Solar Inverters

Fox H1 5.0kW Hybrid Inverter G2 #2: FE-H1-5.0-G2 Storage Systems - Hybrid Inverter Fox H1 5.0kW Datasheet Fox H1 5.0kW Manual Fox H1 5.0kW Installer Guide Fox H1 5.0kW G100 Certification Fox Battery Sizing Guide   Single Phase Hybrid/AC Inverter – 5kW with Dual MPPT This single phase 5kW Hybrid/AC Inverter is designed for efficient solar energy storage and flexible system expansion. With dual MPPT technology and up to 97% round-trip efficiency, it ensures optimal solar production and seamless integration with compatible batteries. Perfect for home and small commercial installations, this inverter allows connection of up to seven batteries in series with a maximum storage capacity of 33.24kWh. Key Features ⚡ Easy Installation – streamlined setup process 🔋 High Voltage Compatibility – supports Cube & EP5/11 batteries 🌦️ IP65 Rated – suitable for indoor or outdoor installations 📡 Remote Monitoring – track performance anytime, anywhere 🌞 Dual MPPT Tracking – maximise solar energy harvest 🔄 High Efficiency – 97% round-trip efficiency for minimal energy loss What’s Included CT Clamps WiFi Stick Additional Requirements An extra CT clamp is required if connecting to another generator (PV, wind, etc.) A meter between the inverter and the incoming power connection point is required if distance exceeds 30m Technical Specifications Weight: 22 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 mins): 7,500 W Max AC Power (5 mins): 5,000 W Surge AC Power (1 sec): 5,500 W Max DC Current: 32 A Max DC Inputs: 2 DC Fuses: None Connectors: MC4 (x4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years 🔧 Ideal for system expansion – compatible with both new and existing solar setups.🌍 UK-compliant and built for long-term performance.   Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using HV2600 1M DC Extension Cable  

Solis inverter 20kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-20K-DC #4: S5-GR3P20K-DC Solis 20kW Data Sheet Solis 20kW Manual Solis Inverter 20kW Warranty Solis 20kW G100 Certification   Extended 5yr warranty available here Solis Series 5 GR3P Three Phase Inverter – High Power & Efficient Solar Conversion The Solis Series 5 GR3P Three Phase Grid-Tied Inverter is a robust and high-performance solution for large-scale residential and commercial solar installations. Delivering up to 20kW of rated power, this inverter combines high efficiency, advanced safety features, and reliable performance for maximum energy yield. With a wide voltage range and IP66 rating, it is designed to operate in harsh conditions while ensuring long-term reliability. Key Features & Benefits ✔ Exceptional Efficiency & Performance Maximum efficiency of 98.7% for optimal energy production. Ultra-low start-up voltage of 180V and maximum PV input voltage of 1,100V. Maximum AC output power: 22kW. Supports Max PV DC Power: 30kW. ✔ Advanced Safety & Protection Type-II over-voltage surge protection for both DC and AC. Integrated AFCI (DC arc-fault circuit protection). DC reverse-polarity protection and integrated DC switch for safe operation. ✔ Flexible & Reliable Installation Four 16A PV string inputs with MC4 connectors included. IP66-rated enclosure ensures dust and water protection. NRS-097-2-1 certified for UK compliance. ✔ Smart Monitoring Register on SolisCloud for remote upgrades, monitoring, and control. Technical Specifications Rated Power: 20,000 W Phases: 3 Min MPPT Voltage: 180 V Max MPPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 30,000 W Max AC Power (5 min): 22,000 W Surge AC Power (1 sec): 22,000 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98.1% Transformer: None MPPT Quantity: 2 Weight: 22.94 kg Warranty: 5 years Why Choose Solis Series 5 GR3P? Delivers high-efficiency energy conversion for large solar systems. Advanced safety features like AFCI and surge protection ensure reliable operation. IP66-rated and NRS-certified for installation in harsh UK conditions. Compatible with SolisCloud for remote monitoring and upgrades. ⚡ Maximise your solar energy output with the Solis Series 5 GR3P Three Phase Inverter – a powerful, efficient, and reliable choice for residential and commercial installations.

Solis 15kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-15K-DC Inverters - Main Units Solis 15kW S5 3 Phase Data Sheet Solis 15kW S5 3 Phase Manual Solis 15kW S5 3 Phase Warranty Solis 15kW S5 3 Phase G100 Certificate Extended 5yr warranty available here 15kW Three Phase Grid-Tied Inverter The 15kW three-phase grid-tied inverter is designed for commercial and large-scale residential solar systems, delivering high efficiency and robust protection features. With its IP66-rated casing and dual MPPT inputs, it ensures optimal energy conversion and system reliability. Key Features ⚡ High Efficiency: Max efficiency of 98.6% 🌐 Three-Phase Design: Suitable for large-scale solar installations 🛡️ Comprehensive Protection: Type-II surge protection (DC & AC), AFCI (arc-fault) protection, DC reverse-polarity protection 💧 IP66 Rated: Dust- and water-resistant for outdoor installation 🔄 Dual MPPT: 2 MPPT inputs for maximum solar production ⚙️ Wide Voltage Range: Start-up voltage 180V, max PV input 1,100V 📦 Lightweight & Compact: 22.1 kg for easier handling and installation Technical Specifications Rated Power: 15,000 W Weight: 22.1 kg Min PPT Voltage: 180 V Max PPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 22,500 W Max AC Power (5 mins): 16,500 W Surge AC Power (1 sec): 16,500 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98 % Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Important Notes This inverter does not include: Data logger CT Meter Export power manager This 15kW three-phase inverter is ideal for high-capacity systems, offering high efficiency, robust protection, and dual MPPT tracking to maximise solar energy yield while maintaining long-term reliability. The meter is required for export power control of one inverter. If using more than 1 inverter, use the EPM3-5G-PLUS. The meter requires a data logging stick but the EPM3-5G-PLUS has a built in data logger. These items are sold separately. This system must be installed by a certified / qualified technician.

