20.4kWh HV Li-Ion Battery Stack - Including BMU Cable and Base #2: GIV-BAT-20.4-HV Storage Systems - Li-ion Battery Pack GivEnergy 20.4kWh HV Li-ion Battery Stack Datasheet GivEnergy 20.4kWh HV Li-ion Installation Manual  GivEnergy 20.4Wh HV Li-ion Battery Warranty  GivEnergy Battery Cable Compatibility Chart This item includes: 6 x GIV-BAT-3.4-HV GivEnergy 3.4kWh High Voltage Li-Ion Battery 1 x GIV-BAT-HV-BMU High Voltage Battery BMU Cable and Base Features: Battery Type: Lithium iron phosphate (LFP)Capacity: 20.4kWh Nominal Voltage: 460 V DCOperating Voltage Range: 200-600 V Up to 5 stacks possible on an inverter Warranty: 12 years Specs: Max Charge/Discharge Current: 25/25 ADepth of Discharge (DoD): 100 % Life cycles: Unlimited within the 12 year warranty C Rating: 0.5C No other accessories required other than the BMS Communication: CAN BUS Compatibility: Inverter connection for 1 & 3PH Hybrid (GIV Hybrid Inverter only)

Commercial Battery Storage kit: 3 X Sunsynk ECCO 8Kw Hybrid 61.44kwh Storage 1ph or 3ph #1:3XSUN-8.0-ECCO-GSLX6  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Commercial battery storage system suitable for either single phase or 3 phase systems. Comprised of 3 x 8kw single phase hybrids allowing up to 5kwh charge/discharge rate per hybrid inverter. This can be increased by utilising a busbar on each stack of batteries allowing the full charge & discharge of 8kwh per hybrid inverter. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per  hybrid inverter equating to 245.76kwh for systems with 3 hybrid inverters. Multiple hybrid inverters can also be installed per phase to expand further. Up to 10.4kw of solar or wind turbine can be installed per hybrid inverter. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 3 X Sunsynk ECCO 8Kw Hybrid 122.88kwh Storage 1ph or 3ph #1:3XSUN-8.0-ECCO-GSLX12  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Commercial battery storage system suitable for either single phase or 3 phase systems. Comprised of 3 x 8kw single phase hybrids allowing up to 5kwh charge/discharge rate per hybrid inverter. This can be increased by utilising a busbar on each stack of batteries allowing the full charge & discharge of 8kwh per hybrid inverter. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per hybrid inverter equating to 245.76kwh for systems with 3 hybrid inverters. Multiple hybrid inverters can also be installed per phase to expand further. Up to 10.4kw of solar or wind turbine can be installed per hybrid inverter. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 6 X Sunsynk ECCO 8Kw Hybrid 122.88kwh Storage 1ph or 3ph #1:3XSUN-8.0-ECCO-GSLX12  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Commercial battery storage system suitable for either single phase or 3 phase systems. Comprised of 6 x 8kw single phase hybrids allowing up to 5kwh charge/discharge rate per hybrid inverter. This can be increased by utilising a busbar on each stack of batteries allowing the full charge & discharge of 8kwh per hybrid inverter. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per  hybrid inverter equating to 245.76kwh for systems with 3 hybrid inverters. Multiple hybrid inverters can also be installed per phase to expand further. Up to 10.4kw of solar or wind turbine can be installed per hybrid inverter. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 2 X Sunsynk ECCO 10Kw 3ph Hybrid 81.92kwh Storage, up to 26kw of solar/wind #1:2XSUN-103PH-GSLX8  Sunsynk 3ph Data Sheet  Sunsynk 3ph Manual Commercial battery storage system suitable for 3 phase systems. Comprised of 2 x 10kw 3PH hybrids allowing up to 10kwh charge/discharge rate per hybrid inverter by use of a busbar on each stack of batteries. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per  hybrid inverter and up to 4 hybrid inverters equating to 327kwh for systems with 4 hybrid inverters.  Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 10kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 3 X Sunsynk ECCO 10Kw 3ph Hybrid 122.88kwh Storage, up to 39kw of solar/wind #1:3XSUN-103PH-GSLX12  Sunsynk 3ph Data Sheet  Sunsynk 3ph Manual Commercial battery storage system suitable for 3 phase systems. Comprised of 3 x 10kw 3PH hybrids allowing up to 10kwh charge/discharge rate per hybrid inverter by use of a busbar on each stack of batteries. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per  hybrid inverter and up to 4 hybrid inverters equating to 327kwh for systems with 4 hybrid inverters.  Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 10kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 4 X Sunsynk ECCO 10Kw 3ph Hybrid 163.84kwh Storage, up to 52kw of solar/wind #1:4XSUN-103PH-GSLX16  Sunsynk 3ph Data Sheet  Sunsynk 3ph Manual Commercial battery storage system suitable for 3 phase systems. Comprised of 4 x 10kw 3PH hybrids allowing up to 10kwh charge/discharge rate per hybrid inverter by use of a busbar on each stack of batteries. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per  hybrid inverter and up to 4 hybrid inverters equating to 327kwh for systems with 4 hybrid inverters.  Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 10kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 4 X Sunsynk ECCO 10Kw 3ph Hybrid 327.68kwh Storage, up to 52kw of solar/wind #1:4XSUN-103PH-GSLX32  Sunsynk 3ph Data Sheet  Sunsynk 3ph Manual Commercial battery storage system suitable for 3 phase systems. Comprised of 4 x 10kw 3PH hybrids allowing up to 10kwh charge/discharge rate per hybrid inverter by use of a busbar on each stack of batteries. The system is the maximum for the 3ph hybrids including 2 stacks of 4 x 10.24kwh batteries on all 4 hybrid inverters with 327kwh of storage. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 10kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 6 X Sunsynk ECCO 8Kw Hybrid 122.88kwh Storage 1ph or 3ph #1:9XSUN-8.0-ECCO-GSLX18  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Commercial battery storage system suitable for either single phase or 3 phase systems. Comprised of 9 x 8kw single phase hybrids allowing up to 5kwh charge/discharge rate per hybrid inverter. This can be increased by utilising a busbar on each stack of batteries allowing the full charge & discharge of 8kwh per hybrid inverter. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per hybrid inverter equating to 737kwh. Additional hybrid inverters can also be installed per phase to expand further. Up to 10.4kw of solar or wind turbine can be installed per hybrid inverter. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Commercial Battery Storage kit: 9 X Sunsynk ECCO 8Kw Hybrid 368.64kwh Storage 1ph or 3ph #1:9XSUN-8.0-ECCO-GSLX36  Sunsynk 8Kw Data Sheet  Sunsynk 8Kw Installation Manual  Sunsynk 8Kw Warranty  Sunsynk 8Kw G99 Certificate Commercial battery storage system suitable for either single phase or 3 phase systems. Comprised of 9 x 8kw single phase hybrids allowing up to 5kwh charge/discharge rate per hybrid inverter. This can be increased by utilising a busbar on each stack of batteries allowing the full charge & discharge of 8kwh per hybrid inverter. The system can be expanded to a maximum of 2 stacks of 4 x 10.24kwh batteries per hybrid inverter equating to 737kwh. Additional hybrid inverters can also be installed per phase to expand further. Up to 10.4kw of solar or wind turbine can be installed per hybrid inverter. Sunsynk hybrids have the API to connect to Octopus Agile & Flux to buy electricity at cheap rates and even sell back to the national grid at high rates through SEG payments. The Sunsynk 8kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. Product FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionUp to 16 units with the same firmware can be paralleledEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Sunsynk-8.8-K-SG01LP1 ECCOWeight: 25 kgRated Power: 8,000 WMin PPT Voltage: 125 VMax PPT Voltage: 425 VDC Startup Voltage: 150 VDC Shutdown Voltage: 150 VMax Input Voltage: 500 VMax DC Power: 10,400 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 44 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 0Euro Efficiency:96.5 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: Yes GSL 10.24kwh battery  Product Performance 1.  Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2.  LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3.  Compatible to mains voltage or generator power, auto restart while AC is recovering. 4.  Users can flexibly match battery capacity, standard battery packages or external batteries. 5.  It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6.  Integrated design, Easy transportation and installation. 7.  Overload/Over temperature/short circuit protection. 9.  Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries. Product Features                                                        - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.  Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

