Victron Energy Range (22)

Victron | LiFePO4 Battery | 12.8V/180Ah Smart #20: BAT512118610 Victron 12.8V Smart Battery Data Sheet Victron 12.8v Smart Battery Manual  To view our full range of Victron products visit our main Victron page here The Victron LiFePO4 Battery 12.8V/180Ah Smart Victron's small Lithium battery range is perfect for small off grid set-ups. This range weighs 70% less and 70% smaller than Lead acid batteries. Victron's Lithium Iron Phosphate (LiFePO4) 12.8V/180Ah smart batteries can be connected in series or parallel. A battery bank can be built for system voltages of 12 V, 24 V or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84kWh in a 12V system. The 12.8V battery consists of 4 cells connected in series. Features No need to fully recharge - LFP superior to lead acid  High efficiency 92% Excellent cycling performance Integrated cell balancing Low internal resistance Compact design and lightweight Wireless monitoring via the Victron Connect App Six tailored BMS solutions Wide operating temperature range Warranty: 5 years (extendable to 10 years) Specs Weight: 18 kg Nominal voltage: 12,8V Maximum Discharge: 360A Recommended Continuous Discharge: <180A Maximum Charge: 320A Recommend Charge Current: <90A Internal Resistance: 0.9mΩ Mounting: Can be placed on their sides Power Connection: M8 Dimensions: 237 x 321 x 152 mm Compatible BMS:

Victron | LiFePO4 Battery | 12.8V/200Ah Smart #20: BAT512120610 Victron 12.8V Smart Battery Data Sheet Victron 12.8v Smart Battery Manual Victron BMS Overview To view our full range of Victron products visit our main Victron page here The Victron LiFePO4 Battery 12.8V/200Ah Smart Victron's small Lithium battery range is perfect for small off grid set-ups. This range weighs 70% less and 70% smaller than Lead acid batteries. Victron's Lithium Iron Phosphate (LiFePO4) 12.8V/200Ah smart batteries can be connected in series or parallel. A battery bank can be built for system voltages of 12 V, 24 V or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84kWh in a 12V system. The 12.8V battery consists of 4 cells connected in series. Features No need to fully recharge - LFP superior to lead acid  High efficiency 92% Excellent cycling performance Integrated cell balancing Low internal resistance Compact design and lightweight Wireless monitoring via the Victron Connect App Six tailored BMS solutions Wide operating temperature range Warranty: 5 years (extendable to 10 years) Specs Weight: 20 kg Nominal voltage: 12,8V Maximum Discharge: 400A Recommended Continuous Discharge: <200A Maximum Charge: 400A Recommend Charge Current: <100A Internal Resistance: 0.8mΩ Mounting: Can be placed on their sides Power Connection: M8 Dimensions: 237 x 321 x 152 mm Compatible BMS:

Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX (2400W) G98 approved #20: PMP242307010 Victron EasySolar Data Sheet Victron EasySolar Manual  To view our full range of Victron products visit our main Victron page here The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger • A SmartSolar MPPT -Tr solar charge controller • A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. • A USB port • An Ethernet port • A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.   The manual is available here: https://www.victronenergy.com/media/pg/EasySolar-II_GX/en/index-en.html The datasheet is available here: https://www.victronenergy.com/upload/documents/Datasheet-EasySolar-II-24V-48V-3kVA-48V-5kVA-MPPT-250-70-100-GX-EN.pdf

Victron EasySolar-II 48V 3000VA MPPT 250/70 GX #17: Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX (48V 3000VA) Victron EasySolar Data Sheet Victron EasySolar Manual  To view our full range of Victron products visit our main Victron page here All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring saving you time and space.The 24V model contains two of the superb Blue Solar MPPT 100/50, allowing up to three strings of PV panels to be connected with three sets of MC4 PV connectors. The 48V model includes two of the Blue Solar 150/35 MPPT controllers for larger PV arrays.The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.AC distribution The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.Inverter specs:Input Voltage Range: 19-33V (24V);Continuous Output Power at 25 degrees C: 3000VA/2500WPeak Power: 6000WMaximum Efficiency: 94%Zero-Load Power: 15-16WCharger specs:AC Input: 187-265VAC 45-65HZCharger Current: 70A (24V); 35A (48V)Solar MPPT ControllerMax PV Open Circuit Voltage: 100V (24V);Max PV Power: 2 x 1400W (24V);Max Output Current: 2 x 50A;Enclosure:Weight: 21kgDimensions (h x w x d): 362 x 374 x 218 mm

Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX (4000W) G99 approved #20: PMP482507010 Victron EasySolar Data Sheet Victron EasySolar Manual   To view our full range of Victron products visit our main Victron page here All-in-one solar power solution, 4000W inverter, 250/100 MPPT charge controller The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. The all-in-one solar power solutionThe Victron EasySolar-II GX integrates the following elements:• A MultiPlus-II inverter/charger• A SmartSolar MPPT -Tr solar charge controller• A GX device with a 2 x 16 character display.These elements come prewired together inside a single unit. This greatly simplifiesmost installations, saving time and money. Display and wifiThe display reads battery, inverter and solar charge controller parameters.The same parameters can be accessed with a smartphone or other wifi enabled device.In addition, wifi can be used to set up the system and to change settings. Solar charge controllerThe DC output of the SmartSolar MPPT is parallel wired with the DC connection of theMultiPlus-II inverter/charger.The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX deviceThe integrated GX device includes:• A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g.VE.Can MPPTs), or the port can be reconfigured via the Remote Console for usewith a compatible CAN-bus Li-ion Battery• A USB port• A Ethernet port• A VE.Direct portThe GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively aVE.Bus and a VE.Direct connection.

Victron MultiPlus-II 48/3000/35-32 230V Victron MultiPlus Data Sheet Victron MultiPlus Manual  To view our full range of Victron products visit our main Victron page here All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 3000VA (2400W) Peak Power: 5500W Maximum Efficiency: 95% Zero-Load Power: 2-11W AC Input: 187-265VAC 45-65HZ Max Charge Current: 35A (48V) AC Transfer Relay: 32A Dimensions: 506 x 275 x 147 mm Weight: 18kg Warranty: 5 years

Victron MultiPlus-II 24/3000/70-32 230V GX (2400W) Victron MultiPlus Data Sheet Victron MultiPlus Manual   To view our full range of Victron products visit our main Victron page here Victron MultiPlus-II GX inverter/charger with GX inside and on board display An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device. Remote monitoring is also possible.

Victron MultiPlus-II 48/5000/70-50 230V #17: Victron MultiPlus-II 48/5000/70-50 230V (48V - 70A Charger - 50A) Victron MultiPlus Data Sheet Victron MultiPlus Manual To view our full range of Victron products visit our main Victron page here All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 5000VA (4000W) Peak Power: 9000W Maximum Efficiency: 96% Zero-Load Power: 2-18W AC Input: 187-265VAC 45-65HZ Max Charge Current: 70A (48V) AC Transfer Relay: 50A Dimensions: 565 x 323 x 148mm Weight: 29kg Warranty: 5 years

Victron MultiPlus-II 12/5000/220-50 230V (4000W) #20: PMP122505010 Victron 230V GX Data Sheet Victron 230V GX Manual   To view our full range of Victron products visit our main Victron page here Victron Multiplus II 12V, 4kW inverter/charger for use off grid on or on grid with 220A AC - DC Charger The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).  It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control Monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more...

Victron MultiPlus-II 48/5000/70-50 230V GX #17: Victron MultiPlus-II 48/5000/70-50 230V GX (48V - 70A Charger - 50A) Victron 230V GX Data Sheet Victron 230V GX Manual  To view our full range of Victron products visit our main Victron page here All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 5000VA (4000W) Peak Power: 9000W Maximum Efficiency: 96% Zero-Load Power: 2-18W AC Input: 187-265VAC 45-65HZ Max Charge Current: 70A (48V) AC Transfer Relay: 50A Dimensions: 565 x 323 x 148mm Weight: 29kg Warranty: 5 years

Victron MultiPlus-II 48/8000/110-100230V #17: Victron MultiPlus-II 48/8000/110-100230V (48V - 110A Charger - 100A) Victron Data Sheet Victron Manual To view our full range of Victron products visit our main Victron page here All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10000VA (8000W) Peak Power: 18000W Maximum Efficiency: 96% Zero-Load Power: 38W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A (48V) AC Transfer Relay: 100A M8 bolts (2 plus and 2 minus battery connections) Dimensions: 677 x 363 x 206mm Weight: 49kg Warranty: 5 years

