Black Friday Deals

PylonTech US3000C 3.5kWh Li-Ion Solar Battery Storage D.O.D of 95% Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.  To view our full range of Pylontech batteries visit our collection page here. #2: PYLON-US3000C   US3000C Datasheet US3000C Installation Manual US3000C Warranty Pylontech US3000C HESS Lithium Battery – 3.5kWh High-Performance Energy Storage The Pylontech US3000C is a next-generation 3.5kWh LiFePO4 home energy storage system (HESS), designed for UK residential and commercial solar installations. Featuring battery-to-battery connecting cables included as standard, the US3000C offers enhanced firmware, increased operational logic (0.8C to 1.0C), and a 95% depth of discharge (DoD) for maximum usable capacity. Developed with Pylontech’s proprietary lithium iron phosphate cells, the US3000C delivers high safety, long life, and reliable performance. Its self-designed Battery Management System (BMS) protects against abnormal temperature, current, voltage, state of charge (SoC), and state of health (SoH). Key Features High Capacity & Performance Nominal Capacity: 3.5kWh Depth of Discharge (DoD): 95% Single Module Power Output: Up to 3.5kW* (*dependent on inverter/charger, typically 1.8kW sustained) Long cycle life of 6,000 cycles Modular & Expandable Design Up to 16 units can be connected in parallel for large-scale energy storage US3000C can expand an existing US3000 battery bank (must act as the master battery) Gives customers flexibility to scale system capacity Safety & Reliability Developed with high-quality lithium iron phosphate cells for enhanced safety Intelligent BMS protects against temperature, current, voltage, SoC, and SoH anomalies Built-in pre-charge function protects ESS systems from surge currents Easy Installation & Compatibility Compact and stylish design fits comfortably in home environments Simple buckle fixing minimises installation time and cost Compatible with a wide range of hybrid inverters commonly used in the UK Technical Advantages Enhanced firmware and operational logic from 0.8C to 1.0C Battery-to-battery connecting cables included for easy integration Modular design supports scalable energy storage for homes and commercial properties Why Choose Pylontech US3000C? High-capacity, reliable, and safe lithium battery for UK installations Scalable modular system for flexible energy storage solutions Compatible with numerous hybrid inverters Long cycle life and 95% DoD for maximised usable energy Simplifies installation with included cables and easy mounting ✅ Invest in the Pylontech US3000C 3.5kWh HESS battery for a safe, scalable, and high-performance energy storage solution for your UK home or commercial property. To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support

GSL Energy 10.24kWh Powerwall Battery - Wall Mounted GSL PowerWall Datasheet GSL PowerWall Warranty GSL PowerWall Installation manual Compatible with Solis, Sunsynk, Victron & Voltronic hybrid inverters 1 GSL051200A-B-GBP The GSL Energy 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. Battery to battery and battery to inverter cables are included. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL Energy 10.24kWh Powerwall battery, designed for optimal performance and flexibility. Busbar required for multiple batteries, package available here with cables.

Sunsynk ECCO 3.6kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1:SUN-3.6-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 80A Victron Lynx for 2+ batteries Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk Warranty Sunsynk 3.6Kw G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk 3.6kW AC ECCO 7kWp Hybrid Inverter + GSL 10.24kWh Powerwall Battery Maximise your solar energy potential with this next-generation hybrid inverter and high-capacity battery storage solution. Perfect for residential or commercial setups, the Sunsynk system offers intelligent energy management, seamless integration with solar PV, and flexible battery storage for uninterrupted power. Sunsynk 3.6kW AC ECCO Hybrid Inverter Features: Rated Power: 3,600 W AC output (5-minute max: 3,960 W; surge: 5,400 W) Dual MPPT Design: 7,000 W maximum DC input Battery Compatibility: Supports Lithium-ion and Lead Acid batteries up to 50kWh Smart Energy Management: API integration with Octopus Agile & Flux for dynamic energy pricing and SEG export Programmable Power Export: Automatically switches between Grid-Tied and Off-Grid modes Parallelable: Up to 16 units on the same firmware Protection & Durability: IP65 rated, anti-islanding protection, integrated DC switch High Efficiency: 99.9% Euro efficiency Warranty: 5 years standard GSL 10.24kWh Powerwall Battery Features: Integrated Functions: Combines inverter, solar charger, and battery for uninterruptible power support Battery Type: LiFePO4 (LFP) for stable, safe, and long-lasting energy storage Capacity: 10.24kWh per battery, 200Ah, supports up to 16 units in parallel Charging: Max 100A, continuous 120A Installation: Plug-and-play, modular design, portable for easy handling Space Efficient: Footprint only 0.15 m², suitable for wall or floor mounting Protection: Overload, over-temperature, short-circuit, and triple protection at module, pack, and system level Certifications: CE, ROHS, VDE, MSDS, UN38.3, IEC approved Dimensions: 621 × 214 × 550 mm Weight: 93 kg Key Benefits: Complete Control: Use the Sunsynk App for real-time monitoring, push notifications, and remote configuration. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Cost Optimisation: Schedule charging and discharging based on Octopus Agile & Flux tariffs for maximum savings Flexible & Scalable: Expandable battery packs for growing energy needs Reliable & Safe: LFP technology, robust protection, and IP65-rated components for long-term performance This Sunsynk Hybrid + GSL Powerwall bundle is ideal for homeowners and businesses looking for a fully integrated, efficient, and intelligent solar energy storage system. Take control of your energy, reduce bills, and stay powered during outages.

Sunsynk battery storage 5Kw On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-5KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 120A Victron Lynx for 2+ batteries   Sunsynk 5kWw Data Sheet Sunsynk 5kW Installation Manual Sunsynk 5kW Warranty Sunsynk 5kW G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk 5kW ECCO Hybrid Inverter with GSL 10.24kWh Powerwall Battery The Sunsynk 5kW ECCO Hybrid Inverter paired with the GSL 10.24kWh Powerwall battery provides a complete, high-performance energy management solution. Ideal for residential and small commercial solar installations, this system manages power flow from solar, grid, and generators, offering flexible energy storage, backup capability, and smart monitoring. Key Features – Sunsynk 5kW ECCO Hybrid Inverter Advanced Energy Management Dual MPPT design for optimal solar energy harvest. Compatible with most Lithium-ion and Lead Acid batteries. Zero export function with support for multiple load management. Flexible System Expansion Up to 16 units with the same firmware can be paralleled. Essential and non-essential load outputs for smart energy prioritisation. Smart Monitoring & Remote Control Wi-Fi logger included for remote access via the Sunsynk App. Real-time push notifications for power cuts, generator usage, or battery status. Complete control of settings, updates, and inverter monitoring from anywhere. Durable & Reliable IP65-rated for indoor and outdoor installation. Automatic switching between grid-tied and off-grid modes. CE/ROHS/VDE/MSDS/UN38.3/IEC certified for international compliance. Seamless Integration Integrated with Octopus Agile, Flux & Go for energy optimisation and SEG payments. Charge batteries during low-cost periods and discharge when electricity prices are high. Key Features – GSL 10.24kWh Powerwall Battery Versatile Energy Storage Combines inverter, solar charger, and battery functions for uninterrupted power. Supports wall or floor mounting. Battery-to-battery and battery-to-inverter cables included. Smart & Configurable LCD display for voltage, battery charge current, and AC/solar charge prioritisation. Compatible with mains voltage or generator power with auto-restart. Flexible battery capacity options: standard or external batteries. High Performance & Safety MPPT controller converts solar energy directly to loads. Overload, over-temperature, and short-circuit protection. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel for scalable energy storage. Compact & Easy Installation Modular design allows single-person handling and installation. Plug-and-play, 30-minute setup. Space-saving footprint of 0.15 sqm per battery. Technical Specifications Sunsynk 5kW ECCO Hybrid Inverter Rated Power: 5,000 W Max DC Power: 6,500 W Max AC Power (5 min): 5,500 W Surge AC Power (1 sec): 11,000 W Max DC Current: 22 A DC Voltage: 125–425 V MPPT Quantity: 2 Integrated DC Switch: Yes GSL 10.24kWh Powerwall Battery Dimensions: 621 x 214 x 550 mm Net Weight: 93 kg Battery Capacity: 200 Ah Max Charging Current: 100 A Max Continuous Charging Current: 120 A Why Choose the Sunsynk ECCO & GSL Powerwall System? This integrated system provides homeowners with a smart, efficient, and flexible energy solution. With high-efficiency hybrid inverter technology, scalable LiFePO4 battery storage, real-time monitoring, and compatibility with Octopus Agile & Flux, you can optimise energy usage, save on electricity costs, and ensure uninterrupted power for your home. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.

