Newest Products

Solis S6 15kW Three Phase Hybrid High Voltage Inverter  #2:SOL-S6-EH3P15K-H Storage Systems - Hybrid Inverter Solis S6 15kW Inverter Data Sheet Solis S6 15kW Inverter Manual & Install Guide Solis S6 15kW Inverter Warranty Solis S6 Battery Compatibility List *Collections are not permitted due to health & safety regulations*  Please note: This includes 3 current sensors for direct connection to the  inverter. The Solis S6 Hybrid inverter offers flexibility with its 3 or 4 MPPTs. Its high input current ensures compatibility with modern high-performance modules. If there is power grid failure, the integrated switching device means selected loads can still be supplied with emergency power. Product Features Integrated 3 or 4 MPPTs for multiple array orientations 50A per 10kW maximum charge/discharge rating String current up to 20A 10 second 200% surge power backup capability Supports maximum of 6 pcs in parallel Supports unbalanced and half-wave loads on the grid and backup port Supports peak shaving control  Automatic UPS switching AC coupling scheme, able to upgrade existing grid connected systems Up to 6 customised charge/discharge settings Specs Weight: 31.7 kg Rated Power: 15,000 W Min PPT Voltage: 200 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 24,000 W Max AC Power (5 Minutes): 15,000 W Surge AC Power (1 Second): 15,000 W Max DC Current: 52 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.7% Transformer: none MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years  

Solis S6 10kW 3PH High Voltage Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-10.0K-H-EU Storage Systems - Hybrid Inverter Solis S6 10kW Inverter Data Sheet Solis S6 10kW Inverter Manual & Install Guide Solis S6 10kW Inverter Warranty Solis S6 10kW G100 Certificate *Collections are not permitted due to health & safety regulations*  Please note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3PH meter from Eastron. The Solis S6 Hybrid inverter offers flexibility with its 3 or 4 MPPTs. Its high input current ensures compatibility with modern high-performance modules. If there is power grid failure, the integrated switching device means selected loads can still be supplied with emergency power. Product Features Integrated 3 or 4 MPPTs for multiple array orientations 50A per 10kW maximum charge/discharge rating Automatic UPS switching Supports peak shaving mode Pre-made battery, meter and CAN cabling reducing install time Supports unbalanced and half-wave loads on the grid and backup port Compatible with multiple brands of lithium battery brands Increased battery protection and operational features  to preserve battery life Specs Weight: 31.8 kg Rated Power: 10,000 W Min PPT Voltage: 200 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 16,000 W Max AC Power (5 Minutes): 11,000 W Surge AC Power (1 Second): 12,000 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.7% Transformer: none MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years  

Solis S6 8kW 3PH High Voltage  Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-8.0K-H-EU  Storage Systems - Hybrid Inverter Solis S6 8kW Inverter Data Sheet Solis S6 8kW Inverter Manual & Install Guide Solis S6 8kW Inverter Warranty Solis S6 8kW G100 Certificate *Collections are not permitted due to health & safety regulations*  Please note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3PH meter from Eastron. The Solis S6 Hybrid inverter offers flexibility with its 3 or 4 MPPTs. Its high input current ensures compatibility with modern high-performance modules. If there is power grid failure, the integrated switching device means selected loads can still be supplied with emergency power. Product Features Integrated 3 or 4 MPPTs for multiple array orientations 50A per 10kW maximum charge/discharge rating Automatic UPS switching Supports peak shaving mode Pre-made battery, meter and CAN cabling reducing install time Supports unbalanced and half-wave loads on the grid and backup port Compatible with multiple brands of lithium battery brands Increased battery protection and operational features  to preserve battery life Specs Weight: 31.8 kg Rated Power: 8,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 12,800 W Max AC Power (5 Minutes): 8,800 W Surge AC Power (1 Second): 9,600 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 6 Euro Efficiency: 97.7% Transformer: none MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years  

