Products

SolarEdge Home Backup Interface - Home Hub Inverter (Three Phase RWB) #1: SE-SBI-3PH Storage Systems - Accessory SolarEdge Backup Interface Datasheet SolarEdge Backup Interface Quick Installation Guide *Collections are not permitted due to health & safety regulations* SolarEdge Battery Backup Interface Automatically provides backup power to home loads in the event of grid interruption. Full flexibility in which loads to backup - the entire home or selected loads. Scalable solution to support higher power & higher capacity. Seamless integration with the SolarEdge Home Hub Inverter to manage and monitor both PV generation and energy storage. Accessory for the three-phase Home Hub 'RWB' range of SolarEdge Inverters.

SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module #3: SE-BATTERY-4.6KWH-02 Storage Systems - Li-ion Battery Pack SolarEdge 4.6kWh Datasheet SolarEdge 4.6kWh Manual SolarEdge 4.6kWh Warranty SolarEdge Home Battery Overview The SolarEdge BAT-05K48M0B-02 is a DC-coupled battery designed for three-phase inverter connections. It delivers superior system efficiency, storing and supplying energy for on-grid and backup power applications. This scalable solution allows multiple battery modules to be stacked per inverter for increased capacity, up to 23 kWh, providing flexibility as your energy needs grow. Seamlessly integrated with the complete SolarEdge Home ecosystem, this battery ensures a single source for warranty, support, training, and streamlined operations. Monitor and manage solar production, storage, EV charging, and smart devices using a single app for optimised energy usage. Installation is simple with plug-and-play setup and automatic configuration via the SetApp. Enhanced safety features protect the battery for long-term reliability. Key Features Scalable battery modules up to 23 kWh Seamless integration with SolarEdge Home ecosystem Single app for monitoring and management of solar, storage, EV charging, and smart devices Enhanced safety features for battery protection Simple plug-and-play installation with automatic configuration Specifications Weight: 54.7 kg Battery Type: Lithium-ion Nominal Energy: 4,600 Wh Depth of Discharge: 90% Voltage: 48 V Continuous Discharge Rate (Normal Use): 4,096 W Maximum Discharge Rate (5 Minutes): 4,096 W Surge Discharge Rate (15 Seconds): 4,096 W Maximum Charge Rate (5 Minutes): 2,825 W

SolarEdge Home Battery Home Battery 48V V2 - 3PH Low Voltage 5x 4.6kWh module = 23kWh #2: SE-BATTERY-4.6kWH-02-5-23 SolarEdge 4.6kWh Datasheet SolarEdge 4.6kWh Manual SolarEdge 4.6kWh Warranty This product contains 5 x SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module BAT-05K48M0B-02 - Three Phase Inverter Connection Only DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application. Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh). Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations. Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power. Includes enhanced safety features for battery protection. Simple plug and play installation, with automatic SetApp-based configuration Weight: 305 kgBattery Type: Lithium IonNominal Energy: 13800 WhDepth of discharge: 90.00 %Voltage: 51 VContinuous Discharge Rate (Normal Use): 5000 WMaximum Discharge Rate (5 Minutes): 5000 WSurge Discharge Rate (15 Seconds): 5000 WMaximum Charge Rate (5 Minutes): 5000 W

SolarEdge Home Battery Home Battery 48V V2 - 3PH Low Voltage 2x 4.6kWh module #2: SE-BATTERY-4.6kWH-02-2-9.2 SolarEdge 4.6kWh Datasheet SolarEdge 4.6kWh Manual SolarEdge 4.6kWh Warranty This product contains 2 x SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module BAT-05K48M0B-02 - Three Phase Inverter Connection Only DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application. Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh). Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations. Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power. Includes enhanced safety features for battery protection. Simple plug and play installation, with automatic SetApp-based configuration   Weight: 122 kgBattery Type: Lithium IonNominal Energy: 9200 WhDepth of discharge: 90.00 %Voltage: 51 VContinuous Discharge Rate (Normal Use): 5000 WMaximum Discharge Rate (5 Minutes): 5000 WSurge Discharge Rate (15 Seconds): 5000 WMaximum Charge Rate (5 Minutes): 5000 W