Sunsynk battery storage 8kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-8KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs - LUG35-8 2m Red & Black 35mm2 battery Cable Keto 160A - KETO-00  & 2 x N5014907-160A  Victron Lynx for 2+ batteries   Sunsynk 8kW Data Sheet Sunsynk 8Kw Installation Manual Sunsynk 8kW Warranty Sunsynk 8kW G99 Certificate Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk 8kW Hybrid Inverter + GSL 10.24kWh Powerwall Battery Take complete control of your home energy with the Sunsynk 8kW ECCO Hybrid Inverter paired with the GSL 10.24kWh Powerwall Battery. This powerful combination lets you generate, store, and optimise solar energy while integrating seamlessly with the grid. Perfect for households looking to lower bills, improve efficiency, and gain energy independence. ⚡ Sunsynk 8kW Hybrid Inverter (ECCO) The Sunsynk 8kW Hybrid Inverter is designed to intelligently manage power from solar panels, the national grid, and generators. With advanced features and seamless connectivity, it’s ideal for flexible, reliable home energy systems. Key Features: Dual MPPT Design – maximises solar harvest. Octopus Agile & Flux Integration – buy electricity at cheap rates, sell back at peak times. Seamless Switching – automatic grid-tied to off-grid changeover. Scalable System – parallel up to 16 inverters with same firmware. App Monitoring – control settings and view live data via Sunsynk & SolarMan apps. Zero Export Function – prevents feed-back to grid where not permitted. IP65 Rated – durable, weather-resistant for indoor/outdoor installation. Specs: Rated Power: 8,000 W Max DC Power: 10,400 W Max Input Voltage: 500 V Max DC Current: 44 A MPPTs: 2 Surge AC Power: 8,002 W (1 sec) Euro Efficiency: 96.5% Weight: 25 kg Warranty: 5 Years 🔋 GSL 10.24kWh Powerwall Battery The GSL 10.24kWh Powerwall Battery is a reliable, modular storage solution compatible with Sunsynk, Victron, and Voltronic hybrid inverters. Built with LiFePO4 (LFP) chemistry, it provides safe, long-lasting performance for residential energy storage. Key Features: 10.24kWh Storage Capacity – scalable, supports up to 16 batteries in parallel. Safe & Stable LiFePO4 Cells – triple-layer protection (module, pack, system). Plug & Play Design – quick 30-minute installation, wall or floor mounted. Smart LCD Display – configure input voltages, charging currents, and priorities. Resilient Performance – overload, over-temperature & short circuit protection. Certified Quality – CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Specs: Capacity: 200Ah (10.24kWh) Max Charging Current: 100A Max Continuous Charging: 120A Dimensions: 621 × 214 × 550 mm Net Weight: 93 kg Footprint: 0.15 sqm Warranty: 10 Years (typical for GSL batteries) 📲 Smart Monitoring & Control With the Sunsynk App, enjoy full system visibility and control: Real-time monitoring of solar, battery & grid usage. Push notifications for power cuts or generator use. Change all inverter settings remotely. Custom reports & energy usage graphs. Integration with Octopus Agile, Flux & Go tariffs for smart charging & discharging. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. 🌍 Why Choose This Bundle? Reduce electricity bills with smart energy storage. Optimise solar self-consumption. Take advantage of cheap energy tariffs and earn via SEG payments. Gain energy independence with backup power during outages. Scalable and future-proof for growing energy needs. 👉 The Sunsynk 8kW Hybrid Inverter + GSL 10.24kWh Powerwall Battery bundle is the perfect solution for homeowners seeking efficient, smart, and flexible solar energy storage.

Dyness Universal Battery To Inverter Cable PackEasily connect your Dyness batteries to the inverter with this universal cable pack. The set includes red and black cables specifically designed for Dyness rechargeable lithium batteries, ensuring a secure and efficient connection. Each pack contains two cables with a length of 2060mm and a hole diameter of 8mm, suitable for one battery system. This accessory is essential for optimizing your battery storage setup. Note: collections are not possible, and for more information on battery storage and sizing, please visit our main page.

Dyness DL5.0C 5.12kWh Lithium Battery (Compatible with Sunsynk & Solis hybrid inverters) Please view our battery storage information page for sizing and selecting the right battery storage system for you. #4: Dyness-DL5.0C Dyness Installation Manual  DL5.0c  Dyness Datasheet  DL5.0c Dyness Compatibility List To view complete Dyness full range please visit our Dyness main page Dyness DL5.0C 5.12kWh LFP Battery Module – Scalable Residential & Commercial Energy Storage The Dyness DL5.0C is a versatile LFP (Lithium Iron Phosphate) battery module designed for residential and small commercial solar energy systems. Its modular, scalable design provides flexible energy solutions, supporting up to 50 batteries in parallel for a total capacity of 256kWh. Key Features: Capacity: 5.12kWh per module Scalable Design: Expandable from 5.12kWh to 256kWh, no busbar required for additional batteries Installation Flexibility: Wall-mounted, floor-standing, or stacked installation options High Safety: LFP chemistry with cell-level monitoring and balancing Recommended Maximum D.O.D: 90% for optimal battery longevity Real-Time Monitoring & Remote Upgrade: Track performance and update firmware via the Dyness App Compatibility: Works with most leading hybrid and AC-coupled inverters IP Rating: IP20 for indoor use Battery to Inverter Cables Included: Wall bracket included for simple setup Specifications: Battery Chemistry: Lithium Iron Phosphate (LiFePO4) Dimensions (H x W x D): 558 × 545 × 150 mm Scalability: Up to 50 batteries in parallel Weight: [Insert weight if available] The Dyness DL5.0C is perfect for homeowners or small businesses seeking a safe, flexible, and reliable energy storage solution. Its modular design and app-based monitoring make it easy to expand, manage, and optimise your solar energy system.