Solis S6 6kW 3PH High Voltage  Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-6.0K-H-EU  Storage Systems - Hybrid Inverter Solis S6 6kW Inverter Data Sheet Solis S6 6kW Inverter Manual & Install Guide Solis S6 6kW Inverter Warranty Solis S6 6kW G100 Certificate *Collections are not permitted due to health & safety regulations*  Please note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3PH meter from Eastron. The Solis S6 Hybrid inverter offers flexibility with its 3 or 4 MPPTs. Its high input current ensures compatibility with modern high-performance modules. If there is power grid failure, the integrated switching device means selected loads can still be supplied with emergency power. Product Features Integrated 3 or 4 MPPTs for multiple array orientations 50A per 10kW maximum charge/discharge rating Automatic UPS switching Supports peak shaving mode Pre-made battery, meter and CAN cabling reducing install time Supports unbalanced and half-wave loads on the grid and backup port Compatible with multiple brands of lithium battery brands Increased battery protection and operational features  to preserve battery life Specs Weight: 31.8 kg Rated Power: 6,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 9,600 W Max AC Power (5 Minutes): 6,600 W Surge AC Power (1 Second): 7,200 W Max DC Current: 48 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.7% Transformer: n/a MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years  

Solis S6 5kW 3PH High Voltage Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-5.0K-H-UK Storage Systems - Hybrid Inverter Solis S6 5kW Inverter Data Sheet Solis S6 5kW Inverter Manual & Install Guide Solis S6 5kW Inverter Warranty Solis S6 5kW G100 Certificate Solis Hybrid Inverter – Flexible, Efficient, and Reliable The Solis Hybrid Inverter combines high efficiency, emergency power capability, and compatibility with modern high-performance PV modules. Designed for both residential and small commercial installations, it ensures maximum energy yields while providing seamless backup during grid failures. Advanced Multi-MPPT Technology 3 or 4 MPPTs for multiple array orientations High input current to support modern, high-efficiency PV modules Supports unbalanced and half-wave loads on both grid and backup circuits Backup Power and Smart Features Automatic UPS switching for uninterrupted power to selected loads Supports peak shaving mode to optimise self-consumption Pre-made battery, meter, and CAN cabling for reduced installation time Compatible with multiple lithium battery brands Safe, Efficient, and Reliable Increased battery protection and operational features to extend battery life Maximum charge/discharge rating: 50A per 10kW Integrated DC switch and MC4 connectors for secure operation Technical Specifications Specification Details Weight 31.8 kg Rated Power 5,000 W Min PPT Voltage 160 V Max PPT Voltage 850 V DC Startup Voltage 160 V DC Shutdown Voltage 160 V Max Input Voltage 1,000 V Max DC Power 8,000 W Max AC Power (5 min) 5,500 W Surge AC Power (1 sec) 6,000 W Max DC Current 48 A Max DC Inputs 3 MPPT Quantity 3 DC Fuses None Euro Efficiency 97.5 % Transformer None Connector MC4 (4 included) Warranty 5 years Included Accessories S2-WL-ST data logger stick for WiFi & LAN connectivity 3-phase meter from Eastron for accurate monitoring The Solis Hybrid Inverter offers flexible installation, high efficiency, and smart backup functionality, making it ideal for modern solar PV systems seeking both performance and reliability.

Sunsynk W5.3 Battery Module 5.32kWh Battery Wall Mounted or rack mounted IP65 suited for colder conditions #5: SUNSYNK-W5.3 (Compatible with Lifelynk & L5.3) Sunsynk W5.3 Data Sheet Sunsynk W5.3 Manual To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk W5.3 Battery Installation Project At ITS Technologies, we specialise in delivering reliable solar and battery storage installations across the UK. This project features the Sunsynk W5.3 IP65 battery, a versatile energy storage solution built for durability, efficiency, and real-world performance. Why Choose the Sunsynk W5.3? The Sunsynk W5.3 battery is available in 5.32kWh and 10.64kWh capacities, making it suitable for a wide range of residential and commercial applications. Powered by LiFePO4 (lithium iron phosphate) technology, it offers superior safety, longevity, and energy efficiency. Designed to perform in tough conditions, the W5.3 charges at temperatures as low as -10°C and discharges down to -20°C. For added protection, it comes with an integrated 125A MCB (Miniature Circuit Breaker), ensuring safe and reliable operation. Key Features of the Sunsynk W5.3 Technical Highlights: 5.32kWh W-Series Battery (SUNSYNK-W5.3) LiFePO4 battery chemistry for maximum cycle life Operates in extreme temperatures (-10°C charging, -20°C discharging) Built-in 125A double-pole MCB for added safety IP65 rated – suitable for outdoor installation Scalable system – connect up to 32 batteries in parallel 90% Depth of Discharge (DoD) Optional cell-level monitoring for advanced performance tracking Flexible installation – wall-mounted or rack-mounted Supplied with battery-to-battery and battery-to-inverter cables as standard  

