Products (901)

SolarEdge Home Inline Meter - Network Ready, 1PH/3PH 230/400V, 65A #2: MTR-240-3PC1-D-A-MW Display - Energy Meter SolarEdge Meter Datasheet Inline Energy Meter   Performs export/import, production and consumption energy readings with 1% accuracy Easier installations using SolarEdge Energy Net to communicate wirelessly with the inverter (RS485 connectivity is optional) Supports export/import limitation and SolarEdge Smart Energy applications Enables direct connection of up to 65A per phase, for single and three phase grid connections

SolarEdge Home Network Plug-in and Antenna#2: SE1000-ZB06-MOD#4: ENET-HBCL-01 Wireless Home Energy Management - Device Control Solution ·       ZigBee module to support Home Energy Management - Device Control functionality ·       Functions as Home Energy Management - Device Control network manager ·       Installed within the inverter enclosure for outdoor resilience ·       Antenna external to inverter for wider range This card can not be used together with 'SolarEdge WiFi Module Kit' or with WIFI enabled Solar Edge inverters.  Not for SetAPP inverters.  SolarEdge Energy Net for SetApp inverter - can be used when the inverter is not using cellular or zigbee device.

SolarEdge P404 Optimiser 60/72 cells #1: P404-MC4 Inverters - Optimisers#3: 2169 Minimum order: 4 Units   Global delivery time - approximately 2-5 business days The P404-MC4 allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string and is ideally suited to standard 60 and 72 cell modules. This increased flexibility will allow smaller installations to be optimised for maximum energy output. Second generation optimisers from SolarEdge, pioneers of optimiser technology.  In addition to the benefits of previous versions of the optimsers such as added energy, flexible design, module level monitoring and safety, the P Series range includes features including: Optimised for high-power modules Faster, simpler Installation requiring just a single screw Compliance with VDE-AR-E 2100-712 Fire Safety standard SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel.  Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal.  Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down.

SolarEdge P505 Optimiser MC4 High Current for Bi-Facial#1: P505-MC4 Inverters - Optimisers#3: SolarEdge P505 Rail Mounted Power Optimiser Minimum order: 4 Units   Rating: 505W The P505-MC4 not only allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string but its ideally suited to larger, higher voltage and higher current modules such as 96 cells (high voltage) or bi-facial (high current). This increased flexibility will allow smaller installations to be optimised for maximum energy output.SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel. Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal. Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down.This optimiser is ideal for getting the most out of high powered 60 or 72 cell modules.

SolarEdge P601 Rail Mounted Power Optimiser #3: 4296  SE P601 Optimiser Data Sheet  SE P601 Optimiser Installation Manual  SE P601 Optimiser Warranty Minimum order: 4 Units   SolarEdge P601 Rail Mounted Power Optimiser The P601 Power Optimiser is suitable for use with high current, high power (max 14A, 65V) modules up to 600W. Optimisers allow for uneven strings, longer strings, mix of panel types and orientations on the same string as well as reducing the impact of partial shading on the array. Specifications: Max input Voc: 65V Minimum number of optimisers: 6 Maximum number of optimisers: 25 25 Year warranty SafeDC protection Module-level monitoring

SolarEdge P801 Optimiser 800W MC4 2x72 Cell 0.9m/2.2m #1: P801-MC4#3: 3479#4178  SE P801 Optimiser Data Sheet  SE P801 Optimiser Installation Manual  SE P801 Optimiser Warranty  SE P801 Optimiser Certification Minimum order: 4 Units   P801-4RMLMRY For 72 cells, 2 in series (landscape), 125V, input 0.9m, output 2.2m The most cost effective solution for commercial and large field installations Specifically designed to work with SolarEdge inverters Up to 25% more energy  Superior efficiency (99.5%) Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer strings lengths possible. Fast installation with a single bolt Advanced maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety Use with two PV modules connected in series or in parallel This optimiser is ideal for commercial installations allowing the connection of two  panels to one power optimiser. This optimiser is compatible with large SolarEdge inverters (SE-16000 and up) only.  Weight: 1.05 kgMin PPT Voltage: 13 VMax PPT Voltage: 105 VDC Startup Voltage: 13 VDC Shutdown Voltage: 13 VMax Input Voltage: 125 VMax DC Power: 800 WMax AC Power (5 Minutes): 0 WSurge AC Power (1 Second): 0 WMax DC Current: 11.75 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 2Euro Efficiency: 98.6 %Transformer: N/AMPPT Quantity : 1Has Integrated DC Switch: NoWarranty: 25 years

