Most Popular (35)

Pylontech US5000 -1C 4.8kWh Li-Ion Solar Battery 48V (excl. brackets) #2: PYLON-US5000-1C Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.      US5000-1C Datasheet US5000-1C Installation Manual US5000-1C Warranty US5000-1C Compatibility Sheet To view complete kits please visit our Pylontech main page The Pylontech US5000-1C offers upgraded firmware and increased operation logic from 0.8C to 1.0C. When adding the Pylontech US5000-1C to an existing stack of US5000 then the US5000-1C will need to be the master master. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 Long cycle life and superior performance Compatible with tier 1 inverter brands Please note: To activate the extended warranty it must be registered online via this link: http://en.pylontech.com.cn/service/support Specs Supplier Part No: US5000 1C Weight: 40.4 kg Rated Power: 5,000 Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W IIn accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer. Buy Pylontech US5000 here lowest prices.  

PylonTech US3000C 3.5kWh Li-Ion Solar & wind Battery Storage D.O.D of 95% Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.  #2: PYLON-US3000C #4: US3000C#17: Pylon 3.5kwh US3000 C Li-ion Battery US3000C Datasheet US3000C Installation Manual US3000C Warranty   To view complete Pylon kits please visit our Pylontech main page Battery to battery connecting cables included as standard The next generation of affordable, reliable storage has arrived. Pylontech's US2000B and US3000 batteries have been a frequent choice for prudent installers who value reliability, wide compatibility and ease of use. Now Pylontech have released an enhanced version of both 2.4kWh and 3.5kWh Li-ion units with impressive features. In a nutshell the new US2000C and US3000C batteries offer a higher depth of discharge - now a staggering 95% - and 16 units can be installed in parallel - double the capacity than before!The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.The Pylontech US3000C has an incredible DoD of 95%.Advantages- Vertical industry integration ensures cycle life of 6000 cycles- Compact and fashionable design fits in your home environment- Deliver up to 3.5kW* with single module (3.5kWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.8kW per battery- Modular design gives the end customers the power of choice of capacity- Compatible with large number of Hybrid inverters- Simple buckle fixing minimize the installation time and cost- Provides pre-charge function to protect ESS system from surge current.- Up to 16 units can be stacked in parallelTo extend the warranty you have to register here: http://en.pylontech.com.cn/service/supportThe US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank. * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries ahave been insatlled by an electrician or authorised installer.

 Duracell solar battery Dura5 IP65 5.12kW LiFePO4 Battery #5: PD-5KWH-50V-2G-IP65 Duracell5 Data Sheet   *Please note that Dura5 batteries are not compatible with Dura5+ or Puredrive batteries. Wall mounted or floor standing Cables included for connecting to Hybrid inverter and for battery to battery. For a complete system with the right hybrid inverter for you please visit the Duracell page Battery to Battery communication cable & power cables is 1.7m. Boost your battery performance and your return on investment with quality technology from Duracell Energy. Combining an ultra high-performing battery with a super smart app, this 5.12kWh storage battery is a high-tech solution and offers a quick payback. With a superb battery life and fast charging rates you're future-proofed to maximise your investment. With a sleek, smart design, this solar battery is built for both elegance and performance. It's easy to install inside your home, and with a simple, modular format, you can easily expand capacity to gain more energy independence or as your needs change. Through the Duracell Energy smart app, you can manage all your renewable products and maximise your cost savings by integrating your solar power system, battery storage and EV chargers, as well as your time-of-use energy tariffs. Key features: High-performing solar storage battery For installing inside your home Add additional batteries at any time to create a modular system of up to 32 units Duracell Energy smart app to manage your home energy system and maximise your cost savings Ready to plug and play with all cables included 1C/1C charge and discharge Master BMS autoselect Battery module energy: 5.12kWh Useable energy: 4.6kWh Max output power: 100A Dimensions: 490mm (W) x 90mm (D) x 675mm (H) Weight: 45kg Ingress protection rating: IP65 10-year warranty

Aiko Nebular 2P 445W N-Type ABC, 54 Cell, Black Frame #2:AIK-A-MAH54-445-TM  Panels - Monocrystallines Aiko 445W Datasheet Aiko 445W Installation Manual Aiko MCS Certificate  Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Aiko Monocrystaline N-type ABC  For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features 2023 Winner of Intersolar Innovation Award 2023 Red Dot Design Award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Specs Weight: Rating: 8.6kg Rated Power: 445 W Efficiency: 22.3% Width: 1,134 mm Depth: 30 mm Length: 1,762 mm VMPP: 34.44 V IMPP: 12.93 A Isc: 14.02 A Voc: 40.88 V Temp. Coefficient (Mpp):-0.26 % Clamp position on panel: Long and short side Connector: EVO2    

