Newest Products (865)

Zappi  Multiphase ev charger 7kw to 22kw tethered white #2: MYEN-ZAPPI-2H22TB-G EV Charging - EV Charger   Zappi  Data Sheet Zappi G quick installation manual Zappi G Installation Manual *Collections are not permitted due to health & safety regulations* 7-22kW Multiphase Eco-smart untethered EV Charger in White Charge your EV with your PV! Myenergi’s latest innovation, the zappi multiphase, brings flexible charging options to suit diverse needs. With selectable power settings of 7kW and 22kW, this charger adapts seamlessly to single or three-phase electrical setups, delivering efficient, high-speed charging tailored to every user’s setup. Multiphase Overview. Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Zappi G range now featuring  Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingFor use with 1-phase and 3-phase mains supplyOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warranty  Built in Wifi and ethernet socket, for connection to the internet (no Hub required)

Zappi EV Charger Multiphase   7kW to 22kW Untethered White #2:  EV Charging - EV Charger   Zappi 7kW - 22kW Product Compatibility Zappi Multiphase Zappi 7kW - 22kW User Manual Zappi 7kW - 22kW Installation Manual *Collections are not permitted due to health & safety regulations* Charge your EV with your PV! myenergi's latest innovation, the Zappi Multiphase has flexible charging options. Power settings range from 7kW to 22kW. This charger adapts to single or three-phase electrical setups. In Fast mode zappi operates like any other mains powered EV charger. Features Three charging modes: ECO, ECO+ and Fast. Front Lid Tamper Detection Compliant with UK Electric Vehicle (Smart Charge Points) Regulations Automatic Firmware Checking For use with 1-phase and 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved  Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage Warranty: 3 years

405W Maxeon Sunpower 6 All Black Solar panel #20: SPR-P6-405-BLK SunPower 405W Data Sheet SunPower 405W Manual SunPower 405W Warranty Minimum order for this panel: 1 panels. Delivery time for these panels: 3-4 business days, please ensure you select a date at checkout at least 3 days from ordering Note: These panels are not available to purchase as part of PV system, otherwise a separate pallet delivery will needs to be added for mounting.   Enhanced Power DensityWith high efficiency, LID-resistant solar cells (G12, 210mm), a lower temperature coefficient, and front-side conductive wires that support increased current collection, SunPower Performance panels are uniquely engineered to deliver more lifetime energy over standard solar panels. Proven ReliabilityA proprietary shingled-cell design maximises durability in all types of weather conditions—including reinforced cell connections that withstand the stresses of daily temperature swings, redundant electrical paths that alleviate the impact of cell cracks, and an advanced electrical architecture that is more resilient to the effects of shade and mitigates hot-spot formation.

Fox ESS AI Link - EMS Box for 3PH System #2: FE-AI-LINK Fox ESS AI Link Datasheet Fox ESS AI User Manual  Fox Battery Sizing Guide   Fox Smart Logger Communication Box Datasheet  The parallel function (installing multiple units on a single site).  Require an additional EMS. IP65 Rated Wide operating temperature Reliable and safe Highly compatible Weight: 2.5kg Dimensions:  260x192x88mm (w x h x d)  

GivEnergy Commercial SME AIO - High Voltage Box   #2: GIV-3U-HVB-ID Switches - DC Combiner Box   GivEnergy Commercial Product Brochure GivEnergy Commerical AIO Warranty GivEnergy Commercial SME AIO - High Voltage Box Weight: 100kg      

GivEnergy Commercial SME AIO 120A CT #2:  GIV-COM-CT-120 Display - Current Sensor Clamps  GivEnergy Commercial Product Brochure GivEnergy Commerical AIO Warranty Specs  Primary Rating: 12A Secondary Rating: 0.4A  Hole Dimensions: 36.1mm (outer width) / 15.7mm (inner width) Internal Height: 16.3mm   Overall Dimensions: 46.8mm x 32.3mm  (H x D) CT Clamp Information    Most CT clamps will be supplied as split core to enable easier fitment. CT clamps must be rated to the maximum current of the cable they are monitoring. In most cases this is the rating (A) of the protective device. For best accuracy, CT clamps should be sized as close as possible to the rated supply and fit the cable/bus bar as tightly as possible. Many other size options are available on request.    

