Products

Solar & Battery Installation – Rochdale (This is an example installation and is not available for purchase.) Installation Overview Our customer in Rochdale installed a high-performance SolaX battery storage system to maximise energy usage and charge from cheap night-time electricity rates. This setup is designed for efficient energy storage and flexible home energy management. System Specifications Battery Charger: SolaX 5kW AC Battery Storage: 3 x 5.8kWh Triple Power SolaX batteries This installation highlights a smart and cost-effective energy storage solution suitable for residential properties looking to reduce grid reliance and save on electricity bills. For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.

SOLAX BMS Parallel Box G2 #2: SOLAX-BMS-PB-G2 Storage Systems - Accessory SolaX BMS Datasheet SolaX BMS Manual   SOLAX BMS Parallel Box Overview The SOLAX BMS Parallel Box is designed for use with X1 and X3 Hybrid Inverters, providing a simple way to increase your system’s storage capacity. By integrating with T30 and T58 batteries, this BMS allows you to double your battery storage efficiently.   T58 X1  Single Phase: 2, 4 or 6 Triple Power 5.8kWh batteries. Requires Master X3  Three Phase: 4, 6, 8 Triple Power 5.8kWh batteries. Requires Master T30 X1  Single Phase: 2, 4 or 6 Triple Power 3.0kWh batteries. Requires BMS X3  Three Phase: 4, 6, 8 Triple Power 3.0kWh batteries. Requires BMS Please note: Unlike G1 version of BMS-Parallel Box this G2 now requires T58 Master battery, meaning it is easier to retro-fit to existing systems. A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product. Features Increase the capacity of ESS Extend the working hours of ESS Dual-module in case Prolong the batteries life due to the alternate use of dual-module IP55 Weight: 8.7 kg Depth: 153.5 mm Height: 334 mm Width: 368 mm

SOLAX CTSA016 100A CT Clamp #2: CTSA016 CT Clamp for X1-AC   CTSA016 100A CT Clamp Installation Manual

SolaX Datahub 1000 #2: SOLAX-DATAHUB Display - Web Interfaces Solax Datahub Data Sheet Solax Datahub Install Guide Solax Datahub User Manual Solax Warranty SolaX Datahub 1000 The DataHub1000 was designed to monitor and manage your site, especially when multiple SolaX inverters are being used. With its advanced power control features, this device ensures that your system is compliant with local grid requirements. as well as tailored to enhance the performance of your energy system. Features Local & Remote monitoring Setting and upgrade of batch inverters Intelligent export control DRM control ripple control and etc. of batch inverters Support large-capacity data storage Support IEC104 protocol Specs Weight: 0.44kg

Solax Pocket WiFi 2.0 PLUS stick #3: SolaX Pocket WiFi Plus V2.0 SolaX Pocket WiFi Plus V2.0 – Enhanced Solar Monitoring Connectivity The SolaX Pocket WiFi Plus V2.0 is a compact and powerful WiFi dongle designed to enhance the connectivity of your SolaX solar inverter system. Ideal for installations located far from home routers—such as attics, garages, or outbuildings—this dongle ensures stable data transmission and reliable access to the SolaX Cloud monitoring platform. With an external antenna for extended range and an IP65-rated weatherproof design, the Pocket WiFi Plus V2.0 combines performance with durability for uninterrupted solar system monitoring. 🔑 Key Features Plug & Play Installation – quick and easy setup without complex configuration Extended WiFi Range – includes an external antenna for enhanced signal coverage IP65 Protection – weatherproof for outdoor or exposed locations Reliable Data Transmission – stable connection to the SolaX Cloud platform Low Profile Design – sleek, compact, and unobtrusive ✅ Compatible Inverters X1-Mini G3.0 and previous models X1-Boost G3.2 and previous models X1-Hybrid G4.0 and previous models X3-Mic / Pro G1 X3-Hybrid G4.1 and previous models 📦 Package Includes SolaX Pocket WiFi Plus V2.0 Dongle External Antenna Enhance your solar monitoring capabilities and enjoy reliable, long-range connectivity with the SolaX Pocket WiFi Plus V2.0. Perfect for homeowners seeking seamless remote monitoring and control of their solar energy system.