Fox 10kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-10.0 Inverters - Main Units Fox T Series 10.0kW Datasheet Fox T Series 10.0kW Install Guide Fox T Series 10.0kW Warranty Fox T Series 10.0kW G98 Certificate FoxESS T Series 3-Phase Inverter – 10.0kW Product Overview The FoxESS T Series inverter is a versatile solution for 3-phase residential homes and small commercial installations. Designed for high efficiency and reliability, it integrates seamlessly with solar PV and battery systems, offering a robust IP65-rated enclosure for indoor or outdoor use. Key Features Easy Installation – Plug-and-play design with flexible setup for rapid deployment. IP65 Protection – Dustproof and waterproof for long-lasting outdoor performance. Remote Monitoring – Track system performance via the FoxESS Cloud portal. High Efficiency – Round-trip efficiency of 98.6% ensures maximum energy utilisation. Specifications Weight: 17 kg Rated Power: 10,000 W DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Min/Max MPPT Voltage: 140 – 1,100 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 14 A Number of MPPTs: 2 DC Inputs: 2 DC Fuses: 2 Connector Type: MC4 (2 included) Transformer: None Integrated DC Switch: Yes Euro Efficiency: 97.8 % Warranty: 5 years This inverter is perfect for homeowners and small businesses looking for a reliable, efficient, and remotely monitored 3-phase solar solution. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide   Fox Hybrid Single-Phase AC Inverter – Expandable Solar Energy Solution The Fox Hybrid Single-Phase AC Inverter combines high efficiency, flexible expansion, and smart monitoring to optimise your solar energy system. Compatible with Cube & EP5/11 batteries, this inverter is perfect for residential and small commercial installations. Key Features Easy Installation Quick and straightforward setup for hassle-free integration. High Voltage & Dual MPPT Dual MPPT design ensures maximum solar energy production. High round-trip efficiency of 97% maximises energy savings. Remote Monitoring Monitor your system in real-time via Wi-Fi for performance tracking and updates. Durable & Weatherproof IP65-rated for indoor and outdoor installation. What’s Included CT Clamps Wi-Fi Stick Additional Requirements Second CT clamp for additional generator sets (PV, wind, or others). Energy meter between inverter and incoming power connection if the distance exceeds 30m. Technical Specifications Weight: 23 kg Rated Power: 6,000 W Minimum MPPT Voltage: 80 V Maximum MPPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Maximum Input Voltage: 600 V Max DC Power (5 minutes): 9,000 W Max AC Power (5 minutes): 6,000 W Surge AC Power (1 second): 6,600 W Maximum DC Current: 32 A Maximum DC Inputs: 2 Connector Type: MC4 (4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years Why Choose the Fox Hybrid Inverter? The Fox Hybrid Single-Phase AC Inverter delivers reliable, efficient, and scalable solar power management. Its high voltage design, dual MPPT, and remote monitoring capabilities make it an ideal choice for homeowners and businesses looking to expand their solar energy systems while maximising efficiency and savings. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 6000W Home Wave Inverter - Three Phase   #1: SE-6000-3PH-NET Inverters - Main Units SolarEdge 6000W Data Sheet SolarEdge 6000W Manual SolarEdge 600W G100 Certificate SolarEdge 6000 3-Phase Inverter – SetAPP Function (No Display) The SolarEdge 6000 3-phase inverter delivers advanced digital control technology and a highly efficient single-stage power conversion architecture for superior solar energy harvesting. Designed for commercial and residential PV systems, this inverter ensures maximum performance, reliability, and flexibility. Please Note: This inverter has no integrated trackers and requires SolarEdge Power Optimizers to function. UK installations must use the latest firmware version (update via the SetAPP during commissioning) to comply with G98/G99 standards. Key Features: Three-Phase Operation – stable and efficient power delivery for multi-phase systems SetAPP Commissioning – easy mobile app setup without a display Fixed-Voltage Technology – ensures optimal performance regardless of string length or module conditions Integrated DC Switch – safety and convenience built-in High Efficiency – 97.3% Euro efficiency for maximum energy yield UK Compliant – tested for G98/G99 when running latest firmware Technical Specifications: Weight: 16.4 kg Rated Power: 6,000 W Min PPT Voltage: 750 V | Max PPT Voltage: 900 V DC Startup Voltage: 0 V | DC Shutdown Voltage: 0 V Max Input Voltage: 900 V | Max DC Power: 10,000 W Max AC Power (5 Minutes): 6,000 W | Surge AC Power (1 Second): 6,000 W Max DC Current: 10 A | Max DC Inputs: 2 DC Fuses: 0 | Connector Type: MC4 | Included Connectors: 0 MPPT Quantity: 0 Transformer: None Warranty: 12 years The SolarEdge 6000 3-phase inverter is an ideal solution for reliable, high-efficiency solar power conversion when paired with SolarEdge Power Optimizers, delivering consistent energy output with long-term peace of mind.

