Newest Products

Enphase Q cable branch terminator cap for waterproofing the end of each branch of microinverters.#1: EN-Q-TERM-R Minimum order: 4 units One required per branch.

Q Cable Disconnect Tool (1 Item)#1: EN-Q-DISC Tools - Accessories#3: 3419Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount.Orders only with other enphase components

Enphase Field-wireable connectors (Male) single#2: EN-Q-CONN-R-1M Cables - Connectors#3: 3131 Minimum order: 4 Units Field-Wireable Connectors Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types

Enphase Field-wireable connectors (Female) single#1: EN-Q-CONN-R-1F Cables - Connectors#3: 3132 Minimum order: 4 Units Field-Wireable Connectors Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types

Current Transformer for Solis 4G range 100A 10m#1: SOL-CT-100A-10M Display - Current Sensor Clamps#4: Solis-CT-10M 100A Current Transformer for Solis single phase 4G, 5G and 6S range. This CT is required for export limitation feature of the inverters to work. This CT is for the single phase inverters only.

Double pair genuine RS485 cable 1M - 4 cores Part No: RS485-DOUBLE-1M Storage Systems - Communication CablePRICE PER METERLSZH 440Series 2x2x24awg RS-485 600 V – TREND system use : BACnet ® over MS/TPCable Construction Conductor - Stranded tinned copper wire, 24awg Insulation - Polyethylene (PE) Formation - 4 cores twisted as two pairs. BLUE/white - WHITE/blue and ORANGE/white - WHITE/orange Screen - Overall Aluminium/Polyester tape Drain Wire - Stranded tinned copper wire, 24awg Braid - Tinned copper wire braid, 80% coverage Outer Jacket - LSZH FireFighter ® UV-Stable

1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection #1: SE-WND-3Y400-MB-K2 Display - Energy Meter#2: SolarEdge Energy Meter with Modbus Connection#3: SE-WND-3Y400-MB-K2 Energy Meter K2 Inverter Data Sheet Energy Meter K2 Installation Manual Energy Meter K2 Warranty Energy Meter K2 G100 Certification*Collections are not permitted due to health & safety regulations* Modbus Meter for SolarEdge Installations - High accuracy meter readings for production/consumption monitoring- Import/Export meter readings for export limitation functionality- Small and easy to install - fits in standard electrical panel- Supports residential, commercial and utility-size installationsThis is a new -K2 part with updated firmware to support CT disconnection required to meet UK G100 Feed In Limitation requirements. Please note actual product may look slightly different to image shown.The Modbus meter requires CTs to function. Please choose the appropriate current capacity from the Modbus range

SolarEdge Power Management package <100A grid supply#2: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#3: 2111#3086#4: SE-WND-3Y400-MB-K2This part is made up of the following items:1 x 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection SKU: #1: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#2: SolarEdge Energy Meter with Modbus Connection#3: SE-WND-3Y400-MB-K2 1 x 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection SKU: #1: SE-ACT-0750-100 Display - Current Sensor Clamps#3: SECT-SPL-100A-A10 x Double pair genuine RS485 cable 1M - 4 cores SKU: #1: RS485-DOUBLE-1M This kit is a full monitoring package for Solaredge domestic systems that allows full recording and display of energy generation and usage. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption.Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 100kWp PV system with 85kW of inverters could be limited to 75kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday - Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this 'lost' energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times.Note: This package includes an energy meter and 100A CT for a single inverter system. For a system with multiple inverters depending on inverter type, an additonal RS-485 expansion kit might be required. This allows multiple inverters to be connected in a communication bus and also to the energy meter.A 10m length of RS-485 cable is included for connection between the inverter and energy meter, and for connecting the inverters in the bus. Please check if this quantity is sufficient.Supplied with 1 X 100A current monitoring clamps suitable for installation on properties with up to 100A per phase power supply.Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note other CTs are available.

Renusol Console+ bucket for flat roof or ground #2: REN-520075-K#3: 2089 Renusol Brochure Renusol Datasheet Renusol ConSole+ 5200 75 K – Ballasted Flat Roof Mounting System The Renusol ConSole+ 5200 75 K is a reliable and cost-effective mounting solution for PV modules on flat roofs and ground-mounted systems. Designed with a 15° tilt angle, it ensures optimal energy generation while avoiding roof penetration, making it ideal for commercial and residential applications. Key Features Tilt Angle of 15° – improves solar yield on flat surfaces. Non-Penetrative Mounting – no damage to roofing surfaces, making it suitable for up to 5° roof pitch. Ballasted Stability – weighed down using gravel, paving slabs, or similar ballast to resist wind and snow loads. Universal Fit – compatible with most framed PV modules within the supported dimensions. Durable Materials – constructed with HDPE, aluminium, and stainless steel for long-lasting performance. ⚠️ Note: Minimum order: 4 units For panels wider than 1014mm, elongation rails are required. Technical Data Colour: Black Material: HDPE, Aluminium & Stainless Steel Suitable for: Flat-roof and ground-mounted installations Tilt Angle: 15° Max Module Length: 1550 – 2150 mm Hole Gap (Width): 895 – 1014 mm Hole Gap (Length): 690 – 1180 mm Contents Included 1 × 500075 ConSole+ 2 × 400005 ConSole U-Profile 1035 mm 4 × 900027 Hexagon Screw DIN933-M6x20 A2-70 4 × 900028 Washer DIN9021-6,4-A2 4 × 900029 Self-locking Hexagon Nut DIN985-M6-A2 4 × 900106 ConSole Clip 4 × 900115 Hexagon Screw DIN7504-ST5,5x25-A2-SW8 Why Choose Renusol ConSole+? The Renusol ConSole+ 5200 75 K provides a simple, reliable, and durable way to mount solar modules on flat roofs without drilling or penetration. By using ballast for stability, it ensures a secure installation that adapts to different site conditions while protecting roof integrity.