Solax Pocket WiFi stick #2 SOLAX-WIFI Display - Web Interfaces SolaX Pocket WiFi Plus V2.0 Dongle – Wireless Cloud Connectivity Enhance your SolaX solar inverter installation with seamless cloud monitoring using the SolaX Pocket WiFi Plus V2.0 Dongle. Perfect for situations where running a cable is impractical, this compact dongle connects your inverter wirelessly to your home router, enabling full access to the SolaX Cloud monitoring platform. Key Features Wireless Internet Connection: Easily connect your SolaX inverter to the cloud without running Ethernet cables. Improved Signal Coverage: External antenna boosts WiFi signal strength, ideal for attics, garages, or outbuildings. Plug & Play Installation: Quick setup with intuitive operation – no technical expertise required. Durable Design: IP65-rated protection ensures stability and reliability in challenging environments. Compatible Inverter Models: X1-Mini G3.0 and earlier X1-Boost G3.2 and earlier X1-Hybrid G4.0 and earlier X3-Mic / Pro G1 X3-Hybrid G4.1 and earlier Technical Specifications Protection Rating: IP65 Connectivity: WiFi, external antenna included Installation: One dongle required per inverter Meta Description:SolaX Pocket WiFi Plus V2.0 Dongle – wireless cloud connectivity for SolaX inverters. IP65-rated, easy plug & play setup with external antenna for enhanced WiFi signal.

Solax Pocket Wifi+LAN #2: SOLAX-WIFI-LAN Solax Data Sheet Solax WiFi Setting Instructions Solax Cloud Signing up Solax Warranty SolaX Internet Dongle – Connect Your Inverter to the Cloud Easily connect your SolaX inverter system to the SolaX Cloud with the SolaX Internet Dongle. This robust device allows both Ethernet and WiFi connections to your internet router, enabling stable and reliable communication for monitoring your solar energy system. Key Features Plug & Play Installation: Quick and easy setup for seamless connection. Dual Connectivity: Supports 10/100M Ethernet and 2.4GHz WiFi for versatile network options. IP65 Rated: Dustproof and water-resistant design ensures durability in outdoor environments. Stable Data Transmission: Reliable performance with offline data storage capability. Live Monitoring: 10-second real-time data updates for efficient system tracking. Protocol Support: Compatible with Modbus TCP and IEEE2030.5 for advanced communication. Important Information One Dongle per Inverter: Each SolaX inverter requires its own dongle. Lightweight Design: Only 0.8kg, compact and easy to install. Enhance Monitoring: Perfect for homeowners who want precise, real-time solar system insights via the SolaX Cloud. Stay connected and maximise your solar energy efficiency with the SolaX Internet Dongle.

Solax T30 Battery BMS #2: MC0600  Storage Systems - Communication Module   SolaX Triple Power 3.0kWh Data Sheet SolaX Triple Power Manual SolaX Triple Power Warranty Solax Triple Power Battery BMS Overview The Solax Battery Management System (BMS), model MC0600, is designed for use with 1 to 4 Solax Triple Power 3.0kWh batteries. It ensures safe operation, maximizes battery life, and protects against overcharge, over-discharge, and other potential hazards. Key Features Compatible with 1–4 Solax Triple Power 3.0kWh batteries Safest LiFePO4 chemistry (30 Ah) for reliable and safe energy storage Wide operating temperature range: -30°C to 50°C Cycle life: over 6,000 cycles IP65 protection: suitable for indoor or outdoor installation Low self-consumption for efficiency Quick and easy installation Free from toxic heavy metals, environmentally safe Specifications Weight: 7.5 kg Protection Rating: IP65 Battery Type: LiFePO4 Max Batteries Supported: 4 The MC0600 BMS provides a robust, safe, and efficient solution to manage your Solax battery system while maintaining optimal performance over its lifecycle. For a full list of SolaX products click here.