SolarEdge Power Management package <100A grid supply#2: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#3: 2111#3086#4: SE-WND-3Y400-MB-K2This part is made up of the following items:1 x 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection SKU: #1: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#2: SolarEdge Energy Meter with Modbus Connection#3: SE-WND-3Y400-MB-K2 1 x 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection SKU:  #1: SE-ACT-0750-100 Display - Current Sensor Clamps#3: SECT-SPL-100A-A10 x Double pair genuine RS485 cable 1M - 4 cores SKU:  #1: RS485-DOUBLE-1M This kit is a full monitoring package for Solaredge domestic systems that allows full recording and display of energy generation and usage. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption.Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 100kWp PV system with 85kW of inverters could be limited to 75kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday - Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this 'lost' energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times.Note: This package includes an energy meter and 100A CT for a single inverter system. For a system with multiple inverters depending on inverter type, an additonal RS-485 expansion kit might be required. This allows multiple inverters to be connected in a communication bus and also to the energy meter.A 10m length of RS-485 cable is included for connection between the inverter and energy meter, and for connecting the inverters in the bus. Please check if this quantity is sufficient.Supplied with 1 X 100A current monitoring clamps suitable for installation on properties with up to 100A per phase power supply.Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note other CTs are available.

Solaredge Power management package for up to 250A grid supply with Modbus Connection   Part No: SE-PM-WND-3PH-250A Power Management - Export Limitation 3ph This part is made up of the following items:   1 x  1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 3 x 250A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 1 x SolarEdge RS485 Plug-in 20 x Double pair genuine RS485 cable 1M - 4 cores   This kit is a full monitoring package for Solaredge commercial systems that allows full recording and display of energy generation and usage. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption.   Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 100kWp PV system with 85kW of inverters could be limited to 75kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday - Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this 'lost' energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times.   Note: This kit includes 1x RS485 Expansion Kit, which means its only suitable for systems with 2x inverters. If more than 2x inverters on site additional RS485 Kit per inverter will be required, if only one inverter on site this part will not be required.   A 20m length of RS-485 cable is included for connection between the first inverter and energy meter, and for connecting the inverters in the bus. Please check if this quantity is sufficient.   Supplied with 3 X 250A current monitoring clamps suitable for installation on properties with up to 250A per phase power supply.   Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note smaller CTs are available

SolarEdge S1000 Commercial Optimiser - Extended #3: 5124  SE S1000 Optimiser  Datasheet Minimum order: 4 Units   This optimiser is ideal for commercial installations allowing the connection of two high powered or bi-facial panels in series to one power optimiser.Optimisers allow for uneven strings, longer strings, mix of panel types and orientations on the same string as well as reducing the impact of partial shading on the array.This extended option increases length of the cabling on the optimiser from 2.7m to 4.7m meaning that these optimisers can be used in both portrait and landscape orientations. Specifications:   Rated Input DC Power: 1000W Max input Voc: 125V Max Isc current: 15A Minimum number of optimisers: 14 Maximum number of optimisers: 30 25 Year warranty SafeDC protection Module-level monitoring Output Cable length: 4.7m Extended input: adds 2m

