All products
Aiko
Air Source Heat Pumps
Air Source Heat Pumps Packages
All Black Solar Panlels
Alpha Battery Storage Range
Battery Storage
Best Selling Products
BiFacial Solar Panels
Build a PV kit
Bulk Deals
Buying Home Battery Storage has never been so simple - Installed Packages
Canadian Solar
Commercial Battery Storage Systems
Design & Installations
Duracell
Electric Boilers
Electric Car Chargers
Energy Saving & Accessory Products
Enphase IQ All in One
Enphase Micro Inverters
Eurener Solar Panels
Flexible & semi-flexible solar panels
Fox ESS Low Voltage
Fox ESS Solar Inverters
FOX HIGH VOLTAGE
Full Range of Solar Inverters
GivEnergy Battery Storage
Givenergy EV Car Charger
Growatt 6.5KWH Battery
Growatt AC-Coupled Inverter
Growatt Battery Storage
Growatt GBLI6532
Growatt Inverter 5KW Battery
Growatt Monitoring System
Growatt Solar Inverters
GSL Energy All In One
Hot Water All In One ASHP
Huawei Battery Storage
Huawei Optimisers
Hybrid Inverters / Battery Chargers
Hyundai Solar Panels
ICS
Infrared heating
JA Solar Panels
Jinko Solar Panel
Libbi All In One Home Battery Storage
Longi Solar Panels
Lower delivery cost available specifically for solar panels on this page from 1-4 panels
Most Popular
Mounting Options
Newest Products
Pylontech Battery
QCells Solar Panels
REC Solar panels
SMA Solar Inverters
SoFar Solar Inverters
Solar & Battery Storage Kits
Solar Accessories
Solar Panel Full Range
Solar Thermal
SolarEdge
SolarEdge Battery Storage
SolarEdge Optimisers
SolarEdge Optimizers / Enphase Micro-inverters International
SolarEdge Smart Solar Panel
Solax Battery Storage Range
Solax Inverters
Solis Solar Inverters
Special Offers
Sunpower Solar Panels
Sunsynk On & Off grid battery Storage
Swimming Pool ASHP
Tigo Optimisers
Trina Solar panels
Victron Complete Kits
Victron Energy Range
Viridian In-Roof Integrated Panels
Warranties
4mm2 single-core DC solar cable 50m - Black £38 + VAT
£45.82 incl. VAT
4mm2 single-core DC solar cable 50m - Black
#1:CABLE4-1-50 Cables - DC Cables
4 mm², single-core, black, 50m NEW H1Z2Z2-K certified
50m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
4mm2 single-core DC cable 100m - Black £71 + VAT
£84.95 incl. VAT
4mm2 single-core DC cable 100m - Black
#1: CABLE4-1-100
4 mm², single-core, black, 100m NEW H1Z2Z2-K certified
100m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
As with the TƒœV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.
4mm2 single-core DC cable 250m - Black £158 + VAT
£190.08 incl. VAT
4mm2 single-core DC cable 250m - Black
#1: CABLE4-1-250
4 mm², single-core, black, 250m NEW H1Z2Z2-K certified
250m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
As with the TƒœV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.
4mm2 single-core DC cable 500m - Black £250 + VAT
£300.14 incl. VAT
4mm2 single-core DC cable 500m - Black
#1: CABLE4-1-500
4 mm², single-core, black, 500m NEW H1Z2Z2-K certified
500m solar cable with length label. Supplied on a reusable spool.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
As with the TƒœV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.
6mm2 single-core DC solar cable 50m - Black £50 +VAT
£59.89 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-50 Cables - DC Cables
APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. -Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216.
4mm2 single-core DC cable 1000m - Black £600 +VAT
£720.00 incl. VAT
4mm2 single-core DC cable 1000m - Black
#1: CABLE4-1-1000
4 mm², single-core, black, 1000m
1000m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 4 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
6mm2 single-core DC solar cable 100m - Black £107 + VAT
£128.72 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1: CABLE6-1-100 Cables - DC Cables
6 mm single-core, black, 100m
100m solar cable with length label
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to�1.5kV�between conductors as well as between conductor and earth, and not exceeding�1800V.�EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous T�V approved PV1-F cable.
