Sunsynk Solar Power Kits

Sunsynk ECCO 3.6kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1:SUN-3.6-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 80A Victron Lynx for 2+ batteries Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk Warranty Sunsynk 3.6Kw G99 Certificate GSL 10.24kWh Powerwall datasheet Sunsynk 3.6kW AC ECCO 7kWp Hybrid Inverter + GSL 10.24kWh Powerwall Battery Maximise your solar energy potential with this next-generation hybrid inverter and high-capacity battery storage solution. Perfect for residential or commercial setups, the Sunsynk system offers intelligent energy management, seamless integration with solar PV, and flexible battery storage for uninterrupted power. Sunsynk 3.6kW AC ECCO Hybrid Inverter Features: Rated Power: 3,600 W AC output (5-minute max: 3,960 W; surge: 5,400 W) Dual MPPT Design: 7,000 W maximum DC input Battery Compatibility: Supports Lithium-ion and Lead Acid batteries up to 50kWh Smart Energy Management: API integration with Octopus Agile & Flux for dynamic energy pricing and SEG export Programmable Power Export: Automatically switches between Grid-Tied and Off-Grid modes Parallelable: Up to 16 units on the same firmware Protection & Durability: IP65 rated, anti-islanding protection, integrated DC switch High Efficiency: 99.9% Euro efficiency Warranty: 5 years standard GSL 10.24kWh Powerwall Battery Features: Integrated Functions: Combines inverter, solar charger, and battery for uninterruptible power support Battery Type: LiFePO4 (LFP) for stable, safe, and long-lasting energy storage Capacity: 10.24kWh per battery, 200Ah, supports up to 16 units in parallel Charging: Max 100A, continuous 120A Installation: Plug-and-play, modular design, portable for easy handling Space Efficient: Footprint only 0.15 m², suitable for wall or floor mounting Protection: Overload, over-temperature, short-circuit, and triple protection at module, pack, and system level Certifications: CE, ROHS, VDE, MSDS, UN38.3, IEC approved Dimensions: 621 × 214 × 550 mm Weight: 93 kg Key Benefits: Complete Control: Use the Sunsynk App for real-time monitoring, push notifications, and remote configuration. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Cost Optimisation: Schedule charging and discharging based on Octopus Agile & Flux tariffs for maximum savings Flexible & Scalable: Expandable battery packs for growing energy needs Reliable & Safe: LFP technology, robust protection, and IP65-rated components for long-term performance This Sunsynk Hybrid + GSL Powerwall bundle is ideal for homeowners and businesses looking for a fully integrated, efficient, and intelligent solar energy storage system. Take control of your energy, reduce bills, and stay powered during outages.

Sunsynk battery storage 5Kw On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-5KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs 2m Red & Black 35mm2 battery Cable Keto 120A Victron Lynx for 2+ batteries   Sunsynk 5kWw Data Sheet Sunsynk 5kW Installation Manual Sunsynk 5kW Warranty Sunsynk 5kW G99 Certificate GSL 10.24kWh Powerwall datasheet Sunsynk 5kW ECCO Hybrid Inverter with GSL 10.24kWh Powerwall Battery The Sunsynk 5kW ECCO Hybrid Inverter paired with the GSL 10.24kWh Powerwall battery provides a complete, high-performance energy management solution. Ideal for residential and small commercial solar installations, this system manages power flow from solar, grid, and generators, offering flexible energy storage, backup capability, and smart monitoring. Key Features – Sunsynk 5kW ECCO Hybrid Inverter Advanced Energy Management Dual MPPT design for optimal solar energy harvest. Compatible with most Lithium-ion and Lead Acid batteries. Zero export function with support for multiple load management. Flexible System Expansion Up to 16 units with the same firmware can be paralleled. Essential and non-essential load outputs for smart energy prioritisation. Smart Monitoring & Remote Control Wi-Fi logger included for remote access via the Sunsynk App. Real-time push notifications for power cuts, generator usage, or battery status. Complete control of settings, updates, and inverter monitoring from anywhere. Durable & Reliable IP65-rated for indoor and outdoor installation. Automatic switching between