SolarEdge 9000W Home Wave Inverter - Three Phase   #1: SE-9000-3PH-NET Inverters - Main Units SolarEdge 9000W Data Sheet SolarEdge 9000W Manual SolarEdge 9000W G100 Certificate SolarEdge Warranty SolarEdge 9000 3-Phase Inverter – High-Efficiency Solar Power Solution The SolarEdge 9000 3-Phase Inverter delivers superior solar power harvesting with a compact, efficient, and highly reliable design. Perfect for residential and light commercial solar installations, it works seamlessly with power optimisers to maximise energy production from each solar module. Key Features Fixed-Voltage Technology Ensures the inverter always operates at the optimal input voltage, regardless of string length or environmental conditions, for maximum efficiency and reliability. Optimiser-Ready Design This inverter requires SolarEdge power optimisers to function, enabling module-level performance monitoring and enhanced safety. Smart App Integration Compatible with SetAPP commissioning for easy configuration and monitoring. UK certified for G98 and G99 compliance (firmware must be updated during commissioning). Compact & Lightweight At 16.4 kg, the inverter is easy to install, even in tight spaces. Advanced Safety Features Integrated DC switch No trackers, simplifying maintenance and reducing potential points of failure Technical Specifications Rated Power: 9,000 W Phases: 3 Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max DC Power: 9,450 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,000 W Max DC Current: 12 A Max DC Inputs: 2 Connector Type: MC4 Euro Efficiency: 97.4 % MPPT Quantity: 0 Transformer: None Weight: 16.4 kg Warranty: 12 years Why Choose the SolarEdge 9000? With high efficiency, robust UK compliance, and seamless SetAPP commissioning, this inverter is an ideal choice for installers seeking reliable, high-performing 3-phase solar solutions.

Fox ESS 12.0kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-12.0 Inverters - Main Units Fox T Series 12.0kW Datasheet Fox T Series 12.0kW Install Guide Fox T Series 12.0kW Warranty Fox T Series 12.0kW G99 Certificate   FoxESS T Series 12kW 3-Phase Inverter – Reliable and Scalable Energy Solution The FoxESS T Series is a high-performance 3-phase hybrid inverter, ideal for residential homes and small commercial installations. Designed for flexibility and efficiency, the T Series supports dual MPPT ranges from 6.0 kW to 25.0 kW, enabling optimal solar energy harvest for varying PV configurations. Key Features: Plug-and-Play Installation: Quick and hassle-free setup IP65 Rated: Suitable for outdoor installations Remote Monitoring: Manage your system from the FoxESS Cloud High Efficiency: 98.6% round-trip efficiency for minimal energy loss Dual MPPT: Ensures maximum power extraction from your solar array Technical Specifications: Weight: 17 kg Rated Power: 12,000 W MPPT Voltage Range: 140 – 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 12,000 W Surge AC Power (1 Second): 13,200 W Max DC Current: 14 A Max DC Inputs: 2 DC Fuses: 2 Connector Type: MC4 (2 included) Euro Efficiency: 97.8% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years The FoxESS T Series 12kW inverter provides scalable energy storage options and high-performance solar integration, making it a reliable choice for efficient, future-proof solar systems. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 5,000W Home Hub Inverter with Whole Home Backup Potential 1PH #1: SE-5000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge 5,000W Datasheet SolarEdge 5,000W Manual SolarEdge 5,000W G99 Certificate SolarEdge Home Hub Inverter – Storage & Backup Ready The SolarEdge Home Hub Inverter is the ultimate home energy manager, controlling PV production, battery storage, and backup operation during power outages (additional hardware may be required). Designed for modern smart homes, it provides full visibility of PV production, battery status, and self-consumption data, while enabling a scalable solution for future energy needs. Key Features Record-breaking Efficiency: 99% weighted efficiency with up to 200% DC oversizing Compact & Lightweight: Easy to install at just 12 kg Advanced Safety: Integrated arc fault protection for safe operation Scalable & Smart: Supports module-level monitoring, battery integration, and connection to a growing ecosystem of smart energy products Compatible with Octopus: Optimise charging and discharging for cost-effective energy management Warranty: 10 years standard, extendable up to 25 years Technical Specifications Rated Power: 5,000 W Phases: 1 MPPT Trackers: 2 Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 10,000 W Max AC Power (5 min): 5,000 W Surge AC Power (1 sec): 5,000 W Max DC Current: 13.5 A Max DC Inputs: 2 DC Fuses: None Connector Type: MC4 Euro Efficiency: 99 % Transformer: None Integrated DC Switch: No Weight: 12 kg Ideal for homeowners looking for efficient, reliable, and scalable energy management, combining solar production, battery storage, and backup functionality in one compact unit. Requires the SolarEdge Backup Interface for the Backup function to work.

EcoFlow PowerOcean:  1ph Inverter Smart Home Energy    #3: 6861 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-98 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Take control of your energy future with the EcoFlow PowerOcean 3.68kW Hybrid Inverter—a powerful and intelligent solar inverter designed for modern UK households. Combining high-efficiency solar energy conversion, advanced lithium iron phosphate (LFP) battery compatibility, and industry-leading safety features, PowerOcean is your foundation for power independence. Whether you’re powering a compact flat or a large residential property, EcoFlow PowerOcean offers unmatched scalability, reliability, and control through the EcoFlow App and Web Portal. Enjoy seamless energy monitoring, battery management, and solar optimisation—all from your smartphone. Key Features Scalable Battery Storage: Expandable up to 15kWh with over 6,000 charge cycles for long-term reliability. Smart Monitoring: View real-time power usage, solar input, and battery status via the EcoFlow App and Web Portal. Advanced Safety Features: Built with LFP battery tech, a fire prevention module, and IP65-certified weatherproof housing. 15-Year Warranty: Confidence backed by a long-term manufacturer guarantee. Plug-and-Play Expansion: Future-proof design ensures easy upgrades with additional battery modules. Technical Specifications DC Attributes Max PV Power: 3.68kW Max Voltage: 600V Max Isc (Short Circuit Current): 20A Max Current (per MPPT): 18A (1x PV input) 16A (2x PV input) No. of MPPTs: 2 MPPT Voltage Range: 90–520V AC Attributes Max AC Output Power: 3.68kW Max Current: 18.4A Number of Phases: 1 System Information Max Efficiency: 96.5% IP Rating: IP65 (Dust-tight & weatherproof for outdoor use) Weight: 20.6kg Dimensions: 679.6 × 182.7 × 280mm What's In the Box? 1 x EcoFlow PowerOcean 3.68kW single phase hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 3.68kW Inverter? If you’re a homeowner in the UK looking to reduce reliance on the grid, store more of your solar energy, gain reliable backup, and invest in a system that can grow with you, the EcoFlow PowerOcean 3.68 kW Single Phase Hybrid Inverter is a strong choice. Its combination of smart tech, safety features and scalability make it more than just a basic inverter—it’s a long‑term energy platform.