SolaX Triple Power 3.0kWh battery stack with BMS #2: T-BAT-H-3.0 #3: 4446 and 4502 (combined) SolaX Triple Power Data Sheet SolaX Triple Power Manual SolaX Triple Power 3.0kWh Battery Kit Experience the next generation of residential energy storage with the SolaX Triple Power 3.0kWh battery. Designed for flexibility, efficiency, and reliability, this battery is ideal for homeowners looking to maximise their solar energy usage and gain energy independence. Key Features High-Performance Lithium Battery Fully charges in just one hour for rapid energy availability Wide temperature tolerance for stable performance in varying conditions Scalable design: connect up to four batteries for a 12kWh system (depending on inverter compatibility) Plug-and-play installation with included cable kit Integrated Battery Management BMS Master Box included for safe and efficient battery control Wall mounting bracket and battery base ensure secure installation Smart monitoring and protection for long-term reliability Kit Components Included in the TP3.0 Kit 1 x SolaX Triple Power 3.0kWh Battery 1 x SolaX Master Box BMU 1 x Cable Kit Benefits Ideal for enhancing solar self-consumption and backup power Safe, reliable, and low-maintenance energy storage solution Compatible with SolaX G4 systems and most hybrid inverters For a full list of SolaX products click here.

SolaX V2 Triple Power HV 5.8kWh LFP Main Battery MASTER #2: HV-T-BAT-H-58-MASTER-V2 Storage Systems - Lion Battery Pack#3: 3211#4034 V2 batteries confirmed to be compatible with V1 slave batteries SolaX 5.8kWh Data Sheet SolaX 5.8kWh Manual SolaX 5.8kWh Warranty Solax Triple Power LFP Master Battery (T-BAT-H-58) – 5.8kWh The SolaX Triple Power LFP Battery is the ideal energy storage partner for the X1-Hybrid, X3-Hybrid, and X1-AC inverter ranges. Available as a 5.8kWh Master and 5.8kWh Slave, this modular system allows flexible scaling up to 23.2kWh. With high voltage architecture for thinner cabling, 90% depth of discharge, and 6,000 life cycles, the Triple Power battery is a reliable long-term storage solution. Key Features 5.8kWh capacity per module Scalable to 23.2kWh (Master + up to 3 Slaves, charger dependent) Up to 4kW charge/discharge rate 90% depth of discharge for optimal usage 6000 life cycles – long-lasting durability Compact, plug-and-play design – all cables supplied High-voltage design reduces cabling costs Arrives with Blue TOP (moving to Black TOP in future) Installation Notes Single-phase systems: 1x Master + max. 2 Slaves (3 batteries total) Three-phase systems: 1x Master + 2–3 Slaves (4 batteries total) Compatibility: Triple Power LFP 5.8kWh Slaves can only be paired with LFP 5.8kWh Masters. ⚠️ Not compatible with Generation 1 or 2 BMS or batteries. Technical Specifications Weight: 72.2 kg Battery Type: Lithium-Ion (LFP) Nominal Energy: 5,800 Wh Depth of Discharge: 90% Voltage: 115 V Continuous Discharge Rate (Normal Use): 2,875 W Maximum Discharge Rate (5 minutes): 4,000 W Surge Discharge Rate (15 seconds): 4,000 W Maximum Charge Rate (5 minutes): 4,000 W ✅ A future-proof, scalable battery solution, perfect for homes and businesses looking to expand storage capacity with their SolaX hybrid inverters.