SolarEdge Home Battery Home Battery 48V V2 - 3PH Low Voltage 3 x 4.6kWh module = 13.8kWh #2: SE-BATTERY-4.6kWH-02-3-13.8 SolarEdge 4.6kWh Datasheet SolarEdge 4.6kWh Manual SolarEdge 4.6kWh Warranty   This product contains 3 x SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module BAT-05K48M0B-02 - Three Phase Inverter Connection Only DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application. Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh). Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations. Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power. Includes enhanced safety features for battery protection. Simple plug and play installation, with automatic SetApp-based configuration   Weight: 183 kgBattery Type: Lithium IonNominal Energy: 13800 WhDepth of discharge: 90.00 %Voltage: 51 VContinuous Discharge Rate (Normal Use): 5000 WMaximum Discharge Rate (5 Minutes): 5000 WSurge Discharge Rate (15 Seconds): 5000 WMaximum Charge Rate (5 Minutes): 5000 W

SolarEdge Home Battery Home Battery 48V V2 - 3PH Low Voltage 4x 4.6kWh module = 18.4kWh #2: SE-BATTERY-4.6kWH-02-4-18.4 SolarEdge 4.6kWh Datasheet SolarEdge 4.6kWh Manual SolarEdge 4.6kWh Warranty   This product contains 4 x SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module BAT-05K48M0B-02 - Three Phase Inverter Connection Only DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application. Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh). Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations. Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power. Includes enhanced safety features for battery protection. Simple plug and play installation, with automatic SetApp-based configuration Weight: 244 kgBattery Type: Lithium IonNominal Energy: 18400 WhDepth of discharge: 90.00 %Voltage: 51 VContinuous Discharge Rate (Normal Use): 5000 WMaximum Discharge Rate (5 Minutes): 5000 WSurge Discharge Rate (15 Seconds): 4096 WMaximum Charge Rate (5 Minutes): 5000 W

SolarEdge Home Hot Water Controller, 3kW #2: SMRT-HOT-WTR-30-S2 SolarEdge Home Hot Water Datasheet SolarEdge Home Hot Water Manual SolarEdge Home Hot Warranty SolarEdge Smart Energy Hot Water System The SolarEdge Smart Energy Hot Water System is designed to maximize self-consumption of solar energy by storing excess electricity as hot water. Perfectly integrated with the SolarEdge Home ecosystem, it provides a streamlined solution for homeowners looking to optimise solar usage and reduce reliance on the grid. With wireless communication and intelligent energy management, this system ensures your hot water is heated efficiently, safely, and automatically using your available solar energy. Key Features ✅ Maximises solar self-consumption – stores excess PV energy as hot water ✅ Seamless integration – part of the complete SolarEdge Home ecosystem for easy warranty, support, and installation ✅ Automatic power adjustment – supplies any available PV power up to 5.0kW to the water heater ✅ Wireless communication – connects to the inverter via SolarEdge Home Network, reducing wiring and installation errors ✅ Built-in water tank consumption meter – track energy usage for your hot water system ✅ Easy installation – simple wall-mount design ✅ Optional temperature sensor – optimises heating for comfort and efficiency ✅ Designed for resistive loads only – ideal for electric water heating Benefits Efficient energy use – reduces electricity bills by using excess solar power for water heating Simplified installation – fewer cables and reduced labor costs thanks to wireless communication Integrated monitoring – track hot water energy consumption via SolarEdge Home system Flexible and scalable – easily integrates into existing SolarEdge PV and storage setups ✅ The SolarEdge Smart Energy Hot Water System is a smart, efficient, and easy-to-install solution for maximizing solar energy self-consumption while providing reliable hot water.

SolarEdge Home Network - StorEdge Inverters (RWS), inc. Comms Board #2: ENET-HBPV3S-01 SolarEdge Energy Net – StorEdge HD-Wave Inverters & 48V Home Battery The SolarEdge Energy Net is a dedicated communication module designed for StorEdge HD-Wave Single Phase Inverters and 48V Home Battery systems. It includes the required comms board to enable seamless integration between your inverter and home battery, ensuring smooth operation and optimal energy management. Compatibility Note: This Energy Net is compatible only with StorEdge Single Phase Inverters with part codes ending in RWS, or SolarEdge part numbers SExxxxH-RWSxxBNxx. Key Features & Benefits ✔ Seamless Communication Enables full integration between your StorEdge HD-Wave inverter and 48V home battery. Ensures reliable monitoring and control of energy storage and usage. ✔ Easy Installation Includes the comm board required for setup. Designed for quick, plug-and-play installation with compatible inverters. ✔ Optimised Energy Management Supports efficient home energy usage, storing and using solar power effectively. Works with SolarEdge monitoring platforms for real-time insights. Technical Specifications Compatible Systems: StorEdge Single Phase Inverters (RWS codes) & 48V Home Battery Included Components: Comms Board Manufacturer: SolarEdge ⚡ Enhance your StorEdge solar system with the SolarEdge Energy Net, providing reliable communication and optimised energy storage for a smarter home energy setup.

