Solax Inverters

SOLAX CTSA016 100A CT Clamp #2: CTSA016 CT Clamp for X1-AC   CTSA016 100A CT Clamp Installation Manual

SolaX X1 Fit AC Coupled Battery charger Inverter HV 5.0kW #2: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter #3: 4614 Sola X1 RetroFit Inverter Data Sheet Solax X1 RetroFit Inverter User Manual Solax X1 RetroFit Inverter Warranty Solax X1 RetroFit G99 Certification Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX X1 RetroFit AC Charger – Upgrade Your PV System Upgrade your existing solar PV system effortlessly with the SolaX X1 RetroFit AC Coupled Inverter Charger. Designed for single-phase inverters of any brand, this retrofit solution delivers high efficiency, flexibility, and reliable performance. Ideal for residential or commercial installations. Key Features High Efficiency – Up to 97% maximum efficiency for optimal energy usage Flexible Battery Support – Supports high-voltage batteries for reduced cable thickness Wide Compatibility – Works with any single-phase inverter brand Remote Monitoring – Monitor performance via SolaX XCloud Quiet & Low Maintenance – Natural cooling design for silent operation Technical Benefits Max Charge/Discharge – 6 kW Installation – Indoor or outdoor rated Smart Grid Ready – Supports grid trading with <0.5s response time Flexible Charging – Grid charging possible Connectivity – WiFi or LAN stick available separately Battery Requirements Minimum of 1 Solax battery per X1 AC inverter Maximum of 3 batteries, all must be same capacity (cannot mix 4.5kWh and 6.3kWh batteries) Compliance UK tested and certified under G98/G99 standards Requires latest firmware and hardware version for compliance The SolaX X1 RetroFit AC Charger is the perfect solution to extend the life and capabilities of your PV system while providing smart, high-efficiency energy management.

SolaX X1 3.7kW G4 Hybrid single phase battery storage Inverter HV   #2: X1-HYBRID-G4-3.7#3: 4336 Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX G4 HV Single Phase Hybrid Inverter & Charge Controller – Reliable, High-Performance Energy Management The SolaX G4 HV Single Phase Hybrid Inverter and Charge Controller range represents the fourth generation of SolaX hybrid inverters. Building on the proven features of the previous G3 range, the G4 introduces advanced enhancements that maximise efficiency, reliability, and ease of installation for residential and commercial solar PV systems. Key Features Supports Up to 150% PV Oversizing – Connect more solar panels than ever before to ensure your system consistently produces the maximum energy possible. High Reliability in Harsh Environments – Tested to withstand extreme conditions including: High and low temperature extremes HALT (Highly Accelerated Life Test) Salt spray exposure Full-load aging tests Rapid Installation – Designed for fast setup, reducing on-site installation time to approximately 30 minutes. Fast Charging Speeds – Capable of nearly fully charging a triple-power battery in just one hour, allowing for greater energy storage in less time. Element Protection & Extreme Cold Operation – Operates at full load even in temperatures as low as -30°C, ensuring uninterrupted performance in all climates. Why Choose the G4 Range The SolaX G4 HV hybrid inverters combine cutting-edge technology with practical enhancements to provide: Increased PV system efficiency Reliable performance in demanding environments Simplified installation and maintenance Rapid energy storage and discharge for flexible energy management Applications Ideal for UK homeowners and installers looking for: Single-phase hybrid inverter solutions High-capacity battery integration Long-lasting, weather-resistant solar PV systems