SolaX V2 Triple Power HV 5.8kWh LFP Extension Battery SLAVE #3: HV11550-58-SLAVE-V2 Storage Systems - Lion Battery Pack SolaX V2 Datasheet SolaX V2 Installation Manual SolaX V2 Warranty    V2 batteries are compatible with V1 slave batteries SolaX Triple Power LFP Extension Battery (Slave) – HV11550-58 The SolaX Triple Power LFP 5.8kWh Slave Battery is designed to expand the storage capacity of your SolaX Master Battery system. Perfectly matched with the X1-Hybrid, X3-Hybrid, and X1-AC inverters, this high-performance lithium battery offers scalable energy storage up to 23.2kWh. ⚠️ Important: This is an extension (slave) battery only. It must be connected to a Triple Power 5.8kWh Master Battery (HV-T-BAT-H-58) and is not compatible with Generation 1 or 2 SolaX BMS or batteries. Key Features 🔋 5.8kWh lithium battery (Slave) – designed to work only with the Master battery 📈 Scalable to 23.2kWh – install up to 3 slaves with 1 Master (system dependent) ⚡ Up to 4kW charge/discharge rate ✅ High-voltage system – reduced cabling requirements 🛠️ Plug & play installation – supplied with cables for easy setup 🔄 90% depth of discharge – maximises usable storage 🔋 6,000+ life cycles – built for long-term reliability 🔒 Compact, modern design (Blue Top initially, moving to Black Top in newer versions) Compatibility Rules Single-phase system: 1 Master + up to 2 Slave batteries (max. 3 batteries total) Three-phase system: 1 Master + 2–3 Slave batteries (max. 4 batteries total) Only compatible with Triple Power 5.8kWh Master Battery   Technical Specifications Battery Type: Lithium Iron Phosphate (LiFePO4) Nominal Energy: 5.8kWh (5800Wh) Depth of Discharge (DoD): 90% Voltage: 115 V Continuous Discharge Rate: 2875 W Maximum Discharge Rate (5 Minutes): 4000 W Surge Discharge Rate (15 Seconds): 4000 W Maximum Charge Rate (5 Minutes): 4000 W Weight: 72.2 kg Why Choose the SolaX Triple Power LFP Slave Battery? The SolaX Triple Power Slave Battery is the ideal expansion module for growing households and businesses that want to increase storage capacity without replacing their entire battery system. With its scalable design, long lifespan, and efficient high-voltage performance, it’s a future-proof solution for clean, reliable energy storage.

SolaX Triple Power T30 3.0kWh Battery Module #2: HV10230 Storage Systems - Li-ion Battery Pack   SolaX Triple Power 3.0kWh Data Sheet SolaX Triple Power Manual Important Note This listing is for the battery module only. A Battery Management System (BMS) is required for operation and must be purchased separately (T30 Battery BMS or MC0600). Features Battery Chemistry: Lithium Iron Phosphate (LiFePO4) Capacity: 2,500 Wh (2.5 kWh) Nominal Voltage: 102 V Safest LiFePO4 technology with 30 Ah cells Depth of Discharge: 90% Smart temperature balancing for enhanced safety and efficiency Working Temperature Range: -30°C to 50°C Cycle Life: > 6,000 cycles IP65 Protection – dust and water resistant Low self-consumption Quick and easy installation Performance Specifications Continuous Discharge Rate (Normal Use): 3,072 W Maximum Discharge Rate (5 Minutes): 3,072 W Surge Discharge Rate (15 Seconds): 3,100 W Maximum Charge Rate (5 Minutes): 3,072 W Weight: 34.5 kg Summary This Solax Triple Power 2.5kWh LiFePO4 battery module is a high-performance, safe, and compact storage solution. When paired with a compatible BMS, it is ideal for scalable solar energy storage setups. For a full list of SolaX products click here.