SolarEdge Home Network Plug-in and Antenna #2: SE1000-ZB06-MOD#4: ENET-HBCL-01 SolarEdge Wireless Home Energy Management – Device Control Solution Take control of your home energy system with the SolarEdge Wireless Home Energy Management Device. This solution provides efficient monitoring and device control, ensuring your solar setup works smarter. Key Features ZigBee Module – Supports Home Energy Management (HEM) Device Control functionality. Network Management – Acts as the HEM Device Control network manager. Durable Installation – Installed inside the inverter enclosure for reliable outdoor performance. Extended Range – External antenna delivers wider coverage and stronger connectivity. Compatibility Not Compatible With – SolarEdge WiFi Module Kit or WiFi-enabled SolarEdge inverters. SetApp Inverters – Not supported. Energy Net Ready – Can be used with SolarEdge Energy Net for SetApp inverters when not using cellular or ZigBee devices. Why Choose This Device? The SolarEdge Wireless HEM Device provides seamless integration with your energy system, improving efficiency and control. Protect your investment while optimising energy use with a trusted solution from SolarEdge.

SolarEdge P1100 Optimizer 1100W MC4 2 x high power or bi-facial modules #2: P1100-2.4-MC4 SolarEdge Module-Level Power Optimiser – Short Cable Version Maximise energy harvest and reduce installation costs with the SolarEdge module-level power optimiser, designed specifically for commercial and large-scale solar installations. This short-cable version offers a compact, cost-effective solution that delivers up to 25% more energy while simplifying system design. High Efficiency and Superior Performance Achieves 99.5% efficiency for optimal power conversion. Supports two PV modules connected in series or parallel. Compatible with three-phase inverters SE25K and larger. Cost-Effective Commercial Solution Reduces Balance of System (BoS) costs with up to 50% fewer cables, fuses, and combiner boxes. Enables longer string lengths, over twice the standard, for larger commercial arrays. Fast installation with a single-bolt mounting system. Advanced Safety and Maintenance Provides module-level voltage shutdown for installer and firefighter safety. Remote monitoring at module-level allows quick diagnostics and maintenance. Ideal for commercial setups where reliability and safety are paramount. Technical Specifications Input Cable Length: 0.16 m Output Cable Length: 2.4 m Warranty: 25 years Compatibility: Designed to work seamlessly with SolarEdge three-phase inverters SE25K and above Why Choose SolarEdge Power Optimisers?SolarEdge module-level power optimisers increase energy yield, enhance system safety, and reduce overall installation costs, making them a smart choice for commercial solar PV projects. With easy installation, advanced monitoring, and long-term reliability, this optimiser ensures your solar system delivers maximum performance for decades.