  Aiko Neostar 2S+ 460W Dual Glass All Black ABC N-Type Mono #3: 6788 Aiko 460W Datasheet Aiko 460W Warranty Minimum order for this panel: 1 panel. Aiko Neostar 2S ABC  N-type Mono Aiko's Neostar 2S+ Dual-Glass 460W panels has a 23.1% efficiency rating. These sophisticated panels are sleek and stylish, with a blacked-out design and a bezel-less edge. Aiko's Neostar 2S+ Dual-Glass panels provide high efficiency, making them the perfect choice for homeowners seeking top-tier performance and aesthetics. Ideal for residential installations. For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features 2023 Winner of Intersolar Innovation Award 2023 Red Dot Design Award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Specs Weight: 24.2kg Rated Power: 460 W Efficiency: 23.1% Width: 1,134 mm Depth: 30 mm Length: 1,757 mm VMPP: 34.62 V IMPP: 13.29 A Isc: 14.25 A Voc: 41.06 V Temp. Coefficient (Mpp):-0.26 % Clamp position on panel: Long and short side Connector: EVO2 Product Warranty: 15 Years Performance Warranty: 30 Years  

AIKO Neostar 2P 470W N-Type ABC, 54 Cell, Black Frame 2 AIK-A-MAH54-470-BF-G2 Panels - Monocrystallines Aiko 470W Datasheet Aiko 470W Installation Manual Aiko 470W Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel Aiko Monocrystaline N-type ABC Comet For not much more cost than budget panels you not only get the highest efficiency modules on the market at around 23% and with 15 yr product warranty & 30yr performance warranty but also 2 very unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features 2023 Winner of Intersolar Innovation Award 2023 Red Dot Design Award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Specs Weight: Rating: 21.5kg Rated Power: 470 W Efficiency: 23.6% Width: 1,134 mm Depth: 30 mm Length: 1,757 mm VMPP: 33.9 V IMPP: 13.87 A Isc: 14.51 A Voc: 40.89 V Temp. Coefficient (Mpp):-0.26 % Clamp position on panel: Long and short side Connector: EVO2 Product Warranty: 15 Years Performance Warranty: 30 Years

510W Aiko Neostar 2S N-Type ABC, 60 Cell, All Black, Gen 2 #2: AIK-A-MAH60-510-AB-G2 Panels - Monocrystallines Aiko 510W N Type Datasheet Aiko 510W N Type Installation Manual Aiko 510W N Type Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panels. Aiko Neostar 2s N-type ABC, 60 Cell, All Black, Gen 2 AIKO All-Black 60-cell gen 2 panels are a result of cutting-edge technology and deliver a 23% efficiency rate. These panels have a sleek look with a blacked-out effect and bezel-less edge enhancing the style of the overall panel design. AIKO's 60 cell panels are best suited for residential homes that want the highest efficiency available. Two unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features 2023 Winner of Intersolar Innovation Award 2023 Red Dot Design Award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Product Warranty: 25 Years Performance Warranty: 30 Years Specs Weight: Rating: 24 kg Rated Power: 510 W Efficiency: 22.8% Width: 1,134 mm Depth: 30 mm Length: 1,954 mm VMPP: 38.1 V IMPP: 13.39 A Isc: 14.17 A Voc: 45.22 V Temp. Coefficient (Mpp): -0.26 % Clamp position on panel: Long and short side Connector: EVO2 Cable Length: 1.2m

Aiko Stellar 1N+ 645W N-Type ABC, 72 Cell, Silver Frame, Dual Glass #2: AIK-G-MCH72-645-SF-DG  Panels - Monocrystalline   Aiko 645W Datasheet Aiko 645W Installation Manual  MCS Certification    Aiko 645W Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Delivery Due to the panel size and gap between the slats of the pallets either a fork lift truck is required on-site to offload these modules or they need to be hand lifted off by the customer. Aiko Stellar 1N+ N-Type ABC, 72 Cell, Silver Frame, Dual Glass A commercial panel with a very high efficiency of 23.9% giving investors a faster ROI. The series is also aesthetically pleasing with an elegant design. Two unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features Winner of 2023 intersolar innovation award, Winner of 2023 Red dot design award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Product Warranty: 15 Years Performance Warranty: 30 Years Specs Weight: 33.5kg Dimensions: 2,382 L x 1,134 W x 30 D (mm) VMPP: 45.2 V IMPP: 14.27 A Isc: 15 A Voc: 53.9 V Temp. Coefficient (Mpp): -0.26% Cable Length: 1.4m  Connector: MC4 EVO2 Clamp position on panel: Long side only Connector Type: EVO2 Efficiency: 23.9% Pallet Size: Oversized    