Sunsynk ECCO 5Kw Hybrid Inverter solar & wind Inverter #2: SUN-5.0-ECCO Storage Systems - Hybrid Inverter Sunsynk 5Kw Data Sheet Sunsynk 5Kw Installation Manual Sunsynk 5Kw Warranty Sunsynk 5Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk 5kW ECCO Hybrid Inverter – Smart Energy Management for Homes & Businesses The Sunsynk 5kW ECCO Hybrid Inverter is a powerful and compact energy solution designed to optimise solar generation, reduce grid reliance, and unlock savings through smart energy management. With API integration for Octopus Agile & Flux tariffs, this hybrid inverter allows you to buy electricity at cheaper off-peak rates and even sell excess energy back to the grid through SEG (Smart Export Guarantee) payments. It’s the perfect choice for modern households and businesses looking to take full control of their energy flow. Key Features & Benefits ⚡ Advanced Power Management Dual MPPT design for optimised solar efficiency. Seamlessly manages power from solar panels, the grid, and generators. Zero export function for regulatory compliance. 📱 Smart Monitoring & Control Built-in Wi-Fi logger and CT for real-time monitoring. Remote access via Sunsynk App and SolarMan App. Automatic Grid-Tied to Off-Grid switching for uninterrupted power supply. 🔋 Flexible & Scalable Energy Storage Compatible with most Lithium-ion and Lead Acid batteries. Parallel up to 16 units with matching firmware for larger systems. Separate Essential and Non-Essential load outputs for smarter energy allocation. 🌦 Durable & Reliable IP65-rated for indoor and outdoor installations. Compact design with the full power of previous Sunsynk models. High Euro efficiency of 96.5% for cost-effective energy conversion. Technical Specifications Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 min): 5,500 W Surge AC Power (1 sec): 11,000 W Max DC Current: 22 A Max DC Inputs: 2 DC Fuses: None Connector Type: MC4 Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Why Choose the Sunsynk 5kW ECCO Hybrid Inverter? Save money by buying cheap off-peak electricity and selling excess back to the grid. Seamless integration with Octopus Agile & Flux tariffs. Future-proof design with parallel expansion up to 16 units. Smart monitoring for total visibility and control. Reliable and efficient with IP65 protection for indoor/outdoor use. Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

SolarEdge 8kw Three Phase on grid 8,000W solar Inverter   #1: SE-8000-3PH-NET   SolarEdge 8kW 3-Phase Inverter – Network Ready (SE-8000-3PH-NET) The SolarEdge 8kW 3-Phase Inverter is a high-performance, network-ready inverter designed for commercial and large residential solar installations. It offers superior power conversion efficiency and advanced digital control technology, ensuring maximum energy harvest when paired with SolarEdge Power Optimizers. Key Features Power Optimizer Compatible: Requires SolarEdge Power Optimizers to function (no integrated MPPT trackers) High-Efficiency Conversion: One-stage inverter architecture ensures minimal energy loss Fixed-Voltage Technology: Maintains optimal input voltage for consistent performance, regardless of string length or environmental conditions SetApp Commissioning: Quick and easy setup using the SolarEdge SetApp via smartphone Compact and Lightweight: Ideal for indoor or outdoor installations UK Certified: Tested for G98/G99 compliance (latest firmware required for certification) Network Ready: Seamless integration with SolarEdge monitoring and home energy ecosystem No Display: Designed for remote monitoring and app-based control Technical Specifications Rated Power: 8,000 W Phases: 3 MPPT Quantity: 0 (requires power optimizers) Max DC Input Voltage: Refer to Power Optimizer specifications Weight: 19.6 kg Euro Efficiency: 99% Dimensions: Compact, wall-mountable Warranty: Manufacturer warranty (check SolarEdge terms) Installation Notes UK Only: Firmware must be updated during SetApp commissioning Qualified Installer Required: Must be installed according to local electrical regulations Monitoring: Use SolarEdge portal or mobile app to track energy production and performance ✅ The SolarEdge 8kW 3-Phase Network Inverter is the perfect solution for high-performance PV systems where module-level optimization and monitoring are required.