SolarEdge P801 Optimiser 800W MC4 2x72 Cell 2.2m 2: P801-MC4#3: 3479 SE P801 Optimiser Data Sheet SE P801 Optimiser Installation Manual SE P801 Optimiser Warranty SE P801 Optimiser Certification Minimum order: 6 Units SolarEdge P801-4RMLMRY Power Optimiser The SolarEdge P801-4RMLMRY Optimiser is the most cost-effective solution for commercial and utility-scale PV installations. Specifically designed for use with SolarEdge inverters, it allows two 72-cell modules to be connected in series or parallel, enabling longer string lengths and reduced Balance of System (BoS) costs. With superior efficiency (99.5%) and module-level monitoring, it ensures maximum energy harvest, easier maintenance, and enhanced safety. Key Features Designed for large SolarEdge inverters (SE-16000 and above) Connect two PV modules per optimiser (series or parallel) Up to 25% more energy yield compared to traditional setups Superior efficiency – 99.5% Reduce BoS costs: 50% fewer cables, fuses, and combiner boxes Longer strings possible – over 2x standard lengths Fast installation with a single bolt design Advanced maintenance with module-level monitoring Module-level shutdown for enhanced installer and firefighter safety Technical Specifications Model: P801-4RMLMRY For Panels: 72-cell (2 in series, landscape) Cable Lengths: Input 0.9m / Output 2.2m Weight: 1.05 kg Min PPT Voltage: 13 V Max PPT Voltage: 105 V DC Startup Voltage: 13 V DC Shutdown Voltage: 13 V Max Input Voltage: 125 V Max DC Power: 800 W Max DC Current: 11.75 A Max DC Inputs: 2 Connector Type: MC4 (2 included) Euro Efficiency: 98.6% Transformer: N/A MPPT Channels: 1 Integrated DC Switch: No Warranty: 25 years Why Choose the SolarEdge P801 Optimiser? The P801-4RMLMRY is purpose-built for large-scale solar projects, offering: Higher energy yield per module Reduced installation time and costs Unmatched reliability with a 25-year warranty It’s the perfect choice for commercial rooftops and utility fields where efficiency, safety, and long-term performance are critical.

SolarEdge Power Management package <100A grid supply #2: SE-PM-WND-1PH-100A Power Management - Export Limitation 1ph#3: 2111#3086#4: SE-WND-3Y400-MB-K2 SolarEdge Domestic Energy Monitoring Kit – Full System Optimisation This SolarEdge Energy Monitoring Kit is a complete package designed for domestic solar PV systems, providing full recording and display of energy generation and usage. It ensures your system operates at maximum efficiency, allowing you to optimise energy consumption while monitoring performance in real time. Kit Contents 1 x SolarEdge Energy Meter K2 (1PH/3PH, 230/400V) with Modbus Connection SKUs: SE-PM-WND-1PH-100A, SolarEdge Energy Meter with Modbus Connection, SE-WND-3Y400-MB-K2 1 x 100A Split-Core Current Transformer (CT) for SolarEdge Energy Meters SKUs: SE-ACT-0750-100, SECT-SPL-100A-A 10 x Double Pair RS485 Cables (1M, 4 cores) SKU: RS485-DOUBLE-1M Note: For systems with multiple inverters, an additional RS-485 expansion kit may be required to connect all inverters to the energy meter and communication bus. A 10m RS-485 cable is included for connecting the inverter to the meter and linking inverters together. Key Features Full energy monitoring for SolarEdge domestic PV systems Optimises energy consumption and system performance Export limitation capability (subject to local DNO approval) Automatically trims AC export power to DNO-defined limits during high generation/low self-consumption periods Includes 100A current monitoring clamps for properties with up to 100A per phase supply Compatible with single or multiple inverter systems (additional accessories may be required) How Export Limitation Works With this kit, you can limit the system’s AC export power to a value agreed with your local Distribution Network Operator (DNO). For example: A 100kWp PV system with 85kW of inverters could be limited to 75kW AC export power if required by the DNO. During periods of high self-consumption (e.g., weekdays), no limitation is applied, allowing maximum on-site energy use. During high generation/low consumption periods, the system will automatically reduce export, ensuring compliance while the impact on annual generation is minimal. Installation Notes Current clamps must be sized according to the property’s incoming grid supply; other CT options are available if required. Qualified installation is recommended to ensure correct operation and compliance. Why Choose the SolarEdge Energy Monitoring Kit? This all-in-one monitoring kit is ideal for UK households seeking complete visibility and control over their solar PV system. By combining an energy meter, current clamps, and RS485 cabling, it allows you to optimise energy generation, manage export limits, and maximise self-consumption, ensuring your system performs at its best year-round. Order now from ITS Technologies – your trusted UK supplier for SolarEdge monitoring solutions, inverters, and energy management systems.