SPECIAL OFFER Sunsynk battery storage 5Kw On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-5KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 120A Victron Lynx for 2+ batteries   Sunsynk 5kWw Data Sheet Sunsynk 5kW Installation Manual Sunsynk 5kW Warranty Sunsynk 5kW G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package!Product Features: Dual MPPT design Compatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Rated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 6,500 WMax AC Power (5 Minutes): 5,500 WSurge AC Power (1 Second): 11,000 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kWh Powerwall battery The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print. Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money. The GSL 10.24kWh Powerwall battery offers versatile energy storage, suitable for both wall and floor mounting. It includes necessary cables and a base, ensuring compatibility with Sunsynk, Victron, and Voltronic hybrid inverters. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

Sunsynk ECCO 3.6kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1:SUN-3.6-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 80A Victron Lynx for 2+ batteries Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk Warranty Sunsynk 3.6Kw G99 Certificate GSL 10.24kWh Powerwall datasheet Please view our battery storage information page for sizing and selecting the right battery storage system for you. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;Dual MPPT design Compatible with Lithium-ion batteries and Lead Acid batteriesUp to 50kWh battery pack5yr warranty as standardIP65 ratedAnti-islanding protectionFully programmable power exportAutomatic switching from Grid-Tied to Off-Grid modeUp to 16 units with the same firmware can be paralleled Rated Power: 3,600 WMin PPT Voltage: 125 VMax PPT Voltage: 500 VDC Startup Voltage: 150 VDC Shutdown Voltage: 125 VMax Input Voltage: 500 VMax DC Power: 7,000 WMax AC Power (5 Minutes): 3,960 WSurge AC Power (1 Second): 5,400 WMax DC Current: 22 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 0Euro Efficiency: 99.9 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kWh Powerwall battery The GSL 10.24kWh Powerwall battery offers versatile energy storage compatible with a large range of inverters. , Battery to battery and battery to inverter cables are included. Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print. Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter.   Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money. The GSL 10.24kWh Powerwall battery offers versatile energy storage, suitable for both wall and floor mounting. It includes necessary cables and a base, ensuring compatibility with Sunsynk, Victron, and Voltronic hybrid inverters. Key Features: Integrated inverter, solar charger, and battery functions for uninterrupted power. Configurable LCD display for input voltage and battery charging settings. Supports mains voltage or generator power with auto-restart. Flexible battery capacity with options for standard or external batteries. MPPT controller for efficient solar energy conversion. Easy transportation and installation. Comprehensive protection features. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel. Enhance your energy management with the GSL 10.24kWh Powerwall battery, designed for optimal performance and flexibility.

Example Installation – Sunsynk Hybrid Battery Storage (This is an example of one of our installations. This system is not available for free, so please do not purchase.) This installation demonstrates a residential solar and battery storage setup in Woking, designed to store energy from cheap night-time electricity and provide power during daytime usage. System Overview The project highlights the efficiency of the Sunsynk 3.6kW ECCO hybrid inverter, paired with GSL lithium batteries, providing reliable energy storage and maximising self-consumption. System Specifications Hybrid Inverter: Sunsynk 3.6kW ECCO Battery Storage: 10.24kWh GSL lithium batteries This example shows how a compact hybrid system can deliver energy independence and cost savings for homeowners. For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

Example Installation – Hybrid Solar & Battery Storage (This is an example of one of our installations. This system is not available for free, so please do not purchase.) This installation showcases a residential solar and battery storage setup in Taunton, designed to provide reliable energy storage and maximise electricity savings using off-peak charging. System Overview The customer required approximately 20kWh of battery storage with a hybrid inverter capable of handling high energy demands. The solution featured dual Sunsynk 3.6kW ECCO hybrid inverters paired with high-capacity GSL lithium batteries, delivering efficient and flexible energy management. System Specifications Hybrid Inverters: 2 × Sunsynk 3.6kW ECCO Battery Storage: 2 × 10.24kWh GSL lithium batteries This example highlights how combining multiple hybrid inverters and high-capacity batteries can increase energy independence and reduce reliance on the grid. For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

