GivEnergy Gen3 - 5.0kW Hybrid with 9.5kWh Gen 3 Solar Battery Storage #2: GIV-5.0K-G3-9.5-G3-WG   - PV and Storage Package GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart  GivEnergy 5.0 Gen 3 Data Sheet  GivEnergy 5.0 Gen 3 Installation Manual This package includes:   1 x GivEnergy 9.5 kWh Li-Ion Battery Gen 3 (GIV-BAT-9.5-G3) 1 x GivEnergy 1PH Hybrid Inverter 5.0kW Gen 3 with bonding kit (GIV-HY-5.0.-G3-PE) 1 x GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet) 1 x GivEnergy Programmable Single Phase Energy Meter with CT 1 x GivEnergy Grommet for cable 1 x GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters GivEnergy's newly released Gen 9.5kWh battery offers an impressive cost/ kWh.  Featuring a smaller size and higher capacity, it is ideal for medium to large properties and  can be installed in a wider range of locations due to its compact design. The batteries are extremely safe and the battery chemistry does not contain any Cobalt, making it non-flammable. The battery pack is 99% recyclable.   Features Uses latest LiFePO4 prismatic cell technology Retrofit compatibility Remote firmware upgrades Easy install plug and play IP65 Rated  Specs Weight: 85kg Nominal Energy: 9,500 Wh Depth of Discharge: 100% Voltage: 51 V Continuous Rate of Discharge (Normal Use:: 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 seconds) : 7,080 W Maximum Charge Rate (5 mins): 6,144 W Warranty: 12 years Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.  

Fox AC 3.7kW Charger Inverter  #1: FE-AC1-3.7 Storage Systems - Charger-Inverter Fox 3.7kW Data Sheet Fox 3.7kW Inverter User Manual Fox 3.7kw Inverter Warranty Fox 3.7kw Inverter G100 Certificate *Collections are not permitted due to health & safety regulations* The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Compatible with Fox HV2600 & Cube batteries IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% BMS unit required 2 x HV2600 batteries minimum CT Clamp included  

GivEnergy 3PH 20kW Hybrid Inverter#2: GIV-3HY-20.0-HV Storage Systems - Hybrid 3Phase Inverter GivEnergy 3PH 20kW Hybrid Inverter Datasheet GivEnergy 3PH 20kW Hybrid Inverter Installation Manual GivEnergy 3PH 20KW Warranty GivEnergy App Brochure *Collections are not permitted due to health & safety regulations* This GivEnergy Hybrid Inverter, designed for three-phase systems, functions as both a battery and solar inverter within a single unit enabling AC and DC coupling of the battery. This integrated system connects with solar panels for immediate electricity generation, with surplus energy stored in the battery for future use. Features: Plug-and-play installation On/off-grid phase balancing Phases: 3 MPP Tracker: 2 Inputs per Tracker: 1 Rated AC power: 11 kW MPPT Voltage range: 200 - 850 V Warranty: 12 years Battery Compatibility: Battery connection for high-voltage battery (GivEnergy Battery only) Connectivity: WiFi included Meter: 3-PH smart meter not included Specs: Weight: 36 kg Rated Power: 20,000 W Min PPT Voltage: 200 V Max PPT Voltage: 850 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 1,000 V Max DC Power: 30,000 W Max AC Power (5 Minutes): 20,000 W Surge AC Power (1 Second): 20,000 W Max DC Current: 60 A Max DC Inputs: 2 DC Fuses: 0 Connector: MC4  Included Connectors: 0 Euro Efficiency: 97 % Transformer: None MPPT Quantity: 2 Has Integrated DC Switch: No EPS: 20kW Emergency Power Supply Input current: 15 A Short-circuit input current: 20 A