SolarEdge 8,000W Home Wave Inverter - Single Phase   #2: SE-8000H-NET-DT Storage Systems - Hybrid Inverter SolarEdge 8,000W Data Sheet SolarEdge 8,000W Manual SolarEdge 8,000W G99 Certificate SolarEdge 8kW Single Phase Inverter – Optimised HD-Wave Technology The SolarEdge 8kW Home Wave Inverter is a high-efficiency, single-phase solar inverter designed for modern residential installations. Optimised with HD-Wave technology, this inverter maximises energy harvest, simplifies installation, and integrates seamlessly with the SolarEdge Energy Bank Battery. Key Features Compatible with SolarEdge Power Optimisers – ensures optimal panel-level performance Quick smartphone commissioning via the SolarEdge SetApp 200% DC oversizing capability – supports larger PV arrays without efficiency loss Wireless connectivity to devices such as the SolarEdge Home Battery (via optional SolarEdge Home Network) Compact and lightweight design for easy indoor or outdoor installation Built-in module-level monitoring for real-time system visibility Fixed voltage inverter – allows for longer string designs Technical Specifications Rated Power: 8,000 W Phases: Single-phase (1PH) Weight: 16.5 kg Min PPT Voltage: 400 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 16,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,000 W Max DC Current: 20.5 A Max DC Inputs: 3 Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 99% MPPT Quantity: 3 Integrated DC Switch: Yes Transformer: None Warranty: 12 years Why Choose SolarEdge 8kW Inverter? The SolarEdge Home Wave Inverter combines industry-leading efficiency, smart monitoring, and scalable battery compatibility, making it the ideal choice for homeowners looking to maximize solar production, prepare for battery storage, and enjoy a future-proof energy system.

SolarEdge 8000W Home Wave Inverter - Single Phase Network Ready #1: SE-8000H-NET SolarEdge 8000W Data Sheet SolarEdge 8000W Manual SolarEdge 8000W Warranty SolarEdge 8000W G99 Certificate   SolarEdge 8kW Home Wave Inverter – Network Ready The SolarEdge Home Wave Inverter is a next-generation single-phase inverter designed for maximum efficiency and seamless integration with the SolarEdge ecosystem. Powered by HD-Wave technology, this inverter delivers optimized energy harvesting, reduced installation costs, and compatibility with the SolarEdge Home Battery and Power Optimizers. Key Features Specifically designed for SolarEdge Power Optimizers – ensures maximum solar output from every panel Quick commissioning via the SolarEdge SetApp on your smartphone 200% DC oversizing capability – handle larger PV arrays with confidence Seamless connectivity to the SolarEdge Home Network (optional) for integration with batteries and smart energy devices Compact, lightweight design for easy installation indoors or outdoors Built-in module-level monitoring for full system visibility Fixed voltage technology enables longer strings for design flexibility Compatible with the SolarEdge Energy Bank battery (8kW & 10kW models) Technical Specifications Rated Power: 8,000 W Phases: Single-phase (1PH) Weight: 16.5 kg Max Input Voltage: 480 V Max DC Power: 16,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,000 W Max DC Current: 20.5 A DC Inputs: 3 Connectors Included: 6 (MC4) Euro Efficiency: 99% Integrated DC Switch: Yes Transformer: None Warranty: 12 years Why Choose the SolarEdge Home Wave Inverter? With its industry-leading efficiency, smart connectivity, and future-proof design, the SolarEdge Home Wave Inverter is ideal for homeowners looking to maximize solar performance, reduce energy costs, and prepare for battery storage integration.

Solis inverter 25kW S5 3 Phase Triple MPPT - DC #1: SOL-S5-GC25K-DC #4: S5-GC25K-DC Solis 25kW Data Sheet Solis 25kW Manual Solis 25kW Warranty   Solis S5-GC25K – 25kW Three Phase Grid-Tied Inverter The Solis S5-GC25K is a high-performance, three-phase grid-tied inverter designed for commercial and industrial solar PV installations. With advanced features, robust construction, and precise MPPT control, it maximises solar energy generation while ensuring safety and reliability. ⚡ Key Features Rated Power: 25,000W with max AC output of 27.5kW High Efficiency: Max efficiency of 98.5%, Euro efficiency 98.1% Three MPPT Design: Reduces string mismatch with two DC inputs per MPPT Wide Voltage Range: Start-up voltage 180V, max PV input 1,100V Integrated Safety Features: DC reverse-polarity protection, Type-II surge protection, and AFCI (arc-fault circuit protection) IP66-Rated: Weatherproof for reliable outdoor installation Smart Monitoring: Compatible with SolisCloud for remote monitoring, diagnostics, and firmware upgrades Integrated DC Switch: Ensures safe maintenance operations 🔧 Technical Specifications Weight: 66 kg Rated Power: 25,000 W Min/Max PPT Voltage: 200–1,000 V DC Startup/Shutdown Voltage: 200/180 V Max DC Power: 37,500 W Max AC Power (5 min): 25,000 W Surge AC Power (1 sec): 27,500 W Max DC Current: 96 A DC Inputs: 6 Connectors: MC4 (12 included) Transformer: None Warranty: 5 years standard ✅ Why Choose Solis S5-GC25K? Ideal for commercial-scale solar installations, the S5-GC25K offers high efficiency, multiple MPPTs, and integrated safety features, making it a future-proof, reliable solution for maximising solar power output and system longevity.