Zappi  Multiphase ev charger 7kw to 22kw tethered black #2: MYEN-ZAPPI-2H22TB-G EV Charging - EV Charger   Zappi  Data Sheet Zappi G quick installation manual Zappi G Installation Manual *Collections are not permitted due to health & safety regulations* 7-22kW Multiphase Eco-smart untethered EV Charger in Black Charge your EV with your PV! Myenergi’s latest innovation, the zappi multiphase, brings flexible charging options to suit diverse needs. With selectable power settings of 7kW and 22kW, this charger adapts seamlessly to single or three-phase electrical setups, delivering efficient, high-speed charging tailored to every user’s setup. Multiphase Overview. Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Zappi G range now featuring  6.5m cable Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingFor use with 1-phase and 3-phase mains supplyOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warranty  Built in Wifi and ethernet socket, for connection to the internet (no Hub required)

Enphase Envoy-S Metered Multiphase with 2xCTs #2: ENV-S-EM-230 Inverters - Micro Inverter Gateway Enphase Envoy-S Datasheet Enphase Envoy-S Manual Enphase Envoy-S Warranty   This Enphase Multiphase Envoy-S Metered communications gateway delivers solar production and energy consumption data to Enphase Enlighten monitoring and analysis software. The Envoy-S  is a comprehensive remote maintenance and management of the Enphase system. The Envoy-S platform for total energy management integrates with the Enphase AC Battery. For single and multi-phase metering. Please note: For a three-phase one extra CT is required and need to be ordered separately.

GROWATT MIN 6000TL XH Dual MPPT with DC #2: GROWATT-MIN6000-TL-XH Inverters - Main Units   6000 TL XH Growatt Datasheet 6000 TL XH Growatt Manual 6000 TL XH Growatt Warranty Card 6000 TL XH Growatt G100 Certification *Collections are not permitted due to health & safety regulations* Growatt inverters are specifically designed for residential rooftop applications. With a maximum efficiency of 98%, these inverters are well suited for domestic installations.  Key features Cutting edge technology Double MPPT Tracker - tracking accuracy above 99.5% Maximum efficiency 98% Transformerless  design and high power density, offer lighter and more convenient installation Power factor continuously adjustable Flexible communication connection 10 year warranty   Specs Weight: 11kg Rated Power: 6,000 W Min PPT Voltage: 100 V Max PPT Voltage:  550 V DC Startup Voltage:  100 V DC Shutdown Voltage: 80 V Max Input Voltage:  550 V Max DC Power: 8,100 W Max AC Power (5 mins) 6,000 W Surge AC Power (1 sec) 6,000 W Max DC Current: 27 A Max DC Inputs: 2 Has DC fuses: 0 Connector: Amphenol H4 Included Connectors: 2 Euro Efficiency: 97.5% Transformer: None MMPT Quality: 2 Has integrated DC switch: Yes Please note: To achieve anti reflux function on TL-X and TL-XE range, you must use Meter SPM-E. Using a CT clamp to achieve this is not possible. Please note: An Installer Code Policy is being introduced in the UK and Ireland. This means that all installers need to register an ‘Installer Code’ in order to use the Growatt monitoring platform. The installer code can be provided to the end user by the installer so that you the customer can view the installer-level monitoring account from your own devices.

GROWATT MIN 5000TL XH Dual MPPT with DC #2: GROWATT-MIN5000-TL-XH  Inverters - Main Units   5000 TL XH Growatt Datasheet 5000 TL XH Growatt Manual 5000 TL XH Growatt Warranty Card 5000 TL XH Growatt G100 Certification *Collections are not permitted due to health & safety regulations* Growatt inverters are specifically designed for residential rooftop applications. With a maximum efficiency of 98%, these inverters are well suited for domestic installations.  Key features Cutting edge technology Double MPPT Tracker - tracking accuracy above 99.5% Maximum efficiency 98% Transformerless  design and high power density, offer lighter and more convenient installation Power factor continuously adjustable Flexible communication connection 10 year warranty   Specs Weight: 11kg Rated Power: 5,000 W Min PPT Voltage: 100 V Max PPT Voltage:  550 V DC Startup Voltage:  100 V DC Shutdown Voltage: 80 V Max Input Voltage:  550 V Max DC Power: 7,000 W Max AC Power (5 mins) 5,000 W Surge AC Power (1 sec) 5,000 W Max DC Current: 27 A Max DC Inputs: 2 Has DC fuses: 0 Connector: Amphenol H4 Included Connectors: 2 Euro Efficiency: 97.5% Transformer: None MMPT Quality: 2 Has integrated DC switch: Yes Please note: To achieve anti reflux function on TL-X and TL-XE range, you must use Meter SPM-E. Using a CT clamp to achieve this is not possible. Please note: An Installer Code Policy is being introduced in the UK and Ireland. This means that all installers need to register an ‘Installer Code’ in order to use the Growatt monitoring platform. The installer code can be provided to the end user by the installer so that you the customer can view the installer-level monitoring account from your own devices.

