Products – Page 55 – ITS Technologies

image victron Quattro 48/15000/200-100/100 230V VE.Bus

Victron Quattro 48/15000/200-100/100 230V VE.Bus £2,266.00 + VAT

Victron Quattro 48/15000/200-100/100 230V VE.Bus #17: Victron Quattro 48/15000/200-100/100 230V VE.Bus (48V - 200A Charger) Quattro 48 Data Sheet Quattro 48 Manual The 15kVA Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems. The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc. Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Specifications: DC Input: 38-66V (48V) Continuous Output Power: 15,000VA (12,000W) Peak Power: 25,000W Maximum Efficiency: 96% Zero-Load Power: 110W AC Input: 187-265VAC 45-65HZ Max Charge Current: 200A AC Transfer Relay: 2 x 100A Dimensions: 572 x 488 x 344 mm Weight: 72kg Warranty: 5 years Available in 48V models only.

Victron SmartShunt 1000A/50mV battery monitor

Victron SmartShunt 1000A/50mV £124.00 + VAT

Victron SmartShunt 1000A/50mV #17: Victron SmartShunt 1000A/50mV (SmartShunt Only) Victron SmartShunt 1000A/50mV Datasheet The SmartShunt is an all-in-one battery monitor, only without a display: your smartphone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone or tablet and you can conveniently read all monitored battery parameters, like state of charge, time to go, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. It is equipped with Bluetooth, a VE.Direct port, and a connection that can be used for monitoring a second battery, midpoint monitoring, or a temperature sensor.The SmartShunt is available in 500A, 1000A, 2000A and 6000A versions.Have a Solar System? See these settings for optimal operation.

Wall-mounted installation package with cables for Pelio-L-5.12

Wall-Mounted Installation Package With Cable for Pelio-L-5.12 £133.00 + VAT

Wall-Mounted Installation Package With Cable for Pelio-L-5.12 #2: PYL-PELIO-WALL-MOUNT Storage Systems - Accessory Wall Mounting Installation Kit for the Pylontech Pelio-L-5.12 LV Battery Module Pelio 5.12 Wall Mounted Kit Packing List This wall mounting kit includes: 1 x PELIO- left bracket 1 x PELIO- right bracket 1 x PELIO- Base 1 x PELIO-1.2 mcable /4AWG positive 1 x PELIO-1.2 mcable /4AWG negative 1 x PELIO-2.5 m RS485 communication cable/RJ45 1 x PELIO-2.5 m CAN communication cable/RJ45 2 x Communication port 1 x PELIO grounding cable 2 x PELIO- anti-tipping bracket 2 x TS51100-Pelio/outlet bracket 2 x Screw /M5Ã—12 4 x Screw /M4Ã—6 4 x Screw /M6X16 8 x Expansion screw/M8x60 4 x TSP120-R- waterproof cover 2 x PELIO- handle baffle 10 x Nylon countersunk head screw/ M5Ã—10 1 x WIFI block

Durable 200cm weather protection canopy for batteries

Weather protection Canopy for Batteries or Inverters: 200cm Wide £61.39 + VAT

Weather protection Canopy for Batteries or Inverters #2: OTS-CANOPY-200CM Accessories - Weather Protection Outsunny Canopy Data Sheet Outsunny User Manual Protect your outdoor units from harmful rays, glaring sun and light-medium rain Features B70-051 WEATHER-RESISTANT: Protect outdoor installed units such as Inverters or Batteries from glaring sun and light-medium rain, UV RESISTANT: Shields outdoor unit against harmful rays and glaring sun thanks to the surface coating. SIMPLE DESIGN: Suitable for all home and outdoors area main unit installations ACCESSORIES INCLUDED: All necessary hardware included. For fitting on cement walls only. DIMENSIONS: 23H x 200L x 80Wcm. Wall bracket: 23H x 75Lcm.

z brackets for flat surface solar panels

install diagram for z bracket for solar panel

items included for z bracket installation of solar panels

Z Bracket for all size solar panel flat surface installation 4PCS (1 panel) £12.50 + VAT

Z Bracket for solar panel flat surface installation 4PCS (1 panel) #12: 002024 Minimum order - 4 Delivery time - 5 days 4 PCS Solar Panel Bracket, Solar Panel Mounting Bracket Aluminum Alloy Module Z Bracket Holder Stand with stainless steel, Nuts and Screws for RV Boat Wall Caravans Yacht Off-Gird Roof Installation (Silver) Stainless steel, anti corrosive screws, warranty this product for 10 years! The nuts, bolts and other hardware are solid stainless steel. The brackets are made from 2mm aluminium. For solar panels up to 300W a set of 4 mounting accessories is required but for larger modules it is recommended to use at least 6 brackets. Content: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts

Zappi Multiphase ev charger 7kw to 22kw tethered black £650.00 + VAT

Zappi Multiphase ev charger 7kw to 22kw tethered black #2: MYEN-ZAPPI-2H22TB-G EV Charging - EV Charger Zappi Data Sheet Zappi G quick installation manual Zappi G Installation Manual *Collections are not permitted due to health & safety regulations* 7-22kW Multiphase Eco-smart untethered EV Charger in Black Charge your EV with your PV! Myenergi’s latest innovation, the zappi multiphase, brings flexible charging options to suit diverse needs. With selectable power settings of 7kW and 22kW, this charger adapts seamlessly to single or three-phase electrical setups, delivering efficient, high-speed charging tailored to every user’s setup. Multiphase Overview. Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Zappi G range now featuring Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingFor use with 1-phase and 3-phase mains supplyOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warranty Built in Wifi and ethernet socket, for connection to the internet (no Hub required)

Zappi Multiphase ev charger 7kw to 22kw tethered white

Zappi Multiphase ev charger 7kw to 22kw tethered white £650.00 + VAT

Zappi Multiphase ev charger 7kw to 22kw tethered white #2: MYEN-ZAPPI-2H22TB-G EV Charging - EV Charger Zappi Data Sheet Zappi G quick installation manual Zappi G Installation Manual *Collections are not permitted due to health & safety regulations* 7-22kW Multiphase Eco-smart untethered EV Charger in White Charge your EV with your PV! Myenergi’s latest innovation, the zappi multiphase, brings flexible charging options to suit diverse needs. With selectable power settings of 7kW and 22kW, this charger adapts seamlessly to single or three-phase electrical setups, delivering efficient, high-speed charging tailored to every user’s setup. Multiphase Overview. Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. Zappi G range now featuring Front Lid Tamper DetectionCompliant with UK Electric Vehicle (Smart Charge Points) RegulationsAutomatic Firmware CheckingFor use with 1-phase and 3-phase mains supplyOptimises microgeneration self-consumptionWorks with solar PV or wind turbine systemsEconomy tariff sense inputDynamic load balancingCharge and event loggingPIN code lock functionOLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod requiredWorks alongside battery storage3 year warranty Built in Wifi and ethernet socket, for connection to the internet (no Hub required)

Zappi EV Charger Multiphase 7kW to 22kW Untethered Black

Zappi EV Charger Multiphase 7kW to 22kW Untethered Black £655.00 + VAT

Zappi EV Charger Multiphase 7kW to 22kW Untethered White #2: EV Charging - EV Charger Zappi 7kW - 22kW Product Compatibility Zappi Multiphase Zappi 7kW - 22kW User Manual Zappi 7kW - 22kW Installation Manual *Collections are not permitted due to health & safety regulations* Charge your EV with your PV! myenergi's latest innovation, the Zappi Multiphase has flexible charging options. Power settings range from 7kW to 22kW. This charger adapts to single or three-phase electrical setups. In Fast mode zappi operates like any other mains powered EV charger. Features Three charging modes: ECO, ECO+ and Fast. Front Lid Tamper Detection Compliant with UK Electric Vehicle (Smart Charge Points) Regulations Automatic Firmware Checking For use with 1-phase and 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage Warranty: 3 years

Zappi EV Charger Multiphase 7kW to 22kW Untethered White £655.00 + VAT

Zappi EV Charger Multiphase 7kW to 22kW Untethered White #2: EV Charging - EV Charger Zappi 7kW - 22kW Product Compatibility Zappi Multiphase Zappi 7kW - 22kW User Manual Zappi 7kW - 22kW Installation Manual *Collections are not permitted due to health & safety regulations* Charge your EV with your PV! myenergi's latest innovation, the Zappi Multiphase has flexible charging options. Power settings range from 7kW to 22kW. This charger adapts to single or three-phase electrical setups. In Fast mode zappi operates like any other mains powered EV charger. Features Three charging modes: ECO, ECO+ and Fast. Front Lid Tamper Detection Compliant with UK Electric Vehicle (Smart Charge Points) Regulations Automatic Firmware Checking For use with 1-phase and 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage Warranty: 3 years

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered Black

Zappi EV Car charge point V2 - 22kW 3ph - Type 2 Tethered - White Ecosmart - I.T.S Technologies

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered Black £753.15 + VAT

Zappi Eco-smart EV Charge Point with WiFi 22kW 3PH Type 2 Tethered Black#2: MYEN-ZAPPI-2H22TB New version with tamper kit for new UK regulationsTo be OLEV Smart compliant an additional hub is required. Zappi 22kw 3ph Data Sheet Zappi 22kw 3ph User Manual Zappi Declaration of Conformity *Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White - ITS Technologies

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White £675.00 + VAT

Zappi 22kW Eco-smart EV Charge Point with WiFi 3PH Type 2 Tethered White#2: MYEN-ZAPPI-2H22TW #3: 4325#4832 #4: MY-122110 Zappi Type 2 Data Sheet Zappi Type 2 User Manual Zappi Type 2 Declaration of Conformity To be OLEV Smart compliant an additional hub is required.Collections are not permitted due to health & safety regulations For energy harvesting wireless sensor: Myenergi Harvi 22kW Eco-smart untethered EV Charger in Black Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty

Find anything you need

Products (875)

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts

ITS Technologies

ITS Technologies