Products

SolarEdge P801 Optimiser 800W MC4 2x72 Cell 2.2m 2: P801-MC4#3: 3479 SE P801 Optimiser Data Sheet SE P801 Optimiser Installation Manual SE P801 Optimiser Warranty SE P801 Optimiser Certification Minimum order: 6 Units P801-4RMLMRY For 72 cells, 2 in series (landscape), 125V, input 0.9m, output 2.2m The most cost effective solution for commercial and large field installations Specifically designed to work with SolarEdge inverters Up to 25% more energy Superior efficiency (99.5%) Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer strings lengths possible. Fast installation with a single bolt Advanced maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety Use with two PV modules connected in series or in parallel This optimiser is ideal for commercial installations allowing the connection of two panels to one power optimiser. This optimiser is compatible with large SolarEdge inverters (SE-16000 and up) only. Specs Weight: 1.05 kg Min PPT Voltage: 13 V Max PPT Voltage: 105 V DC Startup Voltage: 13 V DC Shutdown Voltage: 13 V Max Input Voltage: 125 V Max DC Power: 800 W Max AC Power (5 Minutes): 0 W Surge AC Power (1 Second): 0 W Max DC Current: 11.75 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 2 Euro Efficiency: 98.6 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years

SolarEdge Power Management package <100A grid supply#2: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#3: 2111#3086#4: SE-WND-3Y400-MB-K2This part is made up of the following items:1 x 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection SKU: #1: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#2: SolarEdge Energy Meter with Modbus Connection#3: SE-WND-3Y400-MB-K2 1 x 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection SKU: #1: SE-ACT-0750-100 Display - Current Sensor Clamps#3: SECT-SPL-100A-A10 x Double pair genuine RS485 cable 1M - 4 cores SKU: #1: RS485-DOUBLE-1M This kit is a full monitoring package for Solaredge domestic systems that allows full recording and display of energy generation and usage. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption.Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 100kWp PV system with 85kW of inverters could be limited to 75kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday - Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this 'lost' energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times.Note: This package includes an energy meter and 100A CT for a single inverter system. For a system with multiple inverters depending on inverter type, an additonal RS-485 expansion kit might be required. This allows multiple inverters to be connected in a communication bus and also to the energy meter.A 10m length of RS-485 cable is included for connection between the inverter and energy meter, and for connecting the inverters in the bus. Please check if this quantity is sufficient.Supplied with 1 X 100A current monitoring clamps suitable for installation on properties with up to 100A per phase power supply.Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note other CTs are available.

SolarEdge S1000 Commercial Optimiser - Extended #3: 5124 SE S1000 Optimiser Datasheet Minimum order: 4 Units This optimiser is ideal for commercial installations allowing the connection of two high powered or bi-facial panels in series to one power optimiser.Optimisers allow for uneven strings, longer strings, mix of panel types and orientations on the same string as well as reducing the impact of partial shading on the array.This extended option increases length of the cabling on the optimiser from 2.7m to 4.7m meaning that these optimisers can be used in both portrait and landscape orientations. Specifications: Rated Input DC Power: 1000W Max input Voc: 125V Max Isc current: 15A Minimum number of optimisers: 14 Maximum number of optimisers: 30 25 Year warranty SafeDC protection Module-level monitoring Output Cable length: 4.7m Extended input: adds 2m

Solar Edge S650B Power Optimizer #2:S650-B-MC4 S650B Datasheet S650B Product Update S650B Installation guide S650B Warranty Minimum order: 4 Units The S-series Power Optimizers are smarter and safer with patented SolarEdge technology delivering more safety features and, with new improved cable management, the S-series speeds up the stringing of the Power Optimizers. Specifically designed to work with SolarEdge residential inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%) Specs Weight: 0.79 kgMin PPT Voltage: 0 VMax PPT Voltage: 105 VDC Startup Voltage: 8 VDC Shutdown Voltage: 8 VMax Input Voltage: 0 VMax DC Power: 650 WMax AC Power (5 Minutes): 0 WSurge AC Power (1 Second): 0 WMax DC Current: 15 AMax DC Inputs: 1Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 0 %Transformer: N/AMPPT Quantity : 1Has Integrated DC Switch: NoWarranty: 25 years  