grid-tied and off-grid modes. CE/ROHS/VDE/MSDS/UN38.3/IEC certified for international compliance. Seamless Integration Integrated with Octopus Agile, Flux & Go for energy optimisation and SEG payments. Charge batteries during low-cost periods and discharge when electricity prices are high. Key Features – GSL 10.24kWh Powerwall Battery Versatile Energy Storage Combines inverter, solar charger, and battery functions for uninterrupted power. Supports wall or floor mounting. Battery-to-battery and battery-to-inverter cables included. Smart & Configurable LCD display for voltage, battery charge current, and AC/solar charge prioritisation. Compatible with mains voltage or generator power with auto-restart. Flexible battery capacity options: standard or external batteries. High Performance & Safety MPPT controller converts solar energy directly to loads. Overload, over-temperature, and short-circuit protection. CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Supports up to 16 batteries in parallel for scalable energy storage. Compact & Easy Installation Modular design allows single-person handling and installation. Plug-and-play, 30-minute setup. Space-saving footprint of 0.15 sqm per battery. Technical Specifications Sunsynk 5kW ECCO Hybrid Inverter Rated Power: 5,000 W Max DC Power: 6,500 W Max AC Power (5 min): 5,500 W Surge AC Power (1 sec): 11,000 W Max DC Current: 22 A DC Voltage: 125–425 V MPPT Quantity: 2 Integrated DC Switch: Yes GSL 10.24kWh Powerwall Battery Dimensions: 621 x 214 x 550 mm Net Weight: 93 kg Battery Capacity: 200 Ah Max Charging Current: 100 A Max Continuous Charging Current: 120 A Why Choose the Sunsynk ECCO & GSL Powerwall System? This integrated system provides homeowners with a smart, efficient, and flexible energy solution. With high-efficiency hybrid inverter technology, scalable LiFePO4 battery storage, real-time monitoring, and compatibility with Octopus Agile & Flux, you can optimise energy usage, save on electricity costs, and ensure uninterrupted power for your home. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.

Sunsynk battery storage 8kW On & Off grid Hybrid solar & wind Inverter with 1-4 x GSL Powerwall 10.24kWh battery kit #1: SUN-8KW-ECCO-GSL-POWERWALL10.24 Storage Systems - Hybrid Inverter Accessories included: Comms cable - GSL-SUNSYNK-CANBUS-CABLE 35mm lugs - LUG35-8 2m Red & Black 35mm2 battery Cable Keto 160A - KETO-00  & 2 x N5014907-160A  Victron Lynx for 2+ batteries   Sunsynk 8kW Data Sheet Sunsynk 8Kw Installation Manual Sunsynk 8kW Warranty Sunsynk 8kW G99 Certificate Sunsynk 8kW Hybrid Inverter + GSL 10.24kWh Powerwall Battery Take complete control of your home energy with the Sunsynk 8kW ECCO Hybrid Inverter paired with the GSL 10.24kWh Powerwall Battery. This powerful combination lets you generate, store, and optimise solar energy while integrating seamlessly with the grid. Perfect for households looking to lower bills, improve efficiency, and gain energy independence. ⚡ Sunsynk 8kW Hybrid Inverter (ECCO) The Sunsynk 8kW Hybrid Inverter is designed to intelligently manage power from solar panels, the national grid, and generators. With advanced features and seamless connectivity, it’s ideal for flexible, reliable home energy systems. Key Features: Dual MPPT Design – maximises solar harvest. Octopus Agile & Flux Integration – buy electricity at cheap rates, sell back at peak times. Seamless Switching – automatic grid-tied to off-grid changeover. Scalable System – parallel up to 16 inverters with same firmware. App Monitoring – control settings and view live data via Sunsynk & SolarMan apps. Zero Export Function – prevents feed-back to grid where not permitted. IP65 Rated – durable, weather-resistant for indoor/outdoor installation. Specs: Rated Power: 8,000 W Max DC Power: 10,400 W Max Input Voltage: 500 V Max DC Current: 44 A MPPTs: 2 Surge AC Power: 8,002 W (1 sec) Euro Efficiency: 96.5% Weight: 25 kg Warranty: 5 Years 🔋 GSL 10.24kWh Powerwall Battery The GSL 10.24kWh Powerwall Battery is a reliable, modular storage solution compatible with Sunsynk, Victron, and Voltronic hybrid inverters. Built with LiFePO4 (LFP) chemistry, it provides safe, long-lasting performance for residential energy storage. Key Features: 10.24kWh Storage Capacity – scalable, supports