SolaX Triple Power 6.0kWh battery stack with BMS #2:T-BAT-H-6.0 Storage Systems - Li-ion Battery Pack   SolaX Triple Power 3.0kWh Data Sheet SolaX Triple Power Manual SolaX Triple Power 6.0kWh Battery Stack with BMS Upgrade your home or commercial energy storage system with the SolaX Triple Power 6.0kWh battery stack, designed for high efficiency, safety, and scalability. This kit combines two 3.0kWh batteries with an integrated Battery Management System (BMS), providing reliable energy storage and smart system control. Key Features Advanced LiFePO4 Battery Technology Safest LiFePO4 chemistry with 30 Ah capacity Cycle life > 6,000 cycles for long-term performance Smart temperature balancing for optimal operation Wide operating temperature range: -30°C to 50°C IP65 protection for all-weather durability Efficient and Easy-to-Install Low self-consumption maximises energy efficiency Quick plug-and-play installation saves time and effort Compatible with SolaX inverters for seamless integration Kit Components Included in the 6.0kWh Stack 2 x SolaX Triple Power 3.0kWh Batteries (HV10230) 1 x SolaX Triple Power 3.0 BMS (MC0600) Specifications Weight: 76.5 kg Rated Power: 6,000 W Battery Type: Lithium Ion Nominal Energy: 6,100 Wh Depth of Discharge: 90% Voltage: 204 V Continuous Discharge Rate (Normal Use): 6,000 W Maximum Discharge Rate (5 Minutes): 5,500 W Surge Discharge Rate (15 Seconds): 8,000 W Maximum Charge Rate (5 Minutes): 6,100 W Benefits Scalable solution for home or commercial solar systems Safe, high-performance battery chemistry ensures reliability Real-time system management through integrated BMS Durable and weather-resistant for long-term outdoor or indoor use For a full list of SolaX products click here. Enhance your solar energy system with SolaX battery Triple Power T30 6.0kWh battery stack, featuring advanced BMS for optimal performance.  

SolaX X1 EPS Emergency Power Supply Box UK #1 X1-EPS-UK Display - Web Interfaces Solax X1-EPS-UK – Emergency Power Supply Box (Backup BOX 100A) The Solax EPS Box is designed to provide a simple and reliable emergency power solution for your property. It integrates two contactors, making installation straightforward and compatible with the X-Hybrid E Series inverter. With the EPS Box configured, users only need to connect a few wires between the inverter and the EPS Box. Important: Please ensure the EPS Box capacity is sufficient for the property where you plan your installation. Only connect essential loads to the EPS circuits to avoid overloading.

SolaX X1 EPS Single-Phase Emergency Power Supply Box | X1-EPS-BOX #2: X-EPS-BOX Storage Systems - Accessory Solax X1 EPS Power Supply Box  Solax EPS Datasheet SolaX Single Phase Emergency Power Supply Box – Reliable Backup Power Ensure your essential appliances stay powered during outages with the SolaX Single Phase Emergency Power Supply (EPS) Box. Designed to work seamlessly with SolaX single-phase inverters, this EPS box provides fast switchover functionality, allowing you to continue using your solar energy when the grid goes down. With a rapid 0.5-second switchover time, your home remains protected and operational when you need it most. Key Features Seamless Backup Power – Works with single-phase SolaX inverters. Quick Switchover – 0.5-second response keeps essential loads running. Whole-Home Backup – Supports full household power needs. Simplified Installation – Integrated dual contactors for quick setup. Durable Design – IP65 rated for reliable indoor and outdoor use. Technical Specifications Dimensions: 300mm x 220mm x 170mm Weight: 3.5 kg Max AC Input Current: 63 A Max EPS Input Current: 32 A Rated Output Current (EPS Mode): 32 A Operating Temperature: -20°C to +60°C

SolaX X1 Fit AC Coupled Battery charger Inverter HV 5.0kW #2: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter #3: 4614 Sola X1 RetroFit Inverter Data Sheet Solax X1 RetroFit Inverter User Manual Solax X1 RetroFit Inverter Warranty Solax X1 RetroFit G99 Certification Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX X1 RetroFit AC Charger – Upgrade Your PV System Upgrade your existing solar PV system effortlessly with the SolaX X1 RetroFit AC Coupled Inverter Charger. Designed for single-phase inverters of any brand, this retrofit solution delivers high efficiency, flexibility, and reliable performance. Ideal for residential or commercial installations. Key Features High Efficiency – Up to 97% maximum efficiency for optimal energy usage Flexible Battery Support – Supports high-voltage batteries for reduced cable thickness Wide Compatibility – Works with any single-phase inverter brand Remote Monitoring – Monitor performance via SolaX XCloud Quiet & Low Maintenance – Natural cooling design for silent operation Technical Benefits Max Charge/Discharge – 6 kW Installation – Indoor or outdoor rated Smart Grid Ready – Supports grid trading with <0.5s response time Flexible Charging – Grid charging possible Connectivity – WiFi or LAN stick available separately Battery Requirements Minimum of 1 Solax battery per X1 AC inverter Maximum of 3 batteries, all must be same capacity (cannot mix 4.5kWh and 6.3kWh batteries) Compliance UK tested and certified under G98/G99 standards Requires latest firmware and hardware version for compliance The SolaX X1 RetroFit AC Charger is the perfect solution to extend the life and capabilities of your PV system while providing smart, high-efficiency energy management.