GROWATT MIC 1500TL X Single MPPT with Arc Fault Protection with DC #2: GROWATT-MIC1500-TL-X-AFP-DC Inverters - Main Units#3: 5391 GROWATT 1500TL X Data Sheet GROWATT 1500TL X Manual GROWATT 1500TL X Warranty GROWATT 1500TL X G100 Certificate Growatt TL-X 1,500W Single Phase Inverter – High Efficiency Residential Solution Product Overview The Growatt TL-X 1,500W inverter is designed for residential rooftop solar installations, combining high efficiency, robust performance, and a wide input voltage range. With a transformerless design and a single MPPT, it offers optimal energy conversion while remaining lightweight and easy to install. Key Features High Efficiency: Maximum efficiency of 97.6% with European efficiency of 96.5% Single MPPT: Ensures precise tracking and maximizes energy harvest Transformerless Design: Lightweight, compact, and convenient for rooftop installations Adjustable Power Factor: Flexible interface for optimal system integration User-Friendly Interface: Touch key and OLED display for easy monitoring Integrated DC Switch: Enhanced safety and simplified operation UK Installer Notes Installer Code Policy is being introduced for the UK & Ireland; all installers must register an Installer Code to use the Growatt monitoring platform Anti-reflux function requires the use of Meter SPM-E; CT clamps are not compatible Technical Specifications Specification Value Rated Power 1,500 W Max DC Power 2,100 W Max AC Power (5 min) 1,500 W Surge AC Power (1 sec) 1,500 W MPPT Quantity 1 Min MPPT Voltage 50 V Max MPPT Voltage 500 V DC Startup Voltage 50 V DC Shutdown Voltage 50 V Max DC Current 13 A Max DC Inputs 1 Connector Amphenol H4 Included Connectors 1 Euro Efficiency 97% Transformer None Weight 6.5 kg Warranty 10 years Benefits Reliable performance for residential solar rooftops Easy installation and lightweight design High energy conversion and precise MPPT tracking User-friendly monitoring with touch and OLED interface

GROWATT MIC 2000TL X Single MPPT with Arc Fault Protection Solar Inverter #2: GROWATT-MIC2000-TL-X-AFP Inverters - Main Units #3: 5392 GROWATT 2000TL X Data Sheet GROWATT 2000TL X Manual GROWATT 2000TL X Warranty GROWATT 2000TL X G100 Certificate Growatt MIC 2000TL-X – 2kW Single Phase Inverter Overview Growatt inverters are purpose-built for residential rooftop solar applications. The TL-X range offers a robust, transformerless design, delivering maximum efficiency and flexibility for home installations. Key Features MPPT tracking accuracy: 99% Maximum efficiency: 97.6% | European efficiency: 96.5% Transformerless design for lighter, more convenient installation Continuously adjustable power factor Flexible interface with touch key & OLED display Non-DC version UK Installer Policy The Installer Code Policy requires installers to register an "Installer Code" to use the Growatt monitoring platform. The code can be provided to the end user for remote monitoring through the installer account. Specifications Weight: 6 kg Rated Power: 2,000 W Min PPT Voltage: 50 V Max PPT Voltage: 500 V DC Startup Voltage: 50 V DC Shutdown Voltage: 50 V Max Input Voltage: 500 V Max DC Power: 2,600 W Max AC Power (5 Minutes): 2,000 W Surge AC Power (1 Second): 2,000 W Max DC Current: 13 A Max DC Inputs: 1 DC Fuses: None Connector: Amphenol H4 Included Connectors: 0 Euro Efficiency: 97% Transformer: None MPPT Quantity: 1 Integrated DC Switch: No Warranty: 10 years Notes To achieve the anti-reflux function on TL-X/TL-XE range, the Meter SPM-E must be used; a CT clamp alone cannot achieve this. Contact us for more details.

SMA Sunny Boy 3.0kW Solar Inverter - Single Phase with Smart Connect #4: SB3.0-1AV-41 SMA 3.0kW Data Sheet SMA 3.0kW Manual SMA 3.0kW Warranty SMA 3.0kW G99 Certificate Sunny Boy 3.0 – 3kW Single Phase String Inverter The Sunny Boy 3.0 from SMA Solar continues the legacy of the globally successful Sunny Boy 3000TL, offering reliable, high-efficiency solar power conversion for residential solar PV systems. With its lightweight design, intuitive installation, and smart connectivity features, this inverter is perfect for UK homeowners looking for a future-proof, easy-to-manage solar solution. Key Features Powerful & Efficient: 3,000W rated power with 2 MPPT inputs ensures maximum energy harvest from your solar array. SMA Smart Connected: Automatic inverter monitoring via the SMA Sunny Portal proactively reports faults to both installer and system owner, reducing downtime and saving maintenance costs. Tigo TS4-R Optimisation Compatible: Flexibly upgrade individual PV modules to maximise energy yield and reduce system costs. Easy Installation: Lightweight design with well-placed external connections makes setup fast and hassle-free. Flexible Integration: Compatible with intelligent energy management solutions and SMA storage systems for future expansion. Off-Grid Ready: Supports integration with backup systems for uninterrupted power supply. Technical Specifications Manufacturer: SMA Solar Phases: 1 Phase Rated Power: 3 kW Inverter Type: String Inverter No. of MPPT: 2 Built-in DC Switch: Yes Communication: Integrated Dimensions (H × W × D): 470 × 435 × 176 mm Off-Grid Compatible: Yes Commodity Code: 85044084 ✅ Why Choose Sunny Boy 3.0: Reliable 3kW single-phase inverter for home solar systems Smart monitoring with SMA Smart Connected for proactive alerts Optimise energy output using Tigo TS4-R module technology Lightweight and compact, perfect for easy UK installation Compatible with future solar storage solutions

SMA Sunny Boy 3.6kW Solar Inverter - Single Phase with Smart Connect #4: SB3.6-1AV-41 SMA 3.6kW Data Sheet SMA 3.6kW Manual SMA 3.6kW Warranty SMA 3.6kW G99 Certificate SMA Sunny Boy 3.6: Single-Phase String Inverter for Home Solar The SMA Sunny Boy 3.6 is the successor to the globally acclaimed Sunny Boy 3600TL, designed for maximum efficiency and convenience in residential solar installations. Lightweight, compact, and feature-rich, it ensures reliable PV system performance while offering seamless integration with SMA storage and smart energy management solutions. Key Features Rated Power: 3,600W, Single-phase output SMA Smart Connected: Automatic inverter monitoring with proactive fault alerts via the SMA Sunny Portal. Reduces downtime and allows installers to quickly diagnose and resolve issues. Tigo TS4-R Optimisation Compatible: Flexible module-level optimisation increases energy yields strategically while reducing system costs. Only affected PV modules are fitted with TS4-R optimisers. Easy Installation: Compact, lightweight design with intuitive external connections for fast commissioning. Flexible Energy Management: Supports SMA storage solutions and smart energy management systems, enabling energy self-consumption optimisation. Off-Grid Ready: Can operate with off-grid systems if needed. Specifications Manufacturer: SMA Solar Phases: Single-phase Power Rating: 3.6 kW Inverter Type: String Inverter Number of MPPTs: 2 Built-in Communication: Integrated Built-in DC Switch: Yes Off-Grid Compatible: Yes Dimensions (H x W x D): 470 x 435 x 176 mm Commodity Code: 85044084 Why Choose SMA Sunny Boy 3.6? The Sunny Boy 3.6 combines reliability, intelligence, and flexibility for residential solar users. Its lightweight design simplifies installation, while SMA Smart Connected and Tigo TS4-R compatibility ensures maximum energy yield and minimal maintenance. Perfect for homeowners seeking efficient, hassle-free solar power.