up to 16 batteries in parallel. Safe & Stable LiFePO4 Cells – triple-layer protection (module, pack, system). Plug & Play Design – quick 30-minute installation, wall or floor mounted. Smart LCD Display – configure input voltages, charging currents, and priorities. Resilient Performance – overload, over-temperature & short circuit protection. Certified Quality – CE/ROHS/VDE/MSDS/UN38.3/IEC approved. Specs: Capacity: 200Ah (10.24kWh) Max Charging Current: 100A Max Continuous Charging: 120A Dimensions: 621 × 214 × 550 mm Net Weight: 93 kg Footprint: 0.15 sqm Warranty: 10 Years (typical for GSL batteries) 📲 Smart Monitoring & Control With the Sunsynk App, enjoy full system visibility and control: Real-time monitoring of solar, battery & grid usage. Push notifications for power cuts or generator use. Change all inverter settings remotely. Custom reports & energy usage graphs. Integration with Octopus Agile, Flux & Go tariffs for smart charging & discharging. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. 🌍 Why Choose This Bundle? Reduce electricity bills with smart energy storage. Optimise solar self-consumption. Take advantage of cheap energy tariffs and earn via SEG payments. Gain energy independence with backup power during outages. Scalable and future-proof for growing energy needs. 👉 The Sunsynk 8kW Hybrid Inverter + GSL 10.24kWh Powerwall Battery bundle is the perfect solution for homeowners seeking efficient, smart, and flexible solar energy storage.

Sunsynk Lifelynk X 3.6kW all in one Hybrid Inverter with 3.84kWh battery  5: SUN-LIFE3.6X-HYB Storage Systems - Hybrid Inverter #2: LIFE-3.6-HYB02 Sunsynk Lifelynk Data Sheet Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter – Compact, Powerful, and Smart The Sunsynk Lifelynk X 3.6kW Hybrid Inverter is an all-in-one, plug-and-play energy solution, designed to simplify installation while offering full control and visibility over your solar storage system. Perfect for retrofitting into existing solar PV systems or powering new installations, this inverter integrates a 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery, and 4.5kW MPPT into a compact and powerful unit. Key Features Small and Mighty: Ideal for smaller properties, social housing, and local government projects. Built-In Power: 3.6kW hybrid inverter, 3.84kWh battery, and 4.5kW MPPT in a single compact unit. EPS Function: Supports 3.6kW output for essential loads during a power cut. Easy Installation: Wall-mountable bracket and pre-configured ports for Load, Grid, CT, and WiFi data logger. Plug & Play: Quickly get your system running without complex setup. Smart Energy Management: Compatible with Octopus Agile & Flux, enabling you to buy electricity at cheap rates and sell back via SEG payments. Expandable Battery Capacity: Increase battery storage in the future if needed. EV Charger Compatible: Supports installation alongside an electric vehicle charger. Technical Specifications Rated Power: 3,600 W Battery Capacity: 3.84 kWh LiFePO4 Max Charging Current: 60A Max Discharge Current: 80A DC Start-up Voltage: 150 V Dimensions: 700.6 x 534.6 x 182.2 mm Weight: 57.4 kg Warranty: 5 Years App & Remote Control Features Complete Control via Sunsynk App: Monitor, configure, and control your hybrid inverter from anywhere. Real-Time Push Notifications: Instant alerts for power cuts, battery status, or generator operation. Remote Configuration: Change settings, priorities, and charging/discharging schedules from any location. Live Monitoring & Reporting: Access detailed energy usage statistics and generate custom reports to optimise savings. Integration with Octopus Agile, Flux & Go: Charge at the cheapest rates and discharge when electricity prices are high. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Why Choose Sunsynk Lifelynk X? Compact, space-saving design with all-in-one functionality. Ideal for residential solar retrofits or new solar PV installations. Expandable and future-proof for growing energy needs. Supports emergency backup power and essential load management. Seamless integration with smart tariffs for maximum savings. Upgrade your home energy system with the Sunsynk Lifelynk X 3.6kW Hybrid Inverter – powerful, compact, and fully controllable from your smartphone.