Dyness PowerDepot H5B 5.12kWh LV LFP Battery IP65 Please view our battery storage information page for sizing and selecting the right battery storage system for you. #2: DY-POWERDEPOTH5B Dyness H5B Datasheet Dyness HB5 User Manual  Dyness Warranty To view complete Dyness full range please visit our Dyness main page Battery to inverter cables included. For multiple batteries the battery to inverter cables will need to be wired through a busbar such as the Victron Lynx Distributor The Dyness PowerDepot H5B is a low-voltage battery designed with homeowners in mind.  The reliable lithium iron phosphate (LFP) technology ensures maximum safety and a longer cycle life. It can be used flexibly for self-consumption and backup applications with a wide capacity range scalable from 5.12kWh to 25.6 kWh, to meet various energy storage needs.   Wall bracket included Features Real-time monitoring & Remote upgrade available High Protection Level - Indoor and outdoor options Wall-mounted or floor-standing  High Safety LFP Wide Compatibility Matching with leading inverters IP65 Temperature protection - Healing and Cooling function Specs Weight: 55kg Nominal Energy: 5,120Wh Depth of Discharge: 90% Voltage: 51 V Continuous Discharge Rate: 2,560 W Maximum Discharge Rate (5 Minutes: 2,560 W Maximum Discharge Rate (5 Minutes): 2,560 W Surge Discharge Rate (15 Second): 2,560 W Maximum Charge Rate (5 Minutes): 2,560 W

GivEnergy 1PH Hybrid Inverter 10.0kW HV 3rd Generation #2: GIV-HY-10.0-G3-HV GivEnergy 1PH 10.0kW HV Gen 3 Datasheet GivEnergy 1PH 10.0kW HV Gen 3 Installation Manual GivEnergy Battery Compatibility Chart GivEnergy Product Warranty *Collections are not permitted due to health & safety regulations* GivEnergy's third generation Hybrid Inverter range can be coupled directly with solar panels to generate usable electricity as well as store excess energy for later use. Excess energy is stored in the battery for later use. In addition it minimizes importing of energy by discharging appropriately to meet demand.  Compatible with GivEnergy HV Storage - High Voltage Batteries but not compatible with the LV battery range PLEASE NOTE: an earth bonding kit is required with every Gen 3 inverter. This must be added separately GIV-PE-KIT-G3 Features In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty Specs:  Weight: 32 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 580 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 580 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 3,600 W Surge AC Power (1 Second): 3,600 W Max DC Current: 30 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity: 2 Has Integrated DC Switch: No  Please note:  Givenergy online portal login is required to fully commission this system. If you do not have a login, please contact GivEnergy before going to site to install If fitted by non-trained GivEnergy installer the Warranty will be VOID Givenergy system must be connected to the internet to benefit from full warranty services  

GivEnergy 1PH Hybrid Inverter 8kW HV 3rd Generation #2: GIV-HY-8.0-G3-HV GivEnergy 1PH 8.0kW HV Gen 3 Datasheet GivEnergy 1PH 8.0kW HV Gen 3 Installation Manual GivEnergy Battery Compatibility Chart GivEnergy Product Warranty *Collections are not permitted due to health & safety regulations* GivEnergy's third generation Hybrid Inverter range can be coupled directly with solar panels to generate usable electricity as well as store excess energy for later use. Excess energy is stored in the battery for later use. In addition it minimizes importing of energy by discharging appropriately to meet demand.  Compatible with GivEnergy HV Storage - High Voltage Batteries but not compatible with the LV battery range PLEASE NOTE: an earth bonding kit is required with every Gen 3 inverter. This must be added separately GIV-PE-KIT-G3 Features In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty Specs:  Weight: 32 kg Rated Power: 8,000 W Min PPT Voltage: 90 V Max PPT Voltage: 550 V DC Startup Voltage: 80 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 12,000 W Max DC Current: 50 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity: 2 Has Integrated DC Switch: No  Please note:  Givenergy online portal login is required to fully commission this system. If you do not have a login, please contact GivEnergy before going to site to install If fitted by non-trained GivEnergy installer the Warranty will be VOID Givenergy system must be connected to the internet to benefit from full warranty services  

SolarEdge Branch Connectors for Home Battery 400V 2: IAC-RBAT-RWYCBL-01  #3: 5014   SolarEdge Branch Connectors for Home Battery 400V Part No: IAC-RBAT-RWYCBL-01 Accessories - DC Battery Storage Branch connectors for parallel connection of multiple SolarEdge Energy Bank batteries. 1x pair - 1x male and 1x female

SolarEdge Floor Stand Kit for Home Battery 400V #2: IAC-RBAT-FLRSTD-01  #3: 4051   Floor stand kit for SolarEdge Energy Bank to allow floor mounting of the battery