SMA Sunny Boy 5.0kW Solar Inverter - Single Phase with Smart Connect #4: SB5.0-1AV-41 SMA 5.0kW Data Sheet SMA 5.0kW Manual SMA 5.0kW Warranty SMA 5.0kW G99 Certificate   SMA Sunny Boy 5.0 String Inverter – 5kW, Single Phase The SMA Sunny Boy 5.0 is the next-generation residential string inverter, designed to maximise solar energy production for private homes. Combining high efficiency, smart connectivity, and flexible system integration, it delivers reliable performance and peace of mind for homeowners and installers alike. With integrated SMA Smart Connected service, the Sunny Boy 5.0 monitors your PV system, minimises downtime, and provides proactive alerts for any irregularities. Key Features Integrated SMA Smart Connected – free monitoring via SMA Sunny Portal; automatic notifications to operator and installer Optimised with Tigo TS4-R – module-level optimisation for increased energy yield and reduced system costs Quick and easy installation – lightweight design with conveniently located external connections Flexible energy management – compatible with SMA storage solutions and off-grid applications Reliable performance – built-in DC disconnects, dual MPPT inputs, and high-quality SMA components Specifications Manufacturer: SMA Solar Power Rating: 5,000 W Phases: Single Phase Inverter Type: String Inverter Built-in DC Disconnect: Yes Number of MPPTs: 2 Communication: Integrated Off-Grid Compatible: Yes Dimensions (H x W x D): 470 x 435 x 176 mm Commodity Code: 85044084 Benefits of the Sunny Boy 5.0 Proactive system monitoring – reduces downtime and maintenance costs Enhanced energy yield – Tigo module optimisation targets underperforming panels Installer-friendly – intuitive webserver for simple commissioning Expandable and flexible – integrates with SMA energy management solutions ✅ The SMA Sunny Boy 5.0 offers efficient, reliable, and smart solar power management for modern homes, making it an ideal choice for homeowners seeking maximum energy yield and minimal downtime.

SMA Sunny Boy 6.0kW Solar Inverter   #4: SB6.0-1AV-41 SMA 6.0kW Data Sheet SMA 6.0kW Manual SMA 6.0kW Warranty SMA 6.0kW G99 Certificate SMA Sunny Boy 6.0 Inverter – 6kW Single Phase The SMA Sunny Boy 6.0 is more than just a PV inverter. With its integrated SMA Smart Connected service, it provides automatic inverter monitoring, fault reporting, and reduced downtime – offering homeowners and installers an effortless solar experience. Designed for residential solar power systems, it combines high efficiency, lightweight design, and smart connectivity for a reliable and future-ready installation. Key Features 6kW Single-Phase Power – ideal for residential solar installations SMA Smart Connected – proactive fault detection and remote monitoring via the Sunny Portal Quick Installation – lightweight and compact with external connection points for fast setup Intuitive Commissioning – web-based configuration for easy setup and management Flexible Expansion – compatible with SMA storage and smart energy management solutions Tigo TS4-R Optimisation – add-on optimisers to reduce shading losses and increase yields SMA Smart Connected Monitoring SMA’s Smart Connected is a free service integrated into the Sunny Boy 6.0. The system continuously monitors inverter performance, sends fault notifications, and provides diagnostics directly to installers. This reduces system downtime, minimises maintenance costs, and ensures maximum energy production for homeowners. Technical Specifications Manufacturer: SMA Solar Phases: 1 Phase Rated Power: 6,000 W Inverter Type: String Inverter No. of MPPT Trackers: 2 Built-in DC Switch: Yes Built-in Communication: Integrated Off-Grid Compatible: Yes Dimensions (H x W x D): 470 x 435 x 176 mm Commodity Code: 85044084 Why Choose the SMA Sunny Boy 6.0? The Sunny Boy 6.0 combines efficiency, ease of use, and smart monitoring, making it one of the most trusted residential inverters on the market. With proactive support, flexible optimisation, and future-proof connectivity, it ensures long-term reliability and high solar yields.

SolarEdge P801 Optimiser 800W MC4 2x72 Cell 2.2m 2: P801-MC4#3: 3479 SE P801 Optimiser Data Sheet SE P801 Optimiser Installation Manual SE P801 Optimiser Warranty SE P801 Optimiser Certification Minimum order: 6 Units SolarEdge P801-4RMLMRY Power Optimiser The SolarEdge P801-4RMLMRY Optimiser is the most cost-effective solution for commercial and utility-scale PV installations. Specifically designed for use with SolarEdge inverters, it allows two 72-cell modules to be connected in series or parallel, enabling longer string lengths and reduced Balance of System (BoS) costs. With superior efficiency (99.5%) and module-level monitoring, it ensures maximum energy harvest, easier maintenance, and enhanced safety. Key Features Designed for large SolarEdge inverters (SE-16000 and above) Connect two PV modules per optimiser (series or parallel) Up to 25% more energy yield compared to traditional setups Superior efficiency – 99.5% Reduce BoS costs: 50% fewer cables, fuses, and combiner boxes Longer strings possible – over 2x standard lengths Fast installation with a single bolt design Advanced maintenance with module-level monitoring Module-level shutdown for enhanced installer and firefighter safety Technical Specifications Model: P801-4RMLMRY For Panels: 72-cell (2 in series, landscape) Cable Lengths: Input 0.9m / Output 2.2m Weight: 1.05 kg Min PPT Voltage: 13 V Max PPT Voltage: 105 V DC Startup Voltage: 13 V DC Shutdown Voltage: 13 V Max Input Voltage: 125 V Max DC Power: 800 W Max DC Current: 11.75 A Max DC Inputs: 2 Connector Type: MC4 (2 included) Euro Efficiency: 98.6% Transformer: N/A MPPT Channels: 1 Integrated DC Switch: No Warranty: 25 years Why Choose the SolarEdge P801 Optimiser? The P801-4RMLMRY is purpose-built for large-scale solar projects, offering: Higher energy yield per module Reduced installation time and costs Unmatched reliability with a 25-year warranty It’s the perfect choice for commercial rooftops and utility fields where efficiency, safety, and long-term performance are critical.