SolaX X1 3kW G4-V2 Hybrid inverter with WiFi #2: X1-HYBRID-G4-3.0-V2#3: 4329 SolaX X1 G4 Hybrid 3.0D (inc. WiFi dongle) £995 +VAT For a full list of SolaX products click here. SolaX 3kW Data Sheet SolaX 3kW Installation Manual SolaX 3kW Warranty SolaX 3kW G98 Certificate   SolaX G4 Hybrid/AC Charger Inverter – 3.0kW (4th Generation) The SolaX G4 Hybrid/AC Charger Inverter is the fourth generation of SolaX’s highly successful inverter range, building on the proven reliability of the G3 series while introducing new performance enhancements. Designed for both residential and light commercial use, it delivers efficient solar power management with rapid charging and robust durability. Key Features of the G4 Series Supports up to 150% PV Oversizing – maximise solar array capacity for greater energy harvest Fast Charging Speeds – can almost fully charge a Triple Power battery in just one hour High Reliability – passed HALT testing, extreme temperature cycles, salt spray, and full-load ageing tests Quick Installation – 30-minute install reduces time on-site Element Protection – operates at full load in harsh conditions, down to -30°C Proven Durability – engineered for long-lasting performance in demanding environments Technical Specifications Weight: 24 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 min): 3,300 W Surge AC Power (1 sec): 3,900 W Max DC Current: 28 A DC Inputs: 2 MPPT Quantity: 2 Connector Type: SUNCLIX (2 included) Efficiency (Euro): 97% Transformer: None Integrated DC Switch: No Warranty: 10 Years Why Choose the SolaX G4 Hybrid/AC Charger? The SolaX G4 series is designed for homeowners and installers who need high efficiency, rapid charging, and maximum reliability in a compact solution. With support for PV oversizing, extreme temperature operation, and cutting-edge battery integration, it offers a future-proof solar inverter system that is easy to install and simple to manage.

SolaX 5kW G4-V2 Hybrid Inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. SolaX X1-Hybrid G4 Single Phase Hybrid Inverter & Charge Controller Overview The SolaX X1-Hybrid G4 is a fourth-generation single-phase hybrid inverter and AC charge controller, designed to deliver high-efficiency energy conversion and fast battery charging for residential PV systems. This model builds on the success of the previous generation while adding enhanced features for reliability, oversizing, and speed. Key Features Supports up to 150% PV oversizing for maximum energy production High reliability: HALT-tested, extreme temperature (-30°C to +60°C), salt spray tested, full load aging tested Fast installation: Quick setup in approximately 30 minutes Rapid charging: Can nearly fully charge a Triple Power battery in just one hour Element protection: Operates efficiently in extremely cold conditions down to -30°C Wi-Fi included: Remote monitoring and control without additional equipment Specifications Weight: 24 kg Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 DC Fuses: None Connector Type: SUNCLIX Included Connectors: 2 Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years This inverter is ideal for residential PV systems seeking fast charging, reliable operation in harsh environments, and maximized solar self-consumption.

SolaX X1 G4 Hybrid Inverter 6kW #1: X1-Hybrid-6.0-D #3: 4442 Solax X1 G4 Data Sheet Solax X1 G4 User Manual Solax X1 G4 Warranty Solax X1 G4 G99   SolaX X1 G4 Hybrid 6.0D – 4th Generation Hybrid Solar Inverter The SolaX X1 G4 Hybrid 6.0D represents the latest 4th generation of SolaX hybrid inverters, offering improved performance, enhanced reliability, and flexible energy storage options. Perfect for UK households and small commercial properties, this hybrid inverter allows you to store surplus solar energy in batteries for later use while retaining all the core features of previous generations. Key Features Intelligent Hybrid Functionality Stores excess solar energy in batteries for on-demand use. Functions as both an inverter and battery storage controller – ideal for retrofits or new installations. Supports up to 150% PV oversizing, ensuring maximum energy harvest. Built-in Safety & Reliability EPS (Emergency Power Supply) changeover switch included for backup during outages. Operates at full capacity in extreme temperatures down to -35°C. IP65-rated for outdoor installations, protecting against dust and water ingress. High Performance & Efficiency 30A charge/discharge capability for fast battery management. On-grid and off-grid operation for flexible system design. Max efficiency of 97.6%, ensuring optimal energy conversion. Connectivity & Monitoring Includes WiFi dongle for real-time system monitoring and remote management. Technical Specifications AC Attributes Max Power: 6,000 W Max Current: 28.6 A Number of Phases: 1 DC Attributes Max Power: 9,000 W Max Isc Current: 16 A Max Voltage: 600 V Start-up Voltage: 90 V System & Physical Max Efficiency: 97.6% IP Rating: IP65 Weight: 22 kg Dimensions: 482 × 417 × 181 mm