6mm2 single-core DC solar cable 250m - Black £237 +VAT
£284.40 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-250 Cables - DC Cables
250m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTIONConductor Flexible tinned copper (Class 5)Insulation Halogen-free cross-linked compoundOutersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
6mm2 single-core DC solar cable 500m - Black £444 + VAT
£533.17 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-500 Cables - DC Cables
6 mm², single-core, black, 500m
500m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 6 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.
6mm2 single-core DC solar cable 1000m - Black £867 + VAT
£1,040.41 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-1000 Cables - DC Cables
6 mm², single-core, black, 1000m
500m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 6 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.
10mm2 single-core DC solar cable 100m - Black £172.50 + VAT
£207.00 incl. VAT
10mm2 single-core DC solar cable 100m - Black
#2: CABLE10-1-100
100m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 10 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
Current Transformer 500A (incl. fly lead ) (Solis 5G Compatible) £28 +VAT
£33.52 incl. VAT
Current Transformer 500A (incl. fly lead)
#1: CT-500A Display - Current Sensor Clamps
SCT36-500/5A Split Core Current Transformer
500A Current Transformer clamp
Frequency: 50-60Hz
Accuracy: ±1% between 20% - 120% Insulation voltage: 600V AC Maximum primary voltage: 5000V AC Dielectric strength: 2.5KV/1mA/1min Operating temperature: -15°C to +60°C Operating humidity: <85% Case material: PC / UL94-V0 Bobbin: PBT Core: Permalloy Internal structure: Epoxy
Split core Current Transformer ( incl. fly lead )
Part No as per datasheet: SCT36-500/5A
4mm2 Two Core DC Cable 25m - Red and Black £122 +VAT
£146.40 incl. VAT
4mm2 Two Core DC Cable 25m - Red and Black
#2: DC-PV-ULTRA2C4.0-25 Cables - DC Cables
PV-Ultra - Double Insulated Multicore DC Cable
The PV-Ultra cable is engineered for excellence in solar photovoltaic systems, offering a robust solution for DC interconnections. Its superior mechanical properties ensure it can be deployed both inside and outside, showcasing versatility. Made from premium materials, this cable is built to last, with an anticipated lifespan of up to 25 years. It is capable of functioning at a peak conductor temperature of 90°C, and can withstand temperatures up to 120°C for as long as 20,000 hours, in environments reaching up to 90°C. This durability and performance make the PV-Ultra an ideal choice for reliable, long-term solar installations.
Features and Benefits
Easier to handle and identify
Saves installation costs and installation time
Easier to route along/through buildings or walls
Gives a cleaner, neater installation
Safer as it removes the need for junction boxes
Safer as it looks like a power cable to reduces the risk of accidental damage
Pre-marked ‘LIVE DC’ warning message to improve safety
Current carrying capacities based on ambient temperature of 60°C , for temperatures above 60°C temperature derating factors should be applied as follows 70°C=0.91, 80°C=0.82, 90°C=0.71. Refer to BS7671 for further guidance.
Supplier Part No: PV-ULTRA2C4.0Weight: 8.37 kgLength: 25 mArea: 4 mm2Colour: Red and BlackCores: 2 - NMax Current: 52Max Voltage: 1,800
4mm2 Two Core DC Cable 50m - Red and Black £215 +vat
£258.00 incl. VAT
4mm2 Two Core DC Cable 50m - Red and Black
#2: DC-PV-ULTRA2C4.0-50 Cables - DC Cables
PV-Ultra - Double Insulated Multicore DC Cable
The PV-Ultra cable is engineered for excellence in solar photovoltaic systems, offering a robust solution for DC interconnections. Its superior mechanical properties ensure it can be deployed both inside and outside, showcasing versatility. Made from premium materials, this cable is built to last, with an anticipated lifespan of up to 25 years. It is capable of functioning at a peak conductor temperature of 90°C, and can withstand temperatures up to 120°C for as long as 20,000 hours, in environments reaching up to 90°C. This durability and performance make the PV-Ultra an ideal choice for reliable, long-term solar installations.