Complete Kit: Sunsynk CATL 5.12kWh + Sunsynk 3.6kW Hybrid Inverter Complete kit includes: 1 x SUN-BAT-CATL-5.121 x SUN-3.6-ECCO 1 x SUN-CABLE-PACK 1 x KETO-00-100A Sunsynk 3.6Kw Inverter Data Sheet Sunsynk 3.6Kw Inverter Installation Manual Sunsynk 3.6Kw Inverter Warranty Sunsynk 3.6Kw Inverter G99 Certificate Sunsynk 5.12kWh Battery Data Sheet Sunsynk 5.12kWh Battery Manual Sunsynk 5.12kWh Battery Warranty To view our full range of Sunsynk products visit our main Sunsynk page here To increase the size of your system add: Sunsynk CATL 5.12kWh battery Sunsynk CATL battery to battery cable for each additional battery GivEnergy Gen 9.5kWh LiFePO4 Battery – Compact, High-Capacity Energy Storage The GivEnergy Gen 9.5kWh Battery offers a perfect balance of power, safety, and flexibility for medium to large properties. Using the latest LiFePO4 prismatic cell technology, this battery delivers high capacity in a compact form, making it easy to install in a wider range of locations. Key Features: High Safety: Non-flammable LiFePO4 chemistry, cobalt-free, and 99% recyclable Compact & Lightweight: Ideal for retrofit or new installations in limited spaces Plug & Play Installation: Quick and easy setup Remote Firmware Upgrades: Stay up-to-date without physical access Durable & Weather Resistant: IP65 rated for reliable indoor or outdoor use Flexible Energy Use: 100% Depth of Discharge maximizes usable capacity Technical Specifications: Nominal Energy: 9.5 kWh Weight: 85 kg Voltage: 51 V Continuous Discharge Rate (Normal Use): 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 secs): 7,080 W Maximum Charge Rate (5 mins): 6,144 W Depth of Discharge: 100% Warranty: 12 years IP Rating: IP65 The GivEnergy Gen 9.5kWh Battery is ideal for homeowners seeking high-capacity, safe, and reliable energy storage, whether for daily self-consumption, solar backup, or scalable multi-battery systems. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.

Complete home battery storage Kit: Sunsynk CATL 5.12kWh + Sunsynk 3.6kW Hybrid Inverter Complete kit includes: 1 x SUN-BAT-CATL-5.121 x SUN-5.0-ECCO1 x SUN-CABLE-PACK 1 x KETO-00-125A Sunsynk 5w Data Sheet Sunsynk 5Kw Installation Manual Sunsynk 5Kw Warranty Sunsynk 5Kw G99 Certificate Sunsynk 5.12kWh Battery Data Sheet Sunsynk 5.12kWh Battery Manual Sunsynk 5.12kWh Battery Warranty To view our full range of Sunsynk products visit our main Sunsynk page here To increase the size of your system add: Sunsynk CATL 5.12kWh battery Sunsynk CATL battery to battery cable for each additional battery Sunsynk 5kW ECCO Hybrid Inverter + 5.12kWh Lithium-Ion Battery Take control of your energy with the Sunsynk 5kW ECCO Hybrid Inverter and high-performance 5.12kWh lithium-ion battery. Perfect for residential and small commercial installations, this compact hybrid system seamlessly manages solar, grid, and generator power while maximising savings through intelligent energy usage. Key Features Hybrid Inverter (5kW ECCO) Dual MPPT design for maximum solar harvesting Compatible with most Lithium-ion and Lead Acid batteries IP65 rated for indoor/outdoor installation Automatic switching between Grid-Tied and Off-Grid modes Zero export function for smart energy management Parallel up to 16 units for scalable systems Dedicated outputs for Essential & Non-Essential Loads Comes with Wi-Fi logger and CT for remote monitoring Compatible with SolarMan App for real-time management Battery (5.12kWh Lithium-Ion) Long lifespan with 10-year performance warranty 5-year product warranty 100% Depth of Discharge (DoD) Max discharge power 5.12kW (C1 rated) Thermal stability with self-monitoring function IP40 rated, lightweight at 47.5 kg Performance Specifications Battery Nominal Energy: 5,120 Wh Voltage: 48 V Continuous Discharge Rate: 2,400 W Maximum Discharge Rate (5 mins): 4,800 W Surge Discharge Rate (15s): 9,600 W Max Charge Rate (5 mins): 4,800 W Inverter Rated Power: 5,000 W DC Startup Voltage: 150 V Max DC Power: 6,500 W Max AC Power (5 mins): 5,500 W Surge AC Power (1 sec): 11,000 W Max DC Current: 22 A Max DC Inputs: 2 Euro Efficiency: 96.5% Transformerless design with integrated DC switch Intelligent App Control Take full control of your energy system with the Sunsynk App: .Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real-Time Monitoring: Track performance, energy usage, and system status instantly Push Notifications: Get alerts for power cuts, generator usage, or battery activity Remote Settings Adjustment: Edit system settings from anywhere in the world Custom Reports & Analytics: Generate reports to optimise energy usage and savings Integration with Octopus Agile, Flux & Go: Charge batteries at low rates, discharge at high rates, and maximise profits with Smart Export Guarantee (SEG) payments Why Choose Sunsynk? The Sunsynk 5kW ECCO Hybrid System combines efficiency, reliability, and intelligence in a compact package. Its dual MPPT design, scalable battery options, and smart app integration make it ideal for homeowners seeking lower electricity bills, energy independence, and seamless solar integration.