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 8kW #2: X3-FIT-8#3: 4748 Solax X3 8kW Inverter Data Sheet Solax X3 8kW Inverter User Manual Solax X3 8kW Inverter Warranty Solax X3 Inverter G99 Certification SolaX X3-FIT Series 3-Phase AC Coupled Hybrid Inverter Product Overview The SolaX X3-FIT Series is a fourth-generation, 3-phase AC coupled hybrid inverter designed for maximum solar energy utilisation. This retro-fit inverter directs excess solar energy into your battery for later use and can act as a backup power supply during grid outages, sending stored energy back to your home. Key Features Virtual Power Plant (VPP) Function Supports VPP integration for smart energy management Emergency Power Supply (EPS) Switchover time <10ms Provides up to 150% output for 60 seconds during power loss Flexible Energy Management Max. 110% nominal apparent AC power Flexible peak shaving for optimised energy use Optional three-phase unbalanced output Connectivity Compatible with WiFi V2.0 for SolaX Cloud monitoring WiFi stick required for remote monitoring Installation Notes For G100 applications, a software update is recommended Recommended use with SolaX CHINT three-phase CT energy meter Collections are not permitted due to health & safety regulations Technical Specifications AC Attributes Max power: 8,800 W Max current: 12.9 A Number of phases: 3 System Max efficiency: 98% IP rating: IP65 Dimensions & Weight Dimensions (H x W x D): 503 x 503 x 199 mm Weight: 30 kg

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 10kW #2: X3-FIT-10#3: 4749 Solax X3 Inverter Data Sheet Solax X3 Inverter User Manual Solax X3 Inverter Warranty Solax X3 Inverter G99 Certification Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.   Three-Phase Retro Fit 10.0kW AC Coupled Inverter Product Features Compatible with high-voltage batteries IP65 protection rating Natural cooling for low maintenance Maximum efficiency up to 96% EPS Functionality This is the W version of the inverter with a built-in EPS function. An external backup box is required to fully utilise the EPS capability. Battery Compatibility Supports 2 to 4 Solax Triple Power Batteries (all batteries must be the same size per system). Scalability This inverter can be paralleled up to 5 units per site, offering flexible expansion for larger installations.

SolaX X3 G4 Hybrid Inverter12.0D #3: 4575 SolaX X3 Hybrid Data Sheet SolaX X3 Hybrid Warranty SolaX X3 Hybrid G100 Certificate For a full list of SolaX products click here.   SolaX X-Hybrid 4th Generation – Three-Phase Hybrid Inverter Overview The SolaX X-Hybrid 4th Generation builds on the proven features of the previous generation, offering enhanced performance and improved functionality. This hybrid solar PV inverter and battery storage controller allows for efficient conversion of solar energy while storing surplus energy in batteries for later use. When retrofitting, it replaces your existing inverter and must be sized like a standard inverter. AC Attributes Maximum Power: 12,000 W Maximum Current: 19.3 A Number of Phases: 3 DC Attributes Maximum Power: 18,000 W Maximum Short-Circuit Current (Isc): 20 A Maximum Voltage: 1,000 V Start-Up Voltage: 200 V Key Benefits Hybrid functionality for simultaneous solar generation and battery storage Compatible for retrofit or new installations Efficient energy management across AC and DC inputs Suitable for medium to large-scale residential or commercial installations This inverter is ideal for homeowners or businesses looking for flexible hybrid energy solutions with high efficiency and scalable battery integration.