6 x panels 3kW solar & 10-40kWh battery storage with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)    Typical summer day expected daily generation: 12kW Typical winter day expected daily generation: 3.kW Battery storage charge/discharge rate: up to 3.6kWh Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar pv & battery storage kit includes: 6 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525w. Option to upgrade to any panels on our website by just paying the difference. 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter with 10.24kWh LiFePO4 Battery Achieve complete energy independence with the SunSynk 3.6kW AC ECCO Hybrid Inverter paired with the GSL 10.24kWh LiFePO4 battery. This next-generation hybrid inverter system is designed to maximise solar energy efficiency, provide reliable power backup, and offer smart energy management for your home or small commercial setup. Key Features Dual MPPT Design: Advanced 7kW MPPT controller ensures optimal solar energy capture. High Efficiency: Euro Efficiency of 99.9% reduces energy loss. Battery Compatibility: Supports Lithium-ion and Lead Acid batteries up to 50kWh. IP65 Rated: Fully weatherproof, suitable for outdoor installation. Anti-Islanding Protection: Automatically disconnects from the grid during outages for safety. Programmable Power Export: Flexible export to grid or home loads. Grid & Off-Grid Switching: Automatically switches modes to maintain uninterrupted power. Parallel Expansion: Up to 16 units can be connected for larger installations. Remote Monitoring & Control: Full system management via the SunSynk App with real-time alerts. Inverter Specifications Rated Power: 3,600 W Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W DC Voltage Range: 125–500 V DC Startup Voltage: 150 V / DC Shutdown Voltage: 125 V Max DC Inputs: 2, Max DC Current: 22 A Connector: MC4 Transformerless Design MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years Battery Specifications – GSL 10.24kWh LiFePO4 Nominal Energy: 10.24 kWh Depth of Discharge (D.O.D): 90% Life Cycles: 6,000 Max PV Input Power: 6,500 W Max Charge Current: 100 A Warranty: 10 Years Product Performance & Benefits All-in-One Solution: Combines inverter, solar charger, and battery for uninterrupted power. Portable & Modular Design: Single-person install with a compact 0.15 sqm footprint. Smart Monitoring: Real-time push notifications, live stats, and energy reports. Remote Configuration: Adjust inverter and battery settings anywhere via mobile app. Energy Cost Optimisation: Integrated with Octopus Agile, Flux & Go tariffs to save on energy bills. Safety Certified: CE, RoHS, VDE, MSDS, UN38.3, IEC approved. What’s Included 1 x SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery 6 x Mounting Equipment for Standard Pitched Roof 1 x Electrics Pack (solar cable, MC4 connectors, pre-terminated cable, AC & DC isolators, bi-directional meter) Control & Monitoring with SunSynk App Real-Time Updates: Track battery status, solar generation, and energy usage instantly. Remote Settings: Modify inverter parameters and firmware updates from anywhere. Detailed Reporting: Monitor performance, energy savings, and system peaks. Smart Alerts: Receive instant notifications for outages, battery status, or generator operation. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Upgrade your home energy system with the SunSynk 3.6kW AC ECCO Hybrid Inverter and GSL 10.24kWh battery – reliable, efficient, and smart solar energy management.

7 x panel 3.5kW solar & 10-40kWh battery storage with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 14kW Typical winter day expected daily generation: 3.5.kW Battery storage charge/discharge rate: up to 3.6kWh Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar pv & battery storage kit includes: 7 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kWh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter with 10.24kWh LiFePO4 Battery Maximise your home energy independence with the SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter, a next-generation hybrid inverter designed to optimise solar self-consumption, reduce energy bills, and provide reliable power backup. Compatible with both Lithium-ion and Lead Acid batteries, this system is perfect for flexible and scalable residential or small commercial solar energy solutions. Key Features of SunSynk 3.6kW Hybrid Inverter Dual MPPT Design: Optimises solar energy capture with up to 7kW MPPT input. High Efficiency: Euro Efficiency of 99.9% ensures minimal energy loss. Battery Support: Compatible with Lithium-ion and Lead Acid batteries up to 50kWh. IP65 Rated: Suitable for outdoor installation, resistant to dust and water ingress. Anti-Islanding Protection: Ensures safety by automatically disconnecting from the grid during outages. Programmable Power Export: Fully customisable energy export to the grid or home loads. Automatic Grid/Off-Grid Switching: Seamlessly transitions during power outages. Paralleling Capability: Connect up to 16 units for expanded systems. Remote Monitoring: Full system control via the SunSynk App for real-time monitoring and notifications. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Technical Specifications Inverter Specs Rated Power: 3,600 W Maximum DC Power: 7,000 W Maximum AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W Min/Max DC Voltage: 125–500 V DC Startup Voltage: 150 V / DC Shutdown Voltage: 125 V DC Inputs: 2, Max DC Current: 22 A Connector Type: MC4 Transformerless Design MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Battery Specs – GSL 10.24kWh LiFePO4 Nominal Energy: 10.24 kWh Depth of Discharge (D.O.D): 90% Life Cycles: 6,000 Maximum PV Input Power: 6,500 W Maximum Charge Current: 100 A Warranty: 10 years Benefits of SunSynk Hybrid System All-in-One Energy Solution: Combines inverter, solar charger, and battery for uninterrupted power support. Flexible Installation: Modular design allows single-person handling and easy transport. Real-Time Monitoring: Track energy production, battery status, and grid usage through the SunSynk App. Remote Configuration: Change settings, update firmware, and manage system performance from anywhere. Energy Cost Optimisation: Integrated with Octopus Agile, Flux & Go tariffs to charge batteries at low-cost times and discharge during high rates. Safe & Certified: CE, RoHS, VDE, MSDS, UN38.3, IEC approved for international compliance. Space-Saving: Compact footprint (0.15 sqm) suitable for home or small commercial spaces. What’s Included 1 x SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery 7 x Mounting Equipment for Standard Pitched Roof (portrait orientation) 1 x Electrics Pack (solar cable, MC4 connectors, pre-terminated cable, AC & DC isolators, bi-directional meter) Why Choose SunSynk? The SunSynk 3.6kW AC ECCO Hybrid Inverter delivers reliable, efficient, and future-proof home energy management. With smart monitoring, real-time notifications, and full control through the SunSynk App, this hybrid inverter system provides energy independence, cost savings, and peace of mind for your home or business.

8 x panels 4kW solar & 10-40kWh battery storage with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 16kW Typical winter day expected daily generation: 4kW Battery storage charge/discharge rate: 3.6kw Sunsynk 3.6kW Data Sheet Sunsynk 3.6kW Installation Manual Sunsynk 3.6kW Warranty Sunsynk 3.6kW G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar pv & battery storage kit includes: 8 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter with 10.24kWh LiFePO4 Battery Upgrade your home or small business energy system with the SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter, a next-generation hybrid solution designed to maximise solar self-consumption, reduce electricity bills, and provide uninterrupted power supply. This inverter is compatible with both Lithium-ion and Lead Acid batteries, making it ideal for flexible and scalable energy storage. Key Features of SunSynk 3.6kW Hybrid Inverter Dual MPPT Design: Optimises solar energy harvesting with up to 7kW MPPT input. High Efficiency: Euro Efficiency of 99.9% ensures minimal energy loss. Battery Compatibility: Supports Lithium-ion and Lead Acid batteries up to 50kWh. IP65 Rated: Weather-resistant for outdoor installation. Anti-Islanding Protection: Automatically disconnects from the grid during power outages. Paralleling Capability: Connect up to 16 units with the same firmware for expanded systems. Programmable Power Export: Customisable energy export to the grid or loads. Remote Monitoring & Control: Full system management via SunSynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Technical Specifications Inverter Specs Rated Power: 3,600 W Maximum DC Power: 7,000 W Maximum AC Power (5 min): 3,960 W Surge AC Power (1 sec): 5,400 W DC Inputs: 2, Max DC Current: 22 A MPPT Quantity: 2 DC Voltage Range: 125–500 V Connector Type: MC4 Transformerless Design Warranty: 5 years Battery Specs – GSL 10.24kWh LiFePO4 Nominal Energy: 10.24 kWh Depth of Discharge: 90% Battery Life Cycles: 6,000 Maximum PV Input: 6,500 W Maximum Charge Current: 100 A Warranty: 10 years Benefits of SunSynk Hybrid System All-in-One Energy Solution: Combines inverter, solar charger, and battery for uninterruptible power. Flexible Configuration: Compatible with standard or external battery packages, expandable as needed. Safety & Certification: CE, RoHS, VDE, MSDS, UN38.3, IEC approved. Remote Monitoring & Smart Notifications: Receive real-time alerts for power cuts, battery status, or generator use. Energy Cost Optimisation: Integrated with Octopus Agile, Flux & Go tariffs to charge at low-cost times and discharge when electricity rates are high. Compact & Easy Installation: Modular design allows single-person handling and space-saving installation. What’s Included 1 x SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery 8 x Mounting Equipment for Standard Pitched Roof (portrait orientation) 1 x Electrics Pack (solar cable, MC4 connectors, pre-terminated cable, AC & DC isolators, bi-directional meter) Why Choose SunSynk? With real-time monitoring, remote configuration, and intelligent energy management, the SunSynk 3.6kW AC ECCO Hybrid Inverter offers peace of mind, efficiency, and long-term cost savings. It’s perfect for homeowners or businesses aiming to maximise renewable energy usage and achieve energy independence.  