Solaredge Power management package for up to 250A grid supply with Modbus Connection Part No: SE-PM-WND-3PH-250A Power Management - Export Limitation 3ph This part is made up of the following items: 1 x 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 3 x 250A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 1 x SolarEdge RS485 Plug-in 20 x Double pair genuine RS485 cable 1M - 4 cores This kit is a full monitoring package for Solaredge commercial systems that allows full recording and display of energy generation and usage. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption. Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 100kWp PV system with 85kW of inverters could be limited to 75kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday - Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this 'lost' energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times. Note: This kit includes 1x RS485 Expansion Kit, which means its only suitable for systems with 2x inverters. If more than 2x inverters on site additional RS485 Kit per inverter will be required, if only one inverter on site this part will not be required. A 20m length of RS-485 cable is included for connection between the first inverter and energy meter, and for connecting the inverters in the bus. Please check if this quantity is sufficient. Supplied with 3 X 250A current monitoring clamps suitable for installation on properties with up to 250A per phase power supply. Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note smaller CTs are available

Solar Edge S650B Power Optimizer #2:S650-B-MC4 S650B Datasheet S650B Product Update S650B Installation guide S650B Warranty SolarEdge S-Series Power Optimizer – Smarter, Safer, Faster Product Overview The S-Series Power Optimizer from SolarEdge brings advanced safety and efficiency to residential solar systems. Designed to work seamlessly with SolarEdge inverters, it maximizes energy production, minimizes losses, and makes installation faster and simpler. Key Features & Benefits Module-Level Optimization: Reduces all types of module mismatch losses, from manufacturing tolerances to partial shading. Enhanced Safety: Detects abnormal PV connector behavior and features module-level voltage shutdown for installer and firefighter protection. Faster Installation: Simplified cable management and single-bolt assembly for quicker setup. Flexible System Design: Compatible with bifacial PV modules and optimized for maximum rooftop space utilization. Superior Efficiency: Operates at 99.5% efficiency for reliable energy generation. Durable & Reliable: Backed by a 25-year warranty for long-term peace of mind. Technical Specifications Weight: 0.79 kg Min PPT Voltage: 0 V Max PPT Voltage: 105 V DC Startup/Shutdown Voltage: 8 V Max DC Power: 650 W Max DC Current: 15 A DC Inputs: 1 Connector: MC4 Included Connectors: 0 Euro Efficiency: 0 % Transformer: N/A MPPT Quantity: 1 Integrated DC Switch: No Warranty: 25 years Why Choose SolarEdge S-Series? With patented optimization technology, enhanced safety features, and simplified installation, the S-Series Power Optimizer ensures maximum performance and reliability for residential solar rooftops.  

SolarEdge Smart EV Charger - 22kW 3p, Socket Type 2, RFID, MID, (for UK) Un-Tethered #4: SE-EVK22URM-01 SolarEdge EV Charger 22kW Data Sheet SolarEdge EV Charger 22kW Installation Manual SolarEdge EV Charger 22kW Registering EV Charger SolarEdge Smart EV Charger – Intelligent Home Charging The SolarEdge Smart EV Charger integrates seamlessly with the SolarEdge Home range, allowing homeowners to control and optimise all household energy through the mySolarEdge app. Efficiently use excess PV energy to charge your electric vehicle while taking advantage of smart scheduling and monitoring features. Key Features Optimised Solar Charging: Utilises excess solar PV energy to charge your EV. Custom Scheduling: Automatically charge during low-tariff periods, at night, or even during power outages. Flexible Installation: Suitable for three-phase indoor or outdoor setups. Smart Monitoring: Control and monitor charging remotely via the mySolarEdge app, including charging schedules and history. G-100 Compliant: Meets industry standards for safety and performance. Optional RFID Authentication: Enhanced security with optional card authentication and MID meter. Tamper Detection: Alerts you to any tampering attempts for added peace of mind. Warranty: 3-year manufacturer warranty. Specifications Nominal AC Output Voltage: 3 x 230 / 400 V Protection Rating: IP54 Compatible Inverters: All SetApp-enabled residential inverters up to SE15K (excluding Single Phase with Communication Interface) Connectivity: Ethernet 1 & 2, WLAN/Wi-Fi supported Cable Length (for cabled variants): 6m Dimensions (H x W x D): 260 x 580 x 390 mm Why Choose SolarEdge EV Charger? Designed for efficiency, flexibility, and smart home integration, the SolarEdge Smart EV Charger allows you to maximise self-consumption, save on electricity costs, and enjoy intelligent control of your EV charging from anywhere.