EcoFlow PowerOcean:  5kW Inverter Smart Home Energy    #3: 6862 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-99 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Take control of your energy future with the EcoFlow PowerOcean 5kW Hybrid Inverter—a powerful and intelligent solar inverter designed for modern UK households. Combining high-efficiency solar energy conversion, advanced lithium iron phosphate (LFP) battery compatibility, and industry-leading safety features, PowerOcean is your foundation for power independence. Whether you’re powering a compact flat or a large residential property, EcoFlow PowerOcean offers unmatched scalability, reliability, and control through the EcoFlow App and Web Portal. Enjoy seamless energy monitoring, battery management, and solar optimisation—all from your smartphone. Key Features Proven safety system – Designed with advanced fire‑prevention module and thermal control. Each battery is monitored for stable performance. Durable battery technology – High‑grade Lithium Iron Phosphate (LFP) with more than 6,000 charge cycles and a 15‑year manufacturer warranty.  Outdoor‑ready – IP65 rated, the unit is dust‑tight and protected against low‑pressure water jets — ideal for garage, utility room or outdoor installation. Scalable capacity – Start small and expand later. This inverter is compatible with additional battery modules to support your energy demands and solar panel upgrades. Smart monitoring & tariff integration – The EcoFlow app and web portal has real‑time insights and supports dynamic tariffs (e.g. Octopus Agile & Flux). Charge when electricity is cheapest and discharge when you need it most. Wall or floor‑mounted: Slim & flexible design fits neatly in utility rooms or garages. Technical Specifications Max efficiency: 96.5%  Maximum PV input power: ~11 kW (depending on model) Maximum input voltage: 600 V DC Number of MPPTs: 2 MPPT voltage range: 90‑520 V Maximum input current per MPPT: 18 A (single PV input), 16 A (dual PV input)  AC output (single phase): 5 kW (max continuous) / ~25 A IP rating: IP65  Weight: ~20.6 kg (model variant ~21.5 kg) Dimensions (W×D×H): 679.6 × 182.7 × 280 mm  Battery Module Specifications Chemistry: Lithium Iron Phosphate (LFP) Usable cycles: 6,000+ when discharged to 70% capacity over 15 years Expandable capacity: Up to 15 kWh per inverter (single‑phase) and up to 45 kWh in multi‑inverter configurations. Depth of Discharge (DoD): ~95% — meaning more usable energy from the battery What's in the Box 1 x EcoFlow PowerOcean 5kW single‑phase hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 5kW Single Phase Inverter? UK households increasingly want energy independence: solar + battery solutions are now cost‑effective and reliable. With variable tariffs (time‑of‑use), solar self‑consumption and export optimisation become valuable – the PowerOcean supports this. The 15‑year warranty and high cycle life give long‑term peace of mind and align with typical UK home ownership timescales. Its robust outdoor rating means it can live outside the house in a garage/exterior wall — freeing up valuable indoor space.

Fox 7kW K Series Single Phase Hybrid Inverter 2: FE-KH1-7.0 Storage Systems - Hybrid Inverter #3 5986 Fox K Series 7kW Datasheet Fox K Series 7kW Manual Fox K Series 7kW Warranty Fox K Series7kW G100 Certification FoxESS KH7 7kW Single-Phase Hybrid Inverter The FoxESS KH7 is a sleek 7kW single-phase full hybrid inverter built with IP65 protection and high-voltage battery compatibility. Designed for maximum efficiency, it delivers a 97.4% round-trip efficiency, ensuring you get the best performance from your solar installation. Its triple MPPT design allows for optimal solar production even with panels on multiple roof orientations, while its expandable battery capacity makes it a flexible and future-proof solution. Key Features IP65 Rated – dust and water resistant, perfect for outdoor installation Remote Monitoring – manage and track system performance anywhere Expandable Storage – compatible with all Cube & EP5/11 batteries Triple MPPT Design – ensures maximum energy harvest from multiple arrays High Round-Trip Efficiency – up to 97% system efficiency Plug & Play Installation – supplied with CT clamps and meter for convenience Included in the Box CT Clamps Meter Technical Specifications Weight: 29 kg Rated Power: 7,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 minutes): 10,500 W Max AC Power (5 minutes): 7,000 W Surge AC Power (1 second): 7,700 W Max DC Current: 48 A Max DC Inputs: 3 DC Fuses: None Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 3 Integrated DC Switch: Yes Warranty: 5 years Why Choose the FoxESS KH7? The FoxESS KH7 inverter combines high efficiency, expandability, and smart monitoring in a compact design. It’s the ideal choice for homeowners and small businesses seeking to maximize solar production and ensure long-term reliability with flexible battery storage options. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10 kWh Three Phase on grid solar Inverter #1: SE-10000-3PH-APP Inverters - Main Units #4: SE10K-RW0TEBEN4 SolarEdge 10kWh Data Sheet SolarEdge 10kWh User Manual SolarEdge G98 Certificate   SolarEdge SE10K 10kW Three-Phase Inverter (SetApp, No Display) ⚠️ Important: This inverter has no MPPT trackers and requires SolarEdge Power Optimisers to operate. The SolarEdge SE10K three-phase inverter delivers advanced solar energy conversion with a streamlined, single-stage architecture. Designed to work exclusively with SolarEdge power optimisers, it ensures maximum system efficiency, safety, and reliability for residential and commercial installations. Thanks to fixed-voltage technology, the inverter consistently operates at its optimal input voltage, independent of string length or environmental factors. The SetApp configuration (via smartphone) replaces the traditional screen, offering a simple and modern commissioning process. 🔑 Key Features Requires SolarEdge Power Optimisers (not included) Modern SetApp commissioning (no screen required) Fixed-voltage technology for consistent efficiency One-stage power conversion for improved reliability High energy harvesting even in complex designs Integrated safety features, including DC switch Backed by a 12-year warranty (extendable options available) 📊 Technical Specifications Rated AC Power: 10,000 W Phases: 3 Euro Efficiency: 97.3% Minimum / Maximum Input Voltage (PPT): 750 V – 900 V Max DC Power: 15,500 W Max DC Current: 15 A Max Input Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V MPPT Trackers: 0 (optimiser required) DC Inputs: 2 Has Integrated DC Switch: Yes Weight: 17.6 kg Warranty: 12 years ✅ Perfect for larger residential or commercial PV systems where SolarEdge optimisers are used for maximum yield, module-level monitoring, and safety compliance.