9 x panel 4.5kW solar & 10-40kWh battery storage with choice of panels   Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 8kW Typical winter day expected daily generation: 4.5kW Battery storage charge/discharge rate: 3.6kW Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate   Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar pv & battery storage kit includes: 9 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter with 10.24kWh LiFePO4 Battery Upgrade your home energy system with the SunSynk 3.6kW AC ECCO Hybrid Inverter. Designed for residential and small commercial installations, this next-generation hybrid inverter delivers exceptional performance, efficient battery management, and seamless solar integration. Perfect for reducing electricity bills and maximising renewable energy use, even during winter months. Key Features of SunSynk 3.6kW Hybrid Inverter Dual MPPT Design: Ensures optimal solar production and energy harvesting. High Compatibility: Works with Lithium-ion and Lead Acid batteries up to 50kWh. Smart Energy Management: Fully programmable power export, automatic Grid-Tied to Off-Grid switching. IP65 Rated: Durable, weather-resistant design suitable for outdoor installation. Anti-Islanding Protection: Safe operation during grid outages. Paralleling Capability: Up to 16 units with the same firmware can operate together. Euro Efficiency: 99.9% for superior energy conversion. Mobile App Integration: Remote monitoring, real-time push notifications, live stats, and custom reporting. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.   Technical Specifications Inverter Specs Rated Power: 3,600 W Max DC Power: 7,000 W Max AC Power (5 mins): 3,960 W Surge AC Power (1 sec): 5,400 W DC Inputs: 2, Max Current: 22 A MPPT Quantity: 2 DC Voltage Range: 125–500 V Connector Type: MC4 Warranty: 5 years Battery Specs – GSL 10.24kWh LiFePO4 Nominal Energy: 10.24 kWh Depth of Discharge: 90% Life Cycles: 6,000 Maximum PV Input: 6,500 W Maximum Charge Current: 100 A Warranty: 10 years Benefits of the SunSynk Hybrid System All-in-One Solar Management: Integrates inverter, solar charger, and battery for uninterrupted power supply. User-Friendly Interface: LCD display for system configuration and monitoring. Flexible Installation: Compatible with standard or external battery packages, easy to transport and install. Safety & Compliance: CE, RoHS, VDE, MSDS, UN38.3, IEC approved. Real-Time Energy Optimisation: Works with Octopus Agile, Flux & Go tariffs to charge batteries at low cost and discharge during peak rates. What’s Included 1 x SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery 9 x Mounting Equipment for Standard Pitched Roof (portrait orientation) 1 x Electrics Pack (solar cables, MC4s, AC/DC isolators, bi-directional meter) Why Choose SunSynk? The SunSynk hybrid inverter system is engineered for longevity, efficiency, and cost savings. With real-time monitoring, remote control, and intelligent energy management, it’s the perfect solution for homeowners looking to maximise solar self-consumption and reduce reliance on the grid.  

10 x panels 5kW solar & 10-40kWh battery storage with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 20kW Typical winter day expected daily generation: 5kW Battery storage charge/discharge rate: 5kW Sunsynk 5kw Data Sheet Sunsynk 5Kw Installation Manual Sunsynk 5Kw Warranty Sunsynk 5Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar pv & battery storage kit includes: 10 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery). 1 x SunSynk On & Off grid 5kW AC ECCO hybrid Inverter. 10 x Mounting equipment for standard pitched roof in portrait orientation. For Alternative mounting requirements please request a quote. 1 x Electrics pack including solar cable, MC4's, pre-terminated cable, AC & DC Isolators, bi-directional meter. Sunsynk 5kW ECCO Hybrid Inverter – Efficient Solar & Backup Power Management The Sunsynk 5kW ECCO Hybrid Inverter is the perfect solution for managing energy from multiple sources, including solar, the main electrical grid, and generators. Compact yet powerful, it brings all the capabilities of the previous Sunsynk model in a smaller, smarter package. Key Features Dual MPPT Design Optimises solar energy harvesting with two independent Maximum Power Point Trackers. Battery Compatibility Works seamlessly with most Lithium-ion (LiFePO4) and Lead Acid batteries. Remote Monitoring via Mobile App Real-time monitoring and control using the Sunsynk or SolarMan App. Durable & Weatherproof IP65-rated for reliable outdoor installation. Automatic Switching Instantly switches between grid-tied and off-grid modes for uninterrupted power. Zero Export Function Prevents excess solar energy from being exported to the grid. Expandable & Scalable Up to 16 units with the same firmware can be connected in parallel. Load Management Essential and non-essential load outputs for customised energy prioritisation. Included Accessories Comes with Wi-Fi data logger and current transformer (CT) for complete system monitoring. Warranty 10-year LiFePO4 battery warranty and 5-year inverter warranty. Technical Specifications Rated Power: 5,000 W Minimum MPPT Voltage: 125 V Maximum MPPT Voltage: 425 V DC Startup/Shutdown Voltage: 150 V Maximum Input Voltage: 500 V Maximum DC Power: 6,500 W Maximum AC Power (5 minutes): 5,500 W Surge AC Power (1 second): 11,000 W Maximum DC Current: 22 A Maximum DC Inputs: 2 Connector Type: MC4 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Battery: GSL 10.24kWh LiFePO4 Product Performance Multi-function inverter/charger/solar system for seamless power management. Uninterruptible power support combining inverter, solar charger, and battery in one compact unit. Configurable LCD display to manage voltage, charging current, and AC/solar charge priorities. Compatible with mains voltage or generator power with auto-restart after AC recovery. Flexible battery capacity options with standard or external battery packages. Wide PV input range with MPPT controller converts solar energy directly to loads. Integrated design allows easy transportation and installation. Built-in overload, over-temperature, and short-circuit protection. CE, RoHS, VDE, MSDS, UN38.3, IEC approved for international standards. Safety & Convenience LiFePO4 Battery Safety: Stable and secure with triple protection at module, pack, and system level. Simple Installation: Modular design, portable by a single person, and space-saving footprint of 0.15 sqm. Cloud & App Integration: Full control via mobile app from anywhere, anytime. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your preferred web browser and search www.sunsynk.net. Real-Time Notifications & Monitoring: Instant alerts for power cuts, generator use, or battery status. Remote Settings & Updates: Modify inverter settings remotely, access OS upgrades, and optimise energy use. Live Stats & Reporting: Track energy usage, generate reports, and optimise system efficiency to save on bills. Smart Integration: Compatible with Octopus Agile, Flux, and Go for dynamic energy pricing and cost savings. Why Choose Sunsynk ECCO 5kW Hybrid Inverter? The Sunsynk ECCO Hybrid Inverter offers a compact, reliable, and intelligent solution for homeowners and businesses. Its hybrid capabilities allow seamless energy management, while mobile app monitoring and smart integration help you save money, reduce grid reliance, and maximise renewable energy usage.