SolarEdge Smart EV Charger - 22kW 3p, Socket Type 2, RFID, MID, (for UK) Un-Tethered #4: SE-EVK22URM-01 SolarEdge EV Charger 22kW Data Sheet SolarEdge EV Charger 22kW Installation Manual SolarEdge EV Charger 22kW Registering EV Charger This Smart EV Charger works seamlessly within the SolarEdge Home range. Homeowners can control and optimise all household energy from the mySolarEdge app. Features Utilizes excess PV to charge EV Custom scheduling feature, allows for automatic charging during low-rate periods, including at night or during a power outage Suitable for three phase indoor or outdoor installations Control and monitor via the mySolarEdge app, including remote operations, charging schedules, and charging history. G-100 compliant Integrated optional RFID card authentication and MID meter Tamper protected – designed to detect and alert about any tamper attempts Warranty: 3 years Specs Nominal AC Output Voltage: 3 x 230 / 400 Protection Rated: IP54 Compatible Inverters: All SetApp-enabled residential inverters up to SE15K, excluding the Single Phase Inverter with Communication Interface: Ethernet 1, Ethernet 2, WLAN/WI-FI supported modes Cable Length (for variants with cable): 6m Dimensions: 260 x 580 x 390 (H x W x D)

SolarEdge Smart EV Charger - 7.4kW, 1ph, 6m Cable Type 2, (for UK) #4: SE-EVK74C00-01 SolarEdge EV Charger 7.4kW Data Sheet SolarEdge EV Charger 7.4kW Installation Manual SolarEdge EV Charger 7.4kW Registering EV Charger This Smart EV Charger works seamlessly within the SolarEdge Home range. Homeowners can control and optimise all household energy from the mySolarEdge app. This tethered single phase charger is compatible with SolarEdge SetApp-enabled residential inverters up to 15kW excluding the Single Phase Inverter with Compact Technology. Features Use excess solar power to charge EV Monitor and control PV and EV from a single app Customize charging schedule for automatic charging during low-rate periods G100 Issue 2 Amendment 2 compliant Tamper protection and protection from main circuit breaker tripping Dynamic balancing of charging power output Mode 3 charger combining PV and grid electricity Tethered 6m Type 2 cable included Smart-scheduling for use with Time-of-Use (TOU) rates — charge from the grid during off-peak hours Manual TOU – schedule one off events Track PV EV and grid consumption Warranty: 3 years Installation Requirements Must install an Earth Electrode Residential systems only Maximum of three per site Must be installed with a system that contains an inverter and meter Installed vertically on an appropriate wall surface Options to communicate with the cloud and inverter via the local network router: 1. Ethernet 2. LSA+ 3. Wi-Fi Specs Phases" 1 Phase EV Power Rating: kW7.4 Dimensions: 260 x 764 x 385 (H x W x D)

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE25K-RW00IBNJ4 SolarEdge 25kW Datasheet SolarEdge 25kW Manual SolarEdge 25kW Warranty SolarEdge 25kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 25kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configuration. SE25K-RW00IBNJ4 These are outstanding inverters for medium to large commercial rooftop and ground mount installs. Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE25K-RW00IBNJ4Weight: 32 kgRated Power: 25,000 WMin PPT Voltage: 750 VMax PPT Voltage: 1,000 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 37,500 WMax AC Power (5 Minutes): 25,000 WSurge AC Power (1 Second): 25,000 WMax DC Current: 36.25 AMax DC Inputs: 4Has DC Fuses: 8Connector: MC4Included Connectors: 4Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE30K-RW00IBNJ4 SolarEdge 30kW Datasheet SolarEdge 30kW Manual SolarEdge 30kW Warranty SolarEdge 30kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 30kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configurationSE30K-RWR0IBNZ4These are outstanding inverters for medium to large commercial rooftop and ground mount installs. Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE30K-RW00IBNJ4Weight: 32 kgRated Power: 30,000 WMin PPT Voltage: 13 VMax PPT Voltage: 60 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 29,990 WSurge AC Power (1 Second): 29,990 WMax DC Current: 43.5 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Three Phase Inverter, 33.3kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE33.3K-RW00IBNJ4 SolarEdge 33.3kW Datasheet SolarEdge 33.3kW Manual SolarEdge 33.3kW Warranty SolarEdge 33.3kW G99 Certificate *Collections are not permitted due to health & safety regulations* Three Phase Inverter, 33.3kW, Glands, DC safety unit with switch, AC & DC SPD, Fuses, RSD, Inverters with SetApp configurationSE33.3K-RWR0IBNZ4These are outstanding inverters for medium to large commercial rooftop and ground mount installs. Product Features Built-in module level monitoring with Ethernet, wireless and GSM communication Easy config using smartphone and SolarEdge SetApp Small and light to install Type 2 DC and AC surge protection Arc Fault protection IP65 DC safety unit for external DC Isolators Compatible with S1200 Optimisers Supplier Part No: SE33.3K-RW00IBNJ4Weight: 32 kgRated Power: 33,300 WMin PPT Voltage: 750 VMax PPT Voltage: 1,000 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 50,000 WMax AC Power (5 Minutes): 33,300 WSurge AC Power (1 Second): 33,300 WMax DC Current: 48.25 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

