Solar Panel Mounting Systems

ClickFit EVO Truss Hook #2: ESD-1008045 Mounting - Roof Anchor- Tile & Slates EVO Brochure  EVO Installation Manual Certification Minimum order - 4 ClickFit Evo is a mounting solution for tiled, steel, corrugated and standing seam roofs. Developed by Esdec to be quicker, simpler, and safer, it has a smart click connection that allows for quick and easy installation of solar to the roof. Small number of components and installation steps means that panels can be installed up to 50% quicker. Universal Roof Truss for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting Integrated cable management These can be used in combination with the EPDM Rubber spacer and can also be used alongside the ClickFit EVO Universal hook on the same roof.  Please Note: This roof anchor requires wood screws. These are not provided for by Esdec. It is recommended to use a Dish-shaped wood screw 6x120mm.

GSE In-Roof Pre-compressed seal roll (5m) #2: GSE-FLASH-LAT-DPO-BLA Mounting - In Roof GSE Integration Kit Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Minimum order - 4 This black lateral flashing makes up the sides of the PV array. A continuous line of flashings should be installed on each side of the array and a 15cm overlap distance should be observed between pieces of flashing. 

GSE Rooflex Flexible Sealing Strip 500mm x 5m #2:  GSE-ROOFLEX-5M-0.5M Mounting - In Roof GSE Integration Kit Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Minimum order - 4 This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing components.  Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications

GSE In-Roof Pre-compressed seal roll (5m) #2: GSE-ART106373 Mounting - In Roof GSE Integration Kit Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Minimum order - 4 The pre-compressed seal is used to ensure a complete waterproof perimeter around the PV array. The seal is pressed on to the flashing pieces at the border with the roof tiles.

GSE Clamp Wedges Twin Pack ( 2x Left / 2x Right ) #2:  GSE-WEDGES-TWINPACK Mounting - In Roof GSE Clamp Wedges Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Minimum order - 4

  GSE In-Roof Screw 6.5x60 mm - EPDM - A2 - BLACK #2: GSE-ART106051 Mounting - Wood Screws GSE Integration Kit Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Solar Panel Screw & Washer Set This high-quality screw and washer is designed for secure installation of solar panels and accessories. Ideal for installers and DIY solar projects, each set ensures a strong and reliable connection. Key Features Durable Construction – built to last and withstand outdoor conditions. Easy Installation – simple screw and washer combination for secure fixing. Compatible With Solar Panels – suitable for a range of mounting systems. Minimum Order Quantity – 4 units per order. Why Choose This Screw & Washer Set? Ensure your solar panels and components are safely and reliably mounted with these essential installation accessories. Perfect for professional installers or anyone completing a solar setup at home. Product Details Includes: 1 screw + 1 washer Minimum Order: 4 units

In Roof - Single End Clamp V2023 - H16 - Steel - Black w/EPDM Foam Attached #2:  GSE-CLAMP-SINGLE-H16-V2023-BLA Mounting - Module Clips GSE Clamp Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Minimum order - 4      

Mid Clamp Double V2023 EPDM - H16 %96 Black w/EPDM Foam Attached #2:  GSE-CLAMP-DOUBLE-H16-V2023-BLA Mounting - Module Clips GSE Clamp Data Sheet GSE In Roof System Installation Manual CE Declaration of Conformity Solar Installation Accessory – Minimum Order 4 This high-quality solar installation accessory is designed for reliable and efficient use in residential or commercial solar projects. Ideal for professional installers or DIY solar setups, it ensures consistent performance and durability. Key Features Reliable Performance – built to maintain consistent operation in solar installations. Minimum Order Requirement – 4 units per order. Durable Construction – designed to withstand standard environmental conditions. Why Choose This Product? Perfect for solar installers or DIY enthusiasts, this accessory provides dependable performance and is compatible with a wide range of solar mounting and connection systems.      

FlatFix Fusion Base Profile 210mm #2:  ESD-1007121 Mounting - Base Units Flat Fix Fusion Data Sheet  Flat Fix Fusion Install Manual  ESDEC Configuration Sheet Warranty  Certification Minimum order - 4 FlatFix Fusion – Modular Solar Panel Mounting System Product Overview FlatFix Fusion by Esdec is a modular and flexible solar panel mounting system designed for small and medium-sized roofs. Its innovative modular design allows installers to create a customised configuration for each roof, ensuring optimal panel placement and maximum energy generation. Key Features Dual or Single Configuration: Adaptable setup for various roof layouts. Base Profile: Optimised for row spacing on East/West oriented systems. Maximised Module Coverage: Efficiently increases the number of panels installed per roof, enhancing energy output. Lightweight and Durable: High-quality materials ensure a long-lasting and reliable installation. Installation Benefits Customisable Layout: Flexible module placement to suit roof size and shape. Time-Saving Design: Modular components make installation quicker and more efficient. Compatibility: Works seamlessly with a wide range of solar panels and accessories. Esdec's tightest spacing for East/West. Lightweight aluminium. Gives front to front spacing of 2100mm, 2280mm & 2374mm depending on module width.