600W JA Solar N-type Bifacial Double Glass Half-Cell MBB Traceable LB MC4 #2:JAM72D-40-600-LB-TS-MC4 JA Solar 600W Data Sheet JA Solar 600W Manual JA Solar 600W Warranty JA Solar 600W MCS Certificate Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Other panels have a minimum order of 3 - 5 panels. Due to the panel size and gap between the slats of the pallets either a fork lift truck is required on-site to offload these modules or they need to be hand lifted off by the customer. Collections are not permitted due to health & safety regulations Features Higher power generation - better LCOE N-Type with very low LID Better weak illumination response Better temperature coefficient Efficiency: 22.7% Warranty (Product/Performance): 12/25 years Specs Supplier Part No: JAM72D-40-600-LB-TS-MC4 Weight: 32.5 kg Rated Power: 600 W MCS Reference: BABT 8515-341-600W Width: 1,134 mm Depth: 30 mm Length: 2,333 mm VMPP: 43.76 V IMPP: 13.71 A Isc: 14.48 A Voc: 52.4 V Temp. Coefficient (Mpp): -0.3 % Clamp position on panel: Long and short side Connector Type: Round Post Pallet Size: Oversized Please note:Due to size of the panels and size of gap between the slats of the pallets a fork lift truck on site is required to offload these modules.   

Fox EQ HV EQ4800-L2, 9.32kWh 1x Master 1x Slave #2: FE-HV-EQ-2-4.8-9.6 Storage Systems - Li-ion Battery Pack Fox's  EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 2 (9.32kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 1 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 83,5 kg Rated Power: 4,800 W Battery Type: Lithium Ion Nominal Energy: 9,320 Wh Depth of discharge: 90.00 % Voltage: 89 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 386 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L3, 13.98kWh 1x Master 1x Slave #2: FE-HV-EQ-3-4.8-14.4 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 3 (13.98kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 2 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 125,5 kg Battery Type: Lithium Ion Nominal Energy: 13,980 Wh Depth of discharge: 90.00 % Voltage: 134 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 524 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L4, 18.64kWh 1x Master 3x Slave #2:  FE-HV-EQ-4-4.8-19.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 4 (18.64kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 3 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 166,5 kg Battery Type: Lithium Ion Nominal Energy: 18,640 Wh Depth of discharge: 90.00 % Voltage: 179 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 622 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L5, 23.3kWh 1x Master 4x Slave #2:  FE-HV-EQ-5-4.8-24.0  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 5 (23.3kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 4 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 208 kg Battery Type: Lithium Ion Nominal Energy: 23,300 Wh Depth of discharge: 90.00 % Voltage: 224 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 800 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L6, 27.96kWh 1x Master 5x Slave #2:  FE-HV-EQ-6-4.8-28.8 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 6 (27.96kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 5 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 249.5 kg Battery Type: Lithium Ion Nominal Energy: 27,960 Wh Depth of discharge: 90.00 % Voltage: 268 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 938 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L7, 32.61kWh 1x Master 6x Slave #2:   FE-HV-EQ-7-4.8-33.6 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 7 (32.61kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 6 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 291 kg Battery Type: Lithium Ion Nominal Energy: 32,610 Wh Depth of discharge: 90.00 % Voltage: 313 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1067 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer in Swindon with space for 6 x 480W Jinko panels on his outbuilding and opted forSolis 3kw Hybrid with the Dyness 5.12kWh battery   System spec: 6 x 480w Jinko Tiger Neo All Black Solis 3kW Hybrid Dyness 5.12kWh battery  

Fox EQ HV EQ4800-L8, 37.27kWh 1x Master 7x Slave #2:  FE-HV-EQ-8-4.8-38.4  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 7 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 332.5 kg Battery Type: Lithium Ion Nominal Energy: 37,270 Wh Depth of discharge: 90.00 % Voltage: 583 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1241 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L9, 41.93kWh 1x Master 8x Slave #2:  FE-HV-EQ-9-4.8-43.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 8 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 374 kg Battery Type: Lithium Ion Nominal Energy: 41,930 Wh Depth of discharge: 90.00 % Voltage: 403 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1352 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.