SolarEdge Tower to Tower Cable Set for Home Battery 48V #2: SE-CABLE-T2T-4.6 Storage Systems - Battery Cable SolarEdge 48V Home Battery Datasheet SolarEdge 48V Home Battery Installation Manual SolarEdge Floor Mount Installation Guide SolarEdge 48V Home Battery Warranty Floor Mount Installation Guide

SolarEdge WiFi and ZigBee Antenna single (SetAPP )Part No: SE-WIFI-ANTENNA Display - Web Interfaces*Collections are not permitted due to health & safety regulations*Solar Edge Antenna for Wi-Fi and ZigBee Communications. Simple Wireless Connectivity Used to connect a Solar Edge device to the monitoring platform via Wi-Fi Used to connect a Solar Edge device to Smart Energy devices via ZigBee communications Antenna external to inverter for wider range Wi-Fi and Zigbee stations are built into Solar Edge device Indoor and outdoor usage 5 years warranty All inverters with the new communication board come with integrated WiFi for commissioning with SetApp. If connection to the monitoring portal via WiFi is required then this part – antenna - is required (the signal of the integrated WiFi is not strong enough). The inverter does not need to be connected to the internet for commissioning purposes, but the installer must have an internet connection from their mobile device to download the app. SE-ANT-ZBWIFI-KIT.Please note this WIFI Antenna will NOT work with older type Solar Edge inverters with display.For SetAPP inverters without screen ONLY.

SolarEdge Zigbee Module for Home Energy Management ( Set APP )#1: SE-ZBSLV-B-S1-RW Accessories - Smart PlugsWireless Smart Energy Solution- ZigBee plug-in supports Smart Energy applications in Inverters with SetApp configuration- Functions as Smart energy network manager- ZigBee Plug-in supports up to 10 Smart Energy devices- Antenna external to inverter for wider range- ZigBee Plug-in installed within the inverter enclosure for outdoor resilience

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2 SolaX 3.7kW Data Sheet SolaX 3.7kW Manual SolaX 3.7kW Warranty SolaX 3.7kW G98 Certificate For a full list of SolaX products click here. *Collections are not permitted due to health & safety regulations* G4-V2 HV Single Phase Hybrid Inverter And Charge Controller This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Weight: 24 kgRated Power: 3,680 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 5,500 WMax AC Power (5 Minutes): 3,700 WSurge AC Power (1 Second): 3,701 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIXIncluded Connectors: 2Euro Efficiency: 97 %None NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 10 years

SolaX 5kW G4-V2 Hybrid inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. *Collections are not permitted due to health & safety regulations* G4 HV Single Phase Hybrid Inverter And Charge Controller This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges, incorporating some new enhancements. Additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load. 30 Min installation Faster and easier installation reduces the time spent on site. Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C. Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products so no need to purchase additional Wi-Fi equipment. Specs Weight: 24 kgRated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 7,500 WMax AC Power (5 Minutes): 5,001 WSurge AC Power (1 Second): 5,002 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIXIncluded Connectors: 2Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years

Solar & Battery Installation – Rochdale (This is an example installation and is not available for purchase.) Installation Overview Our customer in Rochdale installed a high-performance SolaX battery storage system to maximise energy usage and charge from cheap night-time electricity rates. This setup is designed for efficient energy storage and flexible home energy management. System Specifications Battery Charger: SolaX 5kW AC Battery Storage: 3 x 5.8kWh Triple Power SolaX batteries This installation highlights a smart and cost-effective energy storage solution suitable for residential properties looking to reduce grid reliance and save on electricity bills. For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

SOLAX BMS Parallel Box G2 #2: SOLAX-BMS-PB-G2 Storage Systems - Accessory SolaX BMS Datasheet SolaX BMS Manual   SOLAX BMS Parallel Box This BMS is ideal for use with the X1 and X3 Hybrid Inverters. It allows you to double the storage capacity with the T30 & T58. The BMS parallel box acts as a replacement for the Master battery. If retrofitting the parallel box to an existing system, the Master battery becomes redundant and cannot be installed with the parallel box. T58 X1  Single Phase: 2, 4 or 6 Triple Power 5.8kWh batteries. Requires Master X3  Three Phase: 4, 6, 8 Triple Power 5.8kWh batteries. Requires Master T30 X1  Single Phase: 2, 4 or 6 Triple Power 3.0kWh batteries. Requires BMS X3  Three Phase: 4, 6, 8 Triple Power 3.0kWh batteries. Requires BMS Please note: Unlike G1 version of BMS-Parallel Box this G2 now requires T58 Master battery, meaning it is easier to retro-fit to existing systems. A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product. Features Increase the capacity of ESS Extend the working hours of ESS Dual-module in case Prolong the batteries life due to the alternate use of dual-module IP55 Weight: 8.7 kg Depth: 153.5 mm Height: 334 mm Width: 368 mm