Q-Cable round AC Branch Terminator (1 Item)#1: EN-Q-TERM-3P Accessories - Cable termination capsEnphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit. Single item only.

Enphase Q Cable 1ph 1m Portrait#1: EN-Q-25-10-1 Cables - Single Phase AC Cable#3: 3129 Minimum order: 4 Units Enphase Q Cable 1ph 1.3m Portrait (price per connector)

Enphase Envoy-S Communication Gateway, 230VAC#2: EN-S-WB-230-UK  The Enphase Envoy-S is an integral component of the Enphase Microinverter System. It operates between the Enphase Microinverters and the Enphase Enlighten web-based monitoring and analysis software. The Envoy-S monitors the microinverters that are connected to the PV modules. It collects energy and performance data from the inverters over on-site AC power lines and then forwards the data to Enlighten to give statistical data on how a solar PV system is performing. For guidance on installation please read the Installation Sheet.Metered version with ct clamps.

Tigo Optimiser TS4 Add-On Module - Optimised #1: TS4-A-O Inverters - Optimisers#3: 2298 Tigo Optimiser Data Sheet Tigo Optimiser User Manual Tigo Optimiser Warranty Tigo Optimiser Certification Minimum order: 4 Units   PV Module Advanced Add-On/RetrofitThe TS4-A-O (Optimization) is the advanced add-on/retrofit optimization solution that brings smart module functionality to standard PV modules for higher reliability. Improve energy efficiency by upgrading underperforming PV systems or adding smart features to new installations.The TS4-A-O with UHD-Core technology and expanded specifications supports PV modules up to 500W.Easy InstallationSnap to standard module frame or remove brackets for rack mountingSmart CommissioningConfigure and commission with your Android or iOS mobile device

Tigo Cloud Connect Advanced Kit with TAP- Indoor #2: TIGO-CLOUDCON-TAP Display - Web Interfaces#3: 2672 Tigo Datasheet Tigo Manual Tigo Warranty *Collections are not permitted due to health & safety regulations* Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply.CLOUD CONNECT ADVANCED (CCA)COMPACT DATA LOGGER- Collect data from up to 900 TS4 units- Supports wired and wireless networks- Control monitoring and safety features- Configure and commission with Tigo SMART app- Monitor 3rd party devices via Modbus- Can communicate with up to 7 TAPsTIGO ACCESS POINT (TAP)WIRELESS ACCESS POINT- Collect data from up to 300 TS4 units- Wireless mesh communication- High definition sampling rate- Scalable architecture- Mounts easily on module frame without tools

Solis 30kW S5 3 Phase Triple MPPT - DC #2: SOL-S5-GC30K-DC Solis 30kw Data Sheet Solis 30kw User Manual Solis 30kw Warranty Solis 30kw G99 Certification *Collections are not permitted due to health & safety regulations* Part No: SOL-S5-GC30K-DC Inverters - Main Units Rating: 30,000W Phases: 3 S5-GC30K - Series 5 Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.5% Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 32A input per MPPT, 16A input for each PV string Maximum AC output power of 33kW 3 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified Weight: 44 kgRated Power: 30,000 WMin PPT Voltage: 200 VMax PPT Voltage: 1,000 VDC Startup Voltage: 200 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 33,000 WSurge AC Power (1 Second): 33,000 WMax DC Current: 96 AMax DC Inputs: 6Has DC Fuses: 0Connector: MC4Included Connectors: 12Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 3Has Integrated DC Switch: YesWarranty: 5 years

KETO Battery Disconnector with 40A Fuses #2: KETO-00-40A Storage Systems - Battery Fuse Holder This part is made up of the following items: 1 x KETO-00 Fuse-switch-disconnector KETO size 00 body (battery isolator) 2 x N5013407-40A NH Fuse-link 40A for KETO-00 Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 00 Maximum DC current = 40A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 DIN rail mountable This part is the Keto-00 disconnector switch with 2 x 40A fuse links.