Newest Products (876)

600W JA Solar N-type Bifacial Double Glass Half-Cell MBB Traceable LB MC4 #2:JAM72D-40-600-LB-TS-MC4 JA Solar 600W Data Sheet JA Solar 600W Manual JA Solar 600W Warranty JA Solar 600W MCS Certificate Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Other panels have a minimum order of 3 - 5 panels. Due to the panel size and gap between the slats of the pallets either a fork lift truck is required on-site to offload these modules or they need to be hand lifted off by the customer. Collections are not permitted due to health & safety regulations Features Higher power generation - better LCOE N-Type with very low LID Better weak illumination response Better temperature coefficient Efficiency: 22.7% Warranty (Product/Performance): 12/25 years Specs Supplier Part No: JAM72D-40-600-LB-TS-MC4 Weight: 32.5 kg Rated Power: 600 W MCS Reference: BABT 8515-341-600W Width: 1,134 mm Depth: 30 mm Length: 2,333 mm VMPP: 43.76 V IMPP: 13.71 A Isc: 14.48 A Voc: 52.4 V Temp. Coefficient (Mpp): -0.3 % Clamp position on panel: Long and short side Connector Type: Round Post Pallet Size: Oversized Please note:Due to size of the panels and size of gap between the slats of the pallets a fork lift truck on site is required to offload these modules.   

Fox EQ HV EQ4800-L2, 9.32kWh 1x Master 1x Slave #2: FE-HV-EQ-2-4.8-9.6 Storage Systems - Li-ion Battery Pack Fox's  EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 2 (9.32kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 1 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 83,5 kg Rated Power: 4,800 W Battery Type: Lithium Ion Nominal Energy: 9,320 Wh Depth of discharge: 90.00 % Voltage: 89 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 386 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L3, 13.98kWh 1x Master 1x Slave #2: FE-HV-EQ-3-4.8-14.4 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 3 (13.98kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 2 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 125,5 kg Battery Type: Lithium Ion Nominal Energy: 13,980 Wh Depth of discharge: 90.00 % Voltage: 134 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 524 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L4, 18.64kWh 1x Master 3x Slave #2:  FE-HV-EQ-4-4.8-19.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 4 (18.64kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 3 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 166,5 kg Battery Type: Lithium Ion Nominal Energy: 18,640 Wh Depth of discharge: 90.00 % Voltage: 179 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 622 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L5, 23.3kWh 1x Master 4x Slave #2:  FE-HV-EQ-5-4.8-24.0  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 5 (23.3kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 4 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 208 kg Battery Type: Lithium Ion Nominal Energy: 23,300 Wh Depth of discharge: 90.00 % Voltage: 224 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 800 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L6, 27.96kWh 1x Master 5x Slave #2:  FE-HV-EQ-6-4.8-28.8 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 6 (27.96kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 5 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 249.5 kg Battery Type: Lithium Ion Nominal Energy: 27,960 Wh Depth of discharge: 90.00 % Voltage: 268 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 938 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L7, 32.61kWh 1x Master 6x Slave #2:   FE-HV-EQ-7-4.8-33.6 Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 7 (32.61kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 6 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 291 kg Battery Type: Lithium Ion Nominal Energy: 32,610 Wh Depth of discharge: 90.00 % Voltage: 313 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1067 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer in Swindon with space for 6 x 480W Jinko panels on his outbuilding and opted forSolis 3kw Hybrid with the Dyness 5.12kWh battery   System spec: 6 x 480w Jinko Tiger Neo All Black Solis 3kW Hybrid Dyness 5.12kWh battery  

Fox EQ HV EQ4800-L8, 37.27kWh 1x Master 7x Slave #2:  FE-HV-EQ-8-4.8-38.4  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 7 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 332.5 kg Battery Type: Lithium Ion Nominal Energy: 37,270 Wh Depth of discharge: 90.00 % Voltage: 583 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1241 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L9, 41.93kWh 1x Master 8x Slave #2:  FE-HV-EQ-9-4.8-43.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 8 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 374 kg Battery Type: Lithium Ion Nominal Energy: 41,930 Wh Depth of discharge: 90.00 % Voltage: 403 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1352 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