SolarEdge Smart EV Charger - 7.4kW, 1ph, 6m Cable Type 2, (for UK) #4: SE-EVK74C00-01 SolarEdge EV Charger 7.4kW Data Sheet SolarEdge EV Charger 7.4kW Installation Manual SolarEdge EV Charger 7.4kW Registering EV Charger SolarEdge Smart EV Charger – Optimise Your Home Energy Charge your electric vehicle efficiently using excess solar power with the SolarEdge Smart EV Charger. Seamlessly integrated with the SolarEdge Home range, this tethered single-phase charger allows homeowners to monitor and control both PV and EV energy from the mySolarEdge app. Key Features Smart Solar Integration Uses excess solar energy to charge your EV, reducing reliance on the grid. Dynamic balancing of charging power output for efficient energy use. Remote Monitoring & Control Monitor PV, EV, and grid consumption from a single app. Customise charging schedules to take advantage of off-peak rates and Time-of-Use (TOU) tariffs. Manual TOU scheduling for one-off charging events. Safe & Compliant G100 Issue 2 Amendment 2 compliant. Tamper protection and main circuit breaker protection. Mode 3 charging combines PV and grid electricity safely. Convenient Design Tethered 6m Type 2 cable included. Install up to three chargers per residential site. Supports vertical wall installation with local network communication (Ethernet, LSA+, Wi-Fi). Warranty 3-year manufacturer warranty for peace of mind. Installation Requirements Must include an Earth Electrode. Residential systems only. Must be installed with an inverter and meter. Communicates with cloud and inverter via local network router. Technical Specifications Phases: Single Phase EV Power Rating: 7.4 kW Dimensions: 260 x 764 x 385 mm (H x W x D) Why Choose the SolarEdge Smart EV Charger? The SolarEdge Smart EV Charger maximises solar energy usage while providing flexible, safe, and efficient charging for your electric vehicle. Integrated monitoring, smart scheduling, and TOU optimisation ensure you get the most from your home solar system while saving on electricity costs.

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE25K-RW00IBNJ4 SolarEdge 25kW Datasheet SolarEdge 25kW Manual SolarEdge 25kW Warranty SolarEdge 25kW G99 Certificate   SolarEdge SE25K-RW00IBNJ4 – 25kW Three Phase Commercial Inverter Upgrade your commercial or large-scale rooftop solar installation with the SolarEdge SE25K-RW00IBNJ4, a high-efficiency, lightweight three-phase inverter with advanced monitoring and safety features. Key Features Rated Power: 25,000 W – ideal for medium to large commercial PV systems Three-Phase Design: Supports robust, stable energy output Built-in Module-Level Monitoring: Ethernet, wireless, and GSM communication Smart Setup: Easy configuration via SolarEdge SetApp on your smartphone Safety & Protection: Type 2 DC and AC surge protection Arc fault protection DC safety unit for external DC isolators Weatherproof Design: IP65-rated for outdoor installations Compatibility: Works seamlessly with S1200 optimisers Technical Specifications Part Number: SE25K-RW00IBNJ4 Weight: 32 kg Min PPT Voltage: 750 V Max PPT Voltage: 1,000 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 25,000 W Max DC Current: 36.25 A Max DC Inputs: 4 DC Fuses: 8 Connector Type: MC4 Included Connectors: 4 Efficiency: 98% Euro Efficiency Transformer: None MPPT Quantity: 0 Integrated DC Switch: Yes Warranty: 12 years Benefits for Your Installation Lightweight and compact – easier to install on rooftops or ground-mount systems Reliable commercial performance – maximises energy yield Advanced safety features – reduces risk and protects your system Remote monitoring – track system performance anytime via SolarEdge SetApp