SolaX X1 3kW G4-V2 Hybrid inverter with WiFi #2: X1-HYBRID-G4-3.0-V2#3: 4329 SolaX X1 G4 Hybrid 3.0D (inc. WiFi dongle) £995 +VAT For a full list of SolaX products click here. SolaX 3kW Data Sheet SolaX 3kW Installation Manual SolaX 3kW Warranty SolaX 3kW G98 Certificate   SolaX G4 Hybrid/AC Charger Inverter – 3.0kW (4th Generation) The SolaX G4 Hybrid/AC Charger Inverter is the fourth generation of SolaX’s highly successful inverter range, building on the proven reliability of the G3 series while introducing new performance enhancements. Designed for both residential and light commercial use, it delivers efficient solar power management with rapid charging and robust durability. Key Features of the G4 Series Supports up to 150% PV Oversizing – maximise solar array capacity for greater energy harvest Fast Charging Speeds – can almost fully charge a Triple Power battery in just one hour High Reliability – passed HALT testing, extreme temperature cycles, salt spray, and full-load ageing tests Quick Installation – 30-minute install reduces time on-site Element Protection – operates at full load in harsh conditions, down to -30°C Proven Durability – engineered for long-lasting performance in demanding environments Technical Specifications Weight: 24 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 min): 3,300 W Surge AC Power (1 sec): 3,900 W Max DC Current: 28 A DC Inputs: 2 MPPT Quantity: 2 Connector Type: SUNCLIX (2 included) Efficiency (Euro): 97% Transformer: None Integrated DC Switch: No Warranty: 10 Years Why Choose the SolaX G4 Hybrid/AC Charger? The SolaX G4 series is designed for homeowners and installers who need high efficiency, rapid charging, and maximum reliability in a compact solution. With support for PV oversizing, extreme temperature operation, and cutting-edge battery integration, it offers a future-proof solar inverter system that is easy to install and simple to manage.

SolaX X1 3.7kW G4 Hybrid single phase battery storage Inverter HV   #2: X1-HYBRID-G4-3.7#3: 4336 Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX G4 HV Single Phase Hybrid Inverter & Charge Controller – Reliable, High-Performance Energy Management The SolaX G4 HV Single Phase Hybrid Inverter and Charge Controller range represents the fourth generation of SolaX hybrid inverters. Building on the proven features of the previous G3 range, the G4 introduces advanced enhancements that maximise efficiency, reliability, and ease of installation for residential and commercial solar PV systems. Key Features Supports Up to 150% PV Oversizing – Connect more solar panels than ever before to ensure your system consistently produces the maximum energy possible. High Reliability in Harsh Environments – Tested to withstand extreme conditions including: High and low temperature extremes HALT (Highly Accelerated Life Test) Salt spray exposure Full-load aging tests Rapid Installation – Designed for fast setup, reducing on-site installation time to approximately 30 minutes. Fast Charging Speeds – Capable of nearly fully charging a triple-power battery in just one hour, allowing for greater energy storage in less time. Element Protection & Extreme Cold Operation – Operates at full load even in temperatures as low as -30°C, ensuring uninterrupted performance in all climates. Why Choose the G4 Range The SolaX G4 HV hybrid inverters combine cutting-edge technology with practical enhancements to provide: Increased PV system efficiency Reliable performance in demanding environments Simplified installation and maintenance Rapid energy storage and discharge for flexible energy management Applications Ideal for UK homeowners and installers looking for: Single-phase hybrid inverter solutions High-capacity battery integration Long-lasting, weather-resistant solar PV systems

