achieve this is not possible. Please contact us for more details.

SolaX X1-8.0 Smart Single Phase Dual MPPT Inverter (inc DC) #3: 4454 Sola X1 FIT Data Sheet Sola X1 FIT Installation Manual *Collections are not permitted due to health & safety regulations* SolaX X1-8.0 Smart Single Phase Dual MPPT Inverter (inc DC) The SolaX single phase inverters are designed with an extensive MPPT voltage range, enhancing energy collection capabilities. Equipped with sophisticated DSP control technology, these inverters achieve a remarkable maximum efficiency of up to 97.4%, ensuring optimal energy conversion. Key Features: Low Start-Up Voltage High Efficiency Small & Lightweight Remote Monitoring Compatible with WiFi V2.0 AC attributes Max power: 8000W Max current: 38.3A Number of phases: 1 DC attributes Number of MPPT: 2 V range of MPPT: 100 - 530V Max power: 12000W Max Isc current: 12A / 24 Max voltage: 530V Start up voltage: 120V System Max efficiency: 97.4%IP rating: IP65Export limitations: With meter or CTWeight: 22kgDimensions: 401x450x190 mmCommunication: RS485, (wifi, GPRS optional)Warranty: 5 years For a full list of SolaX products click here.

SMA Sunny Boy 6.0kW Solar Inverter - Single Phase with Smart Connect #4: SB6.0-1AV-41 SMA 6.0kW Data Sheet SMA 6.0kW Manual SMA 6.0kW Warranty SMA 6.0kW G99 Certificate Rating: 6,000WPhases: 1 The new Sunny Boy 6.0 is more than just a PV inverter: with the integrated SMA Smart Connected service, it offers all-round comfort for PV system operators and installers alike. The automatic inverter monitoring by SMA analyses operation, reports irregularities and thus minimises downtime. The Sunny Boy is ideally suited to solar power generation in private homes. Thanks to its extremely light design and location of the external connections, the device can be quickly installed and easily commissioned thanks to the intuitive webserver. Current communication standards mean that intelligent energy management solutions, as well as SMA storage solutions, can be flexibly added to the inverter at any time. SMA Smart Connected The integrated service for ease and comfort SMA Smart Connected* is the free monitoring of the inverter via the SMA Sunny Portal. If there is an inverter fault, SMA proactively informs the PV system operator and the installer. This saves valuable working time and costs. With SMA Smart Connected, the installer benefits from rapiddiagnoses by SMA. They can thus quickly rectify the fault and score points with the customer thanks to the attraction of additional services. Tigo Optimised Solution The new Sunny Boy 6.0 can be optimised using the Tigo TS4-R solution. The TS4-R module system is a cost-effective system that fits into any PV module design, making it the right solution for every application. With the TS4-R platform, for the first time, every PV module can now be flexibly equipped with an additional function. Only the modules affected by energy yield loss are equipped/fitted with TS4-R This means energy yields can be strategically increased and system costs reduced. Full information can be found in the above video. Manufacturer: SMA Solar Phases: 1 Phase Power Rating: 6 kW Inverter Type: String Inverter Built in DC: Yes No. of MPPT: 2 Built in Communication: Integrated Off-Grid Compatible: Yes Commodity Code: 85044084 Dimensions (mm): (H x W x D)470 x 435 x 176