Fox ESS 20.0kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-20.0 Inverters - Main Units Fox T Series 17.0kW Datasheet Fox T Series 17.0kW Installation Manual Fox T Series 17.0kW User Manual Fox T Series 17.0kW Warranty Fox T Series 17.0kW G99 Certificate Fox Battery Sizing Guide   Fox ESS T Series 3-Phase Hybrid Inverter – 20kW High-Efficiency Solution The Fox ESS T Series is a high-performance 3-phase inverter designed for residential homes and small commercial installations. With a dual MPPT range of 6.0 – 25.0 kW, it offers maximum flexibility for various solar PV configurations. Key Features: Easy Plug-and-Play Installation – quick setup for residential or commercial systems IP65 Rated – durable and suitable for outdoor installations Remote Monitoring – track system performance via FoxESS Cloud High Round-Trip Efficiency – 98.6% for optimal energy utilisation Technical Specifications: Weight: 20 kg Rated Power: 20,000 W Min PPT Voltage: 140 V | Max PPT Voltage: 1,100 V DC Startup Voltage: 140 V | DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V | Max DC Power: 30,000 W Max AC Power (5 Minutes): 20,000 W | Surge AC Power (1 Second): 22,000 W Max DC Current: 28 A | Max DC Inputs: 4 | DC Fuses: 4 Connector Type: MC4 | Included Connectors: 4 Euro Efficiency: 97.8% Transformer: None MPPT Quantity: 2 | Integrated DC Switch: Yes Warranty: 5 years The Fox ESS T Series 20kW inverter is ideal for efficient, reliable, and scalable solar energy systems, offering high performance and advanced monitoring capabilities for modern energy users. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox 8kW K Series Single Phase Hybrid Inverter #2: FE-KH1-8.0 Storage Systems - Hybrid Inverter Fox K Series 8.0kW Datasheet Fox K Series 8.0kW Manual Fox K Series 8.0kW Warranty Fox K Series 8.0kW G100 Certificate The FoxESS KH8 is a powerful and sleek 8kW single-phase full hybrid inverter, designed to deliver maximum efficiency and flexibility for UK solar PV systems. With support for high-voltage battery storage, triple MPPT design, and advanced monitoring via the FoxESS Cloud, it ensures optimal solar production and intelligent energy management. Engineered for long-term performance and easy installation, the FoxESS KH8 is the ideal choice for homeowners seeking to reduce grid reliance and expand energy storage capacity over time. Key Features ✅ Easy to Install – compact and user-friendly design ✅ IP65 Rated – weatherproof for indoor or outdoor use ✅ FoxESS Cloud Remote Monitoring – track and manage energy performance anywhere ✅ Scalable Battery Options – compatible with all FoxESS Cube & EP5/11 batteries ✅ Triple MPPT – maximises yield from different roof orientations ✅ High Round-Trip Efficiency – up to 97% for optimal energy use ✅ CT Clamps and Meter Included – everything you need in the box Technical Specifications General Weight: 29 kg Rated Power: 8,000 W Euro Efficiency: 97.4% Warranty: 5 years Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Connections Max DC Inputs: 3 Connector: MC4 (6 included) Has Integrated DC Switch: Yes DC Fuses: No Transformer: None MPPT Quantity: 3 Why Choose the FoxESS KH8 Hybrid Inverter? Designed with UK solar PV systems in mind Provides scalable storage options for future energy needs Offers reliable outdoor performance with IP65 protection Delivers high-efficiency solar conversion with triple MPPT Backed by 5-year manufacturer’s warranty for peace of mind ✅ The FoxESS KH8 is the perfect 8kW hybrid inverter for maximising solar energy, integrating flexible battery storage, and building a future-ready energy system. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10kw Single Phase HD Wave on grid solar Inverter #4: SE10000H-RW000BEN4 SolarEdge 10kW Single Data Sheet SolarEdge 10kW Single Manual SolarEdge 10kW Single Warranty SolarEdge 10kW Single G100 Certification   SolarEdge Single Phase Inverter – 10kW (HD-Wave) Product Overview The SolarEdge 10kW single phase inverter with HD-Wave technology is a cutting-edge solution designed to maximise energy harvest and system reliability. Compatible with SolarEdge power optimizers, it uses a simplified DC-to-AC conversion topology for higher efficiency, reduced size, and lighter weight. The inverter is ideal for residential solar PV systems seeking top-tier performance and ease of installation. Key Features HD-Wave Technology – Latest generation inverter design, delivering record-breaking 99% efficiency. SetApp Commissioning – Inverter can be configured quickly via smartphone without a display. Optimiser-Based MPPT – Simplifies inverter design, improves reliability, and maintains peak efficiency regardless of string length or temperature. Award-Winning Design – Winner of the 2016 Intersolar Award and 2018 Edison Award. Extended Warranty Options – Standard 12-year warranty, extendable to 20 or 25 years. Specifications Weight: 16.5 kg Rated Power: 10,000 W Max Input Voltage: 480 V Max DC Power: 20,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,000 W Max DC Current: 25.5 A Number of MPPTs: 0 (handled in optimisers) DC Inputs: 3 DC Fuses: None Connector Type: MC4 (6 included) Integrated DC Switch: Yes Euro Efficiency: 99% Transformer: None Phases: Single Phase Warranty: 12 years (extendable) This inverter is perfect for homeowners looking for a high-efficiency, award-winning solar inverter that integrates seamlessly with SolarEdge optimisers and offers straightforward smartphone-based commissioning.