GROWATT MIN 3000TL XH Dual MPPT with DC #2: GROWATT-MIN3600-TL-XH Inverters - Main Units   3600 TL XH Growatt Datasheet 3600 TL XH Growatt Manual 3600 TL XH Growatt Warranty Card 3600 TL XH Growatt G100 Certification *Collections are not permitted due to health & safety regulations* Growatt inverters are specifically designed for residential rooftop applications. With a maximum efficiency of 98%, these inverters are well suited for domestic installations.  Key features Cutting edge technology Double MPPT Tracker - tracking accuracy above 99.5% Maximum efficiency 98% Transformerless  design and high power density, offer lighter and more convenient installation Power factor continuously adjustable Flexible communication connection 10 year warranty   Specs Weight: 11kg Rated Power: 3,600 W Min PPT Voltage: 100 V Max PPT Voltage:  550 V DC Startup Voltage:  100 V DC Shutdown Voltage: 80 V Max Input Voltage:  550 V Max DC Power: 5,040 W Max AC Power (5 mins) 3,600 W Surge AC Power (1 sec) 3,600 W Max DC Current: 27 A Max DC Inputs: 2 Has DC fuses: 0 Connector: Amphenol H4 Included Connectors: 2 Euro Efficiency: 97.2% Transformer: None MMPT Quality: 2 Has integrated DC switch: Yes Please note: To achieve anti reflux function on TL-X and TL-XE range, you must use Meter SPM-E. Using a CT clamp to achieve this is not possible. Please note: An Installer Code Policy is being introduced in the UK and Ireland. This means that all installers need to register an ‘Installer Code’ in order to use the Growatt monitoring platform. The installer code can be provided to the end user by the installer so that you the customer can view the installer-level monitoring account from your own devices.

GROWATT solar inverter MIN 3000TL XH Dual MPPT with DC #2:GROWATT-MIN3000-TL-XH Inverters - Main Units   3000 TL XH Growatt Datasheet 3000 TL XH Growatt Manual 3000 TL XH Growatt Warranty Card 3000 TL XH Growatt G100 Certification   *Collections are not permitted due to health & safety regulations* Growatt inverters are specifically designed for residential rooftop applications. With a maximum efficiency of 98%, these inverters are well suited for domestic installations.  Key features Cutting edge technology Double MPPT Tracker - tracking accuracy above 99.5% Maximum efficiency 98% Transformerless  design and high power density, offer lighter and more convenient installation Power factor continuously adjustable Flexible communication connection 10 year warranty   Specs Weight: 11kg Rated Power: 3,000 W Min PPT Voltage: 100 V Max PPT Voltage:  500 V DC Startup Voltage:  100 V Max Input Voltage:  500 V Max DC Power: 4,200 W Max AC Power (5 mins) 3,000 W Surge AC Power (1 sec) 3,000 W Max DC Current: 27 A Max DC Inputs: 2 Has DC fuses: 0 Connector:Amphenol H4 Included Connectors: 2 Euro Efficiency: 97.1% Transformer: None MMPT Quality: 2 Has integrated DC switch: Yes Please note: To achieve anti reflux function on TL-X and TL-XE range, you must use Meter SPM-E. Using a CT clamp to achieve this is not possible. Please note: An Installer Code Policy is being introduced in the UK and Ireland. This means that all installers need to register an ‘Installer Code’ in order to use the Growatt monitoring platform. The installer code can be provided to the end user by the installer so that you the customer can view the installer-level monitoring account from your own devices.