Fox ECS HV ECM2900 Connector Type A, 5.76kWh 1x Master 1x Slave #1: FE-HV-EC-A-2-2.9-5.8  Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Fox ECS2900 Datasheet  Fox ECS2900 Manual  Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 1 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage  Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A, 8.64kWh 1x Master 2x Slave #1:FE-HV-EC-A-3-2.9-8.7  Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Fox ECS2900 Datasheet  Fox ECS2900 Manual  Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 2 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage  Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A,11.52kWh 1x Master 3x Slave #1:FE-HV-EC-A-4-2.9-11.6 Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Fox ECS2900 Datasheet  Fox ECS2900 Manual  Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 3 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage  Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A,14.4kWh 1x Master 4x Slave #1:FE-HV-EC-A-5-2.9-14.5 Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Fox ECS2900 Datasheet  Fox ECS2900 Manual  Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 4 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage  Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A, 20.16kWh 1x Master 6x Slave #1:FE-HV-EC-A-7-2.9-20.3 Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Fox ECS2900 Datasheet  Fox ECS2900 Manual  Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 5 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage  Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

GivEnergy 3PH 11kW Hybrid Inverter#2: GIV-3HY-11.0-HV Storage Systems - Hybrid 3Phase Inverter GivEnergy 3PH 11kW Hybrid Inverter Datasheet GivEnergy 3.PH 11kW Hybrid Inverter Installation Manual GivEnergy Portal Brochure  GivEnergy App Brochure *Collections are not permitted due to health & safety regulations* This  GivEnergy Hybrid Inverter, designed for three-phase systems, functions as both a battery and solar inverter within a single unit enabling AC and DC coupling of the battery. This integrated system connects with solar panels for immediate electricity generation, with surplus energy stored in the battery for future use. Features: Plug-and-play installationOn/off-grid phase balancingDischarge up to 11kW Phases: 3MPP Tracker: 2Inputs per Tracker: 1Rated AC power: 11 kWMPPT Voltage range: 200 - 850 VWarranty: 12 years  Battery Compatibility: Battery connection for high-voltage battery (GivEnergy Battery only)  Connectivity: WiFi included  Meter: 3-PH smart meter not included Specs:  Weight: 35 kgRated Power:11,000 WMin PPT Voltage:200 VMax PPT Voltage:850 VDC Startup Voltage:200 VDC Shutdown Voltage:200 VMax Input Voltage:1,000 VMax DC Power:30,000 WMax AC Power (5 Minutes):15,000 WSurge AC Power (1 Second):15,000 WMax DC Current:30 AMax DC Inputs:2Has DC Fuses:0Connector:MC4  Included Connectors:0Euro Efficiency:97 %Transformer:NoneMPPT Quantity :2Has Integrated DC Switch:NoEPS: 11 kW Emergency Power Supply Input current: 15 AShort-circuit input current: 20 A