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE25K-RW00IBNJ4   SolarEdge 25kW Datasheet  SolarEdge 25kW Manual  SolarEdge 25kW Warranty  SolarEdge 25kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 25kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configuration.  SE25K-RW00IBNJ4 These are outstanding inverters for medium to large commercial rooftop and ground mount installs.  Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE25K-RW00IBNJ4Weight: 32 kgRated Power: 25,000 WMin PPT Voltage: 750 VMax PPT Voltage: 1,000 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 37,500 WMax AC Power (5 Minutes): 25,000 WSurge AC Power (1 Second): 25,000 WMax DC Current: 36.25 AMax DC Inputs: 4Has DC Fuses: 8Connector: MC4Included Connectors: 4Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE30K-RW00IBNJ4   SolarEdge 30kW Datasheet  SolarEdge 30kW Manual  SolarEdge 30kW Warranty  SolarEdge 30kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 30kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configurationSE30K-RWR0IBNZ4These are outstanding inverters for medium to large commercial rooftop and ground mount installs.  Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE30K-RW00IBNJ4Weight: 32 kgRated Power: 30,000 WMin PPT Voltage: 13 VMax PPT Voltage: 60 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 29,990 WSurge AC Power (1 Second): 29,990 WMax DC Current: 43.5 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Three Phase Inverter, 33.3kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE33.3K-RW00IBNJ4   SolarEdge 33.3kW Datasheet  SolarEdge 33.3kW Manual  SolarEdge 33.3kW Warranty  SolarEdge 33.3kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 33.3kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configurationSE33.3K-RWR0IBNZ4These are outstanding inverters for medium to large commercial rooftop and ground mount installs.  Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE33.3K-RW00IBNJ4Weight: 32 kgRated Power: 33,300 WMin PPT Voltage: 750 VMax PPT Voltage: 1,000 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 50,000 WMax AC Power (5 Minutes): 33,300 WSurge AC Power (1 Second): 33,300 WMax DC Current: 48.25 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Wi-Fi Antenna for Three Phase Inverter with Synergy Technology (1pc) #1: SE-ANT-ZB-WIFI-03 Display - Web Interfaces*Collections are not permitted due to health & safety regulations*SE-ANT-ZB-WIFI-0

SolarEdge WiFi and ZigBee Antenna single (SetAPP )Part No: SE-WIFI-ANTENNA Display - Web Interfaces*Collections are not permitted due to health & safety regulations*Solar Edge Antenna for Wi-Fi and ZigBee Communications. Simple Wireless Connectivity Used to connect a Solar Edge device to the monitoring platform via Wi-Fi Used to connect a Solar Edge device to Smart Energy devices via ZigBee communications Antenna external to inverter for wider range Wi-Fi and Zigbee stations are built into Solar Edge device Indoor and outdoor usage 5 years warranty All inverters with the new communication board come with integrated WiFi for commissioning with SetApp. If connection to the monitoring portal via WiFi is required then this part – antenna - is required (the signal of the integrated WiFi is not strong enough). The inverter does not need to be connected to the internet for commissioning purposes, but the installer must have an internet connection from their mobile device to download the app. SE-ANT-ZBWIFI-KIT.Please note this WIFI Antenna will NOT work with older type Solar Edge inverters with display.For SetAPP inverters without screen ONLY.

SolarEdge Zigbee Module for Home Energy Management ( Set APP )#1: SE-ZBSLV-B-S1-RW Accessories - Smart PlugsWireless Smart Energy Solution- ZigBee plug-in supports Smart Energy applications in Inverters with SetApp configuration- Functions as Smart energy network manager- ZigBee Plug-in supports up to 10 Smart Energy devices- Antenna external to inverter for wider range- ZigBee Plug-in installed within the inverter enclosure for outdoor resilience

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2     SolaX 3.7kW Data Sheet  SolaX 3.7kW Manual  SolaX 3.7kW Warranty  SolaX 3.7kW G98 Certificate  For a full list of SolaX products click here.  *Collections are not permitted due to health & safety regulations* G4-V2 HV Single Phase Hybrid Inverter And Charge Controller This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements.   Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment   Weight: 24 kgRated Power: 3,680 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 5,500 WMax AC Power (5 Minutes): 3,700 WSurge AC Power (1 Second): 3,701 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIXIncluded Connectors: 2Euro Efficiency: 97 %None NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 10 years