Features and Benefits
Easier to handle and identify
Saves installation costs and installation time
Easier to route along/through buildings or walls
Gives a cleaner, neater installation
Safer as it removes the need for junction boxes
Safer as it looks like a power cable to reduces the risk of accidental damage
Pre-marked ‘LIVE DC’ warning message to improve safety
Current carrying capacities based on ambient temperature of 60°C , for temperatures above 60°C temperature derating factors should be applied as follows 70°C=0.91, 80°C=0.82, 90°C=0.71. Refer to BS7671 for further guidance.
Supplier Part No: PV-ULTRA2C4.0.50MWeight: 16.75 kgLength: 50 mArea: 4 mm2Colour: Red and BlackCores: 2 - NMax Current: 52Max Voltage: 1,800
6mm2 Two Core DC Cable 25m - Red and Black £140 +vat
£168.00 incl. VAT
6mm2 Two Core DC Cable 25m - Red and Black
#2: DC-PV-ULTRA2C6.0-25
PV-Ultra - Double Insulated Multicore DC Cable
The PV-Ultra cable is engineered for excellence in solar photovoltaic systems, offering a robust solution for DC interconnections. Its superior mechanical properties ensure it can be deployed both inside and outside, showcasing versatility. Made from premium materials, this cable is built to last, with an anticipated lifespan of up to 25 years. It is capable of functioning at a peak conductor temperature of 90°C, and can withstand temperatures up to 120°C for as long as 20,000 hours, in environments reaching up to 90°C. This durability and performance make the PV-Ultra an ideal choice for reliable, long-term solar installations.
Features and Benefits
Easier to handle and identify
Saves installation costs and installation time
Easier to route along/through buildings or walls
Gives a cleaner, neater installation
Safer as it removes the need for junction boxes
Safer as it looks like a power cable to reduces the risk of accidental damage
Pre-marked ‘LIVE DC’ warning message to improve safety
Current carrying capacities based on ambient temperature of 60°C , for temperatures above 60°C temperature derating factors should be applied as follows 70°C=0.91, 80°C=0.82, 90°C=0.71. Refer to BS7671 for further guidance.
Supplier Part No: PV-ULTRA2C6.0.25MWeight: 10.12 kgLength: 25 mArea: 6 mm2Colour: Red and BlackCores: 2 - NMax Current: 67Max Voltage: 1,800
4mm2 Two Core DC Cable 100m - Red and Black £430 +VAT
£516.00 incl. VAT
4mm2 Two Core DC Cable 100m - Red and Black
#2: DC-PV-ULTRA2C4.0-100 Cables - DC Cables
PV-Ultra - Double Insulated Multicore DC Cable
The PV-Ultra cable is engineered for excellence in solar photovoltaic systems, offering a robust solution for DC interconnections. Its superior mechanical properties ensure it can be deployed both inside and outside, showcasing versatility. Made from premium materials, this cable is built to last, with an anticipated lifespan of up to 25 years. It is capable of functioning at a peak conductor temperature of 90°C, and can withstand temperatures up to 120°C for as long as 20,000 hours, in environments reaching up to 90°C. This durability and performance make the PV-Ultra an ideal choice for reliable, long-term solar installations.
Features and Benefits
Easier to handle and identify
Saves installation costs and installation time
Easier to route along/through buildings or walls
Gives a cleaner, neater installation
Safer as it removes the need for junction boxes
Safer as it looks like a power cable to reduces the risk of accidental damage
Pre-marked ‘LIVE DC’ warning message to improve safety
Current carrying capacities based on ambient temperature of 60°C , for temperatures above 60°C temperature derating factors should be applied as follows 70°C=0.91, 80°C=0.82, 90°C=0.71. Refer to BS7671 for further guidance.
Supplier Part No: PV-ULTRA2C4.0.100MWeight: 33.5 kgLength: 100 mArea: 4 mm2Colour: Red and BlackCores: 2 - NMax Current: 52Max Voltage: 1,800