Hanger bolt M10 x 200 offset connection (for Timber Purlins) #2: REN-920008 Mounting - Roof Anchor- Hanger Bolts Renusol Hanger Bolt M10 – Timber Purlin Solar Mounting Product Overview The Renusol Hanger Bolt M10 is designed specifically for solar panel installations on timber purlins. It provides a robust and adjustable connection for framed PV modules, ensuring a secure and long-lasting solar mounting solution. Key Features Timber-Specific: Compatible exclusively with timber purlins. Dimensions: M10 x 200mm with offset connection for flexible panel alignment. Thread Specification: M10 diameter, 0.9mm thread, 65mm length for strong anchoring. Adjustment Range: 81mm, allowing precise installation and alignment of solar panels. Installation Notes Suitable for use with Renusol PV mounting systems. Warranty Warning: Using this hanger bolt with non-Renusol components will void the system warranty.

VarioSole Hanger bolt M12 x 250 Wood Substructure 2: REN-860007 Mounting - Roof Anchor- Hanger Bolts Minimum order - 4 Renusol Hanger Bolt M12 with Bracket for Solar PV Systems Overview The Renusol Hanger Bolt M12 with bracket is engineered for secure and durable solar PV installations on wooden purlins. Its high-quality stainless steel construction, integrated sealing collar, and included hardware ensure a weather-resistant and stable mounting solution for VarioSole SE and TriSole systems. Key Features Material: Stainless steel A2 for excellent corrosion resistance. Sealing Collar: 25mm integrated sealing for enhanced waterproofing. Thread: M12 partial thread, 100mm metric thread length, ideal for wood. Hexagon Head: Enables quick and secure tightening. Vertical Adjustment: 91mm adjustment range for precise panel alignment. No Pre-Drilling Required: Install directly into wood up to 8.4mm thickness. Included Components 1 × Hanger bolt M12 x 250 (900002) 1 × Hammerhead bolt M8 x 25 (900007) 1 × Hexagon nut DIN6923 M8 A2-70 with flange and washer (900001) 1 × Standard bracket M12 (400012) Installation Notes Compatible with VarioSole SE and TriSole mounting systems. Using Renusol mounting equipment with other suppliers’ components will void the warranty.

VarioSole Hanger bolt M12 x 300 Wood Substructure #2: REN-860017 Mounting - Roof Anchor- Hanger Bolts Minimum order - 4 Renusole Catalouge Renusole VS System Datasheet Renusole Hanger Bolt Manual Renusole Warranty Renusol Hanger Bolt M12 with Bracket Overview The Renusol Hanger Bolt M12 with Bracket is a high-quality mounting solution for solar panels on corrugated and trapezoidal metal roofs. Designed for stability and precision, it provides a reliable foundation for both residential and commercial PV installations. Key Features Durable Construction: Made from premium materials for long-lasting performance. Adjustable Reach: Provides 141mm of adjustment to accommodate roof variations and ensure perfect panel alignment. Optimal Bolt Length: 300mm for secure and flexible installation. Versatile Compatibility: Works seamlessly with Renusol PV mounting systems. Installation Notes Easy to install directly into metal roofing using included screws. Warranty Advisory: Using this bracket with non-Renusol equipment will void the warranty.

MetaSole+ Sheet thickness: FE 0.50-1.50 mm, AL 0.5-2.00mm 2 x screws included #2: REN-420402 Mounting - Roof Anchor- Trapezoidals Renusole Catalog Renusole Installation Guide Part 1 Renusole Installation Guide Part 2  Renusole Warranty Minimum order - 4 Renusol Metasole mounting system Renusol Roof Anchor for Trapezoidal & Corrugated Metal Roofs Overview The Renusol Roof Anchor is a high-quality mounting solution designed for trapezoidal, IBR, and corrugated metal roofs. Ideal for landscape-mounted solar panels, this anchor supports framed PV modules with heights from 30–50mm, ensuring safe and efficient solar installations on a variety of metal roof types. Key Features Compatible with Landscape Solar Panels: Supports framed PV modules from 30 to 50mm frame height. Durable and Reliable: Constructed for long-lasting performance in diverse environmental conditions. Direct Roof Installation: Fits directly onto metal roofing using included self-tapping and thread-forming screws. Versatile Roof Use: Suitable for trapezoidal, IBR, and corrugated sheet metal roofs. Installation & Components Simple Setup: No additional drilling or adapters needed. Included Hardware: Self-tapping and thread-forming screws come with the mounting bracket for fast and secure installation. Warranty Information Important Note: Do not combine Renusol mounting equipment with products from other suppliers, as this will void the warranty of the mounting system.