SMA Sunny Boy 3.6kW Solar Inverter - Single Phase with Smart Connect #4: SB3.6-1AV-41 SMA 3.6kW Data Sheet SMA 3.6kW Manual SMA 3.6kW Warranty SMA 3.6kW G99 Certificate Rating: 3,600WPhases: 1 The new Sunny Boy 3.6 succeeds the globally successful Sunny Boy 3600TL. It is more than just a PV inverter: with the integrated SMA Smart Connected service, it offers all-round comfort for PV system operators and installers alike. The automatic inverter monitoring by SMA analyses operation, reports irregularities and thus minimises downtime. The Sunny Boy is ideally suited to solar power generation in private homes. Thanks to its extremely light design and location of the external connections, the device can be quickly installed and easily commissioned thanks to the intuitive webserver. Current communication standards mean that intelligent energy management solutions, as well as SMA storage solutions, can be flexibly added to the inverter at any time. SMA Smart Connected The integrated service for ease and comfort SMA Smart Connected* is the free monitoring of the inverter via the SMA Sunny Portal. If there is an inverter fault, SMA proactively informs the PV system operator and the installer. This saves valuable working time and costs. With SMA Smart Connected, the installer benefits from rapiddiagnoses by SMA. They can thus quickly rectify the fault and score points with the customer thanks to the attraction of additional services. Tigo Optimised Solution The new Sunny Boy 3.6 can be optimised using the Tigo TS4-R solution. The TS4-R module system is a cost-effective system that fits into any PV module design, making it the right solution for every application. With the TS4-R platform, for the first time, every PV module can now be flexibly equipped with an additional function. Only the modules affected by energy yield loss are equipped/fitted with TS4-R This means energy yields can be strategically increased and system costs reduced. Full information can be found in the above video. Manufacturer: SMA Solar Phases: 1 Phase Power Rating: 3.6 kW Inverter Type: String Inverter Built in DC: Yes No. of MPPT: 2 Built in Communication: Integrated Off-Grid Compatible: Yes Commodity Code: 85044084 Dimensions (mm): (H x W x D) 470 x 435 x 176

SMA Sunny Boy 5.0kW Solar Inverter - Single Phase with Smart Connect #4: SB5.0-1AV-41 SMA 5.0kW Data Sheet SMA 5.0kW Manual SMA 5.0kW Warranty SMA 5.0kW G99 Certificate Rating: 5,000WPhases: 1 The new Sunny Boy 5.0 succeeds the globally successful Sunny Boy 5000TL. It is more than just a PV inverter: with the integrated SMA Smart Connected service, it offers all-round comfort for PV system operators and installers alike. The automatic inverter monitoring by SMA analyses operation, reports irregularities and thus minimises downtime. The Sunny Boy is ideally suited to solar power generation in private homes. Thanks to its extremely light design and location of the external connections, the device can be quickly installed and easily commissioned thanks to the intuitive webserver. Current communication standards mean that intelligent energy management solutions, as well as SMA storage solutions, can be flexibly added to the inverter at any time. SMA Smart Connected The integrated service for ease and comfort SMA Smart Connected* is the free monitoring of the inverter via the SMA Sunny Portal. If there is an inverter fault, SMA proactively informs the PV system operator and the installer. This saves valuable working time and costs. With SMA Smart Connected, the installer benefits from rapiddiagnoses by SMA. They can thus quickly rectify the fault and score points with the customer thanks to the attraction of additional services. Tigo Optimised Solution The new Sunny Boy 5.0 can be optimised using the Tigo TS4-R solution. The TS4-R module system is a cost-effective system that fits into any PV module design, making it the right solution for every application. With the TS4-R platform, for the first time, every PV module can now be flexibly equipped with an additional function. Only the modules affected by energy yield loss are equipped/fitted with TS4-R This means energy yields can be strategically increased and system costs reduced. Full information can be found in the above video. Manufacturer: SMA Solar Phases: 1 Phase Power Rating: 5 kW Inverter Type: String Inverter Built in DC: Yes No. of MPPT: 2 Built in Communication: Integrated Off-Grid Compatible: Yes Commodity Code: 85044084 Dimensions (mm): (H x W x D) 470 x 435 x 176

8 X GSL 10.24kWh Powerwall Battery - Wall Mounted GSL PowerWall Datasheet GSL PowerWall Warranty GSL PowerWall Installation manual The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

12 X GSL 10.24kWh Powerwall Battery - Wall Mounted GSL PowerWall Datasheet GSL PowerWall Warranty GSL PowerWall Installation manual The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.