405W Maxeon Sunpower 6 All Black Solar panel #20: SPR-P6-405-BLK SunPower 405W Data Sheet SunPower 405W Manual SunPower 405W Warranty Minimum order for this panel: 1 panels. Delivery time for these panels: 3-4 business days, please ensure you select a date at checkout at least 3 days from ordering Note: These panels are not available to purchase as part of PV system, otherwise a separate pallet delivery will needs to be added for mounting.   Enhanced Power DensityWith high efficiency, LID-resistant solar cells (G12, 210mm), a lower temperature coefficient, and front-side conductive wires that support increased current collection, SunPower Performance panels are uniquely engineered to deliver more lifetime energy over standard solar panels. Proven ReliabilityA proprietary shingled-cell design maximises durability in all types of weather conditions—including reinforced cell connections that withstand the stresses of daily temperature swings, redundant electrical paths that alleviate the impact of cell cracks, and an advanced electrical architecture that is more resilient to the effects of shade and mitigates hot-spot formation.

410W Maxeon 6 Sunpower All Black Solar panel #20: SPR-P6-410-BLK SunPower 410W Data Sheet SunPower 410W Manual SunPower 410W Warranty   Minimum order for this panel: 1 panels. Delivery time for these panels: 3-4 business days, please ensure you select a date at checkout at least 3 days from ordering Note: These panels are not available to purchase as part of PV system, otherwise a separate pallet delivery will needs to be added for mounting. 410W Maxeon 6 Sunpower - Enhanced Power DensityWith high efficiency, LID-resistant solar cells (G12, 210mm), a lower temperature coefficient, and front-side conductive wires that support increased current collection, SunPower Performance panels are uniquely engineered to deliver more lifetime energy over standard solar panels. 410W Maxeon 6 Sunpower - Proven ReliabilityA proprietary shingled-cell design maximises durability in all types of weather conditions—including reinforced cell connections that withstand the stresses of daily temperature swings, redundant electrical paths that alleviate the impact of cell cracks, and an advanced electrical architecture that is more resilient to the effects of shade and mitigates hot-spot formation.

SolaX X1-IES 3.7kW 1ph Hybrid Inverter + 5kWh TP-HS50E Li-ion Battery - Bundle #3: 6664#6640 X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report This offer consists of:  1 x 3.7kW single phase hybrid inverter 3 x 5kWh battery This INTEGRATED All In One residential ESS comes with a 3.7kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.   Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 730 x 1554 x 210mm Warranty: 10 years standard Specs: Combined Weight: 207.6 kg Rated Output Power: 3,700 W Max PV Power: 7.4kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 3,680W AC Output Current: 16.0A Max DC Current:  50 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

SolaX X1-IES 6.0kW 1ph Hybrid Inverter + 5kWh TP-HS50E Li-ion Battery - Bundle #3:  6665#6644 X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report   This offer consists of:  1 x 6kW single phase hybrid inverter 3 x 5kWh battery This INTEGRATED All In One residential ESS comes with a 6kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.  Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 730 x 1544 x 210mm Warranty: 10 years Specs: Rated Power: 6,000 W Max PV Power: 7.4kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 3,680W AC Output Current: 16.0A Max DC Current:  50 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

SolaX X1-IES 8.0kW 1ph Hybrid Inverter + 5kWh TP-HS50E Li-ion Battery - Bundle #3:  6673#6648 X1-IES+Batt SolaX X1-IES 1ph Hybrid Inverter Datasheet SolaX X1-IES 1ph Hybrid User Manual Part 1 SolaX X1-IES 1ph Hybrid User Manual Part 2 SolaX X1-IES 1ph Hybrid Installation Guide Part 1 SolaX X-IES 1ph Hybrid Installation Guide Part 2 SolaX X-IES 1ph Hybrid Installation Guide Part 3 SolaX X1-IES 1ph Hybrid Inverter G100 Report   This offer consists of:  1 x 8kW single phase hybrid inverter 3 x 5kWh HS50E Battery This INTEGRATED All In One residential ESS comes with a 8kW hybrid single-phase inverter and extensible battery modules with a capacity from 5 - 20kWh. With excellent performance in economy, safety and robustness, it also has other functions such as VPP, micro-grid, smart schedule and smart scene.  Features: Plug and play - easy to install High Performance - cycle life > 6000 times Smart Load Management (heat pump, smart EV charger etc.) Micro-grid support for real-time grid/off-grid balancing Wireless meter compatibility IP66 rated Dimensions: 730 x 1544 x 210mm  Warranty: 10 years Specs: Weight: 207.6 kg Rated Power: 8,000 W Max PV Power: 16.0kWp Max PV Voltage: 600 V Startup Voltage: 50 V Min PPT Voltage: 40 V Max PPT Voltage: 560 V  AC Output Power: 8,000W AC Output Current: 34.8 A Max Efficiency: 97.6 % MPPT Quantity: 2 Please check the warranty document for more information