MetaSole+ PORTRAIT rail 350mm long #2: REN-420420 Mounting - Roof Anchor- Trapezoidals Renusole Catalouge Renusole Metasole Portrait Datasheet   Renusole Metasole Portrait Installation Manual   Renusole Product Warranty Minimum order - 4 Renusol Metasol+ Portrait Mounting System – 350mm Overview The Renusol Metasol+ Portrait Mounting System is engineered for trapezoidal steel and aluminium roofs, providing a secure and efficient solution for vertical (portrait) solar panel installations. Designed for residential and commercial PV systems, this system ensures fast, reliable setup with minimal components. Features Vertical PV Module Orientation: Ideal for portrait (standing) solar panel configurations. Short Rail Design: 350mm rails for flexible and modular installation. No Pilot Drilling Needed: Self-tapping screws fix the system directly to trapezoidal sheets. Wide Module Compatibility: Supports PV module frame heights between 30–50mm. Efficient Roof Adaptation: Maximum distance of 320mm between raised trapezoidal ridges. Durable Construction: High-quality materials ensure long-lasting performance. Installation & Components Included in Kit: 1 x 350mm Long Rail 4 x REN-400301 Self-Tapping Screws Installation: Mount directly onto trapezoidal steel or aluminium sheets without additional pilot drilling. Important Notes Warranty Compliance: Do not use Renusol equipment with mounting products from other suppliers. Doing so will void the system warranty.

MetaSole+ PORTRAIT rail 400mm long #2: REN-420421 Mounting - Roof Anchor- Trapezoidals Renusole Catalog Renusole Metasole Portrait Datasheet   Renusole Metasole Portrait Installation Manual   Renusole Product Warranty Minimum order - 4 Metasol+ Portrait Rail 400mm – Solar Mounting System Overview The Metasol+ Portrait Rail 400mm is a durable and easy-to-install solar panel mounting solution for trapezoidal steel and aluminium roofs. Designed for portrait PV module orientation, this system eliminates the need for continuous rails and allows for fast, secure installation directly onto metal roofing. Ideal for both residential and commercial solar installations. Key Features Vertical Panel Orientation: Optimised for portrait solar panel setups. No Drilling Required: Self-tapping screws attach directly to trapezoidal sheets. Flexible Module Compatibility: Supports PV modules with frame heights of 30–50 mm. Ridge Spacing Flexibility: Suitable for roof ridges spaced up to 370 mm apart. Ready-to-Install Kit: Includes all components for steel and aluminium roofs of various thicknesses. Technical Specifications Rail Length: 400 mm Included Components: 1 x 400mm long rail 4 x self-drilling screws (Aluminium 0.50–1.25 mm / Steel 0.40–1.25 mm) Installation: Direct attachment to metal roofing using included self-tapping screws. Warranty & Compatibility Important: Renusol mounting equipment must not be combined with other suppliers’ products, as this will void the warranty.

MetaSole+ LANDSCAPE - High Top #2: REN-420423 Mounting - Roof Anchor- Trapezoidals Renusole Catalog Minimum order - 4 Metasol+ Landscape – High Top Mounting System Overview The Metasol+ Landscape High Top mounting system is engineered to raise PV modules from the roof surface, improving airflow and solar panel efficiency in high temperatures. Perfect for trapezoidal steel and aluminium sheets, this system provides a lightweight, cost-effective, and material-saving solution for solar installations. Key Features Optimised Ventilation: Elevates PV modules to enhance performance in hot conditions. Landscape Orientation: Designed for horizontal PV module installation. Short, Non-Continuous Rails: Reduces material usage while maintaining stability. Frame Compatibility: Supports PV modules with a frame height of 30–50 mm. Easy Installation: Self-tapping screws fix the system directly to trapezoidal sheets; no pilot drilling required. Technical Specifications Rail length: 125 mm Rail height: 72 mm Compatible roof thickness: Trapezoidal steel: 0.4–1.25 mm Aluminium sheet: 0.5–2.00 mm Includes: 1 x High Top Mounting Plate and 2 x screws Warranty & Compatibility Important: Do not use Renusol mounting equipment with products from other suppliers, as this will void the warranty.