Complete Kit: Sunsynk CATL 5.12kWh + Sunsynk 8kW Hybrid Inverter Complete kit includes: 1 x SUN-BAT-CATL-5.121 x SUN-8.0-ECCO1 x SUN-CABLE-PACK 1 x KETO-1-200  Sunsynk 8kWh Data Sheet  Sunsynk 8kWh Installation Manual  Sunsynk 8kWh Warranty  Sunsynk 8KWh G99 Certificate  Sunsynk 5.12kWh Battery Data Sheet  Sunsynk 5.12kWh Battery Manual  Sunsynk 5.12kWh  Battery Warranty To increase the size of your system add: Sunsynk CATL 5.12kWh battery Sunsynk CATL battery to battery cable for each additional battery Sunsynk 5.12kWh Lithium Battery – Reliable and Scalable Storage The Sunsynk 5.12kWh Lithium-Ion Battery is designed for long-lasting energy storage with outstanding performance. Offering 10 years of expected lifespan and robust warranty protection, it is the perfect choice for both residential and commercial solar systems. Key Features Long life span with 10 years of expected performance 5-year product warranty and 10-year performance warranty Parallel capability of up to 16 units Supports up to 5 batteries per inverter 100% depth of discharge (C1 rated) Self-monitoring function for abnormality detection Excellent thermal stability and safe storage IP40 rating for durability Technical Specifications Battery Type: Lithium-Ion Nominal Energy: 5.12 kWh Voltage: 48 V Depth of Discharge: 100% Weight: 47.5 kg Continuous Discharge Rate: 2,400 W Maximum Discharge (5 mins): 4,800 W Surge Discharge (15s): 9,600 W Maximum Charge Rate (5 mins): 4,800 W Sunsynk 8kW ECCO Hybrid Inverter – Smart, Flexible, and Powerful The Sunsynk 8.8kW ECCO Hybrid Inverter delivers powerful performance with smart monitoring, flexible load management, and full compatibility with modern lithium-ion and lead-acid batteries. Designed for residential and light commercial installations, it ensures seamless energy management whether on-grid or off-grid. Key Features Dual MPPT design for optimised solar input Works with Lithium-ion and Lead Acid batteries Automatic switching between grid-tied and off-grid modes Zero export function for compliance with local regulations Supports up to 16 paralleled units with the same firmware Essential and non-essential load outputs Supplied with Wi-Fi logger and CT clamp IP65 rating for outdoor installations Compatible with SolarMan App for real-time monitoring Technical Specifications Model: Sunsynk-8.8-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 8,000 W Max PV Power: 10,400 W Max Input Voltage: 500 V MPPT Trackers: 2 Efficiency (Euro): 96.5% Surge Power (1s): 8,002 W Integrated DC Switch: Yes Connectors: MC4 Sunsynk App – Complete Remote Control and Monitoring Take full control of your Sunsynk system with the Sunsynk Logger App, available on iOS, Android, and web browsers. From real-time monitoring to tariff optimisation, the app gives you unmatched control over your hybrid inverter and battery system. App Features Real-time monitoring with live system updates Instant notifications for power cuts, generator use, or battery status Remote system control – change settings anytime, anywhere Firmware updates directly via the app Detailed energy stats & reports – track and optimise usage Integrated with Octopus Agile, Flux & Go tariffs for maximum savings Custom charge/discharge scheduling to use energy at the cheapest rates ⚡ Smart energy meets smart savings: Sunsynk’s app integration with Octopus tariffs helps you cut energy bills while maximising solar usage.