SolarEdge Three Phase Inverter, 25kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE30K-RW00IBNJ4 SolarEdge 30kW Datasheet SolarEdge 30kW Manual SolarEdge 30kW Warranty SolarEdge 30kW G99 Certificate   SolarEdge SE30K-RWR0IBNZ4 30kW Three Phase Inverter – Commercial Solar Solution The SolarEdge SE30K-RWR0IBNZ4 is a high-performance, three-phase inverter ideal for medium to large commercial rooftop and ground-mounted solar installations. Designed for efficiency and reliability, this inverter features built-in module-level monitoring, advanced safety features, and easy smartphone configuration via the SolarEdge SetApp. Key Features Built-in module-level monitoring with Ethernet, wireless, and GSM communication Easy configuration using smartphone and SolarEdge SetApp Lightweight and compact design for easy installation Type 2 DC and AC surge protection for robust system safety Arc fault protection to ensure safe operation IP65 rated for outdoor installations DC safety unit included for external DC isolators Compatible with S1200 Optimisers for flexible system design Technical Specifications Specification Details Supplier Part No SE30K-RW00IBNJ4 Weight 32 kg Rated Power 30,000 W MPPT Voltage Range 13 V – 60 V DC Startup Voltage 0 V DC Shutdown Voltage 0 V Max Input Voltage 1,000 V Max DC Power 45,000 W Max AC Power (5 min) 29,990 W Surge AC Power (1 sec) 29,990 W Max DC Current 43.5 A Max DC Inputs 4 DC Fuses 0 Connector Type MC4 Included Connectors 0 Euro Efficiency 98% Transformer None MPPT Quantity 0 Integrated DC Switch Yes Warranty 12 years Why Choose the SolarEdge SE30K Inverter? The SolarEdge SE30K-RWR0IBNZ4 is perfect for UK commercial solar installations requiring high efficiency, reliability, and smart monitoring capabilities. With easy smartphone setup, robust safety features, and module-level optimisation, this inverter ensures maximum performance, safety, and long-term value for your solar PV system. Order now from ITS Technologies – the UK’s trusted supplier for commercial SolarEdge inverters, optimisers, and smart energy solutions.

SolarEdge Three Phase Inverter, 33.3kW, MC4, DC safety unit with switch, AC & DC SPD, AC/DC Segregation #2: SE33.3K-RW00IBNJ4 SolarEdge 33.3kW Datasheet SolarEdge 33.3kW Manual SolarEdge 33.3kW Warranty SolarEdge 33.3kW G99 Certificate   SolarEdge SE33.3K – 33.3kW Three-Phase Inverter with SetApp The SolarEdge SE33.3K is a high-performance three-phase inverter designed for medium to large commercial rooftop and ground-mount solar installations. With SetApp smartphone configuration, built-in module-level monitoring, and advanced safety features, it ensures maximum efficiency, reliability, and ease of installation. Optimised for SolarEdge S1200 Power Optimisers, this inverter delivers superior energy harvesting and compliance with international standards for commercial PV systems. Key Features ✅ 33.3kW rated power for medium to large-scale installations ✅ SetApp configuration – easy setup using smartphone ✅ Module-level monitoring via Ethernet, wireless, and GSM ✅ Small and lightweight – simplified installation ✅ IP65 rated – dust and water resistant ✅ Type 2 DC and AC surge protection ✅ Arc Fault protection for enhanced safety ✅ DC safety unit with integrated DC switch ✅ Compatible with SolarEdge S1200 Optimisers Technical Specifications General Supplier Part No: SE33.3K-RW00IBNJ4 Weight: 32 kg Rated Power: 33,300 W Euro Efficiency: 98% Warranty: 12 years Transformer: None Voltage & Current Min PPT Voltage: 750 V Max PPT Voltage: 1,000 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 1,000 V Max DC Power: 50,000 W Max AC Power (5 Minutes): 33,300 W Surge AC Power (1 Second): 33,300 W Max DC Current: 48.25 A Max DC Inputs: 4 Connections & MPPT Connector: MC4 Included Connectors: 0 Has DC Fuses: 0 MPPT Quantity: 0 Integrated DC Switch: Yes Why Choose the SolarEdge SE33.3K Inverter? Ideal for medium to large commercial solar systems Ensures maximum solar energy harvesting with Power Optimisers Provides advanced safety with arc fault detection and surge protection Remote and module-level monitoring via SetApp Compact and lightweight design simplifies installation ✅ The SolarEdge SE33.3K Three-Phase Inverter is a robust, high-efficiency solution for commercial solar installations, combining smart monitoring, safety, and ease of setup.