12 x panels 6kW solar & 10-60kWh solar and battery package with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 24kW Typical winter day expected daily generation: 6kW Battery storage charge/discharge rate: 5kW Sunsynk 5kw Data Sheet Sunsynk 5Kw Installation Manual Sunsynk 5Kw Warranty Sunsynk 5Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar and battery package includes: 12 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 5kW ECCO Hybrid Inverter & GSL 10.24kWh Battery Bundle Upgrade your home or business energy system with this all-in-one solar power bundle featuring the SunSynk 5kW ECCO Hybrid Inverter and the GSL 10.24kWh LiFePO4 Battery. This package is designed for efficient energy management, offering reliable performance, seamless integration, and smart monitoring. What’s Included in the Package 1 x SunSynk On & Off-Grid 5kW ECCO Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery 12 x Mounting Equipment (for standard pitched roof, portrait orientation – request a quote for alternative mounting) 1 x Electrics Pack including solar cable, MC4 connectors, pre-terminated cable, AC & DC isolators, and a bi-directional meter SunSynk 5kW ECCO Hybrid Inverter – Key Features Dual MPPT design for maximum solar efficiency Compatible with most Lithium-ion and Lead Acid batteries Zero export function for compliance with grid regulations IP65 rated – suitable for indoor and outdoor installation Automatic switching between Grid-Tied and Off-Grid modes Parallel connection – up to 16 units with the same firmware Integrated Wi-Fi logger & CT included Compatible with the SolarMan App for full monitoring and control Inverter Technical Specs Rated Power: 5,000 W Max DC Power: 6,500 W Max AC Power (5 min): 5,500 W Surge AC Power (1 sec): 11,000 W MPPT Voltage Range: 125 – 425 V Max Input Voltage: 500 V Max DC Current: 22 A Euro Efficiency: 96.5% Integrated DC Switch: Yes GSL 10.24kWh LiFePO4 Battery – Key Features 10-Year Warranty 90% Depth of Discharge (DOD) Up to 6,000 life cycles Safe & stable LiFePO4 chemistry Modular design – easy to install and expand Compact footprint: only 0.15 sqm Remote monitoring via global cloud platform & mobile app Certified: CE, ROSH, VDE, MSDS, UN38.3, IEC Smart Monitoring & Control with the Sunsynk App Real-time push notifications (e.g. power cuts, battery status) Full remote access – change system settings from anywhere Real-time monitoring & live energy usage stats Custom reports & graphs to track savings Integrated with Octopus Agile, Flux & Go tariffs for smart energy management Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Why Choose This Solar Bundle? ✔️ Complete Hybrid Solution – inverter + battery + mounting + electrical pack✔️ Future-Proof – scalable design for growing energy needs✔️ Reliable Performance – 10-year battery warranty, 5-year inverter warranty✔️ Smart Monitoring – control your system remotely via app✔️ Save on Energy Bills – optimise solar usage and reduce reliance on the grid Warranty & Support Battery: 10 Years Inverter: 5 Years UK-based support team & full installation guidance available 🔑 Perfect for homes and small businesses looking to reduce energy costs, ensure backup power, and take control of their renewable energy system.  

14 x panels 7kW solar panel kit with 10-60kWh battery package with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)    Typical summer day expected daily generation: 28kW Typical winter day expected daily generation: 7kW   Battery storage charge/discharge rate: 5kW   Sunsynk 5w Data Sheet Sunsynk 5Kw Installation Manual Sunsynk 5Kw Warranty Sunsynk 5Kw G99 Certificate   Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar and battery package includes: 14 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W   1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery)     SunSynk 5kW Hybrid Inverter & GSL 10.24kWh LiFePO4 Battery Storage Kit Compact, efficient, and future-ready solar power solution 🌞 Reliable Hybrid Solar Energy System The SunSynk 5kW ECCO Hybrid Inverter, combined with the GSL 10.24kWh LiFePO4 battery, delivers a complete, versatile energy storage system. Ideal for residential or small business use, this kit provides seamless energy management between solar panels, the grid, and backup generators, while storing excess energy for when you need it. 📦 What’s Included in the Kit 1 x SunSynk 5kW ECCO Hybrid Inverter (On & Off-Grid) 1 x GSL 10.24kWh LiFePO4 Battery 14 x Mounting Equipment for pitched roof (portrait orientation) 1 x Electrics Pack including: Solar DC cables (pre-terminated) MC4 connectors AC & DC isolators Bi-directional smart meter (Alternative mounting options available on request) ⚡ SunSynk 5kW Hybrid Inverter – Features Compact design with all the power of larger Sunsynk models Dual MPPT design for maximum efficiency Compatible with Lithium-ion & Lead Acid batteries Automatic switchover between grid-tied and off-grid modes Zero export function for compliance with grid regulations Up to 16 inverters in parallel with the same firmware Essential and non-essential load outputs IP65 weatherproof rating for indoor or outdoor install Includes Wi-Fi logger and CT clamp Compatible with SolarMan App for monitoring Inverter Technical Specifications Rated Power: 5,000 W Max DC Power: 6,500 W Surge AC Power (1s): 11,000 W Max AC Power (5min): 5,500 W MPPT Voltage Range: 125–425 V Max Input Voltage: 500 V Startup/Shutdown Voltage: 150 V Max DC Current: 22 A DC Inputs: 2 MPPT Quantity: 2 Euro Efficiency: 96.5% Integrated DC Switch: Yes 🔋 GSL 10.24kWh LiFePO4 Battery – Features Safe & stable: LiFePO4 chemistry with triple protection Long life: 6,000+ cycles at 90% depth of discharge High efficiency: 100A max charge current Compact footprint: Just 0.15m² Modular design: Simple installation and expansion Smart monitoring: Cloud platform & mobile app integration Warranty: 10 years Battery Performance Capacity: 10.24kWh Depth of Discharge (DOD): 90% Cycle Life: 6,000+ cycles Max PV Input Power: 6,500 W Max Charge Current: 100A 📱 Intelligent Monitoring & Control With the Sunsynk App, you gain full control of your hybrid solar system: Real-time notifications – instant alerts for power cuts, generator use, or battery status Remote configuration – change system settings from anywhere with internet access Firmware upgrades – update inverter OS remotely Live monitoring – track usage, solar generation, and battery storage in real time Custom reports & graphs – optimise your energy savings and performance 👉 Fully integrated with Octopus Agile, Flux & Go tariffs, enabling you to automatically optimise charge/discharge cycles to take advantage of the best electricity rates. ✅ Applications Residential solar installations Off-grid or hybrid power setups Small business backup power Energy bill reduction through smart self-consumption 🔒 Warranty 10-Year Battery Warranty 5-Year Inverter Warranty 👉 This complete kit delivers sustainable, flexible, and future-proof energy independence, giving you inverter, battery, mounting gear, and electrical components in one ready-to-install package. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  