Fox EQ 4.32kWh HV Battery (Slave) #2: FE-HV-EQS-4300 Fox EQ 4300 Datasheet Fox EQ 4300 Manual Fox EQ4300 Warranty Fox Battery Sizing Guide Fox EQ - High Voltage Battery (Slave) Fox EQ is a high-performance, scalable battery storage system. With this modular design's flexibility, it is suitable for a variety of storage requirements. Additional batteries can be installed in series, allowing for a maximum storage capacity of 30.24kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Features 4.32kWh Capacity Scalable to 30.24kWh 90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage Specs Weight: 37 kg Battery Type: Lithium Ion Nominal Energy: 4,145 Wh Depth of discharge: 90.00 % Voltage: 57 V Continuous Discharge Rate (Normal Use): 2,875 W Maximum Discharge Rate (5 Minutes): 2,875 W Surge Discharge Rate (15 Seconds): 3,737 W Maximum Charge Rate (5 Minutes): 2,875 W Remember: In order to activate the extended warranty to 12 years, please register your install with Fox online, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   *Cube batteries from ITS are V2. If purchasing to add to an existing system, please check if you have V2 with B connector batteries on your existing system.   This product must be installed by a qualified electrician. 

GivEnergy Commercial SME AIO - High Voltage Box   #2: GIV-3U-HVB-ID Switches - DC Combiner Box   GivEnergy Commercial Product Brochure GivEnergy Commerical AIO Warranty GivEnergy Commercial SME AIO - High Voltage Box Weight: 100kg      

GivEnergy Commercial SME AIO 120A CT #2:  GIV-COM-CT-120 Display - Current Sensor Clamps  GivEnergy Commercial Product Brochure GivEnergy Commerical AIO Warranty Specs  Primary Rating: 12A Secondary Rating: 0.4A  Hole Dimensions: 36.1mm (outer width) / 15.7mm (inner width) Internal Height: 16.3mm   Overall Dimensions: 46.8mm x 32.3mm  (H x D) CT Clamp Information    Most CT clamps will be supplied as split core to enable easier fitment. CT clamps must be rated to the maximum current of the cable they are monitoring. In most cases this is the rating (A) of the protective device. For best accuracy, CT clamps should be sized as close as possible to the rated supply and fit the cable/bus bar as tightly as possible. Many other size options are available on request.    

Fox EQ HV EQ4800-L2, 9.32kWh 1x Master 1x Slave #2: FE-HV-EQ-2-4.8-9.6 Storage Systems - Li-ion Battery Pack Fox's  EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Fox EQ 4.66kWh - Stack of 2 (9.32kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 1 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 83,5 kg Rated Power: 4,800 W Battery Type: Lithium Ion Nominal Energy: 9,320 Wh Depth of discharge: 90.00 % Voltage: 89 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 386 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L3, 13.98kWh 1x Master 1x Slave #2: FE-HV-EQ-3-4.8-14.4 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Fox EQ 4.66kWh - Stack of 3 (13.98kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 2 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 125,5 kg Battery Type: Lithium Ion Nominal Energy: 13,980 Wh Depth of discharge: 90.00 % Voltage: 134 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 524 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L4, 18.64kWh 1x Master 3x Slave #2:  FE-HV-EQ-4-4.8-19.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Fox EQ 4.66kWh - Stack of 4 (18.64kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 3 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 166,5 kg Battery Type: Lithium Ion Nominal Energy: 18,640 Wh Depth of discharge: 90.00 % Voltage: 179 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 622 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L5, 23.3kWh 1x Master 4x Slave #2:  FE-HV-EQ-5-4.8-24.0  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Fox EQ 4.66kWh - Stack of 5 (23.3kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 4 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 208 kg Battery Type: Lithium Ion Nominal Energy: 23,300 Wh Depth of discharge: 90.00 % Voltage: 224 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 800 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L6, 27.96kWh 1x Master 5x Slave #2:  FE-HV-EQ-6-4.8-28.8 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Fox EQ 4.66kWh - Stack of 6 (27.96kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 5 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 249.5 kg Battery Type: Lithium Ion Nominal Energy: 27,960 Wh Depth of discharge: 90.00 % Voltage: 268 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 938 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.