SolarEdge Tower to Tower Cable Set for Home Battery 48V #2: SE-CABLE-T2T-4.6 Storage Systems - Battery Cable SolarEdge 48V Home Battery Datasheet SolarEdge 48V Home Battery Installation Manual SolarEdge Floor Mount Installation Guide SolarEdge 48V Home Battery Warranty Floor Mount Installation Guide

SolarEdge WiFi and ZigBee Antenna single (SetAPP ) Part No: SE-WIFI-ANTENNA Display - Web Interfaces SolarEdge Wi-Fi & ZigBee Antenna (SE-ANT-ZBWIFI-KIT) The SolarEdge Wi-Fi & ZigBee Antenna provides simple and reliable wireless connectivity for your SolarEdge system. Designed for SetApp-enabled inverters without a screen, this antenna ensures strong communication with the SolarEdge monitoring platform via Wi-Fi, and with Smart Energy devices via ZigBee. As the integrated Wi-Fi signal in SolarEdge inverters is limited in range, this external antenna is required for stable monitoring connections. Key Features Wireless Connectivity – Connects SolarEdge devices to the monitoring platform via Wi-Fi Smart Energy Integration – Enables communication with SolarEdge Smart Energy devices via ZigBee Extended Range – External antenna ensures stronger and more reliable signal coverage Indoor & Outdoor Use – Suitable for both environments 5-Year Warranty – Backed by SolarEdge for long-term reliability SetApp Commissioning – All new inverters have integrated Wi-Fi for setup, but this antenna is needed for portal monitoring Important Information ✅ Compatible with: SetApp-enabled SolarEdge inverters (without screen) ❌ Not compatible with: Older SolarEdge inverters with display 📦 Part Number: SE-ANT-ZBWIFI-KIT ⚡ Ensure reliable monitoring and smart energy communication for your SolarEdge system with this official Wi-Fi & ZigBee antenna.

SolarEdge Zigbee Module for Home Energy Management ( Set APP ) #1: SE-ZBSLV-B-S1-RW Accessories - Smart Plugs Wireless Smart Energy ZigBee Plug-In The Wireless Smart Energy ZigBee Plug-In enables seamless smart energy management for SolarEdge inverters with SetApp configuration. It acts as a Smart Energy Network Manager, connecting multiple devices for efficient monitoring and control. Key Features Smart Energy Support: ZigBee plug-in enables integration with Smart Energy applications Network Management: Functions as a central manager for your smart energy system Device Connectivity: Supports up to 10 Smart Energy devices for expanded control Extended Range: External antenna ensures wider coverage for improved communication Durable Design: Installed within inverter enclosure for outdoor resilience Why Choose This ZigBee Plug-In? Optimize your smart energy ecosystem with reliable wireless connectivity, robust outdoor performance, and the flexibility to manage multiple devices efficiently. Perfect for homeowners looking to enhance control over solar generation, storage, and energy consumption.

SolarEdge Battery Storage Installation – Astley (This is an example installation and is not available for purchase.) This project showcases a residential battery storage system in Astley, designed to provide reliable energy storage and maximise the use of solar power. Ideal for reducing electricity costs and increasing self-sufficiency. The customer had an existing Givenergy system but required power for when the grid goes down and increased storage capacity. Installation Overview The system features a SolarEdge 10kWh battery providing efficient storage and seamless integration for everyday energy needs. System Specifications SolarEdge Home Battery V2 10kWh 1ph    This installation demonstrates ITS Technologies’ expertise in delivering high-performance, safe, and scalable solar and battery solutions for residential properties. For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

SolaX 5kW G4-V2 Hybrid Inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. SolaX X1-Hybrid G4 Single Phase Hybrid Inverter & Charge Controller Overview The SolaX X1-Hybrid G4 is a fourth-generation single-phase hybrid inverter and AC charge controller, designed to deliver high-efficiency energy conversion and fast battery charging for residential PV systems. This model builds on the success of the previous generation while adding enhanced features for reliability, oversizing, and speed. Key Features Supports up to 150% PV oversizing for maximum energy production High reliability: HALT-tested, extreme temperature (-30°C to +60°C), salt spray tested, full load aging tested Fast installation: Quick setup in approximately 30 minutes Rapid charging: Can nearly fully charge a Triple Power battery in just one hour Element protection: Operates efficiently in extremely cold conditions down to -30°C Wi-Fi included: Remote monitoring and control without additional equipment Specifications Weight: 24 kg Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 DC Fuses: None Connector Type: SUNCLIX Included Connectors: 2 Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years This inverter is ideal for residential PV systems seeking fast charging, reliable operation in harsh environments, and maximized solar self-consumption.