Victron MultiPlus-II 48/10000/140-100 230V #17: MultiPlus-II-48/10000/140-100 230V Victron 230V Data Sheet Victron 230V Manual To view our full range of Victron products visit our main Victron page here All-in-one solar power solution Here comes the newest generation straight from Victron Energy HQ in the Netherlands:- The MultiPlus-II Combining the functions of the incredible MultiPlus and the MultiGrid, it has all the features of the MultiPlus range, plus an external current transformer option to implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing (max. 32A). With a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. Reliability and performance are paramount to Victron. Features: A MultiPlus, plus ESS (Energy Storage System) functionality - all the functions of the MultiPlus range, with built-in anti-islanding and long list of worldwide country approvals PowerControl and PowerAssist - ability to set maximum generator or grid current, so that extra power is used for battery charging or limited peak power requirements. ESS - suitable for off-grid or grid connected PV systems On-site monitoring and control - settings can be changed in a matter of mins with an MK3-USB interface Remote Configuring and monitoring - Install a GX device to display on the VRM portal   Victron are a global leader in off-grid and battery storage systems, with over 40 years of expertise in the fields of renewable energy and portable power systems. We have been working with the Dutch company for many years now and have found the quality of their products second to none; the company is also renowned for it's community support and ease of contact.   Installation is a simple matter using the detailed instruction manual with fully illustrated colour wiring and mounting diagrams. The true benefit of the Multiplus is the software functionality and advanced protection systems, with regular firmware updates constantly adding new features as and when the community request them.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10000VA (8000W) Peak Power: 18000W Maximum Efficiency: 96% Zero-Load Power: 38W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A (48V) AC Transfer Relay: 100A M8 bolts (2 plus and 2 minus battery connections) Dimensions: 677 x 363 x 206mm Weight: 49kg Warranty: 5 years

Victron Quattro 48/10000/140-100/100 230V VE.Bus #17: Victron Quattro 48/10000/140-100/100 230V VE.Bus (48V - 140A Charger) Quattro 48 Data Sheet Quattro 48 Manual To view our full range of Victron products visit our main Victron page here The 10kW Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems.   The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc.   Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.   Specifications: DC Input: 38-66V (48V) Continuous Output Power: 10,000VA (8000W) Peak Power: 20,000W Maximum Efficiency: 96% Zero-Load Power: 10-35W AC Input: 187-265VAC 45-65HZ Max Charge Current: 140A AC Transfer Relay: 2 x 100A Dimensions: 470x350x280 Weight: 45kg Warranty: 5 years   Available in 48V models only.

Quattro 48/8000/110-100/100 230V VE.Bus #17: Victron Quattro 48/8000/110-100/100 230V VE.Bus Quattro 48 Data Sheet Quattro 48 Manual To view our full range of Victron products visit our main Victron page here The 8kW Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems.The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc.Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Specifications:DC Input: 38-66V (48V)Continuous Output Power: 8000VA (7000W)Peak Power: 16,000Maximum Efficiency: 96%Zero-Load Power: 8-35WAC Input: 187-265VAC 45-65HZMax Charge Current: 110A (48V)AC Transfer Relay: 2 x 100ADimensions: 470x350x280Weight: 41kg (48V)Warranty: 5 yearsAvailable in 24V and 48V models.

Victron Quattro 48/15000/200-100/100 230V VE.Bus #17: Victron Quattro 48/15000/200-100/100 230V VE.Bus (48V - 200A Charger) Quattro 48 Data Sheet Quattro 48 Manual   To view our full range of Victron products visit our main Victron page here The 15kVA Victron Quattro is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure. The bigger brother of the Multiplus range, this unit is designed for industrial and commercial systems with multiple AC sources and differential loading, in addition to larger 3-phase systems. The Quattro can take an inputs from a generator and grid supply. It can be used in conjunction with a battery bank and solar PV inverter as an energy storage system. The unit has two AC outputs, one being programmable to only operate when shore/grid power is available; designed for heavy loads such as washing machines etc. Up to 10 Quattro units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Specifications: DC Input: 38-66V (48V) Continuous Output Power: 15,000VA (12,000W) Peak Power: 25,000W Maximum Efficiency: 96% Zero-Load Power: 110W AC Input: 187-265VAC 45-65HZ Max Charge Current: 200A AC Transfer Relay: 2 x 100A Dimensions: 572 x 488 x 344 mm Weight: 72kg Warranty: 5 years Available in 48V models only.

Victron Lynx Power In M8 #17: Victron Lynx Power In Victron Lynx Distributor Manual  To view our full range of Victron products visit our main Victron page here A modular DC bus bar, used to connect batteries to the Lynx DC distribution system, with locations for four DC fuses. The younger brother of the Lynx Distributor - upgrade to this one if you would like LED indicators for each fuse. Part of the modular Lynx distribution system.Victron use the highest grade of components, robust and precise manufacturing procedures, and rigorous testing to ensure consistent high quality.