GivEnergy Commercial SME AIO 120kW 276kWh - inc EMS and Meter #2: GIV-SME-AIO-120-276 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  36 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 4 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 4 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 2,248.2kg Max Efficiency: 98.8% Nominal Energy: 274680 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 122320 W Maximum Discharge Rate (5 Minutes): 122320 W Surge Discharge Rate (5 Minutes): 122320 W Maximum Charge Rate (5 Minutes): 122320 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 150kW 345kWh - inc EMS and Meter #2: GIV-SME-AIO-150-345 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  45 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 5 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 5 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 2,790.2 kg Max Efficiency: 90% Nominal Energy: 345600 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 152900 W Maximum Discharge Rate (5 Minutes): 152900 W Surge Discharge Rate (5 Minutes): 152900 W Maximum Charge Rate (5 Minutes): 152900 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 180kW 414kWh - inc EMS and Meter #2: GIV-SME-AIO-180-414 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  54 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 6 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 6 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 3,332.2kg Max Efficiency: 90% Nominal Energy: 414720 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 183480 W Maximum Discharge Rate (5 Minutes): 183480 W Surge Discharge Rate (5 Minutes): 183480 W Maximum Charge Rate (5 Minutes): 1834830 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 30kW 69kWh - inc EMS and Meter #2:  GIV-SME-AIO-30-69 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  9 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 1 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 6 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 622.2kg Max Efficiency: 90% Nominal Energy: 69120 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 30580 W Maximum Discharge Rate (5 Minutes): 30580 W Surge Discharge Rate (5 Minutes): 30580 W Maximum Charge Rate (5 Minutes): 30580 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 60kW 138kWh - inc EMS and Meter #2:  GIV-SME-AIO-60-138 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  18 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 2 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 2 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 1,162.2kg Max Efficiency: 90% Nominal Energy: 138240 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 61160 W Maximum Discharge Rate (5 Minutes): 61160 W Surge Discharge Rate (5 Minutes): 61160 W Maximum Charge Rate (5 Minutes): 61160 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

Nationwide installations are available across most areas of the UK. £750 deposit refundable to proceed with the installation process. Balance payment due prior to delivery of the system (ignore the date that will show at checkout which is only an estimate) Installation service includes DNO application, MCS & 2yr workmanship warranty. Free delivery included at checkout so VAT isn't charged on delivery. Steps to Proceed following payment of the deposit: Provide your MPAN Number found on your electricity bill Photo's of the space for the battery system with a description of the location Photo's of the consumer unit with description of location of consumer unit in relation to the location for the battery system. Photo's of a current solar inverter set up if relevant.    #5: INSTALLED-GIV-HV Storage Systems - Hybrid Inverter GivEnergy HV Li-ion Battery Stack Datasheet GivEnergy  HV Li-ion Installation Manual GivEnergy 1PH Hybrid HV Gen 3 Datasheet GivEnergy 1PH Hybrid HV Gen 3 Installation Manual GivEnergy Product Warranty Please view our battery storage information page for sizing and selecting the right battery storage system for you. Collections are not permitted due to health & safety regulations Hybrid Features GivEnergy's third generation Hybrid Inverter range can be coupled directly with solar panels to generate usable electricity as well as store excess energy for later use. Excess energy is stored in the battery for later use. In addition it minimizes importing of energy by discharging appropriately to meet demand.  Compatible with GivEnergy HV Storage - High Voltage Batteries but not compatible with the LV battery range earth bonding kit is required with every Gen 3 inverter  GIV-PE-KIT-G3 Features In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty 8kw Specs:  Weight: 32 kg Rated Power: 8,000 W Min PPT Voltage: 90 V Max PPT Voltage: 550 V DC Startup Voltage: 80 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 12,000 W Max DC Current: 50 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity: 2 Has Integrated DC Switch: No    Battery Features: Battery Type: Lithium iron phosphate (LFP)Capacity: 13.6.kWh Nominal Voltage: 307 V DCOperating Voltage Range: 200-600 V Up to 5 stacks possible on an inverterWarranty: 12 years Specs: Max Charge/Discharge Current: 25/25 ADepth of Discharge (DoD): 100 % Life cycles: Unlimited within the 12 year warranty C Rating: 0.5C No other accessories required other than the BMS Communication: CAN BUS Compatibility: Inverter connection for 3PH Hybrid (GIV Hybrid Inverter only)