SolaX X1-FIT G4 7.5W (AC Coupled Inverter) #3: 4578 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty Solax X1 FIT G99 Certification   SolaX X1-FIT G4 7.5kW (AC Coupled Inverter) The SolaX X1-FIT G4 7.5kW AC Coupled Inverter Charger is designed to upgrade existing solar PV systems with reliable battery storage functionality. Compatible with any single-phase inverter brand, it delivers up to 97% efficiency and is built for both indoor and outdoor installations. With remote monitoring via the SolaX Cloud, homeowners can optimise energy usage and maximise savings. Benefits of the SolaX X1-FIT G4 Store excess solar energy for later use, reducing grid reliance Provides emergency power supply (EPS) during power cuts Compact, lightweight design with IP65 weatherproof rating Supports grid trading applications with rapid response times Compatible with high-voltage batteries, reducing cabling costs Advanced Features High Performance & Efficiency Max. efficiency: 97% Max. 7.5kW power output with 40A current AC attributes: Single-phase, 7500W max power Smart Energy Management VPP (Virtual Power Plant) function for smart grid trading Remote firmware upgrades and control Flexible peak shaving to balance grid demand Charging from the grid supported Reliable & Low Maintenance Natural cooling system for quiet operation Robust IP65 rating for indoor/outdoor use WiFi or LAN connectivity options available separately Technical Specifications AC Attributes Max Power: 7500W Max Current: 40A Phases: 1 System Performance Max Efficiency: 97% IP Rating: IP65 Weight: 23kg Dimensions: 482 × 417 × 181mm For a full list of SolaX products click here.

SolaX X1-SMART-G2 8.0kW 1ph 3MPPT Inverter (incl. WiFi and DC) #3: 6684 SolaX X1-SMART-G2 8.0.kW Data Sheet SolaX X1 SMART-G2. 8.0kW User Manual Part 1 SolaX X1-SMART-G2 8.0kW User Manual Part 2 SolaX X1-SMART-G2 8.0kW Installation Manual Part I SolaX X1-SMART-G2 8.0kW Installation Manual Part 2 For a full list of SolaX products click here. SolaX Single-Phase 2nd Generation Inverter The SolaX single-phase inverter is designed for maximum energy harvesting with a wide MPPT voltage range. Its advanced DSP control technology ensures a high efficiency of up to 97.4%, making it an ideal choice for residential solar systems. Features High efficiency performance Low start-up voltage for early energy capture Compact and lightweight design Remote monitoring capabilities Compatible with WiFi V2.0 IP66 rated for robust outdoor installation 5-year warranty Specifications Weight: 19.5 kg Maximum Efficiency: 98.2% Maximum AC Current: 34.8 A Maximum AC Power: 8,000 W DC Startup Voltage: 50 V Max DC Power: 16,000 W Max Voc Voltage: 560 V Start-up Current: 50 A MPPT Voltage Range: 100 – 560 V Number of MPPTs: 3 Dimensions (H x W x D): 513 x 370 x 170 mm  

SolaX X3 G4-V2 Hybrid 3 Phase Inverter HV 10.0kW #2: X3-HYBRID-G4-10.0-V2#3: 4574 SolaX X3 Hybrid Data Sheet SolaX X3 Hybrid Manual SolaX X3 Hybrid Warranty SolaX X3 Hybrid G100 Certificate For a full list of SolaX products click here. SolaX X3 10.0kW Hybrid Inverter High Efficiency Supports 150% PV oversizing and 110% overload output Maximum 150% overload output High efficiency for charging and discharging, up to 97.5% Built-in shadow tracking function for optimal energy harvest Economic Performance Maximum 16A DC input current, compatible with high-power solar panels Stores surplus PV energy to the battery Low start output voltage extends inverter working time Minimal energy loss from battery to inverter Intelligent Features Switchover time: <10ms for uninterrupted power Quick configuration via U-disk Compatible with Lithium and Lead-acid batteries CT compatible, with loads responding within 0.3s Intelligent load management (e.g., heat pumps) On & Off-grid parallel function, scalable up to 150kW 5 work modes, 2 charging periods available VPP ready, supports ancillary services in power markets Three-phase unbalanced output: up to 50% nominal output on a single phase Connectivity Wi-Fi included with Solax X3-Hybrid-G4 V2 – no additional equipment required Specifications Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 min): 10,001 W Surge AC Power (1 sec): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 DC Fuses: None Connector: SUNCLIX Included Connectors: 0 Euro Efficiency: 97% Transformer: HF