Myenergi EDDI Energy Diverter #2: MYEN-EDDI-16A1P02H Eddi 2.1 Data Sheet Eddi 2.1 Installation Manual Eddi 2.1 User Manual Collections are not permitted due to health & safety regulations The My Energi Eddi is a remarkable and effective energy saving device. Eddi Diverts surpluses power from your solar energy system and uses it to heat your water or rooms. This helps you to save energy and minimise your utility bills. Compatible will all renewable generation technologies and easy to install. My energy are market leaders driven by continues development and sustainable solutions. Internet connected & remote controllable, Works with heat pumps (when used with optional Relay & Sensor Board), 3 Year Warranty Eddi Feautures: 3.68kW / 16A max heater load Expansion module option – 2 extra outputs with temperature control Integral bypass switch Graphical back-lit LCD screen for ease of use Fan-less cooling Built-in programmable boost timers VariSineTM PWM technology Supports two heaters (sequentially) Wall mounting bracket for ease of installation Overload and short-circuit protection Ethernet port and built-in WiFi for connecting to the internet Complies with CE and UKCA Requirements Works alongside battery storage systems Energy monitoring on the go via the myenergi app

GivEnergy All In One - 13.5 kW with Gateway for backup #2: GIV-AIO-PACKAGE#3: 5128#5: GivEnergy All-In-One 13.5kWh with Gateway GivEnergy 13.5 KW AIO Datasheet GivEnergy Gateway Datasheet GivEnergy Brochure GivEnergy Installation Manual GivEnergy G99 Certificate GivEnergy G100 Certificate GivEnergy Full Schematics GivEnergy Welcome Pack The GivEnergy All in One is a one of a kind home battery and inverter – unrivalled for power and price point. Meanwhile, the Giv-Gateway protects supply and keeps properties running during power cuts. The GivEnergy All In One AC coupled system has many advantages. With 7.2kW peak power, the charge and discharge rate of these batteries helps better take advantage of agile tariffs. Alongside this, the system is complete with a substantial 13.5kWh useable battery pack and allows for 100% Depth of Discharge. With inbuilt isolator, CT clamp, metering, switchgear, and a gateway requiring no additional distribution board; there's little to fit and minimal wiring. Above all else, the all in one unit has a fantastic premium look and a good deal of capacity, at a very affordable price. Kit Includes: GivEnergy All in One GivEnergy Gateway With the additional GivEnergy Gateway, the All in One can provide whole house backup in the event of a power failure. Mulpitple systems in parallel not yet available The Giv-Gateway provides seamless switching between grid and battery ensuring that your property is always powered. Giv-Gateway also facilitates a connection point for your solar PV system by allowing it to continue to generate energy even without a grid supplyGrid Services ReadyEnergy suppliers and aggregators are offering payments for end users that can reduce their electrical consumption at certain times.Pre-Installed EM115 MeterQuicker and simpler system installation, which reduces the number of individual mounted components needed20ms Switchover TimeUniterrupted supply in the event of a power failure, to ensure all critical loads are stable.Built-In LoRaUses Radio frequency to transmit the Grid meter data back to the inverter, which allows the system to be installed remotely without a cable.  

GivEnergy Gen3 - 5.0kW Hybrid with 9.5kWh Gen 3 Solar Battery Storage #2: GIV-5.0K-G3-9.5-G3-WG   - PV and Storage Package GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart  GivEnergy 5.0 Gen 3 Data Sheet  GivEnergy 5.0 Gen 3 Installation Manual This package includes:   1 x GivEnergy 9.5 kWh Li-Ion Battery Gen 3 (GIV-BAT-9.5-G3) 1 x GivEnergy 1PH Hybrid Inverter 5.0kW Gen 3 with bonding kit (GIV-HY-5.0.-G3-PE) 1 x GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet) 1 x GivEnergy Programmable Single Phase Energy Meter with CT 1 x GivEnergy Grommet for cable 1 x GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters GivEnergy's newly released Gen 9.5kWh battery offers an impressive cost/ kWh.  Featuring a smaller size and higher capacity, it is ideal for medium to large properties and  can be installed in a wider range of locations due to its compact design. The batteries are extremely safe and the battery chemistry does not contain any Cobalt, making it non-flammable. The battery pack is 99% recyclable.   Features Uses latest LiFePO4 prismatic cell technology Retrofit compatibility Remote firmware upgrades Easy install plug and play IP65 Rated  Specs Weight: 85kg Nominal Energy: 9,500 Wh Depth of Discharge: 100% Voltage: 51 V Continuous Rate of Discharge (Normal Use:: 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 seconds) : 7,080 W Maximum Charge Rate (5 mins): 6,144 W Warranty: 12 years Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.