16 x panels 8kW solar panel kit & 10-60kWh battery package with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)    Typical summer day expected daily generation: 32kW Typical winter day expected daily generation: 8kW   Battery storage charge/discharge rate: up to 10kWh with 2+ batteries   Sunsynk 8Kw Data Sheet Sunsynk 8Kw Installation Manual Sunsynk 8Kw Warranty Sunsynk 8Kw G99 Certificate   Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar and battery package includes: 16 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W   1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery)     SunSynk 8kW Hybrid Inverter & GSL 10.24kWh LiFePO4 Battery Storage Kit Complete solar power solution with inverter, battery, roof mounting kit, and electrical pack 🌞 Reliable Hybrid Solar Energy System The SunSynk 8kW ECCO Hybrid Inverter, paired with the GSL 10.24kWh LiFePO4 battery, delivers a powerful, flexible and scalable renewable energy system. This complete package enables you to manage power seamlessly from solar panels, the main grid, or a backup generator, while storing excess energy for when you need it most. 📦 What’s Included in the Kit 1 x SunSynk 8kW ECCO Hybrid Inverter (On & Off-Grid) 1 x GSL 10.24kWh LiFePO4 Battery 16 x Mounting Equipment for pitched roof (portrait orientation) 1 x Electrics Pack including: Solar DC cables (pre-terminated) MC4 connectors AC & DC isolators Bi-directional smart meter (Alternative mounting options available on request) ⚡ SunSynk 8kW Hybrid Inverter – Features Dual MPPT design for maximum efficiency Compatible with Lithium-ion & Lead Acid batteries Automatic switchover between on-grid and off-grid Zero export function for grid compliance Up to 16 units in parallel with matching firmware Dedicated outputs for essential & non-essential loads Comes with Wi-Fi logger and CT clamp IP65-rated for indoor or outdoor installation Compatible with SolarMan App for real-time monitoring Inverter Technical Specifications Model: Sunsynk-8.8-K-SG01LP1 ECCO Rated Power: 8,000 W Max DC Power: 10,400 W MPPT Voltage Range: 125–425 V Max Input Voltage: 500 V Startup/Shutdown Voltage: 150 V Max DC Current: 44 A MPPT Inputs: 2 Euro Efficiency: 96.5% Weight: 25 kg Integrated DC Switch: Yes 🔋 GSL 10.24kWh LiFePO4 Battery – Features Safe & stable: LiFePO4 chemistry with triple protection Long life: 6,000+ cycles at 90% depth of discharge High efficiency: 100A max charge current Compact design: Only 0.15m² footprint Simple installation: Lightweight modular design Smart monitoring: Cloud platform & mobile app access Warranty: 10 years Battery Performance Energy Capacity: 10.24kWh Depth of Discharge (DOD): 90% Cycle Life: 6,000+ cycles Max PV Input Power: 6,500 W Max Charge Current: 100A 📱 Monitoring & Control via Sunsynk App Real-time notifications (e.g., power cuts, generator or battery use) Remote settings control – adjust parameters anywhere with internet access Firmware updates – keep your system up-to-date remotely Live stats & monitoring – track energy usage and optimise performance Custom reports & graphs – understand savings and efficiency  Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. ✅ Applications Residential solar energy storage Off-grid or hybrid setups Small business backup power Energy cost reduction through peak shaving & self-consumption 🔒 Warranty 10-Year Battery Warranty 5-Year Inverter Warranty 👉 This kit is a complete solar energy solution, giving you inverter, storage, mounting gear, and electrical components – everything you need for a reliable, future-ready renewable energy system.  

18 x panels 9kW solar & 10-60kWh battery kit with choice of panels Our complete collection of solar / battery kits can be viewed here Installed battery only kits can be viewed here For a bespoke quote or a quote with installation please complete our quote form here (Installation available across most areas of the UK but primarily around NW, London, Yorkshire, Midlands & Scotland)  Typical summer day expected daily generation: 36kW Typical winter day expected daily generation: 9kW Battery storage charge/discharge rate: up to 10kWh with 2+ batteries Sunsynk 8Kw Data Sheet Sunsynk 8Kw Installation Manual Sunsynk 8Kw Warranty Sunsynk 8Kw G99 Certificate Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. Our complete solar and battery package includes: 18 x Solar panels, any solar panels can be selected from our website of up to £65+vat cost price typically 450-525W 1 x GSL 10.24kwh storage (For additional batteries please add to your cart GSL 10.24kw battery) SunSynk 8kW Hybrid Inverter & GSL 10.24kWh Battery Storage Kit Complete solar power solution with inverter, battery, mounting equipment, and full electrical pack 🌞 Reliable Hybrid Solar Power System The SunSynk 8kW ECCO Hybrid Inverter paired with the GSL 10.24kWh LiFePO4 battery provides a powerful and flexible energy storage system for residential and small commercial use. This package enables you to manage power efficiently from solar panels, the grid, or a backup generator, while storing excess energy in a long-lasting lithium battery for when you need it most. 📦 What’s Included in the Kit 1 x SunSynk On & Off-Grid 8kW AC ECCO Hybrid Inverter 1 x GSL 10.24kWh LiFePO4 Battery (10-year warranty, 6,000 cycles, 90% DOD) 18 x Mounting Equipment for standard pitched roof in portrait orientation (alternative mounting available on request) 1 x Electrics Pack including: Solar DC cable & pre-terminated connections MC4 connectors AC & DC isolators Bi-directional smart meter ⚡ SunSynk 8kW Hybrid Inverter – Key Features Dual MPPT design for maximum solar efficiency Works with most Lithium-ion & Lead Acid batteries Automatic switchover between grid-tied and off-grid mode Zero export function for grid compliance Up to 16 units in parallel with same firmware Essential & non-essential loads outputs for power prioritisation Built-in Wi-Fi logger with CT clamp IP65-rated – weather-resistant for indoor/outdoor installation Compatible with SolarMan App for real-time monitoring Inverter Technical Specifications Rated Power: 8,000W Max DC Power: 10,400W MPPT Voltage Range: 125–425V Max Input Voltage: 500V Max DC Current: 44A Euro Efficiency: 96.5% Weight: 25kg Integrated DC Switch: Yes 🔋 GSL 10.24kWh LiFePO4 Battery – Key Features Long-lasting: 6,000+ cycles at 90% DOD Safe & Stable: LiFePO4 chemistry with triple protection Compact: Only 0.15m² footprint Modular: Easy to scale and install Remote Control & Monitoring via Sunsynk App 10-Year Warranty for peace of mind Battery Benefits Real-time system monitoring & live stats Remote system updates & setting changes Generate detailed reports & energy usage graphs Cloud platform with mobile app access anywhere in the world ✅ Applications Residential solar storage Off-grid or hybrid energy systems Small business backup power Energy cost savings with peak-shaving and self-consumption 🔒 Warranty & Support 10-Year Battery Warranty 5-Year Inverter Warranty UK technical support available 👉 This kit gives customers a complete renewable energy solution — inverter, storage, cabling, isolators, and mounting gear included. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.