SolarEdge 10,000W Home Wave Inverter - Three Phase   SolarEdge 10kW 3-Phase Inverter – Network Ready, SetApp Enabled The SolarEdge SE-10000-3PH-NET inverter is a high-efficiency, network-ready 3-phase inverter designed for commercial and larger residential solar PV systems. Built with fixed-voltage technology and digital control architecture, it ensures maximum energy harvest while maintaining best-in-class reliability. Please note: This inverter does not include an integrated display and requires SolarEdge Power Optimizers to function. Key Features: High Efficiency: Advanced power conversion architecture for superior solar harvesting Fixed-Voltage Technology: Ensures optimal input voltage for consistent energy output SetApp Enabled: Quick and easy commissioning using the SolarEdge SetApp Network Ready: Seamless integration for system monitoring and performance tracking UK Compliant: Tested to G98/G99 standards with latest firmware Compact & Reliable: Durable design for long-lasting operation Technical Specifications: Part Number: SE-10000-3PH-NET Rated Power: 10,000 W Phases: 3 MPPT Trackers: None (requires Power Optimizers) Weight: [Add weight if known] Firmware Update Required: Yes, during SetApp commissioning Warranty: [Add warranty if available] Ideal for installers and system owners seeking a robust, network-enabled 3-phase inverter solution for large solar PV arrays, with all the benefits of SolarEdge monitoring and optimization.

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 8kW #2: X3-FIT-8#3: 4748 Solax X3 8kW Inverter Data Sheet Solax X3 8kW Inverter User Manual Solax X3 8kW Inverter Warranty Solax X3 Inverter G99 Certification SolaX X3-FIT Series 3-Phase AC Coupled Hybrid Inverter Product Overview The SolaX X3-FIT Series is a fourth-generation, 3-phase AC coupled hybrid inverter designed for maximum solar energy utilisation. This retro-fit inverter directs excess solar energy into your battery for later use and can act as a backup power supply during grid outages, sending stored energy back to your home. Key Features Virtual Power Plant (VPP) Function Supports VPP integration for smart energy management Emergency Power Supply (EPS) Switchover time <10ms Provides up to 150% output for 60 seconds during power loss Flexible Energy Management Max. 110% nominal apparent AC power Flexible peak shaving for optimised energy use Optional three-phase unbalanced output Connectivity Compatible with WiFi V2.0 for SolaX Cloud monitoring WiFi stick required for remote monitoring Installation Notes For G100 applications, a software update is recommended Recommended use with SolaX CHINT three-phase CT energy meter Collections are not permitted due to health & safety regulations Technical Specifications AC Attributes Max power: 8,800 W Max current: 12.9 A Number of phases: 3 System Max efficiency: 98% IP rating: IP65 Dimensions & Weight Dimensions (H x W x D): 503 x 503 x 199 mm Weight: 30 kg

EcoFlow PowerOcean 6kW Single Phase Hybrid Inverter #3: 6863 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-99 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Big or Small Power your home smarter with the EcoFlow PowerOcean 6kW 1ph Hybrid Inverter – a scalable, intelligent and future-proof solar battery system for UK households. Combining advanced safety features, high-efficiency performance, and real-time smart monitoring, it’s the ultimate solution for homes looking to reduce reliance on the grid and cut energy costs. From compact city flats to large family homes, the PowerOcean is built to adapt. Its plug-and-play expandability makes future upgrades effortless, supporting your journey towards full energy independence. Key Features 15-Year Warranty & 6,000+ Charge CyclesEnjoy peace of mind with a long-lasting system backed by EcoFlow’s 15-year limited warranty and durable LFP battery technology. Expandable Storage Capacity – Up to 15kWhBegin with the capacity you need today, and expand effortlessly as your energy use grows – perfect for EV charging, heat pumps, or future solar panel upgrades. Advanced Safety SystemEquipped with built-in fire prevention, thermal management, and battery protection systems for maximum safety in residential environments. IP65 Certified for Indoor & Outdoor UseRugged and weather-resistant – install in your garage, utility room, or even outside. Smart App & Web Portal MonitoringTrack solar input, battery usage, and energy consumption in real-time using the EcoFlow app or web dashboard – compatible with agile energy tariffs for greater savings. Technical Specifications Max AC Power Output: 6kW Max AC Current: 30A AC Phases: Single-phase Max PV Input Power: 12kW Max PV Input Voltage: 600V Max PV Input Current: 18A (1 x input) 16A (2 x input) MPPT Tracking Inputs: 2 MPPT Voltage Range: 90-520V Max PV Short Circuit (Isc) 20A Max Efficiency: 96.5% IP Rating: IP65 (dust/waterproof) Weight: 20.6kg Dimensions:  (W×D×H): 679.6  ×  182.7  x 280mm   Battery Module Specifications Chemistry: LiFePO4 Lithium Iron Phosphate (LFP)  Usable cycles: 6,000+ when discharged to 70% capacity over 15 years Expandable capacity: Up to 15 kWh per inverter (single‑phase) and up to 45 kWh in multi‑inverter configurations. Depth of Discharge (DoD): ~95% — meaning more usable energy from the battery What's in the Box 1 x EcoFlow PowerOcean single‑phase 6kW hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 6kW Single Phase Inverter? Whether you're looking to save on bills with solar self-consumption or want a reliable backup during power outages, the EcoFlow PowerOcean delivers: Works with or without solar panels Provides backup during grid outages (essential loads) Maximises solar energy use with dual MPPT tracking Optimises usage with real-time tariff integration (e.g. Octopus Agile)