SolaX X3 G4 Hybrid Inverter12.0D #3: 4575 SolaX X3 Hybrid Data Sheet SolaX X3 Hybrid Warranty SolaX X3 Hybrid G100 Certificate For a full list of SolaX products click here.   SolaX X-Hybrid 4th Generation – Three-Phase Hybrid Inverter Overview The SolaX X-Hybrid 4th Generation builds on the proven features of the previous generation, offering enhanced performance and improved functionality. This hybrid solar PV inverter and battery storage controller allows for efficient conversion of solar energy while storing surplus energy in batteries for later use. When retrofitting, it replaces your existing inverter and must be sized like a standard inverter. AC Attributes Maximum Power: 12,000 W Maximum Current: 19.3 A Number of Phases: 3 DC Attributes Maximum Power: 18,000 W Maximum Short-Circuit Current (Isc): 20 A Maximum Voltage: 1,000 V Start-Up Voltage: 200 V Key Benefits Hybrid functionality for simultaneous solar generation and battery storage Compatible for retrofit or new installations Efficient energy management across AC and DC inputs Suitable for medium to large-scale residential or commercial installations This inverter is ideal for homeowners or businesses looking for flexible hybrid energy solutions with high efficiency and scalable battery integration.

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 10kW #2: X3-FIT-10#3: 4749 Solax X3 Inverter Data Sheet Solax X3 Inverter User Manual Solax X3 Inverter Warranty Solax X3 Inverter G99 Certification Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.   Three-Phase Retro Fit 10.0kW AC Coupled Inverter Product Features Compatible with high-voltage batteries IP65 protection rating Natural cooling for low maintenance Maximum efficiency up to 96% EPS Functionality This is the W version of the inverter with a built-in EPS function. An external backup box is required to fully utilise the EPS capability. Battery Compatibility Supports 2 to 4 Solax Triple Power Batteries (all batteries must be the same size per system). Scalability This inverter can be paralleled up to 5 units per site, offering flexible expansion for larger installations.

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 8kW #2: X3-FIT-8#3: 4748 Solax X3 8kW Inverter Data Sheet Solax X3 8kW Inverter User Manual Solax X3 8kW Inverter Warranty Solax X3 Inverter G99 Certification SolaX X3-FIT Series 3-Phase AC Coupled Hybrid Inverter Product Overview The SolaX X3-FIT Series is a fourth-generation, 3-phase AC coupled hybrid inverter designed for maximum solar energy utilisation. This retro-fit inverter directs excess solar energy into your battery for later use and can act as a backup power supply during grid outages, sending stored energy back to your home. Key Features Virtual Power Plant (VPP) Function Supports VPP integration for smart energy management Emergency Power Supply (EPS) Switchover time <10ms Provides up to 150% output for 60 seconds during power loss Flexible Energy Management Max. 110% nominal apparent AC power Flexible peak shaving for optimised energy use Optional three-phase unbalanced output Connectivity Compatible with WiFi V2.0 for SolaX Cloud monitoring WiFi stick required for remote monitoring Installation Notes For G100 applications, a software update is recommended Recommended use with SolaX CHINT three-phase CT energy meter Collections are not permitted due to health & safety regulations Technical Specifications AC Attributes Max power: 8,800 W Max current: 12.9 A Number of phases: 3 System Max efficiency: 98% IP rating: IP65 Dimensions & Weight Dimensions (H x W x D): 503 